Error in webdynpro ( f4 help)

hi experts,
              i have declare one inputfield.
             it is working fine .the only problem is with F4 help. when ever i press F4 it is giving me a dump.
             Could not find attribute STAT_ERO
what can be the problem??

Hi,
for F4 help u have to add wdr_ovs into component usege. You have to select ovs into input help mode for the particular field and give ovs component usage (wdr_ovs) . i think it will helpful . once you give this the methode will created directely in method list. code will be generated automatically. You need to pass that field. So it will work. If you want code i will sed you that also.
thanks
Hemant ghiya

Similar Messages

HT1212 I am unable to get our of a continuous cycle when trying to update or restore my iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.

When I tried to update my iPad I got an error 9. Now, I am unable to access my iPad. It is in a continuous cycle when I try to update or restore the iPad 2. Plug in to iTunes 12.0.1 (latest version). Click update, told can't update, have to restore. Restore fails with error 9. Any help appreciated.
Here's the cycle:
I plug in my iPad when “cable to iTunes shows on iPad screen. It says "Your iPad can't be updated, you must restore it to factory settings." That bad enough news, but it gets worse.
Click Restore
Extracting software…
Preparing iPad for restore
Waiting for iPad…
Verifying iPad restore with Apple…
(empty bar under the Apple logo…does not show any activity)
“The iPad “iPad” could not be restored. An unknown error occurred (9).”
Notes: I just upgraded to OS X Yosemite 10.10.1 on my iMac (27-inch, Mid 2011) in the last week. It’s the first time I’m tried to backup/update my iPad since the iMac update.
I swapped out the USB cable to a new cable and get the same results.
I also unplugged all other USB devices from the iMac and security on my iPad and still get the same results.
I find it strange that it shows no Serial number for my my iPad 2 when plugged in. It shows “Serial Number: n/a on the screen when it displays: “iPad Recovery Mode To update your iPad without erasing its contents, click Update. To restore your iPad to its factory settings, click Restore iPad.
I prefer to update my iPad, but it displays “Your iPad can’t be updated, you must restore it to factory settings. If you previously backed up the iPad, click Restore Backup after the restore process completes.”
It’s a continuous loop. I get the display on my iPad to plug in the iPad to iTunes, plug it in which ends after going through the above procedure saying an error occurred (9).
So now I cannot use my iPad. When I turn it on I get the display showing me to plug it into iTunes with the cable. Since this is the only option I have I plug it in and the loop begins.
Any advice would be appreciated.
Thanks!

Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Service desk error creating support message "help- create support message"

Hi
I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
In order solve the error I review:
- The satellite SAP system is at the iBase installed components.
- I've Assign Number Range for ABA notifications at SLF1 transaction.
- I've Checked number range for Service Desk Message at SLFN transaction.
- I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
- (satellite system) Transaction sm30, table BCOS_CUST:
   Appl.            +       Dest.                                  +                     +
   OSS_MSG   W     SM_SMGCLNT010_BACK    CUST620          1.0
   TST_CUS                                                        0120009939
   RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
- (satellite system) I logged with a SAP user with these roles:
SAP_SUPPDESK_CREATE
SAP_BC_CUS_CUSTOMIZER according SAP NOTE 834534
SAP_BC_CUS_ADMIN       according SAP NOTE 834534
SAP_SV_FDB_NOTIF_BC_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
All these roles are mantained.
- I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
Please could you help me?
Thanks and Regards
Raul

Hi,
When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
========================================================================
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time          10.07.2008 10:17:26
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED" " "
    "CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
    "PROFILE_CONTAINS_PARTNERDEP"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
Information on where terminated
    Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
     in "PROFILE_CONTAINS_PARTNERDEP".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 41
    of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
=========================================================================
Thanks and Regards
Raul

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I keep getting an error when exporting. Help

I have been trying to export a video, and when ever is 1/2 way it gives me a system error.
Can anyone help?
thanks.
G5 2.3Ghz Mac OS X (10.4.1)

This is often caused by a corrupted render file. You might try isolating it by the old technique of marking in/out for half of the timeline, then halving that, etc... until you find the offending area, then remove the renders for that section by selecting it and pressing ctrl-b, ctrl-b (that's control-b twice). This will disable/enable a clip and force a re-render...
Patrick

My itunes is not working at all, wont read my iphone, ipod, and when i click on itunes store it says unkown error -3212 pls someone help me?

when i plug my iphone or ipod in they do not show up, when i click on itunes store it says unkown error -3212
someone please help me i tried just about everything

Macafee security center is may be the culprit.
Open Macafee then: select;
Internet & Network > configure
Firewall > Advanced
Programm Permissions > scroll down to Itunes
Highlight (click on)
Then Grant full access to Itunes.
APPLY then OK
When you select store from Itunes you will need to register with Itunes.
Try that or:
Disable your firewall.
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
If Someone Helped You, Click
"This Helped Me"
If Someone Solved Your Question, Click
"This Solved My Question"

I signed up tp lastPass premium and installed the app on my phone. I can no longer download mail. I am asked for a password which I supply my my email but it is not recognised and says there is a domain error. Can anybody help please

I signed up to lastPass premium and installed the app on my phone. I can no longer download mail. I am asked for a password (I give my normal log-in) but it is not recognised and says there is a domain error. Can anybody help please

Try deleting that app, then see if you have the same issue.

When updating my ipod Nano, I get the error message Unknown Error 9006. Any help is appreciated.

When updating my iPod Nano, I get the error message: Unknown Error 9006. Any help is appreciated.

See this
http://support.apple.com/kb/TS3694#9006

HT201210 Just updates itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

Just updated itunes software on my windows PC and now it won't open because of Runtime error R6034 can you help?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Adobe Premiere Elements 10 has stopped working Windows 7 Error Message - Can someone help?

Hello Everyone,
I wanted to checkout the new version of Adboe Premiere Elements 10 for doing some film editing so I downloaded the Trial Version using the Adobe Download Manager. Upon installation, I double-clicked the Elements icon and after a few seconds of trying to open, I get the following:
After surfing the web, I followed several steps to ensure I had all of the latest drivers for audio/video components and the latest version of QuickTime. I uninstalled and re-installed Elements 10 and ensured that my virus protection was turned off.
I am still getting the same error.
Can anyone help?
Thank you in advance!
Will

Will,
Welcome to the forum.
This ARTICLE has a checklist on getting PrE to work well on one's computer, and then it goes into tuning the computer and OS. Last, there are linked articles on troubleshooting, and on many aspects of one's computer and OS, when the general tune up tips do not fix things. If the checklist, and tuneup tips do not help, then step through the troubleshooting tips, one at a time, as they work up in "degree of difficulty."
Good luck,
Hunt

TS3694 How can I fix this type of error in iphone 4?"The iphone could not be restored. An unknown error occurred (3194) "please help me.

Hi everybody !
AT&T company is unlocked (factory)my iphone4 before 3 days ago so i want to restore to unlock iphone 4 with itunes but it is not restore.
How can I fix this type of error in iphone 4?- "The iphone could not be restored. An unknown error occurred (3194) "
please help me in nepali language(if posible) or english. thank you.

http://support.apple.com/kb/TS3694#error3194
This means that either your firewall/antivirus is blocking access to Apple's servers, or you have used your computer to jailbreak an iDevice in the past. The link above tells you how to resolve this issue.

HT4097 my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.

That error sometimes indicates a hardware problem. See 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
 Cheers, Tom

Hello I Download Adobe Photoshop CC 2014 Last Night i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message I Need Help Can You Resolve This Problem i Tried Creative Cloud Sign Out Nd Sign iN But iT DidnT ReSolve My

Hello I Download Adobe Photoshop CC 2014 Last Night
i INSTALLED it But it Crashes in 30-40 Sec After i Launch the Product Without Any Error Message
I Need Help Can You Resolve This Problem

Lotfi are you receiving any error messages during the installation? I would recommend reviewing your installation logs for errors. Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate and interpret your installation log files. You are welcome to post any specific errors you discover to this discussion.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service.

Photoshop CS6 could not update successfully. Error codes Adobe Photoshop 13.0.1.3 Installation failed. Error Code: U44M1P7 Extension Manager 6.0.8 Update Installation failed. Error Code: U44M1P7 Please help me figure out how to call customer service. I would prefer to talk to someone directly.

Are you using any disk cleaner or optimization tools like CleanMymac or Mackeeper?
Regards,
Ashutosh

Error in webdynpro ( f4 help)

Similar Messages

Maybe you are looking for