Error in voice router

voice router 3745
flash:c3745-ipvoice-mz.124-1.1.bin
i am getting the error and router restarted automatically
Apr 15 02:52:22: %DSPRM-5-SETCODEC: Configured codec 8 is not supported with this dsp image
kindly help to sort out this issue

Hi,
can you upgrade to latest 12.4 and try again ?

Similar Messages

TFTP error on 3925 intergrated voice router

We have a 3925 intergrated voice router that prompts this error cmapp_sccp_tftp_download_file: Unable to get configuration file size tftp://x.x.x.x/SKIGxxxxxx.cnf.xml, rc=-2
It gives the IP to our call manager then a mac address of analog gatway and extension pertaining to cnf.xml. The error runs when the router is connected to the network and also when it is not connected to the network. I have looked in the Cisco bug toolkit did not find a bug that was related to the issue. I check the tftp in the call manager there is no file of that type which there should not be. We have 3925s voice routers already registered to the call manager. Voice router information below:
Cisco IOS Software, C3900e Software (C3900e-UNIVERSALK9-M), Version 15.2(4)M2, RELEASE SOFTWARE (fc2)
System image file is "flash:c3900e-universalk9-mz.SPA.152-4.M2.bin"
Cisco CISCO3925-CHASSIS (revision 1.0) with C3900-SPE200/K9 with 1797120K/300032K bytes of memory

No, we are not using as CME.
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2015.03.26 11:13:02 =~=~=~=~=~=~=~=~=~=~=~=
XXXXXXXX#
XXXXXX#term len 0
XXXXXXXX#sh run
Building configuration...
Current configuration : 14446 bytes
! Last configuration change
! NVRAM
! NVRAM
version 15.2
no service pad
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
service password-encryption
service sequence-numbers
hostname XXXXXXX
boot-start-marker
boot system flash:c3900e-universalk9-mz.SPA.152-4.M2.bin
boot-end-marker
card type t1 0 0
logging buffered 16384
enable secret 4 DJsu7i99xp.Xzvkf3epKdaTCS5CUguxaCh2jhXROMZ.
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ none
aaa accounting exec default start-stop group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa accounting connection default start-stop group tacacs+
aaa accounting system default start-stop group tacacs+
aaa session-id common
clock timezone CST -6 0
clock summer-time CDT recurring
network-clock-participate wic 0
network-clock-select 1 T1 0/0/0
ip cef
no ip domain lookup
ip domain name textron.com
no ipv6 cef
multilink bundle-name authenticated
isdn switch-type primary-dms100
voice-card 0
dspfarm
dsp services dspfarm
voice rtp send-recv
voice service pots
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g729r8
codec preference 3 g729br8
voice translation-rule 1
rule 1 /3451/ /918005336093/
voice translation-rule 2
rule 1 /^$4...$$/ /XXXXXX\1/
rule 2 /^$6...$$/ /XXXXXX\1/
voice translation-profile 5-digit-dial
translate called 1
voice translation-profile pstn-in
translate called 2
application
global
service alternate default
license udi pid
hw-module pvdm 0/0
hw-module pvdm 0/1
hw-module pvdm 0/2
vtp domain BHAMA
vtp mode transparent
redundancy
controller T1 0/0/0
cablelength long 0db
pri-group timeslots 1-24 service mgcp
description
controller T1 0/0/1
cablelength long 0db
pri-group timeslots 1-24 service mgcp
description
csdb tcp synwait-time 30
csdb tcp idle-time 3600
csdb tcp finwait-time 5
csdb tcp reassembly max-memory 1024
csdb tcp reassembly max-queue-length 16
csdb udp idle-time 30
csdb icmp idle-time 10
csdb session max-session 65535
interface Loopback0
ip address
interface Loopback11
description
ip address
interface GigabitEthernet0/0
description
ip address
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/1
description
ip address 1
duplex auto
speed auto
media-type rj45
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/3
no ip address
shutdown
duplex auto
speed auto
interface Serial0/0/0:23
description
no ip address
encapsulation hdlc
isdn switch-type primary-dms100
isdn incoming-voice voice
isdn map address .* plan isdn type national
no cdp enable
interface Serial0/0/1:23
description
no ip address
encapsulation hdlc
isdn switch-type primary-dms100
isdn incoming-voice voice
isdn map address .* plan isdn type national
no cdp enable
router eigrp 1
network 10.0.0.0
redistribute connected
passive-interface default
no passive-interface GigabitEthernet0/0
no passive-interface GigabitEthernet0/1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip tacacs source-interface Loopback11
logging trap notifications
logging facility local1
logging source-interface Loopback11
logging host
logging host
logging host
logging host
logging host
access-list 18 permit
access-list 18 permit
access-list 18 permit
access-list 18 permit
access-list 86 permit
access-list 86 permit
access-list 86 permit
access-list 86 permit
access-list 89 permit
access-list 89 permit
access-list 89 permit
nls resp-timeout 1
cpd cr-id 1
snmp-server community
snmp-server community
snmp-server ifindex persist
snmp-server trap-source Loopback11
snmp-server locatiON
snmp-server contact
snmp-server system-shutdown
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps ds1
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps eigrp
snmp-server enable traps gatekeeper
snmp-server enable traps xgcp
snmp-server enable traps license
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps flash insertion removal
snmp-server enable traps auth-framework sec-violation
snmp-server enable traps ds3
snmp-server enable traps entity-sensor threshold
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps isdn chan-not-avail
snmp-server enable traps isdn ietf
snmp-server enable traps adslline
snmp-server enable traps vdsl2line
snmp-server enable traps c3g
snmp-server enable traps icsudsu
snmp-server enable traps envmon
snmp-server enable traps ds0-busyout
snmp-server enable traps ds1-loopback
snmp-server enable traps energywise
snmp-server enable traps vstack
snmp-server enable traps mac-notification
snmp-server enable traps aaa_server
snmp-server enable traps atm subif
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps memory bufferpeak
snmp-server enable traps cnpd
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps entity
snmp-server enable traps fru-ctrl
snmp-server enable traps resource-policy
snmp-server enable traps event-manager
snmp-server enable traps frame-relay multilink bundle-mismatch
snmp-server enable traps frame-relay
snmp-server enable traps frame-relay subif
snmp-server enable traps hsrp
snmp-server enable traps ipmulticast
snmp-server enable traps msdp
snmp-server enable traps mvpn
snmp-server enable traps nhrp nhs
snmp-server enable traps nhrp nhc
snmp-server enable traps nhrp nhp
snmp-server enable traps nhrp quota-exceeded
snmp-server enable traps pim neighbor-change rp-mapping-change invalid-pim-message
snmp-server enable traps pppoe
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps syslog
snmp-server enable traps l2tun session
snmp-server enable traps l2tun pseudowire status
snmp-server enable traps vtp
snmp-server enable traps bstun
snmp-server enable traps dlsw
snmp-server enable traps ipsla
snmp-server enable traps stun
snmp-server enable traps bfd
snmp-server enable traps bulkstat collection transfer
snmp-server enable traps mpls traffic-eng
snmp-server enable traps mpls fast-reroute protected
snmp-server enable traps mpls rfc ldp
snmp-server enable traps mpls ldp
snmp-server enable traps pw vc
snmp-server enable traps ipmobile
snmp-server enable traps snasw alert isr topology cp-cp port link dlus
snmp-server enable traps dial
snmp-server enable traps dsp card-status
snmp-server enable traps dsp oper-state
snmp-server enable traps dsp video-usage
snmp-server enable traps dsp video-out-of-resource
snmp-server enable traps ethernet cfm alarm
snmp-server enable traps rf
snmp-server enable traps vrfmib vrf-up vrf-down vnet-trunk-up vnet-trunk-down
snmp-server enable traps mpls vpn
snmp-server enable traps ccme
snmp-server enable traps srst
snmp-server enable traps voice
snmp-server enable traps dnis
snmp-server host
snmp-server host
snmp-server host
tacacs-server host
tacacs-server host
tacacs-server host
tacacs-server host
tacacs-server key
control-plane
voice-port 0/0/0:23
voice-port 0/0/1:23
ccm-manager fallback-mgcp
ccm-manager redundant-host 10.244.200.33 10.227.210.33
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager music-on-hold bind Loopback11
ccm-manager config server X.X.X.X. X.X.X.X X.X.X.X
ccm-manager config
ccm-manager sccp local Loopback11
mgcp
mgcp call-agent X.X.X.X. 2427 service-type mgcp version 0.1
mgcp dtmf-relay voip codec all mode out-of-band
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability mf-package
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
mgcp default-package line-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp fax t38 nsf 000000
mgcp rtp payload-type g726r16 static
mgcp bind control source-interface Loopback11
mgcp bind media source-interface Loopback11
mgcp profile default
sccp local Loopback11
sccp ccm X.X.X.X identifier 1 priority 1 version 7.0
sccp ccm X.X.X.X identifier 2 priority 2 version 7.0
sccp ccm X.X.X.X identifier 3 priority 3 version 7.0
sccp ip precedence 3
sccp ccm group 1
bind interface Loopback11
associate ccm 1 priority 1
associate ccm 2 priority 2
associate ccm 3 priority 3
associate profile 2 register Amarillo_XCODE
associate profile 3 register Amarillo_MTP
associate profile 1 register Amarillo_CNFB
switchback method graceful
switchback interval 8
dspfarm profile 1 transcode
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 20
associate application SCCP
dspfarm profile 2 conference
codec g729br8
codec g729r8
codec g729abr8
codec g729ar8
codec g711alaw
codec g711ulaw
maximum sessions 8
associate application SCCP
dspfarm profile 3 mtp
codec g711ulaw
codec pass-through
maximum sessions hardware 42
maximum sessions software 200
associate application SCCP
dial-peer voice 1 pots
translation-profile incoming pstn-in
incoming called-number .
direct-inward-dial
dial-peer voice 10 pots
destination-pattern 9[2-9]11
port 0/0/0:23
forward-digits 3
dial-peer voice 11 pots
preference 1
destination-pattern 9[2-9]11
port 0/0/1:23
forward-digits 3
dial-peer voice 12 pots
destination-pattern 911
port 0/0/0:23
forward-digits 3
dial-peer voice 13 pots
preference 1
destination-pattern 911
port 0/0/1:23
forward-digits 3
dial-peer voice 20 pots
destination-pattern 9[2-9].........
port 0/0/0:23
forward-digits 10
dial-peer voice 21 pots
preference 1
destination-pattern 9[2-9].........
port 0/0/1:23
forward-digits 10
dial-peer voice 30 pots
destination-pattern 91[2-9]..[2-9]......
port 0/0/0:23
forward-digits 11
dial-peer voice 31 pots
preference 1
destination-pattern 91[2-9]..[2-9]......
port 0/0/1:23
forward-digits 11
dial-peer voice 40 pots
destination-pattern 9011T
port 0/0/0:23
prefix 011
dial-peer voice 41 pots
preference 1
destination-pattern 9011T
port 0/0/1:23
prefix 011
dial-peer voice 50 pots
incoming called-number .
direct-inward-dial
gatekeeper
shutdown
call-manager-fallback
secondary-dialtone 9
max-conferences 8 gain -6
transfer-system full-consult
ip source-address X.X.X.X port 2000
max-ephones 700
max-dn 1400 octo-line
system message primary Operating in SRST mode
system message secondary In SRST mode
transfer-pattern .T
voicemail XXXXXXXXXXXX
translation-profile incoming 5-digit-dial
call-forward pattern .T
call-forward busy XXXXXXX
call-forward noan XXXXXXXX timeout 10
time-zone 8
banner exec ^C
^C
banner login ^C
******************* WARNING NOTICE *******************
^C
line con 0
exec-timeout 15 0
password
line aux 0
exec-timeout 15 0
password
line vty 0 4
exec-timeout 60 0
password
transport input all
line vty 5 924
exec-timeout 60 0
password
transport input all
scheduler allocate 20000 1000
ntp access-group
ntp server
ntp server
ntp server
ntp server

Voice Routing: Normalization Rule vs. Route

We're just testing some Enterprise Voice stuff within our Lync Environment but there's still one Thing not clear to me: On the specific user tab, we're able to assign a "Dial plan policy" and a "Voice policy"
In the Dial plan policy we're able to enter the normalization rules for Digit Manipulation.
In the Voice policy we can assign routes the call will take (e.g trunk).
But for example if there is a normalization rule which translates +402221111 to 1111 and on the route there are just numbers allowed starting with 1, why the call will fail? In my opinion the number should be translated to 1111 right after dialing and
this should match the proper route.
Can someone describe how the callflow is working in Detail. Will it maybe check for the specific route before there is any Digit Manipulation process?
Thanks in advance

Typically you'd do it the other way around, you'd translate 1111 to +402221111 so that it's in proper E.164 format, and you'd have your routes match that.
What you described should work though, at a very high non-mechanical level:
A number is typed into Lync
The number is normalized by the users dial plan (typically to a standard such as E.165)
The normalized number is compared against the voice policy, which will match if it finds a route that matches that's tied to the policy through a PSTN usage.
An INVITE is sent through the trunk using the path determined.
What kind of errors are you getting and do you get a "pass" in the Lync Control Panel -> Voice Routing -> Test Voice Routing when you enter the information? If not, you've got a typo or misconfiguration somewhere and giving more detail
will help.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Error in back routing Error in communication channel

Hi Friends,
I am sending the Idoc from ECC250 to ECC150 using XI, whenever I am sending the Idoc, I got this error Error in back routing Error in communication channel in SXMB_MONI.
In IDX2 also I got this error I:000.
Please suggest me how to resolve this issue.
Regards,
Shalini Shah

Did you cross checked all the configurations are in Place.?
I understand that the idoc has been received from ECC250 ,Are able to see the payload (i.e idoc )
in SXMB_MONI ?
IS configuration steps like
Receiver determination,
Interface determination
are correct?
Rajesh

Error on ICM router

Dear All,
We are running icm 7.2.4. from last couple of days we have started getting these errors on our router process. following are the errors that we are getting
11:30:24 rb-rtr Translation route timeout for controller ABC_VRUPG8 (ID 5007), route TR1_IVRCallBack.24 (ID 5158).
11:30:29 rb-rtr Translation route timeout for controller ABC_VRUPG8 (ID 5007), route TR1_IVRCallBack.45 (ID 5179).
11:33:00 rb-rtr Unknown Admin Script result code (15)
if anyone could guide me where and how to start troubleshooting this error i would be thankful. by the way we have not received any complains from the call center yet.

Check the logs in the PG involved. In your case, ABC_VRUPG8 (ID 5007), route TR1_IVRCallBack.24 (ID 5158).
The DNIS and Network Target ID associated with the failing route. This information is
located in the Peripheral Target table located in Configure ICM.
Scripts and Versions using the translation route(s)
-Sunil

T-code CO01 to create Production order:error message "No routing found"?

I use t-code CO01 to create Production order.At the first screen I select material 72 and plant HJW1 .At the Header creen,I input the data in the General tab and press return but the sap show the error message "No routing found".But I have create the routing for the material 72 and plant HJW1.I don't know why the sap found no routing.So my question was how to found the reason about why the sap can not found the routing and how to resolve this problem.Thank you.

Hi,
Probably you would have created the routing today, with valid from todays date. But the order you are creating may be with start date in past and system is not able to find and valid routing for the day.
I would suggest you to remove both the Basic "Start" and "End" and change the scheduling type to "Current date Scheduling", now enter. If system still not finding the routing, use the function "Read PP Master data".
Regards,
Prasobh

What is the command to check if there are any active calls before restarting the voice router?

what is the command to check if there are any active calls before restarting the voice router? thanks

Hi.
I can suggest show call active voice or show voice call status or show sip-ua call brief in case of SIP TSP.
HTH
Regards.
Carlo

Error creating voice message greeting

I tested my Skype number by calling myself and it only rang and rang. I just verified my settings which have voice messaging enabled. I haven't recorded a greeting and when I try I get "error creating voice message greeting" pop up.
Is the lack of a recorded greeting what is keeping voice messaging from working?
How do I fix the error to record my greeting?
I'm using Windows 8 and Chrome browser.
Thanks.

djloum wrote:
Since the last "update", (screw-up?), I get "voice message upload error" and "voice message playback error" incessantly. ONCE it allowed a custom message upload, but, for a 10-sec greeting it loaded a 3 MINUTE silence. Returning to the "default" greeting causes the same errors. Yes, I checked all my drivers and YES, I "tried turning it off and on again".
Please, run the DirectX diagnostics tool (32-bit). Run dxdiag.exe (Start - Run or Win key +R) then press enter or click "OK". Once the diagnostics completes, "Save All information..." to a text file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.
(i.e. compress DxDiag.txt ---> DxDiag.zip)
Even it the log says everything is "OK" it will still help me determine any possible solutions.

Voice router

i am using cisco 3745 router for voice router i am facing a problem after few days all calls are blocking once it restarted the problem we can rectify
i am using the System image file is "flash:c3745-ipvoice-mz.124-1.1.bin"
any updates of flash can reolve this issue .

Configuration for voice depends on the router platform.Make sure the configuration is fine.Refer URL
http://cisco.com/en/US/products/ps6441/products_configuration_guide_chapter09186a0080541bc6.html#wp1008931

Linux Error: 113: No route to host

After completeing 3.1 in the installation guide I jump down to chapter 4, but I can't get the web interface to work.
It doesn't matter how I access the URL, I've tried both http://localhost:8080/htmldb and http://realhostname:8080/htmldb/ with same result, no data at all, the connection is closed directly.
I've checked listener.log and found this:
02-NOV-2005 01:01:02 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=10.8.0.22)(PORT=2556)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host
02-NOV-2005 01:01:23 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=33183)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host
02-NOV-2005 01:02:54 * service_update * XE * 0
02-NOV-2005 01:03:01 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=X.Y.Z.W)(PORT=33509)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12571: TNS:packet writer failure
TNS-12560: TNS:protocol adapter error
TNS-00530: Protocol adapter error
Linux Error: 113: No route to host

Problem located (as usual after the 3 hours it took me to find the forum and post about it).
Using netstat and lsof I found that XE not only binds to 1521 and 8080, but also to port 33172 and since iptables blocks everything it got "No route to host".
The question is if 33172 is static or just a randomly chosen port number.

GoldenGate extract issue - TCP/IP error 113 (No route to host)

Hi All,
I have created a new replicat process on a new server. The old server is to be de-commissioned. after I created the replicat process on the new server (I copied the replicat prm file from the existing server - which is to be de-commissioned to new server and changed old encrypted password with new one and DISCARDFILE location), I modified the extract parameter file on source server. I changed RMTHOST and RMTTRAIL from older server name to new server name and old location to new location. once done , I stopped the extract and ran below command:
ADD RMTTRAIL /u01/app/ggs/dirdat/db, EXTRACT Ext1
and then started the extract process after which I am getting this error:
*2012-03-16 02:24:39 GGS ERROR 150 TCP/IP error 113 (No route to host).*
*2012-03-16 02:24:39 GGS ERROR 190 PROCESS ABENDING.*
I can very well ping both servers from both source and target. Any thoughts?
-Onkar

got the answer. It was firewall issue. When i turned the firewall down "service iptables stop", everything was smooth. I have raised request with the proper team to add the source ip in the target system firewall.
-Onkar

Unlisted error on voice over fr router

I am getting the following log messages daily on 2 routers running voice over frame (not quite the right group I know...) - I cannot find any references anywhere on the Cisco website.
Does anyone know what they mean & what is causing them ?
Thanks for any replys........
*Mar 6 07:40:03.133: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID! (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ...
*Mar 6 08:07:27.366: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID! (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ...
*Mar 6 08:17:04.613: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID! (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ...
*Mar 6 08:40:46.535: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID! (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ...
*Mar 6 09:10:26.846: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID!
*Mar 6 09:13:43.037: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID! (ours: 1, peer's:6) Call should continue ... (ours: 1, peer's:6) Call should continue ...
*Mar 6 09:18:20.175: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID! (ours: 1, peer's:6) Call should continue ...
*Mar 6 09:32:30.279: convert_redirect_ocn_IE: illegal ieID passedencode_redirect_ocn_IE: invalid ieID!

Thanks for that !!
And apologies again for posting in the wrong group (I read it as "voice over IP"!!)

Error while creating routing in CA01

Hi,
I'm trying to create a routing for a material using CA01 in dev environment. I have given the input of a material number and plant that exists in the system, but when i execute it throws an error saying "Material type ZPRD is not defined for task list type N"
Message no. CT761
it suggests with procedure :
To create a task list with task list type N for a material with material type ZPRD, you must maintain the material type allocation under General data in Customizing for routings.
I didn't understand this procedure. Can anyone please help me how to proceed to find the solution.
Appreciated if you can answer.

Hi Naveen,
It means you have to assign the task list type to material type ZPRD. Then it will carry its job:
The path is:
Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
I hope it will work.
Regards,
Madhu.G

Error while creating Routing using LSMW

Hi Guys ,
I am trying to create LSMW using Direct Input Method .
My structures are ::
RC271_DS Work center structure for direct input (for datasets)
RC27M_DS Material master view DIRECT INPUT routing for datasets
PLKO_DI_DS Header structure for direct input (for datasets)
PLPO_DI_DS Routing/item structure for direct input (for datasets.
I getting correct data from multiple flat files .
It's converting the data also .
But while executing start direct input method i am getting the followig error ....
You cannot edit the task list object with activity type
Please let me know problem guys .
Regards,
Raj

Hi Naveen,
It means you have to assign the task list type to material type ZPRD. Then it will carry its job:
The path is:
Go To-> SPRO-> IMG Activity-> Production-> Basic Data-> Routing-> General Data---> Define Material Type Assignments. T-Code: OP50
I hope it will work.
Regards,
Madhu.G

Error while creating router partition in 11.2

Hi,
I get the following error while running sdo_router_partition.partition_router. Please help in solving this.
Error starting at line 12 in command:
BEGIN
sdo_router_partition.partition_router;
END;
Error report:
ORA-20000: Oracle Router partitioning failed
ORA-06512: at "MDSYS.SDO_ROUTER_PARTITION", line 1321
ORA-06512: at line 2
20000. 00000 - "%s"
*Cause: The stored procedure 'raise_application_error'
was called which causes this error to be generated.
*Action: Correct the problem as described in the error message or contact
the application administrator or DBA for more information.

You might want to tune PKG_CLIENT_LOWSPEED_TIMEOUT before running "zoneadm install"
For example:
# export PKG_CLIENT_LOWSPEED_TIMEOUT=300

Error in voice router

Similar Messages

Maybe you are looking for