Error in V_RA: when I am trying to do Back orders processing

Hi ,
When I tried to do Back order processing with T.Code: VA05 , i am getting the error
Please check the entries. No work list selected
Message no. VR420
Diagnosis
No entries were found for the specified selection criteria.
Possible reasons for this:
Indexes for materials and business partners have not been updated
The organizational data or selection criteria are incorrect.
Procedure
Check whether all indexes have been updated. Check your organizational data and selection criteria as well.
I have seen the same issue in sales order level but its not solve my issue so can u plz guide me how to solve the issue
because i am getting this error while i am doing the back order

wanna Change the Confirmed Qunatity stock of particular Customer and reduce the quantity and increase the that stock to another customer sales order that is possible in sap through back order V_RA?
If this is your Q then yes it is possible. Procedure is as follows
Step1: you need to go to V_RA and select the order from which you need to reduce the stock. then reduce the stock from the order. This subsequently increase the material in your stock.
Step2: Go the the order to which you need to conform the stocks T code V_RA. You can fetch the stocks from inventory. Thus making your order conformed.
I hope your Q is answered.
Suhas
Edited by: suhas.ram on May 12, 2011 7:01 AM

Similar Messages

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or

I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html

Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium

I keep getting error code 4450 when I'm trying to burn a CD from itunes. It keeps my CD and won't eject it and says "cancelling burn" forever then itunes locks up and my cd is ruined and NO songs on it.

i can't burn cd's in iTunes anymore. I get error code 4450 when I'm trying to burn a playlist. Songs from my own cd's, or bought in iTunes (have not burned 7x's as I can't BURN any cd's at all!), Then my cd gets stuck in the drive. and it says "cancelling burn" forever and then itunes freezes up. I have a Dell with Windows 7.
-I've slowed down the burn as slow as it can go
-I have bought 3 different brands of cd's
-i have the latest version of iTunes.
Can someone help me?

I have Windows 7 on a Dell. Open and play iTunes in the compatability mode and use Windows XP (service pack 2). Disregard any messsages to disable the compability mode. This has worked for me. I have also reinstalled iTunes and played with burn speeds etc. These ideas did not work. Compatability mode works.

My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my

My iphone 5S is stuck on a screen displaying the itunes symbol and a charging cable. I tried connecting it to itunes and updating it to the new software, and backing it up but it keeps saying unknown error 4005, Also when I first tried backing up my phone on my computer it would begin the processes then half way through it would say IPHONE has been disconnected, now it won't recognize it or anything. what can i do? This is a brand new phone!!!

Hello jraff21,
I was able to locate a support article for the error you mentioned. The following steps may help you get your device back to working order:
iOS: Restore errors 4005, 4013, and 4014 - Apple Support
You may see one of these messages if the device unexpectedly disconnects during the update or restore or iTunes couldn't tell the device to go to the restore state.
The iPhone [device name] could not be restored. An unknown error occurred (4005).
The iPhone [device name] could not be restored. An unknown error occurred (4013).
The iPhone [device name] could not be restored. An unknown error occurred (4014).
Try these steps to resolve the issue:
Install the latest version of iTunes.
Restart your computer.
Make sure your computer is up to date. If an update requires a restart, check for updates again after you restart.
Restore using another USB cable.
Learn more about updating OS X.
Learn more about updating Windows.
Restore your device on another computer.
If you continue to see error 4005, 4013, or 4014 when you restore your device,contact Apple for support.
Learn more about other update and restore errors.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

Error FRM 0008 when it's trying to import universe to BOE XI R2 repository

When I try to import a universe to BOE XI R2 repository, Designer displays the following message: "You are not authorized to use this document (FRM00008)"
Problem: when re-install of BOE XI R2 on a new repository without access to the old repository.
Solution: http://jorgelorenzo.org/SBO/repair_universe_cms_import.doc

Hi Gavin,
Also... you could try creating the BIAR file by only selecting a few objects and see if this works. As Tim has mentioned, size also becomes a problem.
I has this before, exporting everthing from enterprise into the BIAR file and then when I wanted to import it back to the same server i.e used it as a backup, the BIAR file size on disk was big, but when I wanted to get access to the content, it there was nothing... just a big file.
If the small selections are working for you, then created seperate BIAR files for the objects etc.
Regards
Jacques

Getting Error ID 4625 when one service tries to access a shared path on another machine

Hi guys .. I have a scenario where there are two machines involved, both of which are using
Windows Server 2008 Standard. One is called the IS Server (has IP 10.1.1.89 and machine name bxtwmistv1) and the other is called the
MWS Server (has IP 10.1.1.88 and machine name bxtwmmwstv1). They are both part of the
infosix.root domain. Their users are also part of this domain. On the IS server, there is a drive, R:\, which is shared on the network through the UNC path
\\bxtwmistv1\R. On MWS server, there is a service called
MWS Service, which is supposed to access that shared folder \\bxtwmistv1\R. The MWS service is running using a domain username to start itself:
[email protected] On the IS server, I have given Full Control rights for the domain user [email protected], for the shared drive.
However despite doing all the above, MWS service is unable to access the shared folder, and when it tries to access it, I get the following error on IS Server's Event Viewer:
An account failed to log on.
Subject:
Security ID:
NULL SID
Account Name:
Account Domain:
Logon ID:
0x0
Logon Type: 3
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:
bxt1
Failure Information:
Failure Reason:
Unknown user name or bad password.
Status:
0xc000006d
Sub Status:
0xc000006a
Process Information:
Caller Process ID:
0x0
Caller Process Name:
Network Information:
Workstation Name:
BXTWMMWSTV1
Source Network Address:
10.1.1.88
Source Port:
55768
Detailed Authentication Information:
Logon Process:
NtLmSsp
Authentication Package:
NTLM
Transited Services:
Package Name (NTLM only):
Key Length:
0
I've tried my best to try and figure out what's wrong here, but I can't. Can someone tell me what might be the problem ?
Also, I tried logging into the MWS Server using the [email protected] domain user account (which the MWS service is using to start itself), and I was able to access the shared folder, and write to it as well.

According to the post of the error, the wrong domain name is specified for the service:
Account For Which Logon Failed:
Security ID:
NULL SID
Account Name:
svcWebDev
Account Domain:bxt1
But you said the accounts were: "They
are both part of the infosix.root domain"
Mark B. Cooper, President and Founder of PKI Solutions Inc., former Microsoft Senior Engineer and subject matter expert for Microsoft Active Directory Certificate Services (ADCS). Known as “The PKI Guy” at Microsoft for 10 years.

Error 1004 appear when I'm trying to download the Hidden Object: Gardens in times Please help to slove the matter.. Thank you

Appear "Error 1004" when trying to downloads all the apps in apps store....
Can't purchase the apps with the updated payment methods as well...
Please help and kindly advise further..
Thank you....

For Error 1004, look at this post
https://discussions.apple.com/message/16228784
 Cheers, Tom

HT204406 Why do I keep getting an error message (4002) when my match tries to match?

I just want to make sure it isn't something I'm doing wrong.

FIRST: COPY your itunes Library.itl and .xml files into a separate folder—just in case.
I don't know why you get the error, as I did. I do know I found another response (wish I could find it to give credit) that suggested turning Match off (Store > Turn off iTunes Match>), turn it back on again, and it should "reboot" Match, so to speak.I
The first time I tried this, I got a little worried when I saw that iTunes expected me to assign this computer to iMatch—it didn't recognize it. But I had no choice. When it opened, I found NONE of my Match data for my library of over 22,000 tracks.
I started over, and it was taking well over an hour to renew the process. I decided to drop it. I quit iTunes and restarted with the Option key to choose my backed-up earlier library (which had been getting 4002).
Today I decided to try again. I turned off Match, turned it back on, got worried again when I still had to assign the Mac to Match. I let it go through the process, and as I type this it's uploaded 71 of the final 85 items added since I began getting the error.
So I emphasize: BACK UP YOUR ITUNES LIBRARY FILES, just in case. My first time trying this may have been perfectly normal—as it seems to be today—but having that backup offers security.
Good luck! HTH.

An Unknown Error Occurred (-50) when I was tried to sync my iPod what do i do

I am using a hp computer with windows visa. I went to iTunes and checked off all the music I wanted, pressed apply and it started to sync. When it went to step 2/6 saying preparing to sync iPod and after it said transferring purchased items to 'iPod' a pop up shows up and said- The iPod "iPod" cannot be synced. An unknown error occurred (-50). How do I fix this?

Have a look at these two:
https://discussions.apple.com/thread/4204776?start=0&tstart=0
http://support.apple.com/kb/TS1539

An Unknown Error Occurred (-50) when I was tried to sync my iPhone

Hi everyone!
I would like to ask your help to fix this issue:
After I update my Macbook Pro (Late 2013) to OS X Yosemite and my iPhone 4S to iOS 8, I can not sync my iPhone with iTunes anymore, it gives me the following message:
The iPhone ... can not be synchronized. An unknown error occurred (-50).
I've already searched everywhere about this kind of error but, I didn't find any information about this specific situation.
Thank you for your time and share!

Hello there,
It sounds like you are unable to sync your iPhone to your computer. I would use the troubleshooting in the following article to help troubleshoot the issue:
Resolve iOS update and restore errors in iTunes
Thank you for using Apple Support Communities.
All the very best,
Sterling

Error code: 3194 when restoring.. "Secure link to iTunes store failed" when diagnostics is ran..

as mentioned in the title, I have encountered 2 errors, one is when I am trying to restore my iphone and the other when iTunes diagnotics feature is ran..
I have read the information about the diagnostics result and saw something like "connection attempt to firmware update server unsuccessful". Because of this information I have concluded that the "error code 3194" happens because iTunes itself is unable to connect to the "firmware update server".
I am using Windows 7 64-bit and iTunes is now on the latest version.
below are the things I have done so far, but to no avail:
- removed/disabled my antivirus program
- put iTunes to exception list of WIndows Firewall
- disabled windows firewall and windows defender
- re-installed iTunes and made sure that it is of the latest version (version 10.6.1)
- performed recommendation from: https://discussions.apple.com/message/17409780#17409780
- perform flush dns command using command prompt
In addition to the steps I mentioned, I also tried running the diagnostics on two other computers running on different versions on iTunes, 10.5 and 10.6.0. I also did the same steps as above on these two computers, but I am getting the "secure connection to iTunes store failed" when the diagnostics were ran.
thanks for any help that you can give.

I think its weird that I experienced both the 3194 error code and "secure link to the itunes store failed" diagnostics error on three computers running on different OS (XP, vista and 7), itunes version and connectivity types (wireless and cabled). Could it be possible that there is a problem on Apple's server?
Are you still there, shintenhouji?
Perhaps try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(I've seen a few cases in recent times of this sort of thing being associated with LSP issues.)

Error "Mutating table" when execute a trigger

Hi all,
I'm a newbie in oracle. Recently i do some database migration from sql server 2005 to oracle 11g. Some of my table are using trigger which is not running in oracle. It has error "mutating table" when i'm trying to update some table. According to some information i got from the internet this can be solve by creating 1 packages and 3 trigger, but i found this article http://www.oracle.com/technetwork/issue-archive/2008/08-sep/o58asktom-101055.html which confuse me much. It says that the trigger is not allowed to be used for multiple user, meanwhile my application was for multiple user. What should i do then ?
*sorry for my bad english

Hi,
Sorry for my late reply, below is one of my trigger that causes error. This trigger was automatically created when im doing the migration.
create or replace
TRIGGER "DBO_ORACLE_240312".tgrRwyPktUpd
-- =============================================
-- Author:          Debora Farah Rasul
-- Create date: 09.02.2012
-- Description:     Update Riwayat Pangkat untuk data SKCPNS/SKPNS
-- =============================================
AFTER UPDATE
ON RiwayatPangkat
FOR EACH ROW
DECLARE
v_temp NUMBER(1, 0) := 0;
BEGIN
IF NULL/*TODO:TRIGGER_NESTLEVEL()*/ > 2 THEN
RETURN;
END IF;
--SQL Server BEGIN TRANSACTION;
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE ( ( SELECT :NEW.isTrigger
FROM DUAL ) = -1 );
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
BEGIN
MERGE INTO SKCPNS
USING (SELECT :NEW.PegawaiID AS PegawaiID, :NEW.NoNota AS NoNota, :NEW.NoSK AS NoSK, :NEW.TglSK AS TglSK, :NEW.TMTPangkat AS TMTPangkat, :NEW.PangkatID AS PangkatID
FROM dual) src
ON (SKCPNS.PegawaiID = src.PegawaiID )
WHEN MATCHED THEN UPDATE SET NoNota = src.NoNota,
NoSK = src.NoSK,
TglSK = src.TglSK,
TMTCPNS = src.TMTPangkat,
PangkatID = src.PangkatID;
END;
ELSE
BEGIN
SELECT 1 INTO v_temp
FROM DUAL
WHERE ( ( SELECT :NEW.isTrigger
FROM DUAL ) = -2 );
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
IF v_temp = 1 THEN
BEGIN
MERGE INTO SKPNS
USING (SELECT :NEW.PegawaiID AS PegawaiID, :NEW.NoSK AS NoSK, :NEW.TglSK AS TglSK, :NEW.TMTPangkat AS TMTPangkat, :NEW.PangkatID AS PangkatID
FROM dual) src
ON ( SKPNS.PegawaiID = src.PegawaiID )
WHEN MATCHED THEN UPDATE SET NoSK = src.NoSK,
TglSK = src.TglSK,
TMTPNS = src.TMTPangkat,
PangkatID = src.PangkatID;
END;
END IF;
END IF;
MERGE INTO RiwayatGaji
USING (SELECT :NEW.PegawaiID AS PegawaiID, :NEW.NoUrut AS NoUrut, :NEW.NoSK AS NoSK, :NEW.TglSK AS TglSK, :NEW.TMTPangkat AS TMTPangkat, :NEW.PejabatPenetap AS PejabatPenetap, :NEW.MasaKerjaTh AS MasaKerjaTh, :NEW.MasaKerjaBl AS MasaKerjaBl, :NEW.PangkatID AS PangkatID, :NEW.JenisKP AS JenisKP
FROM dual) src
ON ( RiwayatGaji.PegawaiID = :NEW.PegawaiID
AND RiwayatGaji.isTrigger = :NEW.NoUrut)
WHEN MATCHED THEN UPDATE SET NoSK = src.NoSK,
TglSK = src.TglSK,
TMTSK = src.TMTPangkat,
PejabatPenetap = src.PejabatPenetap,
MasaKerjaTh = src.MasaKerjaTh,
MasaKerjaBl = src.MasaKerjaBl,
PangkatID = src.PangkatID,
JenisKenaikan = src.JenisKP;
END;
*Btw thank u for the reply :)

Payemment Card not been utillised for all 3 delivery Items when back order

Payemment Card not been utillised for all 3 delivery Items when the items are confirmed through Back order.
1 delivery item out of 3 are processed(Billed) with Paymet card.
But why not all 3 deliveries?
Thanks in advance for your valuable inputs.

There is an Order with number 123456 there were three deliveries generated 123,234, and 345.
Only one of those deliveries applied to the credit card(123).
There are products on backorder and when the backorder is relased, they invoice without the credit card.
Actually all above line items in Order 123456 are confirmed through Backorder.
But all three deliveries have to have been processd(billed) through Payement card.
only 123 is billed with Payement card while other 2 are billed through normal invoicing without Payement card.
Hope sir this is clear....
thanks in advance

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. Why?

I keep getting the message "An unknown error has occurred" when trying to sign in to the App Store. How do I solve this problem?

Make sure you have the correct country selected. Click the round flag icon bottom right side of the App Store window.

HT201303 An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

An unknown error has occurred when trying to sign in , and I know I putting in the correct info, this stinks can anyone help? Because apple isn't...

urgh... just noticed my previous post said i have mountain lion... i meant that i have snow leopard. no idea why i messed that up!
anyway, i just tried reinstalling snow leopard from the usb key that came with the computer. Then, I installed software updates until it told me there were no more updates. After that, I tried the app store again, and it still is giving me the unknown error. really irked by that. may have to take it back to the apple store yet again, to see if i can figure out why the app store won't work.

Error in V_RA: when I am trying to do Back orders processing

Similar Messages

Maybe you are looking for