Error in VF02 while releasing Billing Document to Accounting

Hi,
I am  getting the below error while releasing the billing document to Accounting.Kindly help me in solving the below error.it would be a great help to me.
Error Message is-
System error in routine FI_TAX_GET_TAXJCD_LEVELS error code 2 function builder TAX2
Please do the need ful
Thanks
Supriya

Hi Supriya,
This is tax jurisdiction error. We assign tax juridiction at three levels
We give the tax jurisdiction at the time plant definition-Plant level
We maintain at VK11 t.code SD
Spro-FA-FA GL-Tax on sales or purchases-define tax jurisdiction-FI Level
May be you given the tax jurisdiction code at VK11 and you have to give that at FI level also
Regards
Surya

Similar Messages

  • Error while releasing billing documents to accounting

    i am facing the following problem while releasing billing documents to accounting i.e, taxcode in procedure TAXD is invalid...   pls solve it...

    Hi,
    That means the tax code which you are using is not linked to your tax procedure.
    For this Goto T.Code :FTXP
    Give Country for which this tax procedure is used.
    Next you have to give the Tax Code which you are using, if it is not created in that then it will create that tax code for that country, in that screen you will see all the tax condition types, give your tax percentage to the condition type which you want to use (Say MWST)
    Now release the billing document for accounting.
    You want face the issue.
    Hope this is clear.
    Reward if helpful.
    Thanks
    Praveen

  • While releasing billing document to accounting getting error message

    Hi Friends,
    I have created new condition type -YES7 and assigned to pricing procedure YDE10K ,I am releasing billing document to accounting but while releasing to accounting document I am getting error messages as "Assign condition type YES7 in CO-PA"
    if i double cilck this messages I am getting below descriptions.
    Assign condition type YES7 in CO-PA
    Message no. KE 391
    Diagnosis
    The system tried to transfer billing data to Profitability Analysis. However, an error was found in the assignment of condition types to CO-PA value fields. No entry has been made in the assignment table for condition type YES7.
    System Response
    The billing data cannot be posted to CO-PA if there is no entry as this would lead to differences between CO-PA and Financial Accounting. This is because this condition type posts to a G/L account (S400160).
    Procedure
    In CO-PA Customizing, make an assignment for condition type YES7 in operating concern EU01 under "Actual postings -> SD interface -> Assign value fields".
    so please let me know how to rectify this issue.
    Thanks in advance.
    Regards,
    Ramkrishna

    Before posting any question, please search the forum so that you would get solution straightaway.  Check these threads
    [Re: Assign condition type ZSMN in CO-PA|Assign condition type ZSMN in CO-PA]
    [Re: Billing not releasing to accounting|Billing not releasing to accounting]
    thanks
    G. Lakshmipathi

  • Cost Center Error while releasing Billing document to Accounting

    Hi SAP Gurus,
    Our user raised an issue that when he had released billing document to accounting, the system threw error message
    "Cost center xxxx (CO area)/xxxx(Cost center) does not exist on date 11/16/2011". Message No. KI 222.
    But the cost center xxxx does not exist in the system at all. The user does not want to create the cost center eirther. Cost center was not entered in Sales order, Delivery and Billing. I have checked 'Default account assignement' (OKB9) settings, Default account assignment in cost element master record and assignment of cost center to sales organization (OVF3). But cost center xxxx was not configured in the above settings. I have checked validations/substitutions, user exits and BAPIs, there is nothing specific to the cost center. This is not a cross-company code scenario. I have made field status to optional for cost center. But still the problem persists. Accounting document did not get generated because of the above mentioned error message. User applied SAP notes 315350. But it did not resolve the issue.
    Would anyone let me know 'why the system showed the cost center xxxx that does not exist, while releasing the billing document to accounting'?
    Thanks in advance.
    Best Regards,
    K.S.K

    Hi Friend,
    I think this link help for you
    Cost center XXXX does not exist on 15.09.2010.
    or check the OVF3

  • Error while release Billing document into Accounting -Help me

    Hi,
    While releasing SD billing document into Accounting,i am getting the blow error.Please advice me
    Valuation with material cost estimate: error with product "000AA696"
    Message no. KE350
    Diagnosis
    In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
    In order to determine the current plan period, the system needs to read the valuation segment of the material master.
    The system has found that the current plan period is not filled forproduct "000AA696" in plant "OB01".
    Display material (View: Costing)
    The system looked for the material cost estimate using costing key "YG3", as defined in the Customizing settings for CO-PA.
    System Response
    The document cannot be processed.
    Procedure
    Contact your system administrator.
    Thanks
    Sunitha

    Hi Sunitha,
    Please check your settings in KEPC. Check which costing key you have assigned to your plant.  Also check which rule you have set for the costing key. For example if  you have assigned "current standard cost estimate acc. to entry in mat. master" then check here is no current standard cost estimate for material.
    Regards,
    Abhisek

  • Error while releasing billing document to accounting

    Hi,
    I have an issue in the Sales order cycle.
    I have created a sales order and completed all stages till the creation of a billing document. However when i try to release this document to accounting, it creates an error,
    "Incorrect doc.no.: 520000007. Select document number between 0090000044 and 0090999999".
    Kindly note that 520000007 is the billing document number.
    Please advise.
    Thanks,
    Safi

    Hi,
    I presume your billing document number range is defined between 0090000044 and 0090999999. You can check it via FBN1 transaction. You should either assign the right number or change the number range for the document type in question.
    Regards,
    Eli

  • VF02 error in Release Billing document to Accounting document

    Hello SAP Folks,
    A sales order (VA01) and corresponding billing document has been posted (in VF01). When I try to release the billing document to Accounting, an error "Incorrect document no. XXXXXXXX.  Select the document number between yyyyyyyyy and zzzzzzzzzzzzzz " shows up. When I tried to find error through VFX3, it says, Release incomplete due to "FI/CO interface" Can anyone suggest the missing configuration.
    PS:  I checked the doc. type RV (Billing doc. transfer) and Billing type F2. They are in different number ranges. and RV is marked external. The number range settings are similar as that of another Company code (where we are able to release billing document to accounting document).
    Thanks in advance,
    Narayanan

    Hi,
    Thanks for your suggestions. The issue is resolved by changing the number range for RV document type (though it is still external). I guess this is made external since the Billing document number is passed to FI document number when it is released to Accounting documet.
    After the release, both Invoice and Accounting document have the same no.

  • Error:-Release Billing document to accounting

    Hi Guru's,
    While i am trying to Release Billing document to accounting   i am getting following Error"Insufficient authorization for sales document"
    What could be the issue ..Also in Billing document Header Posting Status is K Accounting document not created (No Authorization).
    Can anyone help PLEASE?
    Regards
    Vikrant M Kelkar

    Hi VIkrant
    As you were getting error so kindly check in VOFA of your billing document type .Check the accounting document feild and also check wheather any statistics has been changed
    Go to VA02 and check wheather order is blocked or not
    check wheather you have maintained Credit management for that customer or not .If you have maintained then check in FD32 wheather you have assigned any authorization or not
    Regards
    Srinath

  • Having problem to release billing document to accounting

    trying to release billing document to accounting but it is not permitting to release showing error " Reversal of document compay code xxxxxxxx document no xxxxxxxx 2010 v3 not possible in FI"
    Diagnosis
    Item & v4 in accounting document CC Document No Fiscal year
    was valuated with an open item foreign currency valuation.
    System Response
    Document cannot be reversed.

    Hi,
    Please check if on the original FI document, screen field BSEG-BDIFF is filled with a value.
    If yes, this is because a valuation of foreign currencies has run already (see program SAPF100 and Documentation please for further info). To successfully reverse your document, this valuation run needs to be reversed first.
    Please check note 545032  FAQ: SAPF100 Reversing "Balance Sheet Prep." Valuation Runs to assist you.
    Important: Only include the one document that you want to cancel in the reversal of SAPF100.
    See also note 339928 for your information.
    Best Regards,
    Vanessa.

  • Number range does not exist error message while releasing billing document

    Hi,
    We are trying to release a billing document to Accounting through VF02. But the system throws an error message that "For object RF_BELEG 1000, number range interval  does not exist FBN1".  Note : System does not specify which number range is missing...
    There are existing number range intervals for the company code which looks fine. Any advise where this number ranges are missing.
    Regards,
    Sakthy

    Hi,
    I suggest you to check the which document type has assigned for biiling document and against that document type , have to ssign the id for number range and check whethere internal assignment or external assignment.
    I hope this will make sense.
    Panneer

  • VF02 - Releasing billing document to accounting

    Hi SAP Gurus,
    Following error message is displayed while trying to release a billing document (Credit Memo) to accounting:
    "Tax statement item missing for tax code TB".
    I guess this should be in relation to pricing procedure.
    Could you please provide me some direction on how to clear this error to relaese a billing document to accounting.
    Forum point will be awarded for your inputs
    Many Thanks,
    Sreeni.

    Hi,
    Go to FTXP, select your tax code and check the percentage of the tax. If it is correct then ok.
    Now go to VK11, select your tax condition type, just maintain the tax code there and save it. Now go to VF02, and click on update select carry out new pricing and save the invoice.
    I think your problem should get solved.
    Reward points if solution helps.
    Regards,
    Allabaqsh G. Patil

  • Error Message KI 183 while posting billing document to Accounting

    Dear Sir,
    We are in the process of implementing COPA along with SD Module. In our
    business scenario, we raise Sale order to claim Transport service
    charges from the customer and need to assign delivery cost ( like
    Incentive pay to the driver and fuel charges). The Cost element defined
    for Incentive pay and the fuel charges are of category 1.
    Since we are using funds management to control the expenses, we cannot
    define the cost elements to be of category 12.
    We have assinged the condition types to the value fields properly. But
    when we release the Billing document to Accounting, we are getting the
    error message KI 183. I have read the long text of this message. The
    explanation does not suit our requirement due to the reason mentioned
    above.
    Can anybody tell me how to solve the issue
    Regards.,
    Rama

    Check the following notes:-
    =>  Note 590855 - VF02: Error message KI235
    =>  Note 629972 - VF01: Error message KI183
    =>  Note 177354 - Billing doc:Err message KI183, KI235 in Rel. 4.6A
    G. Lakshmipathi

  • Error while posting billing document to Accounting

    Hi,
    We are getting an error when posting Billing document to Accounting .Eror "The document type is relevant for VAT.Please inset a VAT code in postings.
    Thanks in advance.

    Dear Ravinder
    Go to VF02, input the billing document and execute.  Now from the top menubar, click on Goto <> Header <> Header.   There check what pricing procedure is flowing.
    Now go to V/08, select that pricing procedure and check whether you have maintained the condition type for VAT.  I believe you have not maintained and hence, the error. Include the VAT condition type and create a fresh sale order.
    Meanwhile, you have to reverse the billing document via VF11, reverse PGI via VL09 and delete the delivery document. 
    thanks
    G. Lakshmipathi

  • Releasing Billing document to Accounting

    Dear All,
    While releasing the Billing document for accounting I am getting the following error. "Only input tax is allowed for account 13110100 SF01, A1 is not allowed"
    What process is to be followed to solve this.
    Thanks in advance

    HI vikram
    Go to FS00 and give the G/L account and the company code and in the control data tab in the tax category field remove the tax indicator  .
    and save it
    Then go to VF02 and save it and then release it to accounting , it will be released to accounting
    Regards
    Srinath

  • Releasing Billing document to accounts

    Hi,
    From this new financial year starting from Apr-09 we have problem while releasing service billing document to accounts.
    When we try to release service bill using change billing document VF02 transaction and by clicking on green flag button in top tool bar the message appears as "Document 1116060027 saved  (no accounting document generated).
    Kindly help.
    With Best Regards,
    Rajkumar

    Hi Rajkumar
    "In the chart of accounts to be posted to, no accounts are defined for the tax code you used." this is your problem, please check with your FI guy to fix it.
    Or Goto Tcode VKOA and check whether for your Chart of account and your customer and material with account key MWS any account number has maintained or not?.
    If not maintain an appropriate account there.
    try and revert.

Maybe you are looking for