Error in versa add on Is_select Phase

Hi All,
In the phase Prep_extension/IS_SELECT i have three options for moving ahead with VIRSA add on.
1) upgrade to the latest version of VIRSA .
2) keep the same version
3) delete the package.
Here are the issue i have with each one of them
1) I am unable to find the patch in the Service market place .when i search for VIRSANH 530_731 i do not get any results.I searched for the same using some other clients Id and i got the software.But when i place it in the EPS/in folder and continue the upgrade pocess,It is not able to find it in the directory
2) For keeping the same version we need a vendor key which is not available for EHP 6 upgrade.
3) for deleting the package also it requires a package in EPS/in which is not available .I checked for it in the SMP it is unavailable.
The current VIRSA Version is VIRSA 400_700.
Kindly provide any pointers for solving this issue.
Regards,
Venkatesh Iyer

Hello
Upload the packages to the downloads directory and repeat the phase in SUM.
Regards
RB

Similar Messages

Error in IS_SELECT Phase ERP 6.0 Upgrade

Hello,
I am in process of upgrading SAP R/3 4.7X200 to ERP 6.0 SR3.
During IS_SELECT phase of PREPARE, I am facing following error.
Cannot set current directory to "
SAPTRANSHOST\sapmnt\trans\EPS"
Logon failure : unknow user name or bad password.
The upgrade was started as SAPADM user.
Host file contains the entry " IP Address Hostname SAPTRANSHOST"
DIR_TRANS =
dbsapsdv\sapmnt\trans
Please suggest how to resolve this error. Any help will be highly appreciated.
Thansk,
Kathy

Hello Kathy,
the problem is that the <sid>adm user does not have access rights to
dbsapsdv\sapmnt\trans.
Please check its permissions on this remote server and repeat the phase, it'll work without problems.
Best regards,
Tomas Black

ERROR in ADD-ON conflict phase while upgrading ECC 6.0 system

Hi all,
I am having ECC 6.0 system and am upgrading its SAP-APPL component to 603 patch level 03. I was having SAP-APPL 603 but at patch level 0, i checked for all dependencies and defined the queue in SPAM and it showed all green (OK) for SAP-APPL and so i started but i faced error in add-on coflict phase. It said CRT needed for ADD-ON FICAX release 603. I searched alot but i cant find it on market place. This conflict occured for SAP-APPL 603 patch level 01 it said either include CRT as mentioned above or remove SAP-APPL 60301. Please help me out.

The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60301.
The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60302.
The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60303.
Check the support packs of components FI-CAX on Service Market place, I think FI-CAX is dependant on SAPKH603301 and others so you can check the import condidtions of FI-CAX on service marketplace and update FI-CAX first then only you would be able to update patch of SAPKH60301
Regards
Subhash

Fatal error in JRockit during memory setup phase

using jrockit-R26.0.0-jdk1.5.0_04-ia32, when I fire up java I get:
asmith@asmith:~$ java -version
[JRockit] ERROR: Fatal error in JRockit during memory setup phase.
Try to reduce the heap size using -Xmx:<size>m, i.e. "-Xmx:16m".
Could not create the Java virtual machine.
using jrockit-25.2.0-jdk1.5.0_03-linux-ia32 I get:
asmith@asmith:~$ java -version
java version "1.5.0_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_03-b07)
BEA JRockit(R) (build dra-45238-20050523-2008-linux-ia32, R25.2.0-28)
I ran an strace, here is the end bit:
map2(0x7faf0000, 2011136, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7faf0000
gettimeofday({1141337354, 237404}, NULL) = 0
lstat64("/usr", {st_mode=S_IFDIR|0755, st_size=264, ...}) = 0
lstat64("/usr/local", {st_mode=S_IFDIR|0755, st_size=480, ...}) = 0
lstat64("/usr/local/java", {st_mode=S_IFDIR|0755, st_size=496, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32", {st_mode=S_IFDIR|0755, st_size=400, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre", {st_mode=S_IFDIR|0755, st_size=184, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib", {st_mode=S_IFDIR|0755, st_size=1760, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib/i386", {st_mode=S_IFDIR|0755, st_size=1216, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib/i386/jrockit", {st_mode=S_IFDIR|0755, st_size=144, ...}) = 0
lstat64("/usr/local/java/jrockit-R26.0.0-jdk1.5.0_04-ia32/jre/lib/i386/jrockit/libjvm.so", {st_mode=S_IFREG|0755, st_size=3033108, ...}) = 0
sysinfo({uptime=95920, loads=[33984, 36576, 38560] totalram=778179, freeram=32497, sharedram=0, bufferram=242423} totalswap=2281220, freeswap=2276833, procs=135}) = 0
uname({sys="Linux", node="asmith", ...}) = 0
open("/proc/self/maps", O_RDONLY) = 4
fstat64(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x77fd6000
read(4, "00000000-00002000 ---p 00000000 "..., 1024) = 1024
read(4, " /lib/tls/i686/cmov/libm-2."..., 1024) = 665
close(4) = 0
munmap(0x77fd6000, 4096) = 0
mmap2(0xc0000000, 65536, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x77bbf000
munmap(0x77bbf000, 65536) = 0
mmap2(0x7fd00000, 1073741824, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x37bcf000
mmap2(0x78000000, 16781312, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x78000000
mmap2(0x79200000, 16781312, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x79200000
mmap2(0x7a400000, 2097152, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7a400000
mmap2(0x7a700000, 2097152, PROT_NONE, MAP_PRIVATE|MAP_ANONYMOUS|MAP_NORESERVE, -1, 0) = 0x7a700000
mprotect(0x78000000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0x79200000, 4096, PROT_READ|PROT_WRITE) = 0
mprotect(0x7a400000, 2097152, PROT_READ|PROT_WRITE) = 0
mprotect(0x7a700000, 2097152, PROT_READ|PROT_WRITE) = 0
llseek(3, 0, [0], SEEKSET) = 0
read(3, "MemTotal: 3112716 kB\nMemFre"..., 1024) = 598
read(3, "", 1024) = 0
mprotect(0x7fd00000, 67108864, PROT_READ|PROT_WRITE) = -1 ENOMEM (Cannot allocate memory)
write(2, "[JRockit] ERROR: ", 18[JRockit] ERROR: ) = 18
write(2, "Fatal error in JRockit during me"..., 114Fatal error in JRockit during memory setup phase.
Try to reduce the heap size using -Xmx:<size>m, i.e. "-Xmx:16m".) = 114
write(2, "\n", 1
) = 1
write(2, "Could not create the Java virtua"..., 43Could not create the Java virtual machine.
) = 43
exit_group(1) = ?
linux kernel:
Linux asmith 2.6.15-16-k7 #1 SMP PREEMPT Mon Feb 20 18:14:55 UTC 2006 i686 GNU/Linux
This is an ubuntu linux custom kernel.
glibc version:
GNU C Library stable release version 2.3.6, by Roland McGrath et al.
Copyright (C) 2005 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.4.6 20060117 (prerelease) (Ubuntu 3.4.5-1ubuntu5).
Compiled on a Linux 2.6.11 system on 2006-02-04.
Available extensions:
GNU libio by Per Bothner
crypt add-on version 2.1 by Michael Glad and others
GNU Libidn by Simon Josefsson
linuxthreads-0.10 by Xavier Leroy
BIND-8.2.3-T5B
libthread_db work sponsored by Alpha Processor Inc
NIS(YP)/NIS+ NSS modules 0.19 by Thorsten Kukuk
Thread-local storage support included.
For bug reporting instructions, please see:
<http://www.gnu.org/software/libc/bugs.html>.
Let me know what other info you might need.
-Allen

This is a known issue and has been solved. The only release it appears in is R26.0.0. The next service pack will be release Q2 2006.
If you have a customer support contract BEA you can request a patched version including the fix for CR252095. The fix is included in R26.1.0 (Java 5.0 on Solaris) and will be included in the next Java 1.4 release (R26.2.0) of JRockit but I am afraid that this does not help you much. This particular bug was nnot present in earlier versions of JRockit.
A possible (probably tedious) workaround is to try and specify an upper limit of memory for objects through -Xmx (for example -Xmx64m) and with some luck the heap will be set up correctly.
/mattias - JRockit Memory Managment Group

Error while installing add on

Hi Experts,
error while installing add on
in add on installation wizard
setaddonfolder(c:\.....)returned 1
even i tried as run as administrator
also tried creating a new folder but same error is showing
Please help

Step 1:
Ensure that the Company Databases are upgraded to the same patch as
the SBO-COMMON.
Please see the SAP Note 979083.Also
check that the DB Version which is displayed in the 'Choose From'
window is the same for all databases. Please select the Refresh button
to ensure the information is up to date.
Step 2:
Ensure that the DI API is updated to the same patch as the databases.
Please do follow the steps described below to make sure the DI Version
is updated on the affected machine:
1. Disconnect from the DI (close all AddOns)
2. Deinstall the DI API via Add and Remove Programs
3. Open the temporary folder via
> Start > Run > enter %temp%
4. Locate the folder SM_OBS_DLL and delete this folder.
5. Install the DI API of the same Patch than the Software version of
the system. The Setup.exe is located in the folder:
...\Packages\DI API
6. Connect to the DI again.
See SAP Note 870207.
Step 3:
Recreate the SBO-COMMON.
0. Ensure that no user or addon is connected to any Business One
database.
1. Create a backup of the current SBO-COMMON.
2. Delete the SBO-COMMON from the Server.
3. Create a new SBO-COMMON by running the Upgrade.exe for the
Business One Installation Files under
...\Packages\Upgrader Common
Step 4:
Reinstall the ServerTools. The installation files can be found under
...\Packages\Server Tools
Step 5:
Test if there are any open connections which might prevent the new connection.
Please test to restart the server and connect to the database where you were getting the error first.
I think this might resolve ur issue.

Itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!

itunes 64 bit on windows 7 is unable to install, i have the 64 bit installer version but it keeps saying "errors occurred" at the ( rolling back ) phase. HELP!!!

I have the answer and this might be useful for any one else wondering about this in the future. If it helped you or explained what you wanted to know. Replay to the post pls
It's quite easy actually. First have your "iTunes Library Extras", "iTunes Library Genius", "iTunes Library", and "iTunes Music Library" backed up. Download ans install iTunes 64-bit. I don't know what's so 64-bit about iTunes 64 since Win7 reports it as a 32-bit application in the task manager. But anyway. Install iTunes 64 and launch it. If you migrated your library to another drive like me go to settings in iTunes and change the directory to your location. Close iTunes. Replace the newly created files with your backed up files. Launch iTunes. iTunes will load and then update your library and from there you are set to go! so basically it is just like a normal upgrade. But if you hesitated to go from 32 to 64 like me, here is your answer.
By the way. I'm using Windows 7 64-bit with iTunes 64-bit and it works without problems and syncing with my iPod Touch also works flawlessly.

"Error in function: Add Table not found [131-183]" - TDS Addon Version 3.16

While loading TDS Addon Version: 3.16 I am getting the undermentioned error:
"Error in function: Add Table not found [131-183]"
SAP B1, 2005B, PL 39.
It also shows the message that it is successfully installed. When I try to access any of the screen the above messge pops up.
This is very urgent kindly help me out.
Edited by: Philip Eller on May 16, 2008 8:50 AM
Edited by: Philip Eller on May 30, 2008 8:41 AM*

Dear,
The addon is a third party addon which was developed by CitiXSys. so the support is provided by the partner who developed the addon.
Go to the vendor Citixys for further support will give you a quick reply.
Regards
Apple

Exception:Error getting property 'add' from bean of type sample1.edit

Hi when i try to build and run the applicaiton it is displaying that build and run is successful. But when i try to access the jsp page through the url then it is showing error as below.
Exception Details:org.apache.jasper.JasperException
Error getting property 'add' from bean of type sample1.edit
Can anyone please help me out from this problem.
Thank you in Advance.

I solved the problem. The issue was everytime I was compiling only the JSP and the componenets couldn't recognize the bean methods.
Now I am running the project after any changes.
Thanks

New Service/DC creation error: Failed to add Pernr_D.dtsimpletype

Hi,
I am creating a new service in ESS. After importing the R/3 model into new application I am getting one error like below:
ADD (Failed: Internal Server Error). Failed to add Pernr_D.dtsimpletype .
Does anyone knows how to fix this error?
Thanks in advance.
Aditya

Hi,
I was able to solve the issue with the help of below content.
I used
psconfig -cmd upgrade -inplace v2v -passphrase <passphrase>
-wait
MSDN Forum
Technet Article
Thanks everybody
Arun D Gangadharan

ICloud Server Error: Can't add/edit contacts + it overwrites AddressBook edits

I originally posted this in the MobileMe forum. I am totally frustrated and disgusted with the unreliable and buggy iCloud. I am hoping smarter people than me can help resolve this. Thank you.
My primary data source is/was my MacBook Pro. It was all synced to MobileMe. (Contacts and iCal). iCloud came along. I "upgraded" to iCloud {the frustrating process of "your account needs to be upgraded, create an appleID..." was a whole different pain}.
To make life simple, I even allowed iCloud to be the source of data for my iMac as well as iPhone 4 and iPhone 4S by deleting everything and letting everything be populated from iCloud. Now, supposedly, all my contacts and calendar/reminder data is in iCloud and all the data on the iMac and iPhones if from iCloud.
Except, I cannot make edits to contacts in iCloud or even Add a new contact. When I Add or Save an edit in iCloud, EACH time I get an ERROR and the error report going to Apple is given below.
Worse, I spent an hour cleaning up the freshly downloaded contacts in the iMac's AddressBook. NONE of those changes went up to iCloud.
EVEN worse, iCloud overwrote the changed fields back to the old/blank fields, wasting my hour of work.
Adding cards in AddressBook on the computer also does not propagate to iCloud, though edits to or changes to iCal DO show up in iCloud. But, adds/deletes/edits to Contacts on iMac OR iPhones do NOT show up in iCloud.
Your help appreciated. Regards,
Imran
===
This is from the iMac console when I tried to delete a contact:
11/20/11 6:05:09.289 AM Address Book: Process com.apple.AddressBook deleting 1 contact
11/20/11 6:05:10.045 AM Address Book: [CardDAVPlugin-ERROR] -getHomeInfo:[_controller containersAtURLs:{(
https://MYNAME%[email protected]:443/########/carddavhome///MYNAME%[email protected]:443/########/carddavhome/
)}] Error Domain=CoreDAVErrorDomain Code=1 "The operation couldn’t be completed. (CoreDAVErrorDomain error 1.)"
The rest of the log is at: https://discussions.apple.com/thread/3508969 and not repeated here.

I added this comment to a thread about trying to get rid of iCloud once it has been used... it is much harder than you'd imagine... I am sharing it here because it includes steps I took after the problem we are discussing above....
====
I love Apple since it started and been a Mac user since it came out. Much that MobileMe was frustrating and had a lousy launch, I thought it was impossible to make something worse than MobileMe. Apple succeeded with this disaster, data destroying, heart burning, stomach churning and hours wasting beast called iCloud.
See iCloud Server Error: Can't add/edit contacts + it overwrites AddressBook edits By IMRAN Happy to have your thoughts on how to solve that nightmare. My last attempt (manually restorying my 5000 contacts in AddressBook, then painfully manually deleting contacts in iCloud {Select All > Delete there gives Server Errors also}. Finally managed. Then resyncing the MacBook Pro to iCloud led to 1000 contacts NOT syncing and no way except manually listing each address list side by side to figure out which ones it missed pulling in. Horror. Disaster. Shame.
For the user who says that turning off iCloud on the Mac and accepting its offer to delete data will delete data only on the cloud, sorry, but, unless I misunderstood you, that is dangerously wrong.
Like an evil spawn of SkyNet and a PC Boot Sector Virus, once iCloud has grabbed your data IT becomes the master of your data, your digital life. Deleting stuff means the stuff on your DEVICE (e.g. MacBook Pro, where you created and have all the ORIGINAL data in that iCloud sucked in) is what will be destroyed. Be careful.
If you're playing with this beast, not only make backups of your data in AddressBook and iCal, but invest in an external drive and clone your whole hard drive.
I am literally having to make a decision tonight, keep my MacBook Pro as the master, and sync via iTunes to the iPhone 4S and 4. I have an iMac mostly for music and video, which it was "cool" to have synced iCal and AB on, though not regularly used. But, after the hours wasted with iCloud, and the repeated data loss, I can live without the iMac being a synced device.
Hope this helps.
Regards
Imran Anwar

Error is encountered during import ABAP phase

Hi All,
When trying to install ECC6 on windows 2003 server the below error is encountered during import ABAP phase....Can any one help me in this regard.
CJS-30022 Program 'Migration Monitor' exists
ERROR 2009-07-08 08:39:33
CJS-30022 Program 'Migration Monitor' exits with error code 103.
For details see log file(s) import_monitor.java.log, import_monitor.log.
Thanks
Sandeep Singh DS

hi,
Below are the logs for import_monitor.log and import_monitor.java.log
import_monitor.log :
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is started.
TRACE: 2009-07-11 21:11:30 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL1' import package into database:
D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error
ERROR: 2009-07-11 21:12:38 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is interrupted with R3load error.
Process 'D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -stop_on_error' exited with return code 2.
For mode details see 'SAPAPPL1.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
ERROR: 2009-07-11 21:15:10 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'D:\usr\sap\EP2\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -stop_on_error' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2009-07-11 21:15:30
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2009-07-11 21:15:30
2 error(s) during processing of packages.
import_monitor.java.log
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 2, completed 16, failed 0, total 19.
Import Monitor jobs: running 2, waiting 1, completed 16, failed 0, total 19.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 16, failed 1, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 16, failed 2, total 19.
Thanks,
Sandeep
Edited by: Sandeep Singh DeviSingh on Jul 13, 2009 11:42 AM

I am trying to add a hard disk but keep getting an error message to add null disk

I am trying to add a hard disk but keep getting an error message to add null disk. How do I fix this problem?

When installing a new OSX, it is not unusual that some applications will not work. You have to check with the developer to see if they have upgraded to the new OSX or find a substitute application.
In regards to your new HDD, most of the time they come formatted for Windows, not Mac. Connect the HDD to your MBP and open Disk Utility>Erase. To make it compatible, select 'Mac OS Extended (Journaled)' as the format. Click on the Erase button. You then should be able to read and write to it.
Ciao.

Command execution failed: An error occurred when add "RTCUniversalConfigReplicator" to "RTC Local Config Replicator".

Hello.
I have a problem about Lync Server 2010 setup. While i am on Lync Server 2010 deployment wizard on first level of setup.
i got below error, i can't cont. to setup.
> Enable local replica service
Enable-CSReplica -Verbose -Confirm:$false -Report "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-[2011_08_15][11_51_51].html"
Creating new log file "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-b78e5ec9-0ab2-4397-a080-836e3001e88d.xml".
Enable replica service for the Lync Server computer.
Creating new log file "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-[2011_08_15][11_51_51].html".
Warning: Enable-CSReplica failed.
Warning: Detailed results can be found at "C:\Users\Administrator\AppData\Local\Temp\2\Enable-CSReplica-[2011_08_15][11_51_51].html".
Command execution failed: An error occurred when add "RTCUniversalConfigReplicator" to "RTC Local Config Replicator".

Hi, softwareman,
Please check whether you’ve added the admin account to CSAdministrator, RTCUniversalServerAdmins
and RTCUniversalGlobalReadOnlyGroup.
And there’s a
deployment guide for reference. Hope that helps.

JMF Registry Error - could not add item

Hi ,
I have JMF installed in my windows 7 , everything is work fine , my code work fine with JMF , but when I tried to change anything in JMFRegistery , pop up showing give me the error , could not add item -
I tried to make windows enviroments ( JMFHOME ) copy all jar files and dll into JER lib ext folder as well ,
Run the JMF Register az admin
Run JMFINIT
But non of these works and still I am not able to add plugin / any devices / codec to my JMFRegistaery
Anybody could let me know which part I am doing wrong ?

I am not sure but I had this issue when I wanted to generate a custom jar file. It turned out to be the jmf.properties file has to be with the jmf.jar
Can you check that ?

EHp4 installation - IS_SELECT phase error (MRSS_NW)

Hello everybody,
MRSS-NW (600) add-on shows status "undecided" in the phase IN_SELECT of EHP4 installation.
Is there any way I can skip/correct this phase? I tried to upgrade the add-on but I cannot find the installer in the SAP Portal swdc.
Any ideas? Thanks!
Jessica.

Hello everybody,
MRSS-NW (600) add-on shows status "undecided" in the phase IN_SELECT of EHP4 installation.
Is there any way I can skip/correct this phase? I tried to upgrade the add-on but I cannot find the installer in the SAP Portal swdc.
Any ideas? Thanks!
Jessica.

Error in versa add on Is_select Phase

Similar Messages

Maybe you are looking for