Error in Web report "Error on Page"

Hello,
When I run a web report I provide values for Company code with option as * with cc value as 100*.
The report runs and gives initial output but I get an Error on page.
After this I am not able to navigate further in the report i.e  there is no action when I try to drill down.
Experts please help.
Regards,
Ketan

Hi KT,
You must have used a varialble while designing the query and you must be knowing which type it is.
To be more precise pattern selection is supported for selopt (selection option variables only).
Please note down that the "Contain Pattern" is not supported for the following variable types:
1) Single value variable
2) Multiple values variable
3) Range Value Variable
This feature is only supported by variable type 'Selection option'.
Regards,
Michael

Similar Messages

  • Error in web reports (Report 10g r2)

    Hi,
    I am working on Developer 6i and has started learning 10g.
    I created a web report.If i run it in there is an error in web report.
    500 Internal Server Error
    OracleJSP: oracle.jsp.provider.JspCompileException:
    Errors compiling:C:\Users\USER\AppData\Local\Temp\docroot\3000\default\defaultWebApp\persistence\_pages\\_MODULE1000202980.java
    Error occurred during initialization of VM Could not reserve enough space for object heap
    Please guide me how to resolve this.
    Regards
    Satya

    Hi Sathya,
    Check this link your issue is already been discussed,
    http://stackoverflow.com/questions/9303889/error-occurred-during-initialization-of-vm-could-not-reserve-enough-space-for

  • The action cannot be performed error for Webi Report

    HI,
    I am getting the error The action cannot be performed error for Webi Report. I am getting this error after i save the report and open it again.

    This is happening for only 1 particular report. In the end  i  removed some of the objects from the query and added some new ones.
    Strangely it worked!

  • Webi Report Error: INF

    Hi All
    I am having an issue with one of the WEBI report. As soon as I open the report it pops up a box with header HTTP Status 500 - Internal error and error in the box is (Error: INF). On data refresh it gives the same error after couple of minutes, but if I edit the report and refresh the data (from edit report page) it gets the report contents. There are other reports which are based on the same universe and work fine.
    Any idea/direction is much appreciated.
    Best regards,

    Hi,
    Adapt is actually a tracking system used to track code changes (enhancements, bugs etc.) so that number can be thought of like an incident number.  So you won't see that in your error message.  The Adapt I referenced was not reproducible in FP3.5. 
    It is indeed possible that you are seeing a different problem (sometimes the same error message is given for different problems).  So one last thing I could suggest before you close this off would be that you can raise this to technical support and depending on the exact issue (does it require connectivity to your database etc.) they may be able to test the report internally to confirm it's fixed in 3.5.  However, given that you don't want to patch since you are moving to a new version anyway, that would probably be a waste of time for all parties involved.
    Sorry for the confusion with the Adapt etc.
    Thanks,
    John

  • Webi report error (BO 4.0)

    Hi All,
    I need your help, now m working on BO 4.0. While refreshing Webi report in BO 4.0, getting error:
    Database error: The SAP SSO authentication process will fail because the current user doesn't have an alias that matches system BM7CLNT100.. (IES 10901)
    Could anyone give some idea ASAP?
    Regards,

    Hi,
    Please search the knowledge base at www.service.sap.com/xsearch before posting..
    There's a KBA here for this problem : Note 1501524 - "The SAP SSO authentication process will fail because the current user doesn't have alias that matches system [System ID]CLNT[Client Id]  
    Regards,
    H

  • Error - Generating WebI report with Multi-Source universe (.unx)

    Hello ,
    While creating WebI report from multisource universe (.unx) , created using
    relational connection with SAP BW JCO connector , following JCO exception is
    cropping up
    Database error: [Data Federator Driver] [Server] [Connector 'Test_RCN_01'] SAP
    NetWeaver BW has reported an exception: com.sap.conn.jco.JCoException: (101)
    JCO_ERROR_CONFIGURATION: Server configuration for DF_SERV-bitest-3300-NOSNC is
    already used for a running server. (IES 10901) (WIS 10901)
    Steps followed for Multi-source universe creation
    1. creating relation connection ( Passed)
    2. Creating Data foundation using this connection (passed)
    3. Mapping two parameters (programIDMapping, hostname ) with RFC destination and
    BW FQDN ( passed )
    4. Creating Business layer for this Data foundation (passed)
    5. Open webintelligence with SSO and while creating the reports using the .unx ,
    the above error is coming
    already implemented SAP note no 1638647
    System used
    SAP BW 7.1 with EHP 1 and SP 10
    SAP BI 4.0 SP2
    Data federation service admin tool version 14.0.2
    thanks,
    Rajib

    Hi,
    try with this.
    Starting the Gateway Service on the Message Server resolved this issue.
    There have also been reports of this issue when name resolution issues occur between the client and the Message Server machine.  As a test, you can add the Message Server name and IP address to the Windows\System32\Drivers\etc\hosts file.
    Or check SAP note 1590518.
    Thanks,
    Amit

  • Scheduling webi report error

    Hi Guys,
    How u all? Guys I need help from your side, While refreshing Webi report in 3.1, getting error:
    A database error occured. The database error text is: Failed to execute MDX query. Reason: Inconsistent input parameter (parameter: <unknown>, value <unknown>). (WIS 10901).
    Kindly help me.
    Thanks,

    Hi,
    This error is very common when the report is based on BW query.
    1. try to schedule the reports and when selecting the prompt values click on refresh the prompt data which will pull the new data values from BW, many times it happens that we take the by default value when refreshing which may have a space etc.
    if the above condition doesn't work try
    2. I would recommend to refresh the universe structure and map the objects i.e. pull the objects again in the reports
    or
    last option would be to enable MDX and SOFA logs to get more details: (Instrucitons on capturing the MDX statement from the Webi Server can be found in SAP Notes 1260004, 1380517 or 1235111.)
    Thanks,
    aKs

  • Error in WEBI report and MDXTEST  when using Dimensions in Prompt

    Hi,
    I am using BOXIR3.1 SP2, SAPBI 7.0
    I m creating a webI report (Universe is on SAP BI Query.) which include following objcets in Query section of WebI pannel:
    Business partner, Account Class, Total Arreas count.
    The Condition pane of Webi Includes Prompt on object "Account Class".
    When I run a report, I get List of values for Dimension Account Class, when I select one of available value eg: Commercial Customer,I get Following Error.
    A database error occured. The database error text is: The MDX query SELECT  { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] }  ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS,  { [Z_FCACTBP__0UCACC_CLAS].[Commercial Customers] }  ) ON ROWS FROM [ZFC_M07/Z_FC_M07_Q002]  failed to execute with the error Value Commercial Customers for characteristic Z_FCACTBP__0UCACC_CLAS unknown. (WIS 10901)
    I tried running same query in MDXTEST editor of BI. I got same error!!!
    Then I tried changing the MDX Query as:
    SELECT  { [Measures].[4EITIDWAFWLLZD2ONIAVCKD56] } 
    ON COLUMNS , NON EMPTY CROSSJOIN( [Z_BPATNER].[LEVEL01].MEMBERS,  { [Z_FCACTBP__0UCACC_CLAS].[COM] }  ) ON ROWS 
    FROM [ZFC_M07/Z_FC_M07_Q002]
    Then it worked Fine!!!  If you observe the change is in the value of Prompt Account Class [Z_FCACTBP__0UCACC_CLAS].[COM]
    By default Dimension object in Universe shows text value, but when I changed the MDXQuery with Key value (This is one of the value of value is for [Z_FCACTBP__0UCACC_CLAS].[Level01] object in mDX test Editor.) It works fine.
    I wonder How do i solve this problem!! List of values available in dimension cannot be changed at universe level.
    Please let me know if any solution for this exists.
    regads,
    Nisha.

    Hi Ingo,
    I am creating the prompt on the dimension "Account Class" at WebI level.
    The Technical name of this object is: [Z_FCACTBP__0UCACC_CLAS].[LEVEL01]
    Also,
    I confirmed that Index Awareness is applied on this dimension as [Z_FCACTBP__0UCACC_CLAS].[LEVEL01].[TECH_NAME].
    This Dimension has detail object called "Account Class (Key) "and "Account Class (Medium name)".
    MDXtest editor in SAP, shows me text as well as [ Level01] values:
    Eg: Account Class InfoObject has values "Commercial Customer " (This is text value)and  "[Z_FCACTBP__0UCACC_CLAS].[COM]".
    COM Refers to Commercial Customer .
    So In WebI when I use Dimension "Account Class" as prompt, I get Text value of this InfoObject which is "Commercial Customer ".
    and MDXQuery Fails. But when I modify this query in mDXTEST Editor with value as "[Z_FCACTBP__0UCACC_CLAS].[COM]", It work fine.
    I donu2019t understand the reason, since this problem is with almost 90% of Dimension object.
    When I delete this object from universe, and refresh the universe then webI works fine.
    But, if for some reason I refresh the universe again, the Dimension object as a prompt doesnu2019t work!!!
    This error occurs every time I refresh the universe.
    We are in UAT phase and soon to go Live!!  We cannot afford to delete the object every time I refresh the universe.
    Please let me know your inputs.
    regards,
    Nisha.
    Edited by: Nisha Makhija on Oct 15, 2009 4:56 PM

  • Webi report error

    Hi All,
    While refreshing Webi report, I am getting error below:
    "An internal error occured while calling 'processDPCommands' API. (Error: ERR_WIS_30270)".
    Could anyone help me?
    Regards,

    Hi Manoj,
    There are many KBases surrounding this error.
    1352299 - Error:"An internal error occured while calling 'processDPCommands' API. (Error:ERR_WIS_30270) " while refreshing the Webi Report in Infoview
    1568293 - "ProcessDPCommnands API Error" while refreshing WebI report in InfoView and Web Intelligence Rich Client.
    1643514 - Error "An internal error occured while calling 'processDPCommands' API. (Error: ERR_WIS_30270)" when cancel the query in Web Intelligence document
    A few thing to check\test would be:
    Change CMC server properties:　
    Please go to Central Management console.
    Go to Servers.
    From left hand side panel select Server categories and then Web intelligence.
    Right click the Webintelligenceprocessingserver and select Properties.
    Set Binary Stream Maximum size to 500 (it is in MB).
    Set Maximum character stream size to 500 (it is in MB).
    Click save and close.
    Change in webi.properties file:
    Open the 'webi.properties' form this location and make the required changes to changes the Heap size.
    D:\Program Files (x86)\Business Objects\Tomcat55\webapps\AnalyticalReporting\WEB-INF\classes
    Add the following line to the end of the webi.properties file (assuming that the Java Heap Max is set to 1024):
    MAX_HEAP_SIZE=1024000000
    Note: The default value of MAX_HEAP_SIZE is 5000000 and is appropriate for a Java Heap setting of 512.
    Stop and then restart the Tomcat application server.
    Note: The Tomcat limitation for the Heap Size setting is 1.5 GB (1536 MB), but the higher the value you set, the worse the performance when you run reports. If you try to increase the value higher than this, then Tomcat will not start.
    I hope this is a very, very helpful answer to you.
    Kind regards,
    John

  • Scheduled webi report error in dashboard

    Hi ,
    we are using SAP BW as backend and Dashboard is created using Live ofive connectivity with latest instance of scheduled report which is scheduled every morning.
    But some of the reports scheduled is failing and throwing this error as
    A database error occured. The database error text is: (CS) "Fail to create an instance of Job" . (WIS 10901) 
    This is occurring many times
    Because of this while opening dashboard it throws error
    The current refresh option requires a report instance that does not exist. (LO 26301)
    Regards
    Gaurav Mang

    Hi Gaurav,
    How many Webi reports do you have? Do they all use the same data source? How big are the reports - 100 rows? 100,000 rows? How long does each take to run?
    They may be failing if the server is running out of memory. Or is it the same Webi reports failing to schedule? In which case obviously there's a problem with those reports.

  • Error updating two reports on same page! Could you have a look please?

    Hey guys!
    I have the following situation :
    two updateable reports on one page with IDs 'DATE_REPORT' and 'WORK_REPORT'
    two pl/sql processes on submit after c.... named 'SUBMIT_DATE' and 'SUBMIT_WORK'
    two buttons named 'SAVE_DATE' and 'SAVE_WORK'
    Finally, the insert and update processes are conditioned to Request = Expression 1 where for the 'DATE_REPORT' it is set to 'SAVE_DATE' and for the 'WORK_REPORT' it is logically set to 'SAVE_WORK'. There are no extra button conditions.
    My problem: No matter which button I press, the array is build up from the columns of the first report and continues to add rows of the second report.
    For instance: 'DATE_REPORT' has 11 rows and 'WORK_REPORT' has 9 rows. In the debug mode I can see that the array is build up using the 'DATE_REPORT' although 'SAVE_WORK' was accepted as the request. The same problem vice versa for the other update.
    ......column CNT_ARBEIT_CRIT_DATE mapped to WWV_Flow.g_f02
    ......column LNG_ARBEITSSCHRITT mapped to WWV_Flow.g_f03
    ......column STR_ARBEITSSCHRITT not mapped - not stateful.
    ......column DATE_GP_X_START mapped to WWV_Flow.g_f04
    ......column DATE_GP_X_END mapped to WWV_Flow.g_f05
    ......column DATE_R_X_START mapped to WWV_Flow.g_f06
    ......column DATE_R_X_END mapped to WWV_Flow.g_f07
    ......column LNG_GEBIET mapped to WWV_Flow.g_f08
    ......column CS not mapped - not stateful.
    ...array has 20 row(s). Used f08 to count.
    Validate report columns(ApexLib_TabForm.validateColumns)
    Row 12 has checksum error. ORA-01403: no data found ORA-01403: no data found ORA-01403: no data found
    ...Row 12
    ...LNG_ARBEITSSCHRITT
    ...CNT_ARBEIT_CRIT_DATE
    ......is not required
    ...LNG_GEBIET
    ......is not required
    ...DATE_GP_X_START
    ......is not required
    ...DATE_GP_X_END
    ......is not required
    ...DATE_R_X_START
    ......is not required
    ...DATE_R_X_END
    0.00: A C C E P T: Request="SAVE_WORK"How can I make sure the arrays are made up from the reports that are subject to the update???
    Many thanks for reading this post and giving some help if you have an idea!
    Regards,
    Seb
    Edited by: skahlert on 13.03.2010 10:57

    Hi Peter! Thanks for your answer. Well, this is what I already assumed! Two updateable reports with different data sources on one page will not work taht easily.
    Both reports have different amounts of columns in my case! I might create some pseudocolumns in the first report to match the columns in the second one. Hence I could try to build up the array like that.
    However, I believe it will not work as I can't use the primary key for the insert procedure in my second report. This is due to the design of the report.
    My initial idea was to somehow deactivate my report regions before running the update resp. insert procedure.
    I thought of using the htp.p statement with 'hideShow(''DATE_REPORT'')' and 'hideShow(''WORK_REPORT'')' to deactivate the regions and run the dml processes afterwards. Of course hiding the regions depending on the requested dml process. My question is if it will actually work like that. My try to hide the regions failed. The DATE_REPORT was indeed hidden but the update was still unsuccessful. I believe hiding the region is not sufficient.
    Do you have a hint how I can completely disable or deactivate the reports using javascript from pl/sql?
    Many thanks and have a splendid sunday!
    Regards,
    Sebastian

  • Runtime error in Webi Report

    Dear All,
    I have a Webi Report, it is taking too much of time in data retrieval and finally resulting in the following Run time Error:
    Microsoft Visual C++ Run time Library
    Run time Error!
    Program: C\Program Files\Business Objects\....
    The application has requested the Run time to terminate in an unusual way.
    Please contact the application's support team for more information.
    Please help in this.
    In this report I am using Division, Year and Calendar day at the Query Filter level with Operators "InList" for Division and Year and "Less than or Equal to" for Calendar Day.
    Regards,
    Arun

    Hi,
    this is a known issue. Please check these corrective notes:
    1494404 - Using Webi query filters based on dates using "Greater than" and "Less than" does not work properly when based on SAP BEx.  
    1467239 - Date prompts produce incorrect result with 'Between', 'Greater than or Equal' or 'Less than or Equal' filter operators when a Webintelligence report is based on OLAP universe  
    1614245 - Prompts on date ranges return values outside the given range in Web Intelligence reports based on a SAP BW data source. 
    Regards,
    H

  • Web Reporting Error

    Hello Gurus,
               I am new to web reporting and I followed this link
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22
    and I was getting this error:
    Service cannot be reached
    What has happened?
    URL http://premiersap:8000/sap/bw/BEx call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system PRD with error code 403 and for the reason Forbidden.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:premiersap_PRD_00-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    Can anyone help me to solve this problem?
    Any help appreciated with points.
    Thanks in advace
    pavan

    Hi Pavan,
    Please check the How to guide "How to enable web functionality after bw installation" which is having step by step procedure to enable web reporting.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/994a06ed-0c01-0010-878b-e796a9060209
    www.sdn.sap.com/irj/sdn/howtoguides
    Hope this helps.
    Regards
    Ganesh
    *Assign points if this helps

  • Error in webi report  - ORA-06502

    Dear All,
    I have create an object in Universe "description" , I am using this object in WEBI report.
    When I run the WEBI report I am getting below error:
    Database error occurred :the databasr error text is  ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    ORA-06512: at line 1 .  (Error: WIS 10901)
    This object is working fine in Dev and Quality.
    But it is getting above error in the Prod environment in WEBI report.
    Actually i think its this "description" object which is the reason
    dbms_lob.substr( xyz.DESCRIPTION, 4000, 1 )
    Any help is highly appreciated

    hello,
    yes the DB across the landscapes is same version ...
    the failure is due to....see the below test in the field
    "cess Code |ZCCONSI| configured "
    These 'bar' looking characters are what is causing the failure:
    Any ideas on how to fix this.....will string function work at all for this?
    Thanks

  • Webi Reports error on refresh - source - SAP BW

    Hi,
    We recently upgraded out SAP BW to SP7. Since then, all our webi reports have been giving the following error when we try to refresh the reports:
    "A database error occured. The database error text is: A pointer intended for use is NULL. m_pCommand is NULL in SAPRowsetDataModel::getCurrentRow, exception raised at line 372 of file .\source\saprowsetdatamodel.cpp. (WIS 10901)"
    The following steps have been taken to resolve the issue with no success:
    1. Refreshing the universe
    2. Reimporting roles from BW into BO
    3. Creating new Webi reports
    Has anyone encountered similar issues? Any solution to this issue?
    Regards,
    Sameer

    Hi
    I have searched and found one support message with the same problem and it was fixed by installing FP3.1 for BOE.
    Additionally you might check the following SAP notes (some of them might be integrated in SP7 already):
    1446246
    1432162
    1499233
    1485648
    1441767
    1438091
    1432162
    1420169
    1406184
    1404328
    1399686
    1304564
    Regards
    Roland

Maybe you are looking for