Error in version number increment for version 99

Hi sap gurus,
I am getting the below issue that my document version number is from 00 to 99. Now we reached to 99. after this when we are trying to create a document with version 100, it is not allowing. how to resolve this situation. what s the way forward. please guide me.
Regards,
Mastan.

Hi Mastan,
It is SAP standard. Use character with combination of number.
Like A0,A1......, B0,B1..... etc.
Surprised how you reached version 99 so fast in SAP.
Regards,
Krishnendu.

Similar Messages

Error occured in number assignment for object RESB

Hello all,
While creating the production order, I am getting error as "Error occured in number assignment for object RESB" ,
How to solve this error?
Regards,
Sagar

In SNRO for Object RESB, check the definition i.e. the intervals, number ranges assigned, the buffer setup. If you're not familiar with this, seek help from your basis personnel.

J1I5 - 'Error occured in number assignment for object J_1IRG1'

Dear Friends,
Please help me.I got the following error while clicking on Register entry button.
"Error occured in number assignment for object J_1IRG1".
How can I correct it.
Regards,
Rubin

maintain numer ranges for this object.
or check in SNUM.
Regards
Peram

RFC metadata import error - Couldnu0092t find the branch for version with id

Hi All,
When re-importing RFC meta-data, system returned following error message <i>Couldnt find the branch for version with id = <version id></i>
I am not able to delete the existing (already imported) RFC meta-data. However, I am able to import the same RFC into a different Software Component.
The error is described in SAP note 710998, unfortunately, this note only references XI 2.0
Is there anyway other than these-
1) Deleting a new SWCV and importing it and then import the RFC and make Release transfer from new SWCV to Old SWCV. If so, is there any impact on my QA systems and Productions systems during transport.
2) Deleting the existing SWC and Reimporting from SLD and trying to import the RFC again and redoing all the design
3) Exporting the current SWC and deleting it and importing the same file and then trying out the RFC import.
These options I just thought as an workaround solutions. Because i am not able to try these, as i don't have any test systems for this. Let me know any suggestions on these.
Thanks in advance,
Regards,
Moorthy

Yes, the used structures were imported from an old XI system. But I created the mapping new on the PI and put the used externel definitions manually to the mapping. That worked fine but now everytime when saving the mapping this error occurs. Btw both structures are used in other mappings, too, and they can be modified without any problems.
Which jdk version do you mean? Client or server?
Regards.
Oliver.

DMS Version Number Increment Control

Dear Gurus,
I have to set a type document with increment version alphanumber so the version has to begin with A , B,...
so I have to set in Customizing '* ' in Vers,No.
Somebody knows which is the user exit to change increment version number of the DIR?
Thanks in advance

Hi-
Assuming you are in ECC 6.0, You can find the BADI by going to SE18 and selecting the radio button "BADI name" and enter "DOCUMENT_NUMBER01" in the text box to right to see the definition.
The method is: DOCVERSION_CHECK
I hope it helps!
-J

Version number important for Firmware?

Hi
I've got a WRT54GL DE-AT v1.1 Router with Firmware Version v4.30.7. I'd like to upgrade to Firmware Version 4.30.9 due to problems with UPnP.
However the download site states explicitly that the update is for version 1.0.
Can I use the update without problems?
thank you in advance
p.s. Hmm, interesting...according to the Changelog there is no Version v4.30.7.Message Edited by CruelCow on 05-04-200709:30 AM

Don’t worry go ahead and upgrade the 4.30.9 firmware…

Installer DVD version number question for FCS 3

Hello All,
I just purchased a used FCS3. Upon inspection of the DVD, all of the DVDs say "Version 3.0, 2009", except for the DVD Studio Pro which says "Version 2.0, 2007"
Now I know apple didn't do much for DVD Studio Pro between FCS2 and FCS3. So I want to know if they at least updated their installer DVD in the FCS3, or did they just recycle the FCS2 installer DVD?
Can someone check their FCS3 installer DVDs and verify that the DVD Studio Pro installer also should say "Version 3.0, 2009"? I think the seller may have accidentally swapped the FCS2 installer in there by mistake, but I wanted to make sure before I start asking questions.
I own FCS2, and the DVD Studio Pro DVD is identical..
THanks

The DVD SP app is on the main disc - although there is a separate disc for the additional content such as templates etc.
You should see this in the installer dialog...
Main disk contents...

Batch Rename... how do I keep the version number [NOT the version name]?

Hi!
I've finally made up my mind about renaming my img. names in Aperture, and I would like to have something like "Travel San Francisco 2005 version x 1.CR2", where "version x" is the number which Aperture automatically adds whenever I make a change to an image. This is then followed by a number which automatically increases by one for every new image: 1, 2, 3, 4... etc. until there are no more images to choose from in the current project.
My problem is that I cannot figure out how to get Aperture to keep the, for me, very helpful "version 1, 2, ..." info attached to the images during renaming. In the Batch rename dialog box I am able to choose "Version Name" but that only gives me the current name of the selected image which I do not want. Aperture just replaces the "version x" in the image name.
Can anyone help me, or am I asking for something that cannot be done in Aperture?
Kind regards
Heine
DP 2GHz G5 Mac OS X (10.4.7) 3G Memory, BlueTooth, Aiport, 20" Cinema Display

HI, there:
I like answering these easy ones. Too often the questions regarding Aperture can't be solved as of yet becasue it's a bug or a lacking feature.
Anyway, when you import your files, look for the sidebar that has all the options on it. Look for a spot that says "Name Format." When you get there, there should be a drop down menu that will allow you to choose a variety of options. One of the options is "custom name with counter." Aperture will automatically assign each image a custom name and a numerical number starting with 1 and incrementing by 1 for a maximum of 999. You can change the options for this by selecting "edit" from the drop down menu.
Cheers

Have followed instructions for displaying Version number. Does not work. I believe "Firefox button" means the gold & blue globe? No "Help" button. Can find no reference anywhere to version number.

I believe that I have installed v.5 but can find no confirmation anywhere.... till now, when your "educated guess" shows v.5.0.1. Please give me concise instructions for displaying the version number. (For most software packages, "About" works... but not in this case.)
Thanks.

I can't think how '''cor-el''''s first advice went wrong. For Windows there is no difference between Fx5.0 and 5.01
Just to be really sure you can do -
*Firefox orange button>Help>Troubleshooting Information lists your Fx version, or
*Options>Advanced>Update>Show update history(little box at the bottom).

Version Number - Both numeric and alphanumeric

Hello
I need to have for a particular document both numeric and alphanumeric versions. I tried it will user exit * but while doing this the sequence of version is getting lost. The version is not proposed while creating new version
Kindly help in this regards
Gajesh

Gajesh
What is your exact requirement? Can you please give more details, it'll help forum to understand & the get back to your with solution.
If you are looking to have your version number like, A0, A1, A2 etc..
Then you need to do following configuration. Go to,
IMG>Cross-Application Components>Document Management>Control Data>Define Document Types , see the details (CTRLSHIFTF2) of your document type. In the next screen, in the Attributes tab, iin Vers. No. Incr. (Version Number Increment Control) field, enter 3 , then you'll have version numbers starting from A0......Z9 . Similarly, if you enter 6 you'll have version numbers startin from AA...AZ,A0...A9,BA..BZ,B0..Z9
I hope it helps you.
Best Regards
Amaresh Makal

Patch Set Updates and the version number

Oracle document 854428.1, Patch Set Updates (PSUs) for Oracle Products, has this to say about the version number:
2.3 Baseline Version for Easier Tracking
Oracle associates a version number to the patch. The fifth number of the database version is incremented for each PSU. For example, the initial PSU is version 11.1.0.7.1, the second PSU for Release 11.1.0.7 is 11.1.0.7.2, and so on.
My DBAs just told me that they applied PSU3 to our database, which had version number 11.2.0.2.0. I checked the version number after the PSU was applied, but it is still the same:
SQL> select version from v$instance;
VERSION
11.2.0.2.0
Do the PSUs change the fifth number in the version or not?

SQL> select comments from sys.registry$history where action_time > sysdate - 1
COMMENTS
PSU 11.2.0.2.3
Thankyou, that answers my question. The fifth number in the version column of the v$instance view does not seem to change when a PSU is applied. However, the sys.registry$history view has a record of the PSU with the correct fifth number in the version.

How do I make my iPhoto Library's version number appear in the Get Info window?

I recently (within the past 2 weeks) purchased a new 27 inch iMac and have been importing data (applications and files) from my 2010 Macbook Pro via AirDrop. One of the first files I migrated over was my iPhoto Library. I doing so, I noticed a few differences between its file attributes and those of the iPhoto Library file created by default on my new computer - two of which I'll note here. First, I noticed that the file resident on my new OS was labeled iPhoto Library.photolibrary while my older version did not have the ".photolibrary" extension. That seemed simple enough to correct so I added that extension to my old library file. The second difference I'd note - and the source of my question - is that the default iPhoto Library file displayed a version number (9.5.1) in its "Get Info" window, while mine did not. I checked my file's info.plist file and the correct information seems to be listed. It reads (in part):
<dict>
               <key>CFBundleGetInfoString</key>
               <string>iPhoto Libary 9.5.1</string>
               <key>CFBundleShortVersionString</key>
               <string>9.5.1</string>
</dict>
</plist>
I'm not sure this is really a question for the iPhoto community, as it seems like a more general issue; but, this is my first post to these forums, and I didn't know where to start. Thanks in advance for the advise/suggestions.

In terms of the info.plist file, I only reviewed it to see why I wasn't seeing the version number in the GetInfo window.
The string "<key>CFBundleGetInfoString</key>
               <string>iPhoto Libary 9.5.1</string>"
is exactly what will be shown in the Get Info panel. I tested that by simply editing this string in a test library using XCode. I could "Get Info" to show ridiculous versions numbers this way.
However, none of my older iPhoto libraries will show the version string in Get Info, only libraries I created with iPhoto 9.5.1. or Aperture 3.3 or later.
There is probably one of the other database files in the folder "database" - *.appdb and *.db interfering. None of the Library First Aid options did make the version number show for my older iPhoto libraries - not even rebuilding the iPhoto library. The only way I could make the version number show in "Get Info" was by exporting the library as a new library using Aperture. But this exported library is now showing as Aperture library.

Issues with RPD Version Number - Uploading OLD RPD

Hi Gurus,
I am facing a issue in OBIEE 11G from last few days.
Whenever I upload a RPD,the EM shows that it has incremented the veersion number of my RPD and it has been deployed. But after checking the asnwers we and opening the RPD in online mode we still find that a back dated(old) RPD has been uploaded.
Unless and untill we rename the RPD and upload it the changes are not reflected. Can you please help resolve this issue?
Thanks

Hi, I had this issue and was not able to resolve it. I had to do a re-install of OBIEE 1.1.1.7 . I'm curious to know if anyone has the same problem and was able to fix it another way, so I'm going to list my observations below:
EM did increment my repository.RPD to repository_002.rpd but repository_001.rpd was still active.
Mbeans showed that the "current" RPD was 002, but NQSConfig.ini showed that "Star = repository_001"
When clicking "Apply" under EM Deployment screen and restarting, the version number incremented, but NQSConfig.ini did not update
"Restart All" in EM appeared to be unusually fast.
When restarting OBIEE OMPN components in EM, the components always show ALIVE under opmnctl in the console window
oracle.as.managment.mbeans.opmn mbean was not available in the system mbean browser, which I believe means that the OPMN instance was some how unregistered
I re-registered the instance, which completely wiped the entire instance1 directory clean (I do not recommend doing this unless you back everything up outside the instance)
Re-registering the instance worked temporarily, but then broke again later that week

BO XI & CR product and service patch version number

hi,
anyone know
(1) how to find out the product & service patch version number matrix for BO XI and CR ?
e.g. I found from my BO XI that the version is 11.0.0.748, but don't know any service patch has applied.
can find a list like:
BO XI => 11.0.xxxx
BO XI R2 => 11.xxxx
BO XI R2 SP1 => 11.xxxx
CR XI => xxxx
etc.
(2) can a CR report created by CR version 11 be run in BO XI R2 ? what is the compatibility of BO XI and CR ?

Hi Eddie,
Adding more: how to get which all versions of BusinessObjects and Crystal Reports is installed on server or on client?
1. To get to know about the Service Packs for CR and BO:
- Go to Start > Control Panel > Add or Remove Programs > here you will get the list of Crystal Reports and Business Objects Product along with the Service packs and Fix Packs too.
However if BO has MHF or CHF then this information you will not get in Add or Remove programs.
2. about which MHF (Monthly Hot Fix) or CHF (Critical Hot Fix):
For BO:
Go to My Computers > Installation Directory: \ Program Files > BusinessObjects Enterprise 11.5 > Patch Folder (inside this folder you will get the details)
For Crystal Reports:
The information on what updates have been installed in Crystal Reports XI Release 1 can be found in C:\Program Files\Business Objects\Crystal Reports 11\Patches\History.txt.
Hope this helps you.
Regards,
Deepti Bajpai

Error: Number range for object RESB does not exist

Hi
I'm trying to convert a planned order (to purch requisition) partially via trxn code MD04. Upon saving I get the above error msg. The complete text of msg is as follows. I've maitained the number ranges of all the objects specified in this error msg. Can somebody explain on how to overcome this problem?
Many thanks
BE
Error Msg Text:
Number range for object RESB does not exist
     Message no. 61501
Diagnosis
     The system cannot create a document for an MRP element if no number
     range or interval has been maintained in Customizing of MRP or if t
     number range you have maintained is not allowed.
     Below is a list of MRP elements that are affected:
     Number range object MRP element
     PLAF                 planned order (operative oder simulative)
     EBAN                 purchase requisition
     RESB                 dependent requirements
     MDSM                 simulative dependent reqmts (long-term plannin
     MDTB                 MRP list
Procedure
     Check the number ranges in Customizing. If you do not have the necessa
     authorization, please get in touch with your systems administration.

Hi
Thanks for the reply. But I have maintained the number ranges for matl. reservations/dependant requirements at OMI2. Here is the screen shot..Do find anything wrong with it? Pl advice.
NR Object                             MRES/DREQ
No.                          From Number            To Number          Curr Number          Ext
01                           0000000001               8999999999           380                    blank
02                           9000000000               9500000000           blank                  checked
RB                          9500000001               9999999999           blank                  checked
Number ranges for the plants are assigned to 01 (0000000001 to 8999999999).
thanks
BE
Edited by: Brian Elfie on Jan 10, 2008 11:27 AM

Error in version number increment for version 99

Similar Messages

Maybe you are looking for