Error in using the Structure

Hi Experts,
I am using same structure in different queries, actually the two queries are same (but saved as with small changes).
In the structure of one query i have created one formula and assigning 0.
When i replicate the same in the other query i am facing an error "uncaught exception" and i am not able to run the query.
Can anyone help on this.,as this issue is critical would appreciate fast reply.
Regards

delete ur query b
save ur query a AND do SAVE AS and save it as query c
now make ur changes
make all small changes
and see if it let u do that.

Similar Messages

Error while creating the structure

hello friends,
i have two doubts
1)
i am getting the error while creating the structure in se11.
well i am creating the structure in the following way
in component i am giving the values as bom and in component type i am giving the value as meins.
i am getting the status warning message as the below
'field name does not agree with the proposed name base_bom for bapi table'
2)
and more over can we create the structure as the follwing in se11.
component = f1 and
component type = tablename-fieldname
when i am doing in the second way i am getting the error as the following table is not active though the table is active

hi guru,
just component name as --- your field name.
where as component type as give just data element k.
no need to give tablenme-fieldname k.
component component type .
f1 matnr----
data element
thanks anji.
Moderator message: please do not use SMS speak, what does that "k" mean, short for "OK"? please get your act together, these are professional forums.
Edited by: Thomas Zloch on Nov 15, 2010 9:10 AM

Error while using the export utility

Dear all of
I am getting the following error while using the export utility in the Oracle database 9i
I have run the catexp.sql and catrm.sql suggested by the experts in this forum. But it did not help me. Kindly help me in solving this issue.
FOLLOWING ARE THE ERROR ----------------------------
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
-----------------------------------------------------------------------------------------------------------------------------------

Can you go to this discussion please.
Re: Getting a strange error for Exp
-aijaz

ARM approval error after upgrading to SP14: Database error while using the secure store.

Dear GRC experts,
After upgrading GRC 10 to SP14, assigning manual passwords during the approval of a request, the approval process is failing.
Here is the scenario; your advice will be appreciated.
Task: Manually assign passwords to multiple systems contained in the request
Where: On the access request, go to “User System Details” tab
Issue: After approving/submitting the request, the error “Database error while using the secure store” is generated
Logs: Nothing on transactions SLG1 or ST22; however ST11 shows the error attached below:
This is the failed approval of the request:
Other scenarios executed as a workaround, and passed the password assignment this time:
The approval will work if only one password is assigned to any of the given systems. The rest of the systems get an auto-generated
password.
ARM also accepts multiple passwords when the requestor assigns passwords on the “User System Details” prior submitting a
request. The GRC admin can approve once reached for system approval.
AS FYI, “Confirm Password” is only required when creating the request but not on any other stage.
System information:
-Netweaver 7
-GRCFND_A SP14
-GRCPINW SP13
Regards,
Gustavo

SAP just delivered a note to fix this issue. The number is 2022294.

How to use the structure in the EXIT_SAPMM06E_013 function module

Hello Experts,
Please guide me how to use the structure defined in function modules under table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
Best Regards,
Sandesh.Sreyamsh

Can you please elaborate little bit more what is the actual requirement?

Multivalue error when using the previous() function

I am getting a multivalue error when using the previous() function on a dimension object in the report. I thought that the previous function was supposed to look at the current report and then look at the previous record's contents. How could this possibly give me a multivalue error when the value is clearly output in the previous row? Anyone have any ideas?
By the way, this is a valuable function for the types of reports that I design. The next() function would be even more valuable.
Thanks for your help.

Hi Michael,
Could you please test the following solutions it might help you to resolve the issue.
Solution1:
Use slice and dice to reset all the tables that have #multivalue in it. The only problem with this workaround is they have to do the formatting manually.
Solution2:
Also, test the issue by changing the object to dimension if it is a measure or to measure if it is a dimension.
Regards,
Sarbhjeet Kaur

How to use the structure RCTAV?

How to get demensions of a material in picking list using the structure RCTAV, is there any function module, please reply immediately.

Hi
Use the following BAPI's:
BAPI_OBJCL_GETDETAIL
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS
to get the characteristic values for a material
or use the tables AUSP, CABN etc for this
Reward points for useful Answers
Regards
Anji

TS1702 unknown error when using the app store

unknown error when using the app store

Im sorry I will try to be more clear.. and I appreciate all of ur input. Wi-fi works fine.. everything opens and functions fine on the I pad. The problem is I will click on app store or the I tunes store...it opens fine and I am able to look at and download apps etc... but after being in the appstore or I tunes store for a couple of minutes I get kicked out to the I pads home screen. Its like pushing the home button but I didn't. It only seems to do this when im in the app store or I tunes store. I have been using the chrome browser and other downloaded apps such as ebay just fine with out this problem occurring. Not sure about safari as I dont use it and use chrome instead. Um I don't think the home button its self is faulty because it works fine and as stated before this only happens when I am in the appstore or I tunes . I've only had this I pad 1 64gb wi-fi for a few days .. I got it off of ebay it was stuck in restore mode getting error code 1611. I was able to successfully Restore it with I tunes and it running ios 5.1. Seams to work great besides the problem being mentioned.

Intermittent error when using the Disco Viewer client

Hi, I have a user receiving the following intermittent error when using the Discoverer Viewer client:
“The application encountered an invalid state.
- Discoverer Beans XML Exception. Method: findNode Class: XMLUtils Error: Cannot find parent node. Parent element does not exist in XML document, looking for database_account/eul
OracleBI Discoverer Viewer was unable to find the necessary data for displaying the results of this event. Please correct any errors and try again.”
Any idea what this might be? Any help or direction would be very much appreciated! Thank you!

Hello
Is this related to a single machine or common to a single report or is it purely random?
I did a search on your behalf and came up with nothing related to this error. You may therefore need to raise the problem with Oracle Support.
Just out of curiosity which version of Discoverer are you using?
Michael

An impersonation error occurred using the security context of the current user. -- Report server is on remote server and file share folder is on local server

I have deployed a report on the server (e.g. remoteserver\reports) from my local machine. I opened the report in browser in my local machine and created a new subscription with windows file share delivery option.
But its giving an error "Failure writing file \\localserver\subscriptions\Report1.xls : An impersonation error occurred using the security context of the current user." Here "subscriptions"
is the folder which I have created in my local machine.
I followed the instructions found in the link "http://msdn.microsoft.com/en-us/library/ms157386.aspx"
Please help to solve this issue.

Hi,
Thank you for your reply.
I have followed the same process. The credentials which I have given are same as my PC. But I am getting the same error. Can you please clarify the statement "Service
account that is using for file share subscription should have write access to shared folder."
given in the above link?
I am the one who created the folder and subscribing the report, so probably I have the full write permissions to the shared folder. What is the service account in this context?
I think the problem is, I am deploying the report on the server and creating the shared folder in the local machine. I tried giving shared folder permissions to the user on the server. But my local machine is in local domain and I cant access the users on
the remote server. Do I need to create a shared folder on the server? I am new to SSRS. Please help me.
PS: I have assigned with all roles viz. Browser, Content Manager, Publisher, Report Builder etc. and My Role name (WEBSERVER\User)
is different from my local user name (domain\username) in domain.

Error in using the Socket Adapter while deploying the composite

I am going through a Socket Adapter sample given in Oracle JCA Adapters for Sockets"Oracle Socket Adapter Hello World".
This sample demonstrates inbound request/response and synchronous outbound request/response modes of communication using using Oracle Socket Adapter.
The HelloWorld business process takes an input string from the Socket Adapter inbound service and
publishes the message to the BPEL process.
The BPEL process invokes the Socket Adapter outbound service and returns the received string using synchronous reply.
Before going into this sample i did the configuration in the Weblogic server by following the steps below:-
1)Log into Weblogic server console
2)Click Deployments in the left pane for Domain Structure
3)Click Socket Adapter.The settings for SocketAdapter page is displayed.
4)Click the configuration tab
5)Click the Outbound Connection Pools tab, and expand java.resource.cci.ConnectionFactory to see connection
factories
6)Click eis/socket/SocketAdapter
7)Set the KeepAlive connection property to true
8)Save the setting.
After this i did the necessary configurations in the Socket Adapter Configuration Wizard(Inbound/Outbound).
The BPEL process has:-
1)A receive which receives input from a Socket Adapter which serves as an inbound synchronous service.
2)An invoke acitvity which invokes a socket adapter which serves as a outbound synchronous service.
3)Two Assign activites to do the necessary assignment.
After Deploying the sample i encountered with the following errors:-
<Sep 9, 2012 1:19:48 PM IST> <Error> <oracle.integration.platform.blocks.deploy.servlet> <SOA-21537> <Sending back error message: There was an error deploying the composite on soa_
server1: [JCABinding] [Middleware.ServerConnection/6.0]Unable to complete unload due to: Cannot locate Java class oracle.tip.adapter.socket.SocketInteractionSpec: Cannot locate Jav
a class oracle.tip.adapter.socket.SocketInteractionSpec..>
Can any one please tell me the solution for this error.
Edited by: 957910 on Sep 12, 2012 1:10 AM

Did you find a solution for this issue. I see the same error while deploying the same very sample code.

Error while using the variable name "VARIABLE" in variable substitution

Hi Experts,
I am using variable substitution to have my output filename set as a payload field value. It is working fine when I am using the variable name as fname, subs etc but channel goes in error when I am using the variable name as "VARIABLE". This is probably a reserved word but i would like to know where i can find a detailed documentation on this. Say things to note / restrictions while using variable substitution.
This is the error in the channel:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: java.text.ParseException: Variable 'variable' not found in variable substitution table
Thanks,
Diya

Hi Zevik,
Thanks for the reply. The output file is created correctly by merely changing the variable name to something else and hence the doubt.
Below is the configuration:
Variable Substituition
VARIABLE payload:interface_dummy,1,Recordset,1,Header,1,field1,1
Filename schema : TEST_%VARIABLE%.txt
Output xml structure:
<?xml version="1.0" encoding="utf-8" ?>
- <ns:interface_dummy xmlns:ns="http://training.eu.unilever.com">
- <ns:Recordset xmlns:ns="http://training.eu.unilever.com">
- <Header>
<identifier>HDR</identifier>
<field1>001</field1>
<field2>001</field2>
<field3>R</field3>
</Header>
- <Detail>
<identifier>A</identifier>
<field1>000000002</field1>
<field2 />
<field3>Doretha.Walker</field3>
</Detail>
I thimk my configuration is correct as it is working correctly with the variable name change, However, maybe i missed something !

Program error when using the Eyedropper tool on Win8/Photoshop CC (14.2.1)

After a year of using Photoshop CC (with many errors I still have to cope with) there is a new one. Whenever I use the color picker I get an error message, that the quest can not be done for a program error. I click close and I can use the new color but I can not see it in the tool bar preview. This really disturbs my flow while working a great deal (always clicking the error message away, never having a color preview). I am annoyed paying 25 € per month for so many error, just because Photoshop is considered a standard in the industry.

First Part System Info:
Adobe Photoshop Version: 14.2.1 (14.2.1 20140207.r.570 2014/02/07:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:10, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 2
Logical processor count: 4
Processor speed: 2494 MHz
Built-in memory: 3798 MB
Free memory: 1788 MB
Memory available to Photoshop: 3114 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
Font Preview: Medium
TextComposer: Latin
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
OpenGL Drawing: Enabled.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
AIFCoreInitialized=1
AIFOGLInitialized=1
OGLContextCreated=1
NumGPUs=1
gpu[0].OGLVersion="3.0"
gpu[0].MemoryMB=1962
gpu[0].RectTextureSize=16384
gpu[0].Renderer="Intel(R) HD Graphics 4000"
gpu[0].RendererID=4416
gpu[0].Vendor="Intel"
gpu[0].VendorID=4318
gpu[0].HasNPOTSupport=1
gpu[0].DriverVersion="10.18.10.3316"
gpu[0].Driver="igdumdim64.dll,igd10iumd64.dll,igd10iumd64.dll,igdumdim32,igd10iumd32,igd10 iumd32"
gpu[0].DriverDate="20131001000000.000000-000"
gpu[0].CompileProgramGLSL=1
gpu[0].TestFrameBuffer=1
gpu[0].OCLPresent=1
gpu[0].OCLVersion="1.2 "
gpu[0].CUDASupported=0
gpu[0].OCLBandwidth=0
gpu[0].glGetString[GL_SHADING_LANGUAGE_VERSION]="1.30 - Build 10.18.10.3316"
gpu[0].glGetProgramivARB[GL_FRAGMENT_PROGRAM_ARB][GL_MAX_PROGRAM_INSTRUCTIONS_ARB]=[1447]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_UNITS]=[8]
gpu[0].glGetIntegerv[GL_MAX_COMBINED_TEXTURE_IMAGE_UNITS]=[96]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_TEXTURE_IMAGE_UNITS]=[16]
gpu[0].glGetIntegerv[GL_MAX_DRAW_BUFFERS]=[8]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_FRAGMENT_UNIFORM_COMPONENTS]=[4096]
gpu[0].glGetIntegerv[GL_MAX_VARYING_FLOATS]=[64]
gpu[0].glGetIntegerv[GL_MAX_VERTEX_ATTRIBS]=[16]
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_PROGRAM]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_SHADER]=1
gpu[0].extension[AIF::OGL::GL_ARB_FRAGMENT_SHADER]=1
gpu[0].extension[AIF::OGL::GL_EXT_FRAMEBUFFER_OBJECT]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_RECTANGLE]=1
gpu[0].extension[AIF::OGL::GL_ARB_TEXTURE_FLOAT]=1
gpu[0].extension[AIF::OGL::GL_ARB_OCCLUSION_QUERY]=1
gpu[0].extension[AIF::OGL::GL_ARB_VERTEX_BUFFER_OBJECT]=1

Error when using the method cl_gui_frontend_services= file_open_dialog

Hello Experts,
I am currently practicing BDC and I think the first step is to locate where my text file is. Now based on my code below, after selecting my text file nothing happens.
Also, what will be my next after getting the file from a specific location? Thanks guys!
REPORT z_aris_practice_bdc_0
 NO STANDARD PAGE HEADING
 LINE-SIZE 255
 LINE-COUNT 64
 MESSAGE-ID zz.
*BDC Data
DATA: BEGIN OF bdc_tab OCCURS 0.
 INCLUDE STRUCTURE bdcdata.
DATA: END OF bdc_tab.
*Internal Table
DATA: BEGIN OF it_input OCCURS 0,
 user TYPE usr02-bname,
 title TYPE sza5_d0700-title_medi,
 lname TYPE addr3_data-name_last,
 fname TYPE addr3_data-name_first,
 initials TYPE addr3_data-initials,
 nickname TYPE addr3_data-nickname,
 function TYPE addr3_data-function,
 END OF it_input.
DATA: gt_lines TYPE sy-tabix,
 gt_file TYPE filetable,
 wa_file TYPE filetable,
 gt_subrc TYPE i.
*CONSTANTS
CONSTANTS: c_mask(60) TYPE c VALUE ',..'.
*Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_input LIKE rlgrap-filename.
SELECTION-SCREEN END OF BLOCK b1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_input.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
 EXPORTING
 WINDOW_TITLE =
 DEFAULT_EXTENSION =
 DEFAULT_FILENAME =
 FILE_FILTER =
 initial_directory = 'C:\Temp\'
 multiselection = 'X'
 CHANGING
 file_table = gt_file[]
 rc = gt_subrc
 USER_ACTION =
 EXCEPTIONS
 file_open_dialog_failed = 1
 cntl_error = 2
 error_no_gui = 3
 OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*START-OF-SELECTION
START-OF-SELECTION.
PERFORM put_in_itab.
PERFORM process_records.
*& Form get_files
 text
FORM put_in_itab.
DATA: lv_file TYPE string.
lv_file = p_input.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 filename = lv_file
 FILETYPE = 'ASC'
 has_field_separator = 'X'
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
 CODEPAGE = ' '
 IGNORE_CERR = ABAP_TRUE
 REPLACEMENT = '#'
 CHECK_BOM = ' '
 VIRUS_SCAN_PROFILE =
 NO_AUTH_CHECK = ' '
IMPORTING
 FILELENGTH =
 HEADER =
 TABLES
 data_tab = it_input
 EXCEPTIONS
 file_open_error = 1
 file_read_error = 2
 no_batch = 3
 gui_refuse_filetransfer = 4
 invalid_type = 5
 no_authority = 6
 unknown_error = 7
 bad_data_format = 8
 header_not_allowed = 9
 separator_not_allowed = 10
 header_too_long = 11
 unknown_dp_error = 12
 access_denied = 13
 dp_out_of_memory = 14
 disk_full = 15
 dp_timeout = 16
 OTHERS = 17
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
 DESCRIBE TABLE it_input LINES gt_lines.
ENDIF.
ENDFORM. "get_files
*& Form process_records
 text
FORM process_records.
LOOP AT it_input.
ENDLOOP.
ENDFORM. "process_records

Hii viraylab,
go throgh this link..This sample code solves ur problem....
/people/milind.upasani/blog/2007/03/07/step-by-step-approach-to-ceate-simple-bdc-session-program-using-reusable-template
 U are new to BDC it seems...
 first u read the sap help ... then u will come know what to do after wards....
 http://help.sap.com/saphelp_47x200/helpdata/en/fa/097720543b11d1898e0000e8322d00/frameset.htm
Be familiar with the structure BDCDATA.
Data transfers In this page..
Next u need to know about the transaction RECORDER the tcode is SHDB.
Nothing is difficult in this ..
For example When u r creating a data element in SE11 u go through some screens in a flow, by clicking some pushbuttons and by generating some function codes manually, and entering values manually...
But here u wont do it manually, these values will be populated from file into an internal table...
Before calling a transaction into which u r going to populate the data is to be filled into a table with structure BDCDATA.
U need to use CALL TRANSACTION 'SE11' using BDCDATA or
the session method..
Reward points for helpful answers...
sai ramesh

GET_FILTER_VALUES_CHA:3 Error when using the Filters

Hi All,
I get the below error messgage when trying to use the Filters in the web application. I checked the OSS notes (932154, 902393 & 832485) but didn't get a solution. This is a query on a Basic Cube.
SQL 904.
Error in SQL Statement.
SYSTEM ERROR CL_RSR_WWW_RENDERER and form space GET_FILTER_VALUES_CHA:3
Looking forward for some help in this regard.
BW Version: 3.5 SP15
Thanks & regards,
Sree

Hi,
It worked for me, I dont for your case.
Mine syptom:
When filtering by using the context menu's "keep filter" and then filter by using a "Hierarchy Web Item" (based on Calendar month),
then I was getting the message "System error in program CL_RSR_WWW_RENDERER and form SUBMIT_FILTER"
It is solved by adding a "Filter Web Item" to display the filter values. If you dont want that object in your report, you can hide it.
Vasso

Error in using the Structure

Similar Messages

Maybe you are looking for