Error in Validation Business Rule

Hello Experts,
I am trying to perform validation on Intercompany Account Receivable and Account Payable accounts. For the same I added the Validation business rule, but getting an error while trying to save and validate the business rule. The error is:
Error = "No Data to Validate"
I have data in these accounts that I am performing validation on. Also, I am able to save and validate the Validation Rules Table.
Experts, could you please provide suggestions regarding why I am getting this error and how to resolve it.
Thanks
Rahul

Hello,
is this with the Product Hyperion Financial Management?
If yes, you might close the issue here and post it in the HFM group.
Regards,
Philip Hulsebosch

Similar Messages

Error while validating Business Rule (Error Cause: nativeGetNewTLA Rule)

Hi, I am receiving an error while validating business rules
An error occurred in: Rule:HypLive.Plan1.Product Interest
A validation error was received from the Planning server 'http://abc:8300/HyperionPlanning/servlet/HspAppManagerServlet?appname=HypLive'.
'Error:
Error Cause: nativeGetNewTLA Rule HypLive.Plan1.Product Interest'.

Are you able to validate the rule in EAS (or Calc Manager)?
Normally nativeGetNewTLA Rule is followed by out of memory errors like java.lang.OutOfMemoryError,
Increase the heap size to 1024, re start Planning and try validating it again.
Cheers..!!

Error while validating Business rules in EAS

Hi,
Iam new to hyperion. I created business rule in EAS (using a user with businessrule admin role). when i tried to validate the same, it gives an error message like *"Unable to validate or run this business rule. Detail:Exception occurred. Please check your log file for details"*. So wats the actual problem.
Thanks in advance.

Sounds like you have not added security to the rule. Before you assign security you must set the Location in the Location tab, this is the db you want to run the BR on (you can also use 'Allow all Locations')
Then you must goto security tab and assign users / groups to the BR, once you have done this the BR should validate and run.
J

Error while migrating business rules

While trying to use the export/import option in EAS to migrate business rules, we have run into an error.
The export itself is fine. When trying to import, it says this:(even though it lets me select the proper xml file for importing)
Error while migrating business rules.
Detail: The import file specified is not a valid business rules xml file. Import will be terminated.
Detail:Exception occured. Please check your log file for details.
I am pretty sure I used the inherent format specified for exporting the business rules.
Both the old and new systems are version 11.1.2.
The LCM method also failed for the business rules migration.
Any suggetions?
Thanks,
Sujani

When you export them make sure you don't have "For Calc Mgr" checked, if you do then the import with fail.
Cheers
John
http://john-goodwin.blogspot.com/

Validation Business Rule Problem

Hi Community
I´m working with SAP BPC 7.0 NW SP09 Consolidation, the problem I have is when I execute the validation package, the result of the Validation Rule because the business rule don´t respect the number sign of the value calculated.
For example I try to confirm this formula ASSETS = LIABILITIES + EQUITY
ASSETS      AST   1000
LIABILITIES LEQ     800
EQUITY        LEQ     400
RESULT                  -200
BUSINESS RULE      200
I was investigating all the posible combinations of dimensions, and I found it could be possible that this error occurs when (Liabilities + Equity) > Asset.
Rule
VAL01     ASSETS=LIABILITIES
Rule Details
Validation Account     Account 1     Flow 1     Sign 1     Account 2     Flow 2     Sign 2     REMARK
VAL01     ASSETS     F_CLO     1     LIABILITIES     F_CLO     1
ASSETS and LIABILITIES are configures as part of dimlist property, where Liabilities have all the equity accounts too.
Hope anyone help me with this problem
Thanks in advance

Hello Ruben
If Account: VAL01 is 'AST' account than Validation Business Rule will give 200 as the result.For 'LEQ' result will be -200.
I think the business rule is working as expected.
Hope this help.
Regards
Venkatesh KPS

Validation business rule

Hi,
I am trying to reconcile account 1 with accounts 2 to 8 with a validation business rule. When I define the rule, I have one line with account 1 and account 2 filled and another 6 lines with only account 2 filled. This creates an error on validating the rule.
How can I create such a validation rule?
Thanks,
Arnold

Instead of using a validation rule I have set this up as an account transformation rule which works just as well and doesn't generate any errors.

Validation business rule on a cumulative basis with periodic data storage

Hi BPC Experts,
Is it possible to set up a validation business rule on a cumulative basis when we have periodic data storage type?
Appreciate your assistance with this.
Thanks.
Mila

Hi Mila
Please could you tell me how you solved the issue?
We have it the other way round, a YTD storage, but would like to validate accounts on a periodic basis.
Thanks for sharing your findings.
Melanie

Error Handling in Business Rule

Hi,
In my Business rule, I want to handle the error with respect to the Run Time Prompt value entered by USer at the time executing the Rule.
How can i display and customize that message.
Ex: IF( <cond> is True)
execute the logic
ELSE
display an error message in the run time prompt pop-up
ENDIF
In my current logic i implemented , it is executing the logic if the Condition is true but if condition is not ture then it is closing the running pop-up and displaying a message in the web form "<Rule Name> was successful"
Any thoughts how to handle this!!!!
Regards,
KP

Hi,
Unfortunately you cannot raise custom error messages from business rules to Planning web client. I suggest you check what you can do with validatedata.js. It provides you with custoomization facility which you can utilize for raising custom messages based on the values on the form.
Cheers,
Alp

Validation Business rules..

Hi all,
          Does the validation business rules work on parent/ calculated members of other dimension other than the account and the account flow..
im using the accounts
SOURCE..
ACCOUNT              ACCOUNTFLOW      OTHERDIM1
SR10313000     F_CLO                        NONE1
DESTINATION
ACCOUNT              ACCOUNTFLOW      OTHERDIM1
SA10411200     F102                           PARENT
SA10411200     F103                           PARENT
which   PARENT has a CHILD1 AND CHILD2 children.....
Thanks..

Hi,
I don't think business rules work on parent or calculated members( though I haven't tried it), as business rules are developed using SQL stored procedures, which use the data in relational data base( fact tables), not the analysis server and fact table only has values of base members..
if any one has tried this scenario, may be they could share more knowledge.
Kranthi

SAP BPC 5.1 Validation Tolerance in Validation Business Rules

I am trying to use the the validation tolerance field in the validation business rules and I make it work
This is how i understand it:
For example, I am trying to create a control that check that net assets = equity in the balance sheet with a tolerance of 10.
I have set up the following validation rule header and detail:
Header: CTRL1 ;validation operand = ; validation tolerance 10; all other fields are blank
Details: CTRL1; account1=netassets;flow1=F_CLO;SIign1=1;account2=equity;flow2=F_CLO;sign2=1
After running the validation package:
If my netassets-equity=9--> i should see CTRL1=0
If my netassets-equity=-5--> i should see CTRL1=0
If my netassets-equity=15--> I should see CTRL1=15
Is my understanding correct? Has anyone been able to use the validation tolerance?
Regards
Lena

In addition to James comments, I just wanted to add a few additional notes:
1. The Demo application that was presented contains the applications that you described in your question. Historically, the consulting team would either use the ApShell or the demo as the foundation for developing a set of applications for the customer based on the design sessions held with the customer. BAsed on the customer requirements and design, often we start with ApShell and pull in components from the Demo that would support functionality requirements that may go beyond what Apshell has out of the box. Many of these components are covered in an Advanced Training for BPC, including the helpful and not so helpful components.
2. You can pull many of the Demo dimension files, logic scripts and rules from the Application Server file folders for use in an Application set design. Unfortunately, BPF's can not be transfered, since they are built in to an application and reside in tables in SQL. In addition, many BPF's need to be defined to meet a customers requirements, file names, location, users, and dimension structure.
3. Many of the dimensions utilize several supporting properties that may be added via the admin console to any dimension. The properties are a key ingrediaent to a well running application set, supporting reporting, script logic, and business rules.
4. The Performance dashboard is no longer an option that is included out-of -the-box, howvere it is just a shell that was adjustable to the application set designed for the customer.

Error validating business rules containing variable from another plan type.

We have created few business rules in in plan type "Plan1" which we are using variable from plan type "Capex". This is how we are using it.
"(@XREF(cpx,"Intangible Assets Finite, Gross","Unspecified","No Project","Information Technology (IT)","371064911-01"))"
But when we validate this rule it gives the following error
"An error occurred in: Rule:IFLJAN13.Plan1.B - Trail Balance - Capex
A validation error was received from the Planning server 'http://hptstorg:8300/HyperionPlanning/servlet/HspAppManagerServlet?appname=IFLJAN13'.
'Error:The member 'Unspecified' cannot be found.
The member 'Unspecified' cannot be found.
The member 'Intangible Assets' cannot be found.
The member 'Unspecified' cannot be found.
The member 'Unspecified' cannot be found. Rule IFLJAN13.Plan1.B - Trail Balance - Capex'."
We have checked the location aliases using EAS Console and they are correct.

Could you pls. check if you can see your BR in the location for the cube where you are unable to validate the rule?! (EAS console --> Administration --> Locations --> (right click) open)
your user must be able to "validate or launch" the rule in this location (changeable with "Add Access Privileges") and the rule itself must be able to launch in this location (changeable with "Add rules").
Kind regards
André

Error Validating Business Rule in Calculation Manager (@_AT) ?

I have migrated an 11.1.1.3 business rule and two macros (templates) into Calculation Manager 11.1.2.2. When I validate the script I get the following error. Has anybody seen this before or have any guidance? The script syntax checks ok.
"An error occurred in: Rule:FCO_3YrBud_DGAlloc Error:Error parsing formula for [FIX STATEMENT] (line 24): Expected [(] found [@_AT] after function name Rule FCO_3YrBud_DGAlloc "
Line 24 is the first FIX statement in the script show below:
SET UPDATECALC OFF; SET AGGMISSG OFF;
%Template(name:="FCOm_TargetSection",application:="FCO",plantype:="FCO",dtps:=("parm1":=([["Three Year Budget"]]),"parm2":=([["DGAllocation"]]),"parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))
%Template(name:="FCOm_TargetAgg",application:="FCO",plantype:="FCO",dtps:=("parm1":=([["Three Year Budget"]]),"parm2":=([["DGAllocation"]]),"parm3":=([[{FCOrtpYears}]]),"parm4":=([[Mar]])))
First template:
SET UPDATECALC OFF; SET AGGMISSG OFF;
FCOm_TargetSection
parm1 = scenario
parm2 = version
parm3 = years
parm4 = periods
The purpose of this macro is to translate Target input to GBP and copy to Curr NA and aggreggated. Step1: Copy inputs to Total Section to I/P Total Section and No Project Step1: Copy inputs to Converted Currency - no need to translate as all inputs are in GBP Step2: Copy Input GBP values to Curr NA
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),@IDESCENDANTS("BH - T"), "Curr NA", "Baseline","Entered Currency","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Total Section" TO "Input_Total Section";
DATACOPY "Total Section" TO "No Project";
ENDFIX
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),@IDESCENDANTS("BH - T"), "Curr NA","Total Section", "Input_Total Section", "No Project","Baseline","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Entered Currency" TO "Converted Currency (GBP)";
ENDFIX
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),@IDESCENDANTS("BH - T"), "Total Section","Input_Total Section","No Project", "Baseline", "Entered Currency","Converted Currency (GBP)","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Curr NA" TO "Input GBP";
ENDFIX
Second template:
FCOm_TargetAgg
parm1 = scenario
parm2 = version
parm3 = years
parm4 = periods
The purpose of this macro is to aggreggate Target data Step2: Aggregate data
FIX(([["Three Year Budget"]]),([["DGAllocation"]]),([["FY15"]]),([[Mar]]),"Baseline","Entered Currency","Converted Currency (GBP)")
CALC DIM("Account","BudgetHolder","Input Currency","SectionProjects");
ENDFIX

Actually
I have just been re thinking about your post. My comments above may not be correct for your situation. The Syntax above is correct if you are talking about the code "within" the template itself (So if you open the template and look at the code). But if the code you posted in your messages was from the script window of the rule (When in script mode) then your problem is something different potentially.
So the first thing is to make sure that in the template itself (template open) the DTPs are defined in the global range or member range as [Parm1],[Parm2] etc (Or fix, depending on how the template is shown) as I said in my first response above, the template only defines the DTP, not the members and should be enclosed in square brackets, like [Parm1}. That will make sure the DTP as defined in your template correctly. Then we need to look at how you are defining those DTPs in the rule itself. Normally this is a lot easier if your rule is in graphical view, as you just click on the template and your can enter the values. As you have your rule in Script mode you need to be very careful in how you define the DTP values. Each DTP 'type' has different syntax in script mode.
On looking at your script again I can see another problem potentially. When defining the values in the DTP's, the value needs enclosing with double square brackets, like so [["Three Year Budget"]]. In your script you also have parenthesis. Which isn't always correct. There are times having parenthesis and double brackets is correct, but that is only when your DTP is type "Members", and by default I think old business rule macros will be translated into templates with the DTP types of "Script"
So if you also amend your business section where the templates are defined to as below; (as you can see, no parenthesis around the DTP values).
SET UPDATECALC OFF; SET AGGMISSG OFF;
%Template(name:="FCOm_TargetSection",application:="FCO",plantype:="FCO",dtps:=("parm1":=[["Three Year Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))
%Template(name:="FCOm_TargetAgg",application:="FCO",plantype:="FCO",dtps:=("parm1":=[["Three Year Budget"]],"parm2":=[["DGAllocation"]],"parm3":=[[{FCOrtpYears}]],"parm4":=[[Mar]]))
The end game should be that when you open your rule and view in script mode and then select script tab down the bottom your templates should look as below, as you will see, all that should be shown in the script are the values substituted from the template definition, key point is that there are no brackets or Parenthesis. The script should show "pure" script. ( I have highlighted and underlined how those 4 DTPs should translate in the script view)
First template:
SET UPDATECALC OFF; SET AGGMISSG OFF;
FCOm_TargetSection
parm1 = scenario
parm2 = version
parm3 = years
parm4 = periods
The purpose of this macro is to translate Target input to GBP and copy to Curr NA and aggregated. Step1: Copy inputs to Total Section to I/P Total Section and No Project Step1: Copy inputs to Converted Currency - no need to translate as all inputs are in GBP Step2: Copy Input GBP values to Curr NA
FIX("Three Year Budget","DGAlocation",FY15,Mar,@IDESCENDANTS("BH - T"), "Curr NA", "Baseline","Entered Currency","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Total Section" TO "Input_Total Section";
DATACOPY "Total Section" TO "No Project";
ENDFIX
FIX("Three Year Budget","DGAlocation",FY15,Mar,@IDESCENDANTS("BH - T"), "Curr NA","Total Section", "Input_Total Section", "No Project","Baseline","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Entered Currency" TO "Converted Currency (GBP)";
ENDFIX
FIX("Three Year Budget","DGAlocation",FY15,Mar,@IDESCENDANTS("BH - T"), "Total Section","Input_Total Section","No Project", "Baseline", "Entered Currency","Converted Currency (GBP)","A - 6111","A - 6112","A - 6113","A - 65","A - 66","A - 620905")
DATACOPY "Curr NA" TO "Input GBP";
ENDFIX
Thanks
Anthony

Error while integrating Business rules (decision service) in BPEL

hi'
from some time I am struggling to integrate Business Rules with BPEL, I was successfully able to integrate it also.
however now once again the same error has started coming.
If it try to deploy the BPEL process it will give built failed but the BPEL process will come in the BPEL console
and after passing the parameter it will give unable to find the decision service WSDL file.
please advice what is the issue some time it works perfectly some time it shows error while deploying.
error:
Buildfile: D:\Oracle-SaaS\Downloads\jdevstudio10134\jdev\mywork\OEA\OEADetermineApproverBPEL\build.xml
[java] Java Result: 1
validateTask:
[echo]
| Validating workflow
[validateTask] url is file:/D:/Oracle-SaaS/Downloads/jdevstudio10134/integration/bpm/support/files/WorkflowTaskDefinition.xsd
[validateTask] Validation of workflow task definitions is completed without errors
deployProcess:
[echo]
| Deploying bpel process OEADetermineApproverBPEL on bg1ws0044, port 80
[deployProcess] Deploying process D:\Oracle-SaaS\Downloads\jdevstudio10134\jdev\mywork\OEA\OEADetermineApproverBPEL\output\bpel_OEADetermineApproverBPEL_1.1.jar
[deployProcess] Successfully deployed the process "OEADetermineApproverBPEL" on server "bg1ws0044" and port "80"
deployTaskForm:
[echo]
| Deploying workflow form for OEADetermineApproverBPEL on bg1ws0044, port 80
[deployTaskForm] 09/08/05 18:48:40 Notification ==>Application Deployer for default_OEADetermineApproverBPEL_1_1_HumanTask1 STARTS.
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:40 Notification ==>Copy the archive to C:\product\10.1.3.1\OracleAS_1\j2ee\oc4j_soa\applications\default_OEADetermineApproverBPEL_1_1_HumanTask1.ear
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:40 Notification ==>Initialize C:\product\10.1.3.1\OracleAS_1\j2ee\oc4j_soa\applications\default_OEADetermineApproverBPEL_1_1_HumanTask1.ear begins...
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:40 Notification ==>Unpacking default_OEADetermineApproverBPEL_1_1_HumanTask1.ear
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:40 Notification ==>Done unpacking default_OEADetermineApproverBPEL_1_1_HumanTask1.ear
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:40 Notification ==>Unpacking workflowform.war
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Done unpacking workflowform.war
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Initialize C:\product\10.1.3.1\OracleAS_1\j2ee\oc4j_soa\applications\default_OEADetermineApproverBPEL_1_1_HumanTask1.ear ends...
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Starting application : default_OEADetermineApproverBPEL_1_1_HumanTask1
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Initializing ClassLoader(s)
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Initializing EJB container
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Loading connector(s)
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Starting up resource adapters
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Initializing EJB sessions
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Committing ClassLoader(s)
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Initialize workflowform begins...
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Initialize workflowform ends...
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Started application : default_OEADetermineApproverBPEL_1_1_HumanTask1
[deployTaskForm]
[deployTaskForm] 09/08/05 18:48:42 Notification ==>Application Deployer for default_OEADetermineApproverBPEL_1_1_HumanTask1 COMPLETES. Operation time: 1422 msecs
[deployTaskForm]
[deployTaskForm]
[deployTaskForm] BindWebApp error: javax.management.ReflectionException
[deployTaskForm]
BUILD FAILED
D:\Oracle-SaaS\Downloads\jdevstudio10134\jdev\mywork\OEA\OEADetermineApproverBPEL\build.xml:97: Error while deploying the form on server "bg1ws0044" Error message :
java.lang.SecurityException
     at oracle.ide.IdeCore$7.checkExit(IdeCore.java:177)
     at java.lang.Runtime.exit(Runtime.java:88)
     at java.lang.System.exit(System.java:868)
     at oracle.oc4j.admin.deploy.cmdline.Oc4jAdminCmdline.executeCommand(Oc4jAdminCmdline.java:141)
     at com.collaxa.cube.ant.taskdefs.DeployForm.deployIAS(DeployForm.java:818)
     at com.collaxa.cube.ant.taskdefs.DeployForm.deployForm(DeployForm.java:578)
     at com.collaxa.cube.ant.taskdefs.DeployForm.deployForms(DeployForm.java:849)
     at com.collaxa.cube.ant.taskdefs.DeployForm.execute(DeployForm.java:875)
     at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
     at org.apache.tools.ant.Task.perform(Task.java:364)
     at org.apache.tools.ant.Target.execute(Target.java:341)
     at org.apache.tools.ant.Target.performTasks(Target.java:369)
     at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1216)
     at org.apache.tools.ant.Project.executeTarget(Project.java:1185)
     at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:40)
     at org.apache.tools.ant.Project.executeTargets(Project.java:1068)
     at oracle.jdevimpl.ant.runner.AntLauncher.launch(AntLauncher.java:321)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter.runAnt(InProcessAntStarter.java:295)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter.mav$runAnt(InProcessAntStarter.java:43)
     at oracle.jdevimpl.ant.runner.InProcessAntStarter$1.run(InProcessAntStarter.java:71)
Total time: 8 seconds

hi',
I am able to deploy it successfully the problem was with version,the form also got successfully deployed according to the build,
when I tried to run the JSP page, below is the OC4J Server log and next is the error on the IE.
OC4J Server log
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
D:\jdevstudio10131\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config>
D:\jdevstudio10131\jdk\bin\javaw.exe -client -classpath D:\jdevstudio10131\j2ee\home\oc4j.jar;D:\jdevstudio10131\jdev\lib\jdev-oc4j-embedded.jar -Dhttp.proxyHost=nandiisa.sonata.local -Dhttp.proxyPort=8080 -Dhttp.nonProxyHosts=172.23.*|172.23.0.60|*.sonata.local|localhost|127.0.0.1|bg1ws0044 -Dhttps.proxyHost=nandiisa.sonata.local -Dhttps.proxyPort=8080 -Dhttps.nonProxyHosts=172.23.*|172.23.0.60|*.sonata.local|localhost|127.0.0.1|bg1ws0044 -Xverify:none -DcheckForUpdates=adminClientOnly -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config D:\jdevstudio10131\jdev\system\oracle.j2ee.10.1.3.39.84\embedded-oc4j\config\server.xml
[waiting for the server to complete its initialization...]
Aug 6, 2009 2:54:20 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Aug 6, 2009 2:54:20 PM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Ready message received from Oc4jNotifier.
Embedded OC4J startup time: 10201 ms.
Target URL -- http://172.23.19.80:8988/OEA-BPELProcessforApproval-context-root/HumanTask1/form/war/HumanTask1.jsp
09/08/06 14:54:25 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
WARNING: Code-source C:\product\10.1.3.1\OracleAS_1\bpel\lib\xmlparserv2.jar (from <classpath> in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\public_html) has the same filename but is not identical to /D:/jdevstudio10131/lib/xmlparserv2.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar). If it contains different versions of the same classes, it will be masked as the latter is already visible in the search path of loader current-workspace-app.web.OEA-BPELProcessforApproval-webapp:0.0.0.
09/08/06 14:54:30 log4j:WARN No appenders could be found for logger (collaxa.cube.services).
09/08/06 14:54:30 log4j:WARN Please initialize the log4j system properly.
<2009-08-06 14:54:30,245> <ERROR> <oracle.bpel.services.workflow> <::>
java.lang.NullPointerException
     at oracle.xml.parser.v2.XMLReader.pushXMLReader(XMLReader.java:358)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:287)
     at oracle.bpel.services.common.util.AbstractJaxbUtil.unmarshal(AbstractJaxbUtil.java:125)
     at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:60)
     at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
     at oracle.bpel.services.config.ConfigurationManager.getProperty(ConfigurationManager.java:119)
     at oracle.bpel.services.config.ConfigurationManager.getBooleanProperty(ConfigurationManager.java:170)
     at oracle.bpel.services.common.exception.ServicesException.<clinit>(ServicesException.java:61)
     at oracle.bpel.services.config.ConfigurationManager.init(ConfigurationManager.java:79)
     at oracle.bpel.services.config.ConfigurationManager.getConfiguration(ConfigurationManager.java:101)
     at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit>(VerificationService.java:151)
     at oracle.bpel.services.workflow.query.impl.TaskQueryService.<clinit>(TaskQueryService.java:78)
     at oracle.bpel.services.workflow.client.JavaWorkflowServiceClient.getTaskQueryService(JavaWorkflowServiceClient.java:77)
     at humantask1.form._war._HumanTask1._jspService(_HumanTask1.java:92)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:453)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:591)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:515)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
     at java.lang.Thread.run(Thread.java:595)
<::> ORABPEL-30028
<::>
<::> Invalid configuration file wf_config.xml
<::> The configuration file wf_config.xml not be read.
<::> Make sure that the configuration file wf_config.xml is available and is a valid XML document. Contact oracle support if error is not fixable.
error on the IE.
500 Internal Server Error
oracle.classloader.util.AnnotatedNoClassDefFoundError:      Missing class: com.collaxa.common.util.Base64Encoder     Dependent class: oracle.bpel.services.workflow.verification.impl.VerificationService     Loader: current-workspace-app.web.OEA-BPELProcessforApproval-webapp:0.0.0     Code-Source: /D:/jdevstudio10131/integration/lib/bpm-services.jar     Configuration: <classpath> in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\public_htmlThe missing class is not available from any code-source or loader in the system.     at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2068) [D:/jdevstudio10131/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]     at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1679) [D:/jdevstudio10131/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1635) [D:/jdevstudio10131/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]     at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1620) [D:/jdevstudio10131/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@14916158]     at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap:1.5.0_06]     at oracle.bpel.services.workflow.verification.impl.VerificationService.encryptString (VerificationService.java:1924) [D:/jdevstudio10131/integration/lib/bpm-services.jar (from <classpath> in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\public_html), by current-workspace-app.web.OEA-BPELProcessforApproval-webapp:0.0.0]     at oracle.bpel.services.workflow.verification.impl.VerificationService.createTokenFromMap (VerificationService.java:1806) [D:/jdevstudio10131/integration/lib/bpm-services.jar (from <classpath> in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\public_html), by current-workspace-app.web.OEA-BPELProcessforApproval-webapp:0.0.0]     at oracle.bpel.services.workflow.verification.impl.VerificationService.<clinit> (VerificationService.java:145) [D:/jdevstudio10131/integration/lib/bpm-services.jar (from <classpath> in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\public_html), by current-workspace-app.web.OEA-BPELProcessforApproval-webapp:0.0.0]     at oracle.bpel.services.workflow.query.impl.TaskQueryService.<clinit> (TaskQueryService.java:78) [D:/jdevstudio10131/integration/lib/bpm-services.jar (from <classpath> in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\public_html), by current-workspace-app.web.OEA-BPELProcessforApproval-webapp:0.0.0]     at oracle.bpel.services.workflow.client.JavaWorkflowServiceClient.getTaskQueryService (JavaWorkflowServiceClient.java:77) [D:/jdevstudio10131/integration/lib/bpm-services.jar (from <classpath> in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\public_html), by current-workspace-app.web.OEA-BPELProcessforApproval-webapp:0.0.0]     at humantask1.form._war._HumanTask1._jspService (_HumanTask1.java:89) [D:/jdevstudio10131/jdev/mywork/OEA/BPELProcessforApproval/output/.jsps/ (from *.jsp in D:\jdevstudio10131\jdev\mywork\OEA\BPELProcessforApproval\output\.jsps), by current-workspace-app.web.OEA-BPELProcessforApproval-webapp.jsp22074838:0.0.0]     at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.1.0) ].http.OrionHttpJspPage.service (OrionHttpJspPage.java:59) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at oracle.jsp.runtimev2.JspPageTable.service (JspPageTable.java:453) [D:/jdevstudio10131/j2ee/home/lib/ojsp.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at oracle.jsp.runtimev2.JspServlet.internalService (JspServlet.java:591) [D:/jdevstudio10131/j2ee/home/lib/ojsp.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at oracle.jsp.runtimev2.JspServlet.service (JspServlet.java:515) [D:/jdevstudio10131/j2ee/home/lib/ojsp.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at javax.servlet.http.HttpServlet.service (HttpServlet.java:856) [D:/jdevstudio10131/j2ee/home/lib/servlet.jar (from <code-source> (ignore manifest Class-Path) in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by api:1.4.0]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.invoke (ServletRequestDispatcher.java:711) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.ServletRequestDispatcher.forwardInternal (ServletRequestDispatcher.java:368) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:866) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:448) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.serveOneRequest (HttpRequestHandler.java:216) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run (HttpRequestHandler.java:117) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].server.http.HttpRequestHandler.run (HttpRequestHandler.java:110) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run (ServerSocketReadHandler.java:260) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket (ServerSocketAcceptHandler.java:239) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at oracle.oc4j.network.ServerSocketAcceptHandler.access$700 (ServerSocketAcceptHandler.java:34) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:880) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at com.evermind[Oracle Containers for J2EE 10g (10.1.3.1.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run (ReleasableResourcePooledExecutor.java:298) [D:/jdevstudio10131/j2ee/home/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in D:\jdevstudio10131\j2ee\home\oc4j.jar), by oc4j:10.1.3]     at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap:1.5.0_06]

Validation - Business Rule or/and UJ_Validation

Hi experts,
I'm on BPC 7.5 NW, I'm facing problem to construct a simple validation where I need to compare the amount from one parent account against to other. Let's explain the business scenario and after the technical solutions.
Business Scenario
Compare the Total Assets is equal to the Total Liabilities. The Total Assets is represented by a parent account "1", the Total Liabilities is represented by a parent account "2". If it is different show a warning.
This is need to trigger, after the Actual Transactional Data Load + Journals.
Technical Solution
Application: Legal
Dimensions: Empresa (Entity), Conta (Account), Fonte (C_DataScr), Versao (C_Category), Groups, Intco, MesAno (Time), TipMov (Flow), CCusto (User Defined), CLucro (User Defined)
1 - Business Rule
Validation Definition
Validation Account         Remark                       Validation Operand           Other destination dimension Members                              Validation Tolerance
ZATIVO_X_PASSIVO     Ativo x Passivo                       =                           CONTA=VALIDATIVPASS,INTCO=SPTOTAL,CLucro=ACTEDUMMY,CCusto=ACTENONE                0
Account 1                    Flow 1                  Sign 1               Account 2                 Flow 2                       Sign 2             Remark
1                           TMTOTAL*                  1                          2                        TMTOTAL*                    1                  Ativo x Passivo
*The TMTotal Flow is a parent from every data on the master data TipMov (flow)
Validation.lgf
*RUN_PROGRAM VALIDATION
    CATEGORY = %VERSAO_SET%
    CURRENCY = %GROUPS_SET%
    TID_RA = %MESANO_SET%
    OTHER = [ENTITY=%EMPRESA_SET%]//For More than one other scope parameters: OTHER = [ENTITY=%ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
Result
When I run with this parameters I receive the message : "UJP_PROCESS_EXCEPTION:Data for category not found in application LEGAL"
2 - Validation with UJ_Validation
Assign the driver dimension to Legal - in case I used the CONTA (Account)
Rule Maintenance
Assigned Member: "1" and "2"
Use Logic Table
Dimension = Empresa (Entity)
Operator "="
Members = TECSA - This is a parent from every Entities.
Result
When I run with this parameters I receive the message : "UJP_PROCESS_EXCEPTION:Data for category not found in application LEGAL"
3 - Validation with UJ_Validation and BADI
Assign the driver dimension to Legal - in case I used the CONTA (Account)
Rule Maintenance
Assigned Member: "1" and "2"
Use BAdI Implementation
BADI_UJ_VALIDATION_RULE_LOGIC
Create a Enhancement ZATIVO_X_PASSIVO
Filter
Rule_Num = 1
APPSET_ID = ZTECSA
DIMENSION = CONTA
Class
METHOD if_uj_validation_rule_logic~do_validation_logic.
FIELD-SYMBOLS:
                   <field1> TYPE ANY,
                   <field2> TYPE ANY.
ASSIGN COMPONENT 'FIELD1' OF STRUCTURE is_data TO <field1>.
ASSIGN COMPONENT 'FIELD2' OF STRUCTURE is_data TO <field2>.
IF <field1> NE <field2>.
    es_message-message = 'Error in Validation'.
    es_message-recno = 1.
    es_message-MSGTY = 'W'.
ENDIF.
ENDMETHOD.
And add this line to the script
*START_BADI_UJ_VALIDATION_RULE_LOGIC~DO_VALIDATION_LOGIC
QUERY = ON
WRITE = ON
*END_BADI
Result
Data Region:
[WARNING!] NO MEMBER SPECIFIED FOR DIMENSION:CCUSTO WILL QUERY ON ALL BASE MEMBERS.
[WARNING!] NO MEMBER SPECIFIED FOR DIMENSION:CLUCRO WILL QUERY ON ALL BASE MEMBERS.
[WARNING!] NO MEMBER SPECIFIED FOR DIMENSION:CONTA WILL QUERY ON ALL BASE MEMBERS.
[WARNING!] NO MEMBER SPECIFIED FOR DIMENSION:FONTE WILL QUERY ON ALL BASE MEMBERS.
[WARNING!] NO MEMBER SPECIFIED FOR DIMENSION:INTCO WILL QUERY ON ALL BASE MEMBERS.
[WARNING!] NO MEMBER SPECIFIED FOR DIMENSION:TIPMOV WILL QUERY ON ALL BASE MEMBERS.
[WARNING!] MEASURES IS NOT SPECIFIED!
So what could I make to maintain all my options to do what I need ?
I appreciate any help
Best Regards
Alexandre Mendoza Collepicolo

Hi,
Just to check, can you try and hardcode the category in the rules itself...just for a test to see if it is working.
You can have the category mentioned as CATEGORY=ACTUAL in the rules itself for Other source dimension members and other destination members. J
This is to check if the validation package runs successfully or not.
Thanks,
Sreeni

Network error in the business rule

Hello, Experts!
I have created a business rule, validated it but when I launch it, I get the message:
+"The client or server timed out waiting to receive data using TCP/IP. Check network connections. Increase the NetRetryCount and/or NetDelay values in the ESSBASE.CFG file. Update this file on both client and server. Restart the client and try again."+
The business rule works fine once I remove the following statement from it: @MEMBER(@CONCATENATE("A_", @SUBSTRING(@NAME(@CURRMBR("Entity")),6))) but it produces this error with this statement and I cannot do without this statement to perform the required calculation.
I would be very grateful for any hints on how to resolve it!

Hi,
Try creating manually the update rule.
Regards
Rahul Bindroo

Error in Validation Business Rule

Similar Messages

Maybe you are looking for