"Error in validation" in order replication from ECC to CRM.

Hi,experts,we always have a problem,that is the "Billed" status can not be replicated to CRM from ECC(We excute billing in ECC).
In the BDOC we always have error message "Error in Validation (Details: transaction SMW01)".
I found the preceding contract of the order had been locked by the middleware user.
Is it related with the BDOC validation??
Can anybody suggest?
Thanks.
Jerry

Hi,
Please unlock Queue using SMQ1 ( Outbound ) & SMQ2 (Inbound Queue)
First try using SMQ1 & SMQ2 in CRM then try in ECC.
Regards,
Rajendra Sonawane

Similar Messages

  • Order replication from ECC to CRM

    Hi All,
    The requirement is we have different order types for example, ZOR, ZGW, KE in ECC out of which we would like to replicate only ZOR order type orders. So I used Adapter SALESDOCUMENT in CRM and set filters with AUART (Order type) EQ ZOR and ERDAT (Creation Date) GE '04/05/2010' so my assumption is if any ZOR order is created after 04/05/2010 they will replicate to CRM.
    And I created transaction type ZOR in CRM and ZGW, KE are not created in CRM as I do not need them. I checked CRMFILTAB and the filters are there but the issue is:
    Everytime I create ZOR order in ECC these order are replicating fine. There are 2 BDOCs generated R3AD_'CUSTOMER' and CSA_ORDER_'Order number' successfully...so far so good.
    Whenever I create any order with ZGW, KE Orders, even these orders are trying to replicate to CRM and getting failed as we do not have ZGW, KE Order types in CRM. The BDOC is R3AD_XXXXXXX is failing with the following error messages.
    -->Processing of document with Guid A6BE324C3C92B353E10000000AFEC80C is canceled
    -->Business transaction type ZGW does not exist
    -->Validation error occurred: Module CRM_DOWNLOAD_BTMBDOC_VAL, BDoc type BUS_TRANS_MSG.
    For example, if the order is created for customer 7719, In SMQ2, R3AD_0000007719 as failed and this is blocking all other 7719 customer related changes. How to make these other orders not even try to replicate to CRM and fail.
    Please advise.
    Thanks,
    Sharath.

    Hi Shekar,
    Thanks for the Reply.
    Here are my versions
    CRM --- CRM 2007
    ECC --- ECC 6.0
    I know we are eligible for Scenario A but I haven't activated the Scenario A settings as of now. What we did was, we made the message in ECC from Error to Warning so that it'll allow us to change the order created in CRM. I wasn't aware of the scenarios during that time as I was new to CRM, recently I went through and need to activate them in the system.
    In CRMPAROLTP Table, these are entries I have
    CLIENT     PARNAME                                                          PARNAME2                         PARNAME3             CONSUMER
    300          CRM_EXIT_BEF_DATA_TRANSFER                 CONDITIONS                       CONDITIONS              CRM
    300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTACRMB                                               CRM
    300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTAIPMI                                                   CRM
    300          CRM_EXIT_CRM_GET_QNAME                         BEABILLSTAIPMO                                                 CRM
    300          CRM_EXIT_CRM_GET_QNAME                         BUPA_REL                                                             CRM
    300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUAG_MAIN               CRM
    300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUPA_MAIN                CRM
    300          CRM_FILTERING_ACTIVE                                 BUPA                                  BUPA_REL                  CRM
    300          CRM_FILTERING_ACTIVE                                 BUPA                                  CUSTOMER_MAIN       CRM
    300          CRM_FILTERING_ACTIVE                                 BUPA                                  CUSTOMER_REL         CRM
    300          CRM_FILTERING_ACTIVE                                 BUPA_HIERARCHY            BUPA_KNVH               CRM
    300          CRM_FILTERING_ACTIVE                                 CONDITIONS                                                           CRM
    300          CRM_FILTERING_ACTIVE                                 EQUIPMENT                        EQUIPMENT                  CRM
    300          CRM_FILTERING_ACTIVE                                 MATERIAL                         MATERIAL                    CRM
    300          CRM_FILTERING_ACTIVE                                 VEND                                 VENDOR_MAIN            CRM
    300          CRM_NO_BEFORE_IMAGES                             SALESDOCUMENT                                                 CRM
    300          CRM_RELEASE
    Please let me know, if I am missing anything. Do you think activating Scenario A is important? I think my versions suite that I need scenario A, If I am not wrong.
    Thanks,
    Sharath.

  • Error in Initial Load of Products from ECC to CRM

    Hi ,
        Im getting below errors In initial load of MATERIAL from ECC to CRM.
    <b>Data cannot be maintained for set type COMM_PR_MAT
    Data cannot be maintained for set type COMM_PR_UNIT
    Data cannot be maintained for set type COMM_PR_SHTEXT</b>
    <b>My Analysis is</b> 
      I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
      After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
    <b>Required Solution</b>
      Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
    Regards,
    Prasad
    Message was edited by:
            SAP CRM

    Hi there,
    Try to attach the Set Types:
    "COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
    to the Category "MAT_" and then run the Initial load again.
    It should work now unless you have some other issues.
    Best regards,
    Pankaj S.

  • Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

    Hi All,
    I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
    The following Errors/Warnings occured. Do you want to continue?
    Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
    DNL_CUST_PROD0: Object will not be loaded
    After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
    Please help me fixing the issue.
    Thanks in Advance.
    Cheers,
    Rj

    Hello RJ,
    Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
    R3AI_DNL_CUST_PROD*.
    Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
    Then try to re-load the object.
    I do not see any other reasons for the above error message.
    Best Regards,
    Shanthala Kudva.

  • Issues in employee replication from ECC to CRM through ALE/IDOC

    Hi,
    We are replicating the employees from ECC to CRM through ALE/IDOC.
    Some times for some employees, the Idoc status in CRM is  52(Application document not fully posted) in CRM (WE02 tcode)
    If I see the details its showing as " Identification Category BPCCOD is Not Assigned to Any Identification Type"
    What I need to do now to avoid this.
    Pl suggest
    Regards
    BABU.

    Hi Babu, I'm having the same error when I replicate my employes. I have define  BPCCOD in  spro - Cross-Application Components - SAP Business Partner - Business Partner - Basic Settings - Identification Numbers,  but this configuration does not resolve my problem.
    Could you resolve this problem?.
    Pls. let me know...
    Regards,
    George

  • Equipment Replication from ECC to CRM 6.0

    Hi Gurus,
    I am trying to Replicate equipments from ECC to CRM 6.0
    I did all the activities as specified still encountering issue while replicating.
    I did following activities
    1) Default settings
    OLTP-EQ-0401-0401-X(Delta)
    2) BADI - CRM_EQUI_LOAD_STDIMP    (Activated)
    3) Specify adapter object for uploading objects
    0401 - DNL_EQUIPMENT
    I tried to load Equipment through R3AS for "EQUIPMENT" OLTP selected.
    A) I checked SMQ1, SMQ2 - No Queues are blocked.
    B) SMW01---Found 2 lines for BDOC Type CRM_EQ_DMBDOC with green light successfully processed.
    C) But if I Check through R3AM1 (monitor Objects) the Adapter "EQUIPMENT" is aborted.
    I checked the BDOC Message for the passed lines in SMW01 it says
    1) Start of Initial load.
    2) No Objects were selected.
    In ECC, I see enough equipments in EQUI Table. But I haven't given any filters in EQUIPMENT so that it will select all.
    Please correct me if I am following a wrong process or forward me the check list for Equipment load.
    I tried almost a full day on this but nothing accomplished and I found similar failure postings for Equipments a lot in Forums.
    Please advice.
    Thanks,
    Sharath.

    Hi Sharath,
    I am getting the same problem as yours while trying to download EQUIPMENTs from ECC to CRM.
    I have done the following steps:
    1. Created a category for the object family 0401 and assigned the relevant set types to it.
    2 Maintained the settings for downloading equipments into CRM at:
    SPRO --> Master Data --> Installed Base --> Replication of technical objects from SAP ERP --> Define default settings for replication equipment.
    3. Activated BADI CRM_EQUI_LOAD
    On triggering the initial load am getting 2 F02 state CRM_EQ_DMBDOC bdocs w/o any classical / extension data in it.  When I check for the trace I get to see the message 'No objects selected' for the ECC system though there are equipments in the ECC equipment table EQUI.
    Would appreciate if you could share how did you solve your problem.
    Thanks in advance for the help!

  • Customer replication from ECC to CRM

    Hello everyone,
    I am having some difficulty replication a customer from ECC to CRM.
    In our environment, customers are generally created from CRM & then replicated to ECC.
    Now we are creating a new Distribution channel & hence want to extend all our existing customers to the new DC.
    Since I am a SD Consultant, I was thinking of extending the customers in ECC.
    I tried extending a customer which was originally created in CRM. When I extended it to the new DC in ECC, it dint come over to CRM.
    I cannot see any BDOC in SMW01 also.
    Also when I checked the Filter setting in R3AC1 for objects BUPA_MAIN & Customers .. there is nothing set in the filters for the source ECC.
    Do I have to check any additional objects which I need to check ?
    Or is it that no settings means nothing created in ECC would come over ?
    Can anyone guide me so as to understand why this is happening.
    Also if there are any filters which i need to check, can anyone tell me what tcode & what adapter objects do i need to check ?
    Thanks
    Vin
    Edited by: vinit parkar on Aug 3, 2010 10:58 PM

    Hi,
    If you are downloading Customers from ECC(XD01/XD02/XD03) then CRM uses the adapter object CUSTOMER_MAIN and not BUPA_MAIN. You can check if there are any filters in this object.
    Alternately you can check if the delta is active in ECC. I do not remember the transaction for checking this but you can find the same from the menu path.
    Cheers
    Binai

  • Problem in customer replication from ECC to CRM

    Hi experts,
    When I create a customer in ECC using Tcode XD01 a BDOC is created in CRM. But this Bdoc shows following errors:--
         Partner (): the following errors occurred
         Incorrect input data:
         Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN.
    When I see the Bdoc message body the data(central data etc )is all blank except the field Object = BUSINESSPARTNER.
    Why the Bdoc messae is not getting populated with correct value?
    Also how I can see the data which is being sent from ECC. Is there any Idoc or something  created at ECC outbound side where I can see the sent data?
    Where in XD01 bdoc message is being created?
    Please help.
    Regards,
    Vimal

    Hi Vimal,
    You'd need to debug the FM CRM_BUPA_MAIN_VAL to find out what was the cause of validation error. Once you get the missing details, check if those details are being populated correctly at ECC end.
    Thanks,
    Rohit

  • Business partner replication from ECC to CRM

    Hello community!
    I need help with business partner replication for financial services from ECC 6.0 to CRM 7.0 using standard intagration scenario BusinessPartnerReplication from XI Content SAP ABA 7.0. Scenario type is asynchronous ABAP Proxy to ABAP Proxy.
    I activated proxies on ECC and CRM side as described in blog: /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ECC, CRM, PI systems are registered in SLD.
    And also i created configuration scenario based on BusinessPartnerReplication scenario from XI Content SAP ABA 7.0 and all necessary configuration objects.
    The thing that i cann't find:
    What standard function modules from link below should i activate on ECC sender side and CRM receiver side in transaction CRMC_BUT_CALL_FU for my replication work?
    http://help.sap.com/saphelp_crm50/helpdata/en/96/3c8942ecd55551e10000000a1550b0/content.htm
    Thank you in advance, Dzmitry

    The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
    BR,
    Dzmitry

  • Bdoc Error: PRODUCT_SRV while download Customizing Objects from ECC to CRM

    Hello,
    we have tried to download Customizing Objects from ERP to CRM we getting Bdoc error PRODUCT_SRV
    Please any help us in replicating customizing objects ECC6.0 to CRM7.0 Ehp1.
    Bdoc Type:PRODUCT_SRV
    Thanks,
    adi

    Adi,
    Where do you get the erorr? If you're downloding PRODUCT_SRV, then this is not a customizing object. Please check for related inbound and outbound queues in CRM and ECC for errors. Please also check SMW01 and see if you have any BDoc's in error. Give us the full error text of any errors found.
    If you get the problem with customzing objects, please let us the object name(s). Is it just one object or all customizing object?
    Best regards,
    Brian.

  • Business Partner replication from ECC to CRM based on Company code

    Hi:
    I got this requirement where we need to transfer customers from ECC --> CRM. Customers specific to a company code.
    Trying to maintain Filters for  CUSTOMER_main--> KNB1- BUKRS to filter customers by a certain company code.  I get this error " Table not maintained in smoftables."
    Checked table " SMOFFILFLD" to see there are no entries for KNB1.
    While I could check with my superiors on restricting transfer of customers based on Sales area data, as KNVV and KNVP data is maintained.
    I would like to know if I can proceed with adding new table KNB1 to this table. If this is not recommended kindly suggest one.

    The list of standard FM you can find in sap note: Note 875420 - Business partner transfer to SAP GTS: Exchange Infrast. (XI).
    BR,
    Dzmitry

  • Replication of Material Changes from ECC to CRM

    Hi All,
    I had selected deregistration for R3A* queue from the queue list using tcode SMQR. From that time I am unable to see the material master replications from ECC to CRM.
    So, again I selected registration for R3A* queue from the SMQR. Even now I am unable see the replications.
    Please can any one help me.

    Hi
    Do you get any sysfail in the inboud queue (and / or a dump in st22)?
    Do you get any errored bodcs?
    If yes which error message ID and Number?
    Best regards
    Christophe

  • Replication Z-Tables from ECC to CRM

    We have a client with some Z-Tables in ECC and we need to replicate this tables in CRM,  anybody have any information about this.
    Thanks in advanced
    Sebas

    Hi Sebas,
    The following link shows the replication from CRM to ECC. The same can be followed for replication from ECC to CRM.
    Replication of Z table from CRM to R/3 - No mBDoc Created
    You can also try this
    1. Create the Ztables both in ECC and CRM
    2. create customizing adapter objects in R3AC3.
    3. copy the stanadard FM 'CRM_BUPA_MAP_ADREREG_CI' to custom FM and write source code. load object in R3AS.
    4. create a variant and shedule the based on requirement
    Thanks and regards,
    Madhukar Reddy

  • Error during Initial Upload from ECC to CRM

    Hi All,
          I am getting an error while initial upload of BPs from ECC to CRM.
    I have BP groupings defined in  ECC. I had set the filter settings for a particular BP group(e.g. ZSIR). BP upload to CRM was successful. But, when I changed the filter setting to another BP group(ZDAC) those BPs were not copied to CRM.
    what might be the problem ?
    If anyone has any documents on initial & delta upload kindly forward it to me at [email protected]
    Any suggestions would be of great help !!!!
    Regards,
    Ashish

    Hi geetha check for the whther all the bp Data is down loaded or any thing missing after down loading to crm if that is the case due to data inconsistenmcy this ttype of error will occur, so you have to synchronize the both bp data
    manually after delta down loading.synchronization
    Reward
    Venkat

  • Replicating Quotation overall status from ECC to CRM

    Hi,
    we're using quotation management replication scenario A in ECC6 and CRM 5.
    when the quotation is referenced to sales order in ECC, the overall status becomes "completed" in ECC. but somehow, the overall status of the quotation in CRM remains "not processed".
    is there anyway i can get the overall status in ECC replicated to CRM for Quotation Management?
    Regards
    JD

    Hi Susana,
    i got reply from SAP mentioning that this is standard behavior. unless i replicate the referencing sales order document from ECC to CRM, then the CRM quotation system status won't be set to completed whenever it is referenced to sales order in ECC. we do not have any business need to have the sales order in CRM, but that's the way it is.
    Regards,
    JD

Maybe you are looking for