Error in VA01: Message 00002 'Enter a valid value'
Hello Experts! When I try creating a sales order in VA01 after entering the order type and other mandatory information, I get the error message (no. 002 of class 00) saying 'Enter a valid value'. When I searched other threads in SCN with the same message, I found that this is probably because of authorizations or incorrect values in user parameters. I executed SU53 immediately after the message was issued and found that the check was successful. I even checked the profile parameters for my user ID and everything seems perfect. In fact, I was able to create sales orders until two days earlier and no user settings were changed since then. I tried creating orders from other user IDs and the same message is issued.
after entering the order type and other mandatory
information, I get the error message
If possible, share here after entering which mandatory field, system was throwing this pop up error.
G. Lakshmipathi
Similar Messages
-
Error message - KD199 Enter a valid value when Closing the Project at CJ20N
Hi All,
As I am trying to close a Project at CJ20N I have faced an error "Enter a valid value for the settlement type Message no. KD199"
I have tried to remove the settlement rules to one of its WBS element, but I could not. System shows the same message - KD1999.
Could you pls let me know how to resolve this to close the Project.
Thank you
ChanduHi Chandu,
I hope you have already setlted the project, since the system will not allow you to close the project unless there is Zero balance in the project. In this case, you can live without removing the settlement rule from any of the WBS element.
If there is any need to have this settlement rule removed, I suggest to change the settlemet profile to " Do not settle" and check once again. ( If there is any cost already posted, then repost the same to any other receiver.)
Hope this helps,
Srinivas Potluri -
Error in MDDataSetBW.GetCellData.Please enter a valid value for character
Hi All,
We have a mandotory prompt on 0FISCPER for Web I Report . The promt is present in the universe.
The query works fine in Dev , but in Quality it shows the following error
A database error occured. The database error text is: Error in MDDataSetBW.GetCellData. Please enter a valid value for characteristic 0FISCPER.. (WIS 10901)
The universe is on BW Query and the BW Query works fine.
Can someone please help on thisThanks Sathish for your input.
We have created report level prompts and facing this issue because we were selecting multiple values for prompts.
Its working fine for single selection. Is there any way to enable multi selection for the particular object at the BW end ?
Or else we have to create the prompts (Single selection) at the universe level.
Regards,
Pranay -
Cannot create RFQ : Please enter a valid value
Hi all,
Kindly help me in my problem. I was trying to create a RFQ from my RFI. However, upon clicking on the "Create Follow-on Document", the error message "Please enter a valid value" appears. This message also appears when I tried changing the RFI. Please help me. Thanks!
Thanks and Regards,
HappyHi All,
This was resolved after our patching
Thanks and regards,
Happy -
FV50-- Editing Option Error "Enter a valid value" Message 00002
Hello FI experts,
An user is trying to execute a tcode FV50 and clicking "Editing Options" to make changes to "Doc.Type option" from "Document type hidden" to "Enter with short name" under " Special functions for single screen transactions" section.
When the user clicks SAVE button in "Accounting Editing options" screen, user is getting the the error message "Enter a valid value".
Can anyone tell me how to change this option and resolve this error?
There are users they are successfully able to change it and I am even able to change the document type options without encountering this error.
Any help on this is much appreciated!
Thanks,
HimadamaDianne,
Thank you for your prompt response.
The user has done modifications in FB00 but issue is still there.
Could you elaborate more on what has to be done in this FB00 tcode?
Thanks much.
Thanks,
Himadama -
Hi,
Can anyone pls. help us figure out the problem with the newly created business partner master records? We get an "Enter a valid value" error message when the agent (user) tries to confirm the business partner in CIC. The user got the same error after she created another bp master record.
I created a third bp master record for the same customer but in another application server. I didn't get an error so I asked the agent to use this bp master record instead of the first 2. Unfortunately, the user got the abovementioned error again after editing the bp master record that I created in the original application server.
Hope you can help us.
Thanks in advance,
TheresaPerform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin -
Error message F5901-Enter Business Place Value
Hello Friends and experts,
I am trying to enter a cross company code vendor invoice posting (vendor line in one company and all the expense lines in multiple co.cds). When I try to post the entry I am getting error message F5901 - Enter Business Place Value.
The error is coming after we have upgraded to ECC 6.0 EHP5 from ECC 5.0 SP13.
I have checked the customizing. We have not activated Business Place functionality for any country in our system.
I did not even find any SAP note in this regards.
Does someone has any clue on what may be wrong and how to fix it?
Regards,
Vishal.Hi Tanmay,
You might have created a validation rule for Business place in order to track the TDS as per Business place. Please check it in GGB0 and OB28 and input the Business place at transaction level if needed.
Thanks -
ERROR BRAIN (599): for characteristic 0FISCPER Please enter a valid value
Hi,
Weve an BI 7.0 System with Patch Level SP12 which is previously connected to an NW 7.0 Portal System + BI Java that has SP13 installed.
Were able to create Queries and Web Templates via Query Builder and WAD for BI 7.0 and publish to portal.
Recently, weve installed a new NW 7.0 Portal + BI Java with same package level. We made the configurations for Bex via Template Installer and everything is ok.
Our reports has a 0FISCPER characteristics and when we run the reports in new portal, it displays the report. But when we want to change period and click the button created to set period, a popup opens and errors like "for characteristic 0FISCPER Please enter a valid value " displayed on popup.
#1.5#005056915E48007200000013000016D000044A7EAFACF8B0#1207807880509#com.sap.ip.bi.base.application.message.impl.MessageBase#sap.com/irj#com.sap.ip.bi.base.application.message.impl.MessageBase#bcepik#2422##sapportal_TFP_5354550#bcepik#96c2d31006c411ddae48005056915e48#SAPEngine_Application_Thread[impl:3]_31##0#0#Error#1#/Applications/BI#Plain###A message was generated:
ERROR BRAIN (599): for characteristic 0FISCPER Please enter a valid value
MSGV1: 0FISCPER
MSGV2: 200.001.#
When we change BIs Portal back to old one by changing the RSPOR_T_PORTAL table (default portal), it still works there.
What may be cause this situation as it works on one portal and not works on another?
Best RegardsHi,
Pls chk the Note 770174 - Values for 0FISCVARNT not correct - BRAIN E 599
Symptom
In case of web templates the value help for 0FISCYEAR doesnot work
correctly. Error message
For characteristic 0FISCVARNT, enter value in permitted format
comes up
Other terms
OLAP: F4 - 0FISCYEAR, 0FISCVARNT ,
0fiscyearvalues_generate, master data read class , value help , F4
Reason and Prerequisites
Program error
The selection option sent to the method 0fiscyearvalues_generate
based on 0FISCVARNT are not porcessed and hence as null row is
inserted in the resultset that cause the problem .
Solution
BW3.0B
Import Support Package 24 for Release 3.0B (BW3.0B Patch 24 or SAPKW30B24) into your BW system. The Support Package will be available when note 0723193 with the short text "SAPBWNews BW 3.0B Support Package 24", describing this Support Package in more detail, is released for customers.
BW3.1C (Content)
Import Support Package 18 for Release 3.1C (BW3.1C Patch 18 or SAPKW31C18) into your BW system. The Support Package will be available when note 0723260 with the short text "SAPBWNews BW 3.1C Support Package 18", describing this Support Package in more detail, is released for customers.
BW 3.50
Import Support Package 9 for Release 3.50 (BW3.50 Patch 09 or SAPKW35009) into your BW system. The Support Package will be available when note 0763335 with the short text "SAPBWNews BW SP09 NetWeaver'04 Stack 09", describing this Support Package in more detail, is released for customers.
This note may already be available before the Support Package is released. However, the short text will still contain the words "preliminary version" in this case.
Hope this helps,
Regards
CSM Reddy -
We are having a custom WebADI, containing a field (Employee Name) which is a LOV.
The LOV has ID : Person ID, Meaning : Employee name, Description : Position Name.
There are multiple records with same Employee name but different Person ID.
If I select an Employee in the LOV which has multiple records (through different IDs), I am getting an error in WebADI:
"Enter a valid EMPLOYEE_NAME.
XX is invalid. Enter a valid value for the Mapping column EMPLOYEE_NAME"
The Query for the LOV is correct and is returning correct records.
Any pointers on this issue highly appreciated.Hi,
The problem could be with HR security profile attached to the responsibility from where you are launching the spreadsheet. Check it once.
Thanks. -
Error in LSMW : Enter a Valid Value
Dear All,
I am Creating a LSMW for MM01 Transaction using Direct Batch Input Method
I got an error in LSMW while I start uploading saying "Enter a Valid Value" .
I am selecting 14 Views in a single LSMW.
Basic Data1 / Data2 , Purchasing , Foreign Trade : Import Data, MRP1,2,3 , General Plant 1/2 , Accounting 1 & 2 , Costing 1 & 2.
Can anybody tell me why I am getting that error.
Thanks in Advance.
TulasiPerform theses steps
- In LSMW read and convert only one entry from file
- go to SM35 -> select your session with that one entry
- select process , option process/foreground
- choose process
You will have that batch input run in the foreground, so you can see all the values entered to certain input fields and all the actions which take place in that screens. This way you should see which step excatly creates the error.
Regards
Marcin -
SM30: "Enter a Valid Value" Issue?
When I do an SM30 to maintain a table, the cursor jumps to a field, a yes or no field, and says enter a valid value. When I cjheck the possible values for this it is N or Y, exactly like is in the field? I am not sure what SAP is giving me the message for.
Thank-You.How is the yes/no field declared in the table? Typically a yes/no or true/false field is set as a "X" for true or yes, " " for false or no.
-
Hi,
I have a licensed copy of Adobe Photoshop CS6 Extended, it is okay when I enter the serial number in the application but when I try to register it online with it comes up with an error message "enter a valid serial number"?Hi Ashutosh,
I am talking about registering the product in MyAdobe not the application. The application accepts the serial number, however, online registration is not accepted. The myAdobe ID is [email protected] and the serial number is [serial number removed]. I have 2 adobe IDs how can I transfer the applications from one ID to my preferred ID and have the [email protected] ID removed? Sorry for the two questions.
[Mod note - serial number removed.] -
MSA - creating/changing activity for bp error : enter a valid value for bp
Hello experts,
while using msa with activites, on one client for one bp
I cannot create/change an activity: error:
insert a valid value for bp
This happens only for one bp on this client,
on other clients this bp works fine.
When I look in old activites for this bp, there in activity -> detail
the field bp (hyper link) is not filled.
I think there is a problem with the incorrect bp, but in which tables
can search for this ?
Best regards
GerdHi,
I assume that the BP is present in table smokna1 but not available in smokna1sht (anymore).
When creating an activity the BP selection is based on smokna1, but the field/property validation is based on smokna1sht (see error message).
But unfortunately I don't have any idea for now how to download this particular record to this site...
Regards,
Wolfhard -
Hi!
I get the message "Enter a valid date ".
Whats wrong ?
Can u please help. Or do you know another FM
for such purposes ?
I must be able to populate various date formats
e.g 04/24/2007, 04-24-2007 .....
Regards
sas
data s type sy-datum.
*04/24/2007
CALL FUNCTION 'CONVERT_DATE_TO_INTERNAL'
EXPORTING
date_external = '04/24/2007'
IMPORTING
DATE_INTERNAL = s
write s.Hi Erdam,
Go through this simple code, i have not used any function module for date conversion.
PARAMETERS:
p_date(10) TYPE c.
DATA w_date(8) TYPE c.
w_date0(4) = p_date6(4).
IF p_date0(2) > 12 OR p_date3(2) LE 12.
w_date4(2) = p_date3(2).
w_date6(2) = p_date0(2).
ELSEIF p_date0(2) LE 12 OR p_date3(2) > 12.
w_date4(2) = p_date0(2).
w_date6(2) = p_date3(2).
ENDIF.
WRITE w_date.
best regards
Anup. -
How to "force" user to enter a valid value in a TextBox
How can one create a TextBox in which the user is not able to leave (commit the value, change focus, or perform the action of another control) unless a valid value (the value to be committed) is displayed?
The following is the best I've come up with so far.
Good: It doesn't permit a value to be committed unless it is valid.
Good: It doesn't permit the focus to be changed when TAB is pressed unless it is valid.
Bad: It permits the user to perform the action associated with a button at any time.
In the following code pressing on the button prints "I've been pushed", no matter the value of the TextBoxes. Can I stop this (in general, not for specific buttons)?
class ValidTextBox extends TextBox {
public-init var validValue:String = "";
function isValid():Boolean {
return (rawText == validValue);
var isFocused = bind focused on replace {
if (not focused and not isValid()) {
requestFocus();
override function commit():Void {
if (isValid()) { super.commit(); }
else {};
var string1:String = "" on replace { println ("String1 = '{string1}'") };
var string2:String = "" on replace { println ("String2 = '{string2}'") };
def textbox1 = ValidTextBox { text: bind string1 with inverse; promptText: "String1: enter abc"; columns: 20; validValue: "abc"; }
def textbox2 = ValidTextBox { text: bind string2 with inverse; promptText: "String2: enter def"; columns: 20; validValue: "def"; }
def aButton = Button {
text: "Push me";
action: function():Void { println("I've been pushed!"); }
Stage {
scene: Scene {
width: 250
height: 300
content: [ VBox { spacing: 10; content: [ textbox1, textbox2, aButton ] } ]
}It sounds like you are looking for a concept of validation that groups items together. In days long gone Oracle used to have a product called Oracle Forms - that had field validation, record validation and block validation. So in your example if string1 and string2 were in the same persistable data object then the equivalent concept would be 'record validation'. The code in your button would say "if the record is valid print". A record is only valid if all its fields are valid.
JavaFX really provides a 'GUI toolkit'. I think you are looking for a fairly advanced binding framework - a framework that builds on the concept of field level validation. You can approximate such a thing by creating a 'validation group' class. This class would be able to have nodes added to it and have an 'isValid()' function which only returns true if all the node items are valid.
Maybe you are looking for
-
When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?
-
Mail w/attachments are received in body of mail
I have an imac G5, Mac OS X (10.5.8), mail 3.6. When I send an e-mail with an attachment, either a photo or a document, to a PC user, old or new, the attachment is received and shown in the body of the mail. There IS NO attachment; NO paper clip;
-
What is the trick to get Page Flows (.jpf) files to be put in an .ear file from within Workshop 8.1 ? When I do "Build EAR" from the menu, the build happens fine, but when I expand the EAR file, the JPF file is not there ? All the associated JSP's ar
-
Can u suggest a photo/art collection for Mac?
I'm using Pages (Pages 1) to make some posters/brochures/programs for a conference. I am looking for high-res photos to use to make a 2' x 3' poster, as well as some photos/art to use for the programs. When I've found great photos to purchase (throug
-
How to have AP1232 pass user IP to ACS and reflect in the radius log?
Currently, we are able to get the User-Name [radius attribute 1] to reflect in the ACS log. A debug radius at the AP show this radius attribute is passed back to ACS. However, cannot seem to find the attribute to pass user IP address back to the ACS.