Error in UWL when launching the corresponding workitem using webgui

Hi Folks,
I am trying to configure the UWL in EP6.0 almost everything is worked but at the last when i click on the work item in the UWL iview, it has to open the corresponding transaction in the R/3 webgui, instead of that it is giving the error as "  <b>Transaction *SWK1 is unknown "</b> if anybody of come across with this type of error, please put a solution here. It is little bit Urgent.
Thanks & Regards,
Sireesha.

Hi,
  Have u checked the same in the SAP GUI? If its working fine there, then there will not b any problem in Portal.Moreover check the configuration of UWL whether it is connected with the R/3 correctly.
Regards,
Sivagami

Similar Messages

  • Error: Internal Erorr when generating the history. Use a different view.

    Hello,
    When I am trying to open an workbook in BEX. I get the message: Internal Error when generating the history. Use a different view.  (production system)
    How can I solve this problem? And what could be the reason? In our Development and QAS everything is OK!
    Regards,
    Boyke

    hi
    If nobody have change or write access in prod, then
    ensure that everything is OK in QAS,
    Execute the workbook and views in QAS.
    If it works fine there, some thing is missing in the transported objects.
    Ensure everything is transported correctly
    Thanks
    N Ganesh

  • Error when Launching the Maintenance optimizer

    Hello,
    When launching the Maintenance optimizer of solman 7.1, in the step Cionfirm Target i got the following dump:
    The followin error text was processed in SD1 the systm: Value loss during allocation.
    The error occurred on the application server SD1ODYLSV1_SD1_00 and in the work process. 9
    The termination type was: RABAX_STATE
    The ABAP call hierarchy was:
    Method: GET_2ND_CHECK_RESULT of program CL_MO_SMP_ADAPTER=============CP
    Method: LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: IF_COMPONENTCONTROLLER~LOAD_IMPACT_ASC of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: ONACTIONLOAD_IMPACT of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/03N7KKG9LPWOUCQH4NOB==CP
    Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
    Method: IF_WDR_ACTION~FIRE of program CL_WDR_ACTION=================CP
    Method: DO_HANDLE_ACTION_EVENTS of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
    Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
    In the trace file of the Work process teh following error was found:
    A  ABAP Program CL_MO_SMP_ADAPTER=============CP        .
    A  Source CL_MO_SMP_ADAPTER=============CM00A      Line 19.
    A  Error Code CONVT_DATA_LOSS.
    A  Module  $Id: //bas/720_REL/src/krn/runt/abxacnv.c#4 $ SAP.
    A  Function ab_xaCloseSimpleR Line 725.
    A  ** RABAX: level LEV_RX_STDERR completed.
    A  ** RABAX: level LEV_RX_RFC_ERROR entered.
    A  ** RABAX: level LEV_RX_RFC_ERROR completed.
    A  ** RABAX: level LEV_RX_RFC_CLOSE entered.
    A  ** RABAX: level LEV_RX_RFC_CLOSE completed.
    A  ** RABAX: level LEV_RX_IMC_ERROR entered.
    A  ** RABAX: level LEV_RX_IMC_ERROR completed.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE entered.
    A  ** RABAX: level LEV_RX_DATASET_CLOSE completed.
    A  ** RABAX: level LEV_RX_ERROR_SAVE entered.
    A  ** RABAX: level LEV_RX_ERROR_SAVE completed.
    A  ** RABAX: level LEV_RX_ERROR_TPDA entered.
    A  ** RABAX: level LEV_RX_ERROR_TPDA completed.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
    A  ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
    A  ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
    A  ** RABAX: level LEV_RX_END entered.
    A  ** RABAX: level LEV_RX_END completed.
    A  exceeded soft limit for RUDILOCKS (user: SAPADMIN    , ta:                     )
    I tried to find something about the *RUDILOCKS * without success.
    Do you have any suggestion to resolve the issue?

    Hi,
    Check SAP note 1505832.
    Thanks
    Sunny

  • Error message (-41110) when launching Itunes

    rene.haller 
    Feb 24, 2013 4:30 AM 
    I have just downloaded the latest version of Itunes (or rather the latest update). And now I get an error message when i lauch Itunes: -(41110).
    However, it does not prevent me from actually using Itunes. It's just an error box that appears when Itunes is launched. Any idea?
    Windows 7 
    I have this question too (11) 
    Reply
    Categories: Installing, Removing and Upgrading
    Re: Error message (-41110) when launching ItunesFeb 24, 2013 4:10 PM (in response to rene.haller)
    Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s: iTunes: Advanced iTunes Store troubleshootin
    I have the question above, bwecause of this annoying problem and the aswear they cave does not solve my problem, the answer is not clear in what to do.....

    Removing the SC Info folder as per the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document seems to help most folks reporting the iTunes launch 42110s:
    iTunes: Advanced iTunes Store troubleshooting

  • Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

    Greetings All,
    I am having issues with a SharePoint Designer workflow.  This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow.  I'm developing this as a SharePoint 2010 workflow because I need to do
    impersonation.
    The environment and workflow have been running, in the past week, without issue.  I went to add a couple steps and now I cannot publish the workflow.  While in SharePoint Designer, I receive the error:
    "Errors were found when compiling the workflow.  The workflow files were saved but cannot be run."  When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow." 
    That is all the error information I have available; nothing is in the log files.
    I have investigated this error and tried the following:
    Cleared the SharePoint Designer cache.
    The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000.  Restarted the servers (which may not have been necessary) and tried again receiving the same error.  I then increased it to 30000 with the same error result.
    Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
    I reboot the servers and try again and now I can publish the small test workflow but not the original.  However, neither will run.  When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
    An unexpected error occurs.  I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
    Also, now no workflows can be published in this web app.  Not just the one I was working on but none of them!
    Does anyone have a clue what has happened to the SharePoint 2010 workflow service?  Or some suggestions for me to try?
    Thank you in advance for your help!
    Bob Mixon

    try these links:
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
    http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
    http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
    Hi Sagar,
    I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
    Your first link is specific to SharePoint 2013 workflows.
    Your second link refers to the UserDefinedWorkflowMaximumComplexity.  If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
    Your third link also refers to large workflows with many approval activities.  My workflow doesn't contain any approval activities.
    And you fourth link refers to 2013 workflows not 2010.
    My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
    Thank you...

  • 'Error 8 occurred when starting the data extraction program'

    Hello Experts,
    I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
    So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
    But when I check the extractor through RSA3, it looks fine.
    Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
    Thanks
    Regards,
    KP

    Hi,
    Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
    Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
    rgds,
    Edited by: Krishna Rao on May 6, 2009 3:22 PM

  • I am running CS6 on a 2014 21" IMac version 10.9.5.  I have an earlier version of Illustrator on CS4.  When launching the CS$ Illustrator the message says "License for this product has stopped working".  What can I do to get this to work?

    I am running CS6 on a 2014 21" IMac version 10.9.5.  I have an earlier version of Illustrator on CS4.  When launching the CS4 Illustrator the message says "License for this product has stopped working".  What can I do to get this to work?

    Mylenium,
    Before downloading CS4 again, how do I uninstall the versions that are currently on my Mac?
    Many thanks for your help!

  • BB 9900 - Activation failed. An error was encountered when sending the activation transmission

    Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi  or contact your service provider to change your service plan.  Regards,Sunil K

    sunilkesavareddy wrote:
    Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi  or contact your service provider to change your service plan.  Regards,Sunil KAre you sure you are connected to a BIS plan (BlackBerry Internet Service) ? Regular data plan will not work, ask Airtel if it's a BIS plan.

  • Errors/warnings occurred when generating the local proxy dll and VI wrappers for web service

    Hello,
    I'm new to web services - trying to import a WSDL that was created by an outside vendor and placed on a company server.  I imported a previous version successfully.  The error I'm getting doesn't make a lot of sense to me, here it is:
    The following errors/warnings occurred when generating the local proxy dll and VI wrappers for this web service.
    Can't generate files.
    Possible reasons are:
    1. The output file(s) might be read-only.
    Remove the read-only attribute and import the Web service again.
    2. A proxy DLL that LabVIEW created under the same file path exists in memory.
    Restart LabVIEW and import the Web service again.
    I don't see any read-only attributes on the output files and I've tried restarting LabVIEW - no luck.  Any help is greatly appreciated.
    Thanks,
    Al Rauch
    Merck & Co., Inc.

    Aaron,
    I was able to successfully import and run the web services from the WSDL file in question in LV2009 on a different computer than the one on which I had the original problem.  Unfortunately I am still having the original problem on the project computer and will need to get it working there . . . still looking for a solution to that.  Apparently LV2009 is perfectly capable of importing and running this WSDL file, but there is something still in the way on the project PC.
    Thanks,
    Al

  • Errors were found when compiling the workflow

    My company has consolodated many SharePoint sites into one with many subsites to save money. I ported my existing libraries from theold site to the new site (Same version of SP). The workflows did not go with the libraries, as expected. I re-created each
    workflow, and every time have gotten the same error message: "Errors were found when compiling the workflow. The workflow files were saved but cannot run."
    When I click Advanced I see some variation of the following:
    (-1, -1) Compilation failed. Could not find file 'C:\Users\TEMP.*domain*\AppData\Local\Temp\ **and then a different .dll file every time'
    I have not seen any other examples of this online. For some, creating a new task and history list for the workflow allowed it to compile, but not always.

    Hi,
    According to your post, my understanding is that Errors are found when compiling the workflow.
    I recommend that you can check whether the file exists under the path 'C:\Users\TEMP.*domain*\AppData\Local\Temp\”.
    If it exists, you can create a silmple workflow to check whether it works.
    If it does work, you can add executionTimeout property in web.config file to increase the timeout interval(Make a copy of the web.config file before editing anything).
    For more information, please refer to:
    Manjuke's Blog: Fixed: SharePoint Designer Error - Unexpected error on server associating the workflow
    SharePoint Designer 2010 Errors were found when compiling the workflow. The workflow files were saved but cannot be run. Unexpected error on server associating the workflow.
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Error 7 occurred when generating the data transfer program

    Hello All ,
    In Master Data Load Process Chain ,  we get error like
    1. System Response
        Caller 09 contains an error message.
    Diagnosis
    Error 7 occurred when generating the data transfer program for the requested InfoSource.
    System Response
    The data transfer is terminated.
    Procedure
    Check the SAP Support Portal for the appropriate Notes and create a customer message if necessary.
    Note : We faced this issue for two days now . Just repeating the load make it success .
    If any one faced and fixed this issue . Please let me know .
    Thanks in advance .

    Hi,
    . Initially goto transaction SE38, Run the program RSDS_DATASOURCE_ACTIVATE_ALL. Give your Datasource name, and source system and check the check box for "Only Inactive objects".
    This will actiavate the given datasource.
    2. Replicate the datasource in RSA1.
    3. Try to schedule the infopackage for the datasource which you have activated now.
    4. IF infopackage runs through, Repeat the process for all datasources ie uncheck the check box, which means it will activate all datasources for the source system.
    Also make sure that there will be enough Back Ground Processor available....
    Reduce the parallel process
    Thanks
    BVR

  • How do I uninstall and reinstall all of iMovie 10.0? When launched the screen is only a blank gray window.

    I was in the process of editing a video and the screen when to random lines.  After a restart, the computer is fine, but iMovie won't start up anymore.  When iMovie is launched there is only a blank grey window that is shown.  The menus are still accessable from the top of the screen, but the window never changes.  I deleted iMovie and reinstalled it from the App Store, but when launched the same thing happens. What other items need to be deleted and reinstalled? Has anyone else had a similar issue?

    I have a MacBook Air with an Intel HD 3000 graphics card.  To clarify, I was able to install and use iMovie 10.0.  Something happened while I was working in the program and iMovie crashed.  Now when I launch iMovie I only get a grey window, that typically would have shown the library of projects and preview screen.
    In old school Mac, there were preference files that could be corrupt and might need to be deleted.  But, I'm unfamiliar with all the extra files that have been installed when iMovie was installed.

  • WAD-Internal Error when generating the history. Use a different view!

    Hello,
    When i am trying to open the WAD(Webapplication designer), BEx Open Dialog is being displayed with the message "Internal Error when generating the history. Use a different view"
    how to solve this problem...?
    Thanks
    kumar

    Hello Jeff,
    Thanks for your help, and it has solved my problem. Under Activate Personalization in BEx...
    I have seen 2 more options
    -Variable Personalization
    -Web Reportperson
    Could you inform me the pupose of above 2 options?
    Regards..

  • I am getting error message A12E5 when installing the free 30 day trial for InDesign why?

    I am getting error message A12E5 when installing the free 30 day trial for inDesign...don't know why?

    don't know why?
    Neitehr do we. You are not offering any relevant technical info like what computer you are actually on or the exact error message.
    Mylenium

  • Exception when retrieving the WS invoker using the execution destination

    We got exception when we had tried to call WS in Web Dynpro for Java (NWDS 7.1 SP 5):
    "Exception when retrieving the WS invoker using the execution destination".
    We imported model as Adaptive Web Service Model with destination and
    implemented Component Controller using document
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e
    We used:
    1. Netweaver 7.1 CE
    2. Backend R/3 system with RFC wrapped by Web Service without autorization on R/3
    3. In our CE system we created two logical destinations (metadata and execution) to R/3 Web Service

    Hi Yuriy,
    It would be great if you can say how exactly you solved the problem as i am encountering the same error.
    Regards,
    Tekumalla

Maybe you are looking for