Error in validation include

Hi
I created own validation, next deleted and created a new but in FB01 when validation is excecuting then
I get error in include GBTFUFID. I see that in this file is FORM VAL_TEST which don't exists yet in GGB0 but still exists in this include.
Edited by: Kosmo on Dec 16, 2008 10:22 AM
Edited by: Kosmo on Dec 16, 2008 10:22 AM

Problem is when I creating a new validation on GGB0 then in file GBTFUFID is creating also a new FORM (with name of this validation) but when I delete it in include GBTFUFID this form isn't delete.

Similar Messages

No Hard Drive Or Volume Icon In Powerbook G4 Firewire (aluminium) Disk Utilities: Reads Error: No Valid Packages (-9997)

Whilst performing a zero/erase install on my Powerbook G4 Firewire (aluminium) with an OSX Tiger install disk (Tiger was the OSX i had erased), I had to force quite the installer as it appeared to be stuck on the Chinese script install section. I crashed the Powerbook down using the power button method. Now, when i power up the computer, it stays on the grey screen and just beeps at me. If i insert the install disks (both OSX Tiger or the original Powerbook Panther ones) there is no volume found during the install process. In disk utilities no hard drive icon or volumes appear in the left hand list, just 2 headings regarding the OSX install disk. I have clicked 'Verify Disk Permissions' on these headings and receive this message in the action box: Error: No Valid Packages (-9997). All other options in disk utilities are not available to use (partitions section etc), as there is no hard drive recognized to perform anything on. I presume my erase install has wiped out my previous OSX Tiger without installing some essential on the Powerbook (receipts perhaps?). My Powerbook was working 100% before this install attempt. It's a very lightly used machine with no noises/whirrs coming from the hard drive that would suggest failure of some kind. Any advice would be much appreciated.

Many thanks for your advice old comm guy.
I have run the Hardware Test as supplied with the Powerbooks install disks and everything has passed. I presume i can put my mind at rest about it being a problem in any of those departments. I have been browsing for a couple of weeks now and think my problem could be a loss in receipts/permissions somewhere. I remember looking for a lost file awhile back using a hard drive search programme through Terminal. It filled my hard drive almost to the maximum with unwanted retrieved files, it took me hours to erase all this again (never found the document i was looking for either). Perhaps a receipt was erased/trashed at this time?. Sometime later (prob weeks) i performed a fresh OSX install to give me an uncluttered faster running machine (I do this once a year). I zero erased the hard drive (including free space) and it was during this install that i had to force quit. It seemed to be stuck loading the Chinese Script so i had no option. After this the problem as described above has been persistent. Is there a way to restore receipts/permissions through Terminal or something like that?. Or maybe a procedure that one has to do when installing a new hard drive?. A step by step guide from someone would be a real help as i am not really confident using these advanced procedures.

API8532: Internal Error: Language Validation can't create a unique type nam

When I tried to validate an expression for a field in EXPRESSION operator in OWB, I got the error message:
java.lang.Exception: ValidationError?
java.lang.Exception: API8532: Internal Error: Language Validation can't create a unique type name when attempting to deploy a validation package.
Can you please help me out in this matter?

Good morning guys,
Here's what I found at Metalink for the aforementioned patch:
====================================================
This patchset is obsolete in this platform and language. Please see the reason stated below. Please contact Oracle Support for replacement patch.
Reason for Obsolescence
This patch was originally hosted as Generic. It will be obsoleted and rehosted as 2 different patches Patch ID 3455473 is for Windows Patch ID 3455474 is for Solaris 32 bit
Patchsets known to include or supersede Patchset 3443542
No information available from the patch repository.
====================================================
Hence my remark about the no-availability for AIX.
Anyway, do I really need to patch to 9.2.0.4 if I'm at 9.2.0.2.8 and the API8532-error still occurs?
Thanks.
Cheers, Patrick
PS
Trying to follow the links to the new patches is to no avail, I get:
"Error
No search executed. Please provide a valid patch number.
Trying a generic search for my platform and my version is a tad difficult, as far as I know my OWB-install was not a part of a 9iAS or 9iDS suite, so which one to choose... ?

Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"

I have ETL with ~800 tables that I moving from Oracle to SQL Server (Prod Oracle -> Prod SQL)
Now the Oracle/SQL new version was came from vendor that I need to test, and for that I created new DEV environments for Oracle and SQL , the update includes updated new columns in exists tables and new tables . (DEV Oracle -> DEV SQL)
So what I tried to do is to take the old ETL(PROD) to change the connection to DEV servers.
Then I executing the packages from local laptop it's working, and if I trying to execute the packages from job schedule it's giving me errors : "Data flow task error failed validation and return validation status "VS_NEEDSNEWMETADATA"
I went to each table to check the columns if something different, and I was dropping some of the tables and recreated them in the destination but the error still shows. I also tried to change the package to "DelayValidation" to True but without
success.

I do not understand the difference between "... if I going to change the Connection Manager to new connection" and "didn't change the Connection Manager, only changed inside the Server name / user/ pass" 800 tables.
What I see is some tables your packages sees in Dev (laptop) is not of the same schema once the package is deployed hence the metadata error.
Arthur
MyBlog
Twitter

In F110 I getting error No valid Payment method found but i did

While doing intercompany clearance using Pay methd Y in F110 payment run in payment proposal system showing error "No valid payment method found" this is showing in vendor line item and if i am clicking customer line item showing debit bal still exit because system not picking my pay mthd Y in vendor line item which one i assigned in vendor master data. But for another vendor its posting clearing this error occur only for particular vendor. Any can help me to rectify my error.

Hello,
We were get the same error message and found that the solution was that the vendor must have an address.
In OBVU, Payment method / country, the required master record specs had Street checked on. This reqiured an address for the vendor. Once we entered an address the F110 payment run was successful for this vendor.
Rgds,
Dan

I*sqlplus: Internal error (no valid library could be found)

Hello
I have installed Oracle 8.1.7 on Windows NT
and Oracle 8.1.7 on Sun Sparc Solaris.
On Windows NT, I have installed i*sqlplus.
However, when connecting from browser
in the index file
I've given a valid username/password of
a database in Oracle 8.1.7 on Sun Sparc
and a connect string to the database
on Oracle 8.1.7 on Sun Sparc.
This connect string is created using
Net 8 assistant and this connect string
is on the Windows NT with Oracle 8.1.7.
However, instead of connecting I
am getting the error
Internal error : (no valid library could be found)
Can you please help me?
Thanks

Cyril,
Can you connect to the database using the command line version of SQL*Plus? If so, you're using the correct syntax.
It sounds like iSQL*Plus is not set up correctly. Do you have the necessary 8.1.7 components on the NT machine (Oracle HTTP Server, Net8, SQL*Plus)?
Review the installation documentation, and/or post more specific information on your set up.
Alison
iSQL*Plus Team

ISA B2B logon Error: No valid private connection for internet user

Hello ,
i used isauseradm to create a user zzweb with all authorizations for B2B..
now when i try to log to
http://host:port/b2b/b2b/init.do with the user zzweb
i have a runtime error with the logs :
EXCEPTION]
#1#com.sap.isa.businessobject.BORuntimeException: Error getting private connection for internet user:com.sap.isa.core.eai.BackendException: Error: No valid private connection for internet userzzweb
     at com.sap.isa.businessobject.BusinessObjectHelper.splitException(BusinessObjectHelper.java:78)
     at com.sap.isa.user.businessobject.UserBase.login(UserBase.java:313)
     at com.sap.isa.businessobject.User.login(User.java:143)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:295)
     at com.sap.isa.user.action.UserActions.performLogin(UserActions.java:368)
     at com.sap.isa.user.action.UserBaseAction.performLogin(UserBaseAction.java:126)
     at com.sap.isa.user.action.LoginBaseAction.ecomPerform(LoginBaseAction.java:77)
     at com.sap.isa.isacore.action.EComBaseAction.doPerform(EComBaseAction.java:353)
     at com.sap.isa.core.BaseAction.execute(BaseAction.java:211)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at com.sap.isa.core.RequestProcessor.processActionPerform(RequestProcessor.java:674)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at com.sap.isa.core.RequestProcessor.process(RequestProcessor.java:391)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
     at com.sap.isa.core.ActionServlet.process(ActionServlet.java:243)
     at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.tealeaf.capture.LiteFilter.doFilter(Unknown Source)
     at com.sap.isa.isacore.TealeafFilter.doFilter(TealeafFilter.java:61)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:373)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
what does this error means..?
i also realised that zzweb was not created in CRM backen? should it be created ?
many thnx for help ..
Message was edited by: Blackman

Its a late response... but if someone gets the same issue here is the solution.
When you register try uppercase password . That should take care of that issue.
The problem is with function module CRM_ISA_IUSER_SWITCH , Note 946536.
Although the note says 5.0 the problem exists with ISA 4.0 too

ISQL*Plus: Internal error (no valid library could be found)

I install iSQL*PLUS on middle tier (9i AS 1.0.2.1) according to documentation, when I trying to connect I am getting Internal error (no valid library could be found). The TNSNAMES.ORA file is correct.
Any suggestions will be highly appreciated.

My first suggestion is to use the HTTP listener on the RDBMS bundle. This is what iSQL*Plus 8.1.7 Beta was built for.
The HTTP servers on the iAS and Database releases require mods to be compiled differently.
- CJ

Disk Utility Error "no valid packages"

Hi,
I have a PowerBook G4 with 1GB RAM.
I've noticed a significant system slowdown lately. Programs take longer to open and respond, and it's rather annoying. I came to the forums to seek some remedy, and tried to run a Disk Utility to check that everything there is at least okay. But when I click on verify permissions, I get an error that says "no valid packages." Does anyone know what this means and how to fix it (if it needs fixing; I'm assuming this isn't a good thing, whatever it is!).
Thanks.
Lori

Hi librarygirl and Welcome to the Discussions!
Mac OS X 10.3, 10.4: Disk Utility shows a "No Valid Packages" alert
Disk Utility can't verify or repair permissions on the Mac OS X 10.3 or 10.4 volume if the "BaseSystem.pkg" file is not in /Library/Receipts.
This alert appears when you try to repair permissions with Disk Utility:
"First Aid failed
"Disk Utility stopped repairing permissions on '(volume name)' because the following error was encountered: No valid packages"
In the Disk Utility text window, this message appears in red text:
"Error: No valid packages (-9997)"
This happens when the BaseSystem.pkg file is not in /Library/Receipts.
Solution
If you've moved this file, move it back to /Library/Receipts. You shouldn't normally remove any files from /Library/Receipts.
If the file has been deleted, replace it by copying it from a different computer that uses Mac OS X 10.3 or 10.4, or by reinstalling Mac OS X 10.3/10.4 from an installation disc.
"Reinstall" means you can install 10.3 or 10.4 from a disc, if it's the same version of 10.3/10.4 (such as 10.3.3 on both the installation disc and computer). If the version of 10.3/10.4 on the computer is newer than what's on the install disc, then use the install disc to perform an Archive and Install installation instead, then update to a later version of Mac OS X.
Joe

CRVS2010 Beta - Error: No valid Report Source is available

I am new to using crystal reports in .NET so any (un-jargoned) help is much welcomed and appreciated.
I am implementing an web application on a Windows XP machine using VS2010 and have downloaded and installed the CR4VS2010 beta 2 and the CRforNET40_x86. All installed OK with no errors.
I have embedded a crystal report viewer into my web page and have populated a dataset (myDS) successfully from my SQL server connection earlier in the code.
The report (stoppages.rpt) is an untyped report stored in a separate folder and has 2 datetime parameters to pass in. When I run the web app it runs fine until the parameter boxes appear - I enter 2 valid date values into the parameter boxes when I hit OK I get an error - No valid report source is available.
My code is shown below - I have searched other forums and it was suggested to put in the session.add part but the error occurs with or without this bit in...
Please help - newbie and desparate! Thanks
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
            myReportDocument.Load("C:\Reports\stoppages.rpt")
            myReportDocument.SetDataSource(myDS)
            Session.Add("Report", myReportDocument)
            crvThisReport.ReportSource = myReportDocument
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 13, 2010 7:22 AM

Hi Ludek, I tried adding
<startup useLegacyV2RuntimeActivationPolicy="true">
<supportedRuntime version="v4.0"/>
</startup>
to the config file but it didnt resolve the problems.
However I think I have found a work-around solution to setting the parameters programmatically rather than use the crystal report viewer pop-up boxes. I am posting my code to help anyone else who might be experiencing the same problems:
Dim myReportDocument = New CrystalDecisions.CrystalReports.Engine.ReportDocument()
myReportDocument.Load(Server.MapPath(strRptPath))
myDS.WriteXml(Server.MapPath(strXMLPath), XmlWriteMode.WriteSchema)
myReportDocument.SetDataSource(myDS)
myReportDocument.Refresh()
myReportDocument.SetParameterValue("DateFrom", #9/1/2010 6:35:00 AM#)
myReportDocument.SetParameterValue("DateTo", #9/8/2010 6:35:00 PM#)
crvThisReport.ReportSource = myReportDocument
DateFrom and DateTo are the parameter names within my crystal report.
It seems to be working fine, it stops the crystal report viewer from displaying the parameter pop-up box which stops the error occurring. However, the error still occurs when you want to interact with the report in other ways, ie page navigation, group tree navigation. It still allows me to print, export and zoom in and out, so I will have to disable some buttons and features until this error is resolved - the search continues!
Thanks for all your help and advise.
Edited by: juliep68 on Oct 14, 2010 11:33 PM

PA-Hiring Error- No Valid Interval Found (Internal Number Assignment)

Hello,
Iam facing this issue at the time of hiring (IT0000). The internal number range (01) is maintained in transaction code PA04 from
00000001 to 90000000 and ext check box is NOT checked. In NUMKR , the return value of the feature is also 01 .
Now the weird thing is i get this so called error " No Valid Interval Found (Internal Number Assignment)" but if i ignore the error and hit enter / save , it lets me save IT0000 and moves on to the next infotype in infogroup.
has anyone faced this before? what could be the possible solution here? Any help would be greatly appreciated
thank you in advance
Reema

Hey Reema,
http://www.sapfans.com/forums/viewtopic.php?f=11&t=327031
NUMKR-Feature
I think these are similar threads and have the same problem as you. Hope Partha Murli picks this up or you might just mail him.
cheers
Ajay

Costing Run Error: No Valid Source of Supply

Hi Experts,
   I am new to Costing,
    While executing Costing Run for a matrial ABC in plant XXX with a Costing Run 111, I get an error No valid source of supply could be found
but when I run the Costing Run for Same material for sam plant with different Costing Run It gets executed properly.
I have read the thread related to it where it is giving reference to note 713111, 499699 and 422926 but there is no check for Source List in Material master.
Regards,
Rajdeep Rane.
Edited by: Rajdeep Rane on Jul 24, 2008 1:30 PM

Rajdeep
Use OKKN as Jigar says.
Select the costing variant that you are using and then click on "valuation variant"
Look at the tab for subcontract - this will show what the costing variant is useing to creat cost estimates with.
Your options for subcontracting are:
2 Effective Price from Quotation Without Fixed Costs
3 Net Quotation Price
4 Gross Quotation Price
5 Effective Price from Quotation
6 Effective Price from Purchase Order Without Fixed Costs
7 Net Purchase Order Price
8 Gross Purchase Order Price
9 Effective Price from Purchase Order
If your material has a Special Procuremnet key 30 - then one of these strategies has to be used.

Automatic payment error - no valid payment method found

I created an invoice which i try to clear in f110. the vendor has the appropriate payment methods specified too but still I get this error "No valid payment method found " for that document.
kindly assist, if anyone knows where can be the error.
this is only for one company code.
thanks

Hi,
Check the configuration of Automatic Payment Program. Check "Bank Determination" and verify whether the paymetn method is set up for the House Bank determined by Automatic Payment Program configuration.
If the payment method in invoice or vendor master does nto match with the payemnt method set up for the house bank, you may get this error.
Regards,
Chirag
Pls. award points if this is useful.

F110 error - No Valid Payment Method found - Account ID missing

Hello All,
I am trying to clear some Vendor invoices in F110 using a Payment method. We have entered the House Bank at the time of posting the Vendor Invoice (Invoice is posted through an BAPI) and I am able to see the House Bank in BSEG - HBKID.
Further for the Payment Method we are using only one House Bank and one Account ID - which has been configured correctly in FBZP - Bank Determination.
However when we are running F110 for clearing the invoices - we are getting an error no valid payment method found. I am able to see the Payment Method & the House Bank while editing the Proposal - only Parameter which is missing is Account ID - though we have maintained it in Bank Determination configurartion.
Any help will be appreciated a lot to fix this issue.
Thanks and regards,
Ankur

Dear,
Everything may be alright but payment method is assigned to Bank Account in Bank selection section FBZP. So, system will process payment from the bank account with assigned payment method. So, there is no Account ID system is not able to find the payment method. It is difficult to provide remedy. If house bank and account ID is not in the vendor master then update them.
Just try it out....all the best.
Regards,
Chintan Joshi.

Deployment Error : "No valid iviews"

Hi,
I am new to Visual Composer. I have created a sample model using the example given in help.sap.com, During deplyment i got the error "No Valid iviews".
Can anybody help me resolvng this error.
Thanks
Vinit

Hi Vinit,
have you consult the log file?
You should also enable the flex error messages:
<a href="https://wiki.sdn.sap.com/wiki/display/VC/EnablingFlexerrormessagesinVisualComposer">https://wiki.sdn.sap.com/wiki/display/VC/EnablingFlexerrormessagesinVisualComposer</a>
You can also have a look at http://<yourportalhost>:<yourport>/nwa/
That is the path to the NetWeaver Administrator. Click on Tab "Monitoring" and then navigate to "Track and Trace". There you can take a look at the log files. I suggest you set a filter corresponding to you user-id. This makes debugging of visual composer errors quite easy, as some errors that are not channeled back to the visual composer are logged there.
Best Regards,
Marcel

Error in validation include

Similar Messages

Maybe you are looking for