Error in view "IBO_WDC_INBOX.V_DEFAULT": Only one MessageArea UI Element is allowed to be visible

Dear Team,
In the control center, when i launch from SAP backend or select work overview button in the web UI it prompts for the error as below;
The following error occurred in system XYZ : Error in view "IBO_WDC_INBOX.V_DEFAULT": Only one MessageArea UI Element is allowed to be visible
Kindly suggest and advice.
All the ACF's are activated as mentioned.
Best Regards,
Shashikumar BS

What is your SAP version, including EHP and SP levels? See if SAP note 1818992 is relevant for your system and if it is make sure it is applied.

Similar Messages

Only one top level element is allowed in an XML document. Line 2, Position 2

I get this error when I try to run an xsql query with a where clause:
Only one top level element is allowed in an XML document. Line 2, Position 2
<font size='-1' face='monospace'>XSQL-005: XSQL page is not well-formed.</font><BR>
-^
Here is the xsql query I tried to use.
<?xml version="1.0"?>
<xsql:query connection="xmlbook" xmlns:xsql="urn:oracle-xsql">
select * from companytable where companynumber < 1000;
</xsql:query>
null

You need to escape certain characters in order to make XML documents well formed. The problem in this case is the less than sign between companynumber and 1000. You should replace it with <
I recommend reading a good XML book - "Building Oracle XML Applications" by Steve Muench, for instance.
Brian

Only one top level element is allowed in an XML document. Error message

Hi all, Am receiving above message when trying to view XML data generation. Have found little to no documentation on this particular message and thus far unable to research/guess my way to resolition. Any and all help will greatly appreciated. Thanks in advance for the help, harold

I had been using MC Internet Explorer until this . Have compared this one to functioning XML viewable with MS Internet explorer. Below is code I am using trying to resolve this problem.
<?xml version="1.0"?>
<?sap.transform simple?>
<tt:transform xmlns:tt="http://www.sap.com/transformation-templates">
<tt:root name="ecrtas"/>
<tt:template>
<tt:loop ref="ecrtas">
<ImportInstructions>
<ProjectSponsorInstruction>
<Instruction mode="Add">
   <SponsorName tt:value-ref="SPONME"/>
   <SponsorNumber>
     <IdValue name="Sponsor Number"><tt:value ref="SPONSOR"/></IdValue>
     </SponsorNumber>
    <SponsorType tt:value-ref="SPONTYP"/>
</Instruction>
</ProjectSponsorInstruction>
</ImportInstructions>
</tt:loop>
</tt:template>
</tt:transform>
Thank you again

Creating iphoto book and can't seem to view/ work on only one page at a time.

I am creating an iPhoto book and can't seem to view/work on only one page at a time. The Navigator, that allows you to focus on a part of the page is actually 1 1/2 pages in size so 1 1/2 pages are in view when trying to work on one page. What am I doing wrong or how can I fix this. It is very distracting viewing half of a previous page when trying to create a new page and write a story to go with the related pictures.

My Navigator seems to be to large. It covers 1 1/2 pages while in the training information it shows as the size of one page. Is there a way to adjust the size of the Navigator?
You can hover the mouse over the left border of the Navigator - then the cursor will turn into a resize cursor and you can drag the border and make the Navigator panel smaller by enlarging the source list.
Or drag the lower right corner of the iPhoto window and shrink the appliaction window. This will only make the navigator smaller - the source list and information panel will stay the same size.
Regards
Léonie

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

I keep getting Error code: ERR_TIMED_OUT when accessing only one website through googlechrome or safari

Www.Onereceipt.Com<http://Www.Onereceipt.Com>
Sent from my iPhone

IPhone Calendar List View Extends Back Only One Year

My iPhone calendar List view extends back approximately one year despite the fact that I have calendar entries extending back to 1999 and that older data is visible under the Day and Month views. This is a problem because the only search mechanism in iPhone calendar is through the List view. Therefore, any search I conduct extends back only to the data in the List view ... which means back only one year.
Does anyone have any thoughts or suggestions on how I could change this such that the List view extends to include ALL of my calendar entries and is in conformity with the Day and Month views? (I wanted to ask if anyone knows how to "correct" this, but perhaps Apple has designed it this way to speed-up the searching in List view ... I'm not certain.)
I am currently running the most recent iOS update, am syncing my iPhone calendar via MobileMe, have upgraded to the new version of the MobileMe calendar, and have ALREADY reset my sync. history, deleted my iPhone calendar and re-synced it, etc. These don't resolve the problem.

I've noticed that the date to which the List View will "look back" will change depending on software updates or syncs.
For instance, a few weeks ago my List View went back to December 2009 ... now it goes back to Jan. 2010 (i.e. I lost a month of "look back"). I do not specifically recall what triggered this change, but I reset my sync. log during this period.
If you make no changes to the sync. log or update the software, the List View start date will stay constant I believe. For instance, if the List View goes back to Jan. 1, 2010 right now it should stay that way until you reset the sync. log or update the iPhone software. Theoretically then the List View can "look back" much longer than 12 months assuming you make no changes to the sync. log or update the software. Of course, this doesn't address our issue here, but I thought I would point out that there seems to be a consistent pattern here and not some random bug screwing things up.
I'm still thinking that this is the way Apple intended it to work. In other words, that Apple felt it necessary to limit the calendar search feature to approximately 12 months worth of calendars. I hope I'm wrong.

Error Message on Windows Media Player 'ONE OR MORE ARGUEMENTS NOT ALLOWED'

THIS FEELS LIKE THE COMMERICAL ...
I'm trying to use Windows Media Player on my Mac Intel -- brand new.
I keep getting this error message -- no kidding!
"One or more arguements, not allowed"
Intel Mac Mini 1.66Mhz Mac OS X (10.4.9) 2gb RAM Installed

WMP for Mac has been discontinued and is not written for Intel Macs.
Instead you should use the free Flip4Mac QuickTime WM plugin available free from Flip4Mac.com
If you choose to stick with WMP, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups-beta.google.com/group/microsoft.public.mac.office> rather than an Apple forum.
Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you.

Change view options for only one window

Usually I prefer to view my windows as icons, but I like certain specific windows to show up in list mode. On 10.4, in the View Options, there was an option for "This window only" but that seems to be missing in 10.5. Am I just blind???

I agree. i enjoyed that feature in 10.4. It drives me nuts that if I want to change the view options for one folder because of the way I want to view its specific contents, the rest of folders on my system changes at the same time. I would appreciate it if each folder had a "memory" of its own view option settings.
However, I acknowledge that sometimes you would want to change a setting that affect all windows. But it shouldn't overwrite the remainder of the settings. If, for example, you wanted to change the text size of every icon in every window, but leave everything else as set in each individual folder, there should be an option for this!

One of 100 records in file has error. How to reprocess only one record??

Hi All
I have a scenario where, i receive data in a file, and we create invoices in SAP system from the data records in the file. My file contains 100 records and if there is an error in processing record number 43, how XI can be set up to restart when there are errors?
Re-start of file processing has to commence from the failed record. This should avoid the possibility of double posting of interface records.
Thanks
Chandra

Hi Chandra,
I am not sure,if this option is useful for you.
But we do this for Inventory Report(INVRPT) in our case because we have the same requirement.
We receive an EDIFACT file and a record can have errors.Then we don't want to reprocess full file again.
In order to avoid this,we create an IDoc for each line item.
If there is an error in one line item,this IDoc will fail and can be corrected and reprocessed later.
Kindly let me know if this is of any use to you.
Thanks.
Regards,
Shweta

Only one user at a time allowed to open MS Access database on a Mac share

I have an issue trying to open a Microsoft Access database from our Mac OS X Server running on XServe.
The MS Access file is stored on a Share Point on the XServe. Windows XP clients open the database. The problem is that it will only allow one user at a time to open the file. The has previously been operating fine when it was stored on a Windows server.
The Group's permissions for this Share Point allow Read & Write.
Any thoughts would be much appreciated.

I think you're being misled a bit by the interface: the checkbox labelled "Strict locking" doesn't just allow strict locking, it requires it (and thus disallows byte-range locking). That is, with strict locking enabled, any client that tries to lock any part of the file actually locks the entire file. Access normally depends on byte-range locking to allow different clients to share the database (as long as they aren't trying to modify the same part of it at the same time), but with strict locking the first client locks all others out.

I have to print two labels using single XML file.Error:Only one top level e

Hi,
I have to print two labels using single XML file. But its giving error:
[Error] Error -1072896683 - Line: 38 Pos: 2 Error: Only one top level element is allowed in an XML document.
Below is my XMl file:
<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE labels SYSTEM "label.dtd">
<labels FORMAT="lib://FRD/PurchasedDoor.btw" PRINTERNAME="IBM 6700-R80 (300 dpi)" _QUANTITY="1">
<label>
<variable name= "Color">AUTUMN</variable>
<variable name= "Special_Message_Attribute">MSG*</variable>
<variable name= "Special_Message">This is special Message Label</variable>
<variable name= "Model"></variable>
<variable name= "Build_Date">09-APR-12</variable>
<variable name= "Assy_Cart"></variable>
<variable name= "Assy_Slot"></variable>
<variable name= "Finish_Cart"></variable>
<variable name= "Finish_Slot"></variable>
<variable name= "Serial_Number">1945.1.1.2-1</variable>
<variable name= "Serial_Number_Barcode">1945.1.1.2-1</variable>
<variable name= "Specie">BIRCH</variable>
<variable name= "Truck_Group"></variable>
<variable name= "Label_Sequence_No">1</variable>
<variable name= "WIP_Cart"></variable>
<variable name= "WIP_Slot"></variable>
<variable name= "Cabinet_Sequence_No">110</variable>
<variable name= "JC"></variable>
<variable name= "Thickness"> </variable>
<variable name= "Width"> </variable>
<variable name= "Length"> </variable>
<variable name= "Overlay"></variable>
<variable name= "Options">B30</variable>
<variable name= "Profile_No"></variable>
<variable name= "Door_Style">NEWBERRY</variable>
<variable name= "Glaze"></variable>
<variable name= "Shape"></variable>
<variable name= "Glass"></variable>
<variable name= "Hinge_Side"></variable>
<variable name= "Hinge_Type"></variable>
<variable name= "EGE"></variable>
</label>
<labels FORMAT="lib://FRD/SpecialMessage.btw" PRINTERNAME="IBM 6700-R80 (300 dpi)" _QUANTITY="1">
<label>
<variable name= "Serial_Number">1945.1.1.2-1</variable>
<variable name= "Special_Message">This is special Message Label</variable>
<variable name= "Cabinet_Sequence_No">110</variable>
</label>
</labels>
Please suggest.

>
XML can only have one root element per file.
>
from XML Document: The Root Element

Unable to install SSL Certificate - ADMIN4118: Only one server certificate can be installed at a time

Hi,
We are trying to install SSL certificate (Verisign Class 3) on iPlanet Web Server (version 7). However, at the final step we are getting the error "ADMIN4118: Only one server certificate can be installed at a time"
We are following the below steps,
Under "Server Certificates" tab,
     -> Click on "Install" button.
     -> On "Select Configuration" click on "Next" button.
     -> On "Select Tokens and Passwords", select default token as "internal" and click on "Next" button.
     -> On "Enter Certificate Data", select option as "Certficate File" and give path to the certificate file which is having .p7b extension
     -> On "Certificate Details" we are getting warning as "Duplicate Server Details Found" and it's by default using the existing certificate's nickname.
     -> On "Review" page after clicking "Finish" button, an error is displayed saying "ADMIN4118: Only one certificate server can be installed at a time"
There are multiple sub-domains availble and the new certificate we want to install contains one more sub-domain.
So, say currently the subdomains present are,
1.abc.com
2.abc.com
so on...
and now we are trying to install a SSL certificate having one more subdomain say 10.abc.com.
Please let us know if you have solution to this problem.
Thanks,
Rajesh

Hi Rajesh,
That error is most commonly seen when you are trying to install a certificate chain into the Web Server.
The chain should be installed using the "Certificate Authorities" tab per the following steps:
1) Login to the Admin Console.
2) Click Edit Configuration from Common Tasks > Configuration Tasks.
3) Click the Certificates > Certificate Authorities tab from the Configurations page.
4) Click the Install... tab from the Certificate Authorities (CAs) page.
An Install CA Certificate Wizard opens. The wizard guides you through the settings available for installing a Certificate Chain. Select Certificate Chain when prompted for Certificate Type.
You should then see the CA and intermediate certificate(s) listed in the security database.
If you have access to MOS, more details can be found in the MOS KM Note:
   Oracle iPlanet Web Server - 'ADMIN4118: Only one server certificate can be installed at a time' When Installing Certificate Chain (Doc ID 1925025.1)
regards
Tracey

Web garden - first time the page loads only one chart appears

I have a page with 2 charts in a web garden(it's a sharepoint application). The charts are created programmatically in the Page Load ethod of a custom webpart. Originally we had issues with charts appearing and disappearing but I have changed
the config setting to the following and both charts appear most of the time:
<add key="ChartImageHandler" value="storage=file;timeout=20;dir=C:\inetpub\wwwroot\wss\VirtualDirectories\Myweb\uploadertemp\;" />
The problem I'm having is that the first time a user views the page only one of the charts appears. If i navigate away and return to the page both charts appear. Is there and issue with my config settings that is causing this behaviour?
Thanks
Karen

The answer to this (after months of toying with settings and permissions) is not to user the chart control in a web garden. I have seen the same issue multiple times on-line, with no concrete solution offered .
My workaround is to save the chart to a memory stream and write it to the page as an image, not as a chart control:
Chart chart = new Chart();
//Add data and chart settings here........
using (var chartStream = new MemoryStream())
chart.SaveImage(chartStream, ChartImageFormat.Png);
System.Web.UI.WebControls.Image chartImage =
new System.Web.UI.WebControls.Image();
chartImage.ImageUrl =
"data:image/png;base64," + Convert.ToBase64String(chartImage.GetBuffer());
chartParentControl.Controls.Add(chartImage);

Message KI249 assign only one true cost account object

Hi SAP gurus,
I am trying to create a sales order by assigning an internal order for which revenue posting (cost element category 11) is allowed (revenue posting box checked). But system only is picking up profit center assigned to internal order and not treating internal order as real account assignment. If I enter internal order system gives me an error "message no KI249 enter only one true account assignment"
I was able to post FB50 with the same revenue cost element to the same internal order.
Can you please help me with this.
James.

Hi,
Actually after some more research we determined that if we enter plant to the revenue items which are entered in the contract we are not able to enter order to which revenue should be booked. But we if remove plant we can enter the order and revenue is booked to real internal order.
But we need to enter plant becuase tax cannot be calculated if don't enter plant.
so what is the relationship between plant and internal order in this case? Why am I not able to enter order if I enter plant. system .
gives an error "enter only one true account assignment" I don't get this error if I don't enter plant.
Thanks,
Ravi.

How do I display AS3 Object in only one state?

I created a AS3 object from a SWFLoader class as an animation, which I then place in a Flex stage. I need to display the object programmatically in only one state but there is no "includeIn()" method to include it in just one state.
Right now, it is showing up on all of the flex states. I add this object at different times and positions in the state. Everything is fine except it displays in all the states.
How do I display a AS3 object in only one state?
Thank you.

When i use visible property as you suggested, it works, but only on one object. I am generating more than one of these objects, so there could be 3 or 4, etc of these objects displaying concurrently at different x y positions in the state.
Is there a way to grab all of the objects created by this AS3 class at once and apply the visible property?
thanx

Error in view "IBO_WDC_INBOX.V_DEFAULT": Only one MessageArea UI Element is allowed to be visible

Similar Messages

Maybe you are looking for