Error in WB Request while Transporting on STMS

Hi all,
I have a WB transport Request for my Report, where the Request contains Data Elements, Programs, SE11 Table, TMG, Screens, Tcode related to my development. Now, while moving the request from DEVELOPMENT to QUALITY system on STMS, it ended with ERROR 8.How can I know, in which object there is an Error while transporting.
My error is shown as..
Generation of Programs and Screens --- (8) Ended with errors

Dear Sekhar,
I think some object or component is missing in transport request, like function group, screen parameters or any one in your program. Activate all objects and resend dev to qas. If again same issue, you delete the request and generate new request.
Best of luck.
Regards,
Abbas.

Similar Messages

Error in routine(Inactive) while transporting from DEV to QA

Hi All,
I am currently working on moving the development from BI 7.0 Development to QA environment, while trying to move stuffs, i am facing an error stating that 2 of the routines are in INACTIVE Version, which stops me to move the objects to QA,
The error message looks like,
Object 'F0Q23H75A4P0BH0K98BKJBH48' (ROUT) of type 'Routine' is not available in version 'A
I can't able to find which routine is this, and how to find, which routine is inactive.
This stops my work to move other objects to QA. since, i am trying to move the process chain for masterdata along with its dependant objects to QA, The list is big, and so trying to move everything along with the process chain,
Can anyone, please help me out to find, what this routine stands for and how to find and make it ACTIVE, and move to QA,
I will assign points to everyone who responds,
Thanks in advance,
Regards
Pooja

Hi Shiva,
Its not able to find any entries for that specified ID, but anyways,, found why its getting failed, one of the infoobject had a empty routine, with no values, so,, took out that,, and activated and now it went through,
Anyways, thanks for your help Shiva,
I will assign points for it
THanks
Pooja

Error generated while transporting a request using TMS

Dear Techies,
While transporting a request iam getting an error message
"Transport control program tp ended with error code 0247"
Errors: add to buffer has problems with data- and/or cofile
Iam not getting any information to resolve the problem. Further In devlopment system iam unable to see the old requests and also new one whcih i have created and released. I tried adding the request manually in TMS, whcih resulted in the above mentioned error.Please suggest some solution

are you able see the objects when you are expanding the request/task
Also please check the followings & let us know the result
1. Goto transaction STMS. Menu verview -> Systems. Select system and Menu Check --> All available option
2. Goto transaction STMS. Menu verview -> Transport Routes, Menu Configuration --> Check --> All option
One more thing are you facing this problem with only for one specific request or for all requests
Edited by: Mrinal Das on Jan 5, 2011 3:10 PM

Error occurred while transporting request no. from development to productio

Hi Experts,
I have created a zreport (having a request number ) and activate the zreport ..
While transporting this request from development to production I face the error zreport is inactive .But when I check zreport in development server it is active ..
So how to transport this request.? Please help ..

Hello,
Can you ask the basis person to check the transport log and tell as to what error has occured. Most of the time transport fails if one of the dependent object fails to move. For example you have structure that you have used for table declaration in your prog. You moved the program but the structure was not moved. When Tranported , the program will result in an error and saying Struct not present.
What you can do immediately is to go on your prodcution server and try to do a syntax check of the program. I am sure it will show some error and from that you can carry out issue resolution. Also ask the basis person to hvae a look in to ur transport(he can see the same via STMS Tcode).
Regards
Saket Sharma

Error while Transporting Request

Hi All,
we have ECC 6.0 on Unix environment.
we had copied a production client with group selection, as we wanted all the three system PRD,DEV,QLT in sync.
the export was succesfully done.i copied Cofiles & Datafiles which are generated in DEV & Quality server,then i add request no in transport queue. the time when i copied transport request was not releasing from development.we checked the destination it was full so we removed the old request. then req is releasing.
after that i deleted the Cofile & datafile from OS level of DEV & QLT & trying to delete the reques from request queue. it is deleted but when im refreshing the queue its coming back in the queue.
while transporting other request its giving me error.
please help out me.

Hi Aasmi Gawas,
Please could you post the error?
We don't have a crystal ball to see the errors in your system...
Best Regards,
Erick ILarraza

Error while transporting a request

Hi,
I am transporting a request having infoobjects into a quality server.
while transporting its giving error as "Changes cannot be made,display user only".
but when i checked into Quality server changes has already been made and corresponding related objets like update rules are inactive....
so can i consider this request as successful transport??
and if transport is successful then why it is giving such kind of error,....because previously when i have transprted it never gave such error.
Thanks in advance.

Hi,
Transport is not sucessful to Quality system. you donot have sufficient authorization for transporting objects or system is locked for any changes.
contact BASIS person. and because of this infoobjects (infoobjects used inupdate rules, infoprovider...all are in deactive status).
check all objects in developement system and create new request and check request before transporting.
Regards
Daya Sagar

RFC error when trying to add transport request in queue in STMS..

Hi,
When I try to add a Transport request in queue in STMS transaction. I get RFC error saying some problem with tp program.
But when I go and check the RFC connection through STMS in system overview -> Communication -> RFC setting, it says RFC connection Ok.
What may be the issue ? I really need some light on this..
Regards,
Rajesh.

Hi Rajesh,
At times when u try to add the TR to a queue there would be 2 reasons.
1. If u have imported a TR into a system say QTY and it needs to be re imported, then we delete it fromthe STMS queue and add it again to re import it.
2. If u have some transport from external sap system to be imported here we place the data and Co files in the trans directory and then add the TR to this queue.
A TP failure happens if the data and co files does not exist in the TP directory or else, the TR target system is incorrectly mentioned.
Hope it helps.
Br,
Sri
Award points for helpful answers

Error while transporting the request from quality to production of BI

Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
           Execution of programs after import (XPRA)
           Transport request   : RBDK904992
           System              : RBP
           tp path             : tp
           Version and release: 372.04.04 700
           Post-import methods for change/transport request: RBDK904992
           Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
           Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
           Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
           Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
           Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
           Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
           The errors affect the following components:
             BW-WHM (Warehouse Management)
           Post-import methods of change/transport request RBDK904992 completed
               Start of subsequent processing ... 20080406140407
               End of subsequent processing... 20080406140408
           Execute reports for change/transport request: RBDK904992
           Reports for change/transport request RBDK904992 have been executed
               Start of................ 20080406140408
               End of.................. 20080406140408
           Execution of programs after import (XPRA)
           End date and time : 20080406140408
           Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.M

Hi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia

Error while transporting the transfermactions

hi,
i am transporting transformations dev to qty. while transporting i am getting error msg:
1) No Rules exists.
Transformation : Rules 1 could not be imported.
Transformation : Rules 2 could not be imported.
Transformation : Rules 3 could not be imported.
No fields were supplied.

Hi Shilpa Reddy
Just a quick spot it may be because of incorrect transport collection or multi modifications of transformation under a single transport .
Just replicate the data source in Target system RSA1>Source System>DS right click replicate .
and create a new transport in development system by reactivating the transformations and then release it in SE01 and then go to the Target system and go for STMS import it.
Small Note have you mapped all the info objects ,have imported the specified info objects into your target system if not then please do it and then import the transformation request.
Hope its clear a little..!
Thanks
(P159793)K M R
**Assigning points is the only way of saying thanks in SDN***
>
shilpa Reddy wrote:
> hi,
>
>
> i am transporting transformations dev to qty. while transporting i am getting error msg:
>
> 1) No Rules exists.
> Transformation : Rules 1 could not be imported.
> Transformation : Rules 2 could not be imported.
> Transformation : Rules 3 could not be imported.
>
>
> No fields were supplied.
Edited by: P159793 on Dec 30, 2008 4:55 PM

Error while transporting a Workbook

Hi Pioneers
I got an Error while transporting a Workbook from Development to quality.The error is "logical transport object 432L not found in table RSTLOGOPROP".
Could u let me out with a possible solution....Plz...
BR
Sekhar.D.R

Hi,
You have to create a new request and transport it again before transporting ensure that you collect all the dependent objects manually in the "Transport Connection" in the collection options.
Hope this helps
Assign points if useful
Regards,
venkat

Error while transporting webservice datasources

Hi all,
I have created webservice datasources to fetch EP data to BW. and now i am transporting that Datasources from DEV to QA. I have colllected datasources alone in one req. (source system i have created in QA manually and i mapped that with DEV)
But while transporting i am getting the folllowing error,
3S3T   Start of the after-import method RS_RSDS_AFTER_IMPORT for object type(s) RSDS (Activation Mode)
Error Screen output without connection to user .
Error when activating DataSource ZANS_MASTER BI7001
Please through some light is there any predefined settings i need to do in QA system?.
Thanks in advance,
V.Sen

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error While Transporting Smartforms from 832 client to 834 client

Hi
I released my Smartform and Program...
and i told our basis ppl to Transport the Code from 832 to 834
but while transporting they are Getting this error
Transport Control Program tp ended with error code 0212
Errors:could not access file as supposed.
My question is
Y they r getting this error?
is it link to Abap Program..
bcz they are telling that there is a wrong in my Program...
Bt my Program is working fine in 832 client...
Can any one help me on this?

Smitha,
If you haven't done any changes in the program then there is no need but you are saying you have created error messages.Haven't you tagged the changes related to the smartform as well as the Error messages (ie message class) in the same request?
If you have different requests one for error message and one for Smartform,then see to that both are transported.If smartform is using any of those error messages then you need to move the request which has got error messages first and then only the smartform related requests should be moved otherwise it will give a dump becuase by the time Smartform is moved to 834 the error messages request is not yet moved.Hence sequnece while moving the transport requests is very important.It is always advisable to have all the changes related to a program in one request.
And added to that do check the link given by Gautam too.
K.Kiran.

Error while transporting Datasources in Production

Dear All,
I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
Such errors have occured for most of the Datasources.
Can anyone let me know
1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
2) The possible solution to correct the error.
Request your kind help to overcome this problem.
Regards
Shalabh

Dear All,
Thanks for your kind reply.
There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
Let me know if I have not understood correctly.
Many thanks again for your efforts.
/Shalabh

Error While Transporting the DSOs

Hi Experts,
I am transporting a DSO from DEV to QA in 7.0 system.While transporting the DSO, i am getting the below mentioned error.
The creation of the export DataSource failed
Reading the Metadata of APMD0009 ...
Creating DataSource 8APMD0009 ...
Password logon no longer possible - too many failed attempts
Password logon no longer possible - too many failed attempts
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object APMD0009
The transport request contains just the DSO and not the Export datsource.I have also tried exporting both together still it failed.
I have referred OSS note No.597326 for the same.But it didnt helped in resolving the issue.
Can anyone please help me out with this problem.
Thanks,
Shalaka.

Hai shalaka,
jus check some points in u r transportation.
check the collection mode,grouping option - whether it is in dataflow before and after ,in data flow after,or in data flow before ,might be u have selected the in data flow before ,so the datasource error is happening here
check the datasource is from the same sap system or non sap system ,might be the system is having the password .so these are the problems check out and let me know the status of it and if it is solved by other means let me know
Suri..

Error while transporting custom datasource

Hi All,
Below is the scenario that was carried out in my project.
1. Created OHD to load data from a CUBE to Data base Table /BIC/ABC.
2. Created a custom Datasource ZABC_TEST with the above table.
3. Activated the DataSource and loaded the data. (Data load successfull. It works fine).
4. Tried transporting the above. But trows error while transporting the data source.
Error -- InfoSource ZABC_TEST is not available in source system BITST.
Let me know what can be done to solve the above error. Please suggest if i have missed out something.
Thanks in advance.
Maddy

HI,
The problem seems to be occuring since you are transporting both OHD and DS in the same TR request.
Transport first the DS in a request, then in another request transport the OHD.
This should resolve the issue.
hope this helps.
thanks,
rahul

Error in WB Request while Transporting on STMS

Similar Messages

Maybe you are looking for