Error in WEBi
Hello,
Has anyone got this below error message while trying to refresh WEBi report .
I am directly accessing BEx queries in WEBi.
It was running fine earlier and today i am getting this error message .
After i tried refreshing for two times, the third time i did not got the error message.
But still i would like to know what caused this error .
Regards,
Ashutosh Singh
Hi Satish.
I am not really sure what was happening. Because the process chains gets finished early morning so i don't think that compression/aggregates roll up was a problem.
And neither the process chains failed today.
So may be it is some communication issue .
Regards,
Ashutosh Singh
Similar Messages
-
Error while web application deployment in NetBeans5.5
Error while web application deployment in NetBeans5.5. I am always getting Tomcat deployment error. using Netbeans 5.5.1 with bundeld tomcat. But in some machines its working fine.
regards
jossy v joseWhat is the error message you see?
Are there any stacktraces or other relevant messages in the ide log file? (The ide log file is [userdir]/var/log/messages.log. On userdir: http://blogs.sun.com/karthikr/entry/jse_directories)
You can also check the server log file to see if there are more detailed messages.
You can also try setting ant's verbose level to debug or verbose (Tools | Options | Miscellaneous | Ant | Verbosity Level) and check the output. -
Getting error with Web Templates in BI 7.0
Hi Everyone,
We have upgraded BW3.5 to BW7.0. When we are executing any Web Template in browser we are getting this error-
RSBOLAP 018 Java system error:call FM RSWR_TEMPLATE_PROCESS_PROXY to ProgId CHWSXID01.....
For your information we have installed EP Usage and BI on the portal but Portal is not configured to the BI. Is it necessary to configure Portal to the BI?
After this when we are login to the portal we are getting this error-
500 Internal Server Error
BEx Web Application
Failed to process request; contact your system administrator
Error Summary
Exception occured while processing the current request; this exception cannot be handled by the application or framework
If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
Root Cause
The initial exception that caused the request to fail was:
Cannot find BI master system
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
Details: Full Exception Chain
System Environment
Server
BI Java Release: 7 - Patch level: 0000000013 - Description: BI Web Applications Java - Additional info: - Production mode: true
BI ABAP unknown
Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Hewlett-Packard Company - 1.4.2 1.4.2.14-070618-19:48-PA_RISC2.0W PA2.0W (aCC_AP)
Operating System HP-UX - PA_RISC2.0W - B.11.11
Deployed SCAs
SCA Version SP Patch Compiled Deployed
ADSSAP 7.00 13 0 2007-08-12 01:18:54 CEST 2007-11-17 02:43:53 CET
BASETABLES 7.00 13 0 2007-08-12 01:36:38 CEST 2007-11-17 01:22:45 CET
BI-BASE-S 7.00 13 0 2007-08-12 12:03:10 CEST 2007-12-08 09:58:16 CET
BI-IBC 7.00 13 0 2007-08-12 12:03:28 CEST 2007-12-08 09:58:26 CET
BI-REPPLAN 7.00 13 0 2007-08-09 07:49:39 CEST 2007-12-08 10:01:05 CET
BI-WDALV 7.00 13 0 2007-08-09 07:49:47 CEST 2007-12-08 09:58:55 CET
BIWEBAPP 7.00 13 0 2007-08-12 12:05:56 CEST 2007-12-08 09:43:55 CET
BI_MMR 7.00 13 0 2007-08-12 01:37:49 CEST 2007-11-17 02:44:46 CET
BI_UDI 7.00 13 0 2007-08-11 19:04:00 CEST 2007-11-17 02:46:49 CET
CAF 7.00 13 0 2007-08-09 09:23:15 CEST 2007-11-17 02:53:13 CET
CAF-KM 7.00 13 0 2007-08-09 07:54:22 CEST 2007-12-08 10:21:28 CET
CAF-UM 7.00 13 0 2007-08-09 09:23:24 CEST 2007-11-17 02:54:18 CET
CORE-TOOLS 7.00 13 0 2007-08-12 01:41:21 CEST 2007-11-17 01:19:15 CET
EP-PSERV 7.00 13 0 2007-09-06 14:03:50 CEST 2007-12-08 10:02:22 CET
EP-WDC 7.00 13 0 2007-08-12 12:41:08 CEST 2007-12-08 10:03:50 CET
EPBC 7.00 13 0 2007-08-12 12:37:44 CEST 2007-12-08 08:07:23 CET
EPBC2 7.00 13 0 2007-08-12 12:38:06 CEST 2007-12-08 10:03:56 CET
JLOGVIEW 7.00 13 0 2007-08-12 00:16:00 CEST 2007-11-17 01:19:52 CET
JSPM 7.00 13 0 2007-08-12 00:17:00 CEST 2007-12-06 16:41:39 CET
KM-KW_JIKS 7.00 13 0 2007-08-12 01:45:19 CEST 2007-11-17 02:54:37 CET
KMC-BC 7.00 13 0 2007-08-12 12:41:47 CEST 2007-12-08 10:05:28 CET
KMC-CM 7.00 13 0 2007-08-12 12:43:04 CEST 2007-12-08 10:06:52 CET
KMC-COLL 7.00 13 0 2007-08-12 12:43:35 CEST 2007-12-08 10:07:49 CET
LM-PORTAL 7.00 13 0 2007-08-09 07:58:38 CEST 2007-12-08 10:07:59 CET
LM-SERVICE 6.40 10 0 2004-12-23 01:42:43 CET 2007-11-17 01:18:14 CET
LM-TOOLS 7.00 13 0 2007-09-06 10:46:34 CEST 2007-11-17 03:05:32 CET
NET-PDK 7.00 13 0 2007-08-12 12:45:34 CEST 2007-12-08 09:51:51 CET
RTC 7.00 13 0 2007-08-12 12:48:07 CEST 2007-12-08 09:51:56 CET
RTC-STREAM 7.00 13 0 2007-08-12 12:48:07 CEST 2007-12-08 10:08:05 CET
SAP-EU 7.00 13 0 2007-08-09 08:01:01 CEST 2007-12-08 10:19:31 CET
SAP-JEE 7.00 13 0 2007-08-12 01:53:11 CEST 2007-11-17 01:24:19 CET
SAP-JEECOR 7.00 13 0 2007-09-07 08:23:34 CEST 2007-11-17 01:27:06 CET
SAP_JTECHF 7.00 13 0 2007-08-12 01:56:44 CEST 2007-11-17 01:28:18 CET
SAP_JTECHS 7.00 13 0 2007-08-12 01:59:51 CEST 2007-11-17 02:32:48 CET
UMEADMIN 7.00 13 0 2007-08-09 09:39:47 CEST 2007-11-17 03:06:23 CET
UWLJWF 7.00 13 0 2007-08-12 12:52:23 CEST 2007-12-08 10:08:51 CET
VCBASE 7.00 13 0 2007-08-12 12:52:34 CEST 2007-12-08 10:22:05 CET
VCFLEX 7.00 13 0 2007-08-12 12:53:39 CEST 2007-12-08 10:21:32 CET
VCFRAMEWORK 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:21:42 CET
VCKITBI 7.00 13 0 2007-08-12 12:23:20 CEST 2007-12-08 10:22:10 CET
VCKITGP 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:22:15 CET
VCKITXX 7.00 13 0 2007-08-12 12:53:51 CEST 2007-12-08 10:22:19 CET
WDEXTENSIONS 7.00 13 0 2007-08-09 08:05:30 CEST 2007-12-08 10:24:17 CET
Full Exception Chain
Log ID 00306EF4B9BB0076000000120000327700044245C894263C
com.sap.ip.bi.base.service.connection.ConnectionException: Cannot find BI master system
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemAlias(GenericConnectionPool.java:81)
at com.sap.ip.bi.base.service.connection.impl.GenericConnectionPool.getMasterSystemConnection(GenericConnectionPool.java:60)
at com.sap.ip.bi.base.application.impl.Application.createService(Application.java:459)
at com.sap.ip.bi.base.application.impl.Application.getProperty(Application.java:679)
at com.sap.ip.bi.base.application.impl.Application.startApplicationStep(Application.java:279)
at com.sap.ip.bi.base.application.impl.Application.initialization(Application.java:259)
at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:172)
at com.sap.ip.bi.base.application.ApplicationFactory.createApplication(ApplicationFactory.java:65)
at com.sap.ip.bi.webapplications.runtime.impl.Page.constructPage(Page.java:942)
at com.sap.ip.bi.webapplications.runtime.impl.Page.<init>(Page.java:761)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.createPage(Controller.java:511)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:972)
at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:864)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:488)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:22)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Helpful answers will be rewarded....
Thanks and Regards,
PankajSingle Sign On is optional.
What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
Cheers. -
Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
CustomerHi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey. -
SSRS report throwing error :- system.web.aspnethostingpermission failed
Hi,
I am facing an issue with SSRS report after implementing HTTPHandler in its web.config file of Report manager.
My reports were working fine. I deployed a dll in report manager BIN folder and added below tag in the web.config
<add verb="*" path="*.aspx" type="ISHandler.SyncHandler, ISHandler" />
ISHandler is the assembly/namespace and SyncHandler is the class name.
I am getting error when I try to access the report
error :- system.web.aspnethostingpermission failed.
Currently web.config contains below settings.
<securityPolicy>
<trustLevel name="RosettaMgr" policyFile="rsmgrpolicy.config" />
</securityPolicy>
<trust level="RosettaMgr" originUrl="" />
Can you please help where the security permission is missing ?
sanmayI am unable to see that. Please check.
sanmay -
Error instantiating web-application
Hello, Im new posting over here. I hope someone can help me with this problem.
I'm working on a WebService that use this type of variable:
byte[ ] file.
But when I try to run the WebService return this:
Error instantiating web-application
Error compiling :C:\Proyectos Modernizacion\Transitos_Produccion\TransitosMigracionOracle\ViewController\public_html: Syntax error in source or compilation failed in: C:\Herramientas Desarrollo\jdevstudio10140\jdev\system\oracle.j2ee.10.1.3.42.70\embedded-oc4j\application-deployments\current-workspace-app\TransitosMigracionOracle-ViewController-webapp\transitos\view\runtime\MsgTransitosSoapHttp_recepcionCierre_ReqS.java C:\Herramientas Desarrollo\jdevstudio10140\jdev\system\oracle.j2ee.10.1.3.42.70\embedded-oc4j\application-deployments\current-workspace-app\TransitosMigracionOracle-ViewController-webapp\transitos\view\runtime\WsRegistrarTransitosSoapHttp_Tie.java:264: error #300: method getString_1() not found in class transitos.view.GuardarImagenDocumentosElement
result = ((transitos.view.WsRegistrarTransitos) getTarget()).guardarImagenDocumentos(myGuardarImagenDocumentosElement.getString1(), myGuardarImagenDocumentosElement.getString_2(), myGuardarImagenDocumentosElement.getString_3(), myGuardarImagenDocumentosElement.getString_4(), myGuardarImagenDocumentosElement.getString_5(), myGuardarImagenDocumentosElement.getString_6(), myGuardarImagenDocumentosEl
*If delete the parameter byte[ ] file WebService works fine. Is a problem that I use byte type on WebService through JDeveloprt?. This because on JBuilder, this WebService works fine*
Thanks for help
Regards1) Application name has to be "default"
Change <web-app application="eleicoes" name="eleicoes-web" root="/eleicoes" />
to
<web-app application="default" name="eleicoes-web" root="/eleicoes" />
2) Also I recommend you to put the war file under the applications directory instead of default-web-app
Hope this helps
-Debu Panda
Oracle
I did exactly that Rob.
This is the files i am using:
application.xml
<orion-application autocreate-tables="true"
default-data-source="jdbc/OracleDS">
<web-module id="defaultWebApp" path="../default-web-app" />
<!-- this is the line i insert -->
<web-module id="eleicoes" path="../default-web-app/eleicoes/eleicoes-web.war" />
</orion-application>
default-web-site.xml
<web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
<default-web-app application="default" name="defaultWebApp" />
<!-- this is the line i insert -->
<web-app application="eleicoes" name="eleicoes-web" root="/eleicoes" />
</web-site>
Any advice?
Thanks for your time,
Rafael Dittberner -
Error reading Web application occurs when starting one server in the cluster
Hi All,
I have configured two cluster servers in the win 2000. Admin server also win
2000. One cluster server joins the cluster while other gives following error
and starts. But it seems that it does not join to the cluster view because
prevoius server only serves the requests. I have attached the log also.
<> <101062> <[HTTP synergyserver] Error reading Web application
"D:\bea\wlserver6.0\.\config\bd2kadmindomain\applications\.wl_temp_do_not_de
lete_synergyserver\wl_local_comp12863.war">
java.net.UnknownHostException: java.sun.com
at java.net.InetAddress.getAllByName0(InetAddress.java:571)
at java.net.InetAddress.getAllByName0(InetAddress.java:540)
at java.net.InetAddress.getAllByName(InetAddress.java:533)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:159)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:221)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:85)
at
weblogic.net.http.HttpURLConnection.getHttpClient(HttpURLConnection.java:109
at
weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:30
1)
at java.net.URL.openStream(URL.java:798)
at
weblogic.apache.xerces.readers.DefaultReaderFactory.createReader(DefaultRead
erFactory.java:149)
at
weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromExternal
Entity(DefaultEntityHandler.java:775)
at
weblogic.apache.xerces.readers.DefaultEntityHandler.startReadingFromExternal
Subset(DefaultEntityHandler.java:570)
at
weblogic.apache.xerces.framework.XMLDTDScanner.scanDoctypeDecl(XMLDTDScanner
.java:1131)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.scanDoctypeDecl(XMLDocum
entScanner.java:2177)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.access$0(XMLDocumentScan
ner.java:2133)
at
weblogic.apache.xerces.framework.XMLDocumentScanner$PrologDispatcher.dispatc
h(XMLDocumentScanner.java:882)
at
weblogic.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentSca
nner.java:380)
at weblogic.apache.xerces.framework.XMLParser.parse(XMLParser.java:900)
at
weblogic.apache.xerces.jaxp.DocumentBuilderImpl.parse(DocumentBuilderImpl.ja
va:123)
at
weblogic.servlet.internal.dd.DescriptorLoader.<init>(DescriptorLoader.java:1
78)
at weblogic.servlet.internal.HttpServer.loadWARContext(HttpServer.java:446)
at weblogic.servlet.internal.HttpServer.loadWebApp(HttpServer.java:404)
at weblogic.j2ee.WebAppComponent.deploy(WebAppComponent.java:74)
at weblogic.j2ee.Application.addComponent(Application.java:133)
at weblogic.j2ee.J2EEService.addDeployment(J2EEService.java:115)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:327)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:143)
at
weblogic.management.mbeans.custom.WebServer.addWebDeployment(WebServer.java:
76)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:562)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
48)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:285)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:439)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:180)
at $Proxy40.addWebDeployment(Unknown Source)
at
weblogic.management.configuration.WebServerMBean_CachingStub.addWebDeploymen
t(WebServerMBean_CachingStub.java:1012)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployment(DeploymentT
arget.java:313)
at
weblogic.management.mbeans.custom.DeploymentTarget.addDeployments(Deployment
Target.java:277)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateServerDeployments(D
eploymentTarget.java:232)
at
weblogic.management.mbeans.custom.DeploymentTarget.updateDeployments(Deploym
entTarget.java:192)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:562)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
48)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:285)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:439)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:180)
at $Proxy0.updateDeployments(Unknown Source)
at
weblogic.management.configuration.ServerMBean_CachingStub.updateDeployments(
ServerMBean_CachingStub.java:2299)
at
weblogic.management.mbeans.custom.ApplicationManager.startConfigManager(Appl
icationManager.java:240)
at
weblogic.management.mbeans.custom.ApplicationManager.start(ApplicationManage
r.java:122)
at java.lang.reflect.Method.invoke(Native Method)
at
weblogic.management.internal.DynamicMBeanImpl.invokeLocally(DynamicMBeanImpl
.java:562)
at
weblogic.management.internal.DynamicMBeanImpl.invoke(DynamicMBeanImpl.java:5
48)
at
weblogic.management.internal.ConfigurationMBeanImpl.invoke(ConfigurationMBea
nImpl.java:285)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1555)
at com.sun.management.jmx.MBeanServerImpl.invoke(MBeanServerImpl.java:1523)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:439)
at weblogic.management.internal.MBeanProxy.invoke(MBeanProxy.java:180)
at $Proxy9.start(Unknown Source)
at
weblogic.management.configuration.ApplicationManagerMBean_CachingStub.start(
ApplicationManagerMBean_CachingStub.java:435)
at weblogic.management.Admin.startApplicationManager(Admin.java:1033)
at weblogic.management.Admin.finish(Admin.java:493)
at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java:429)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:170)
at weblogic.Server.main(Server.java:35)
Each cluster servers domain names are different i.e. not "mydomain". The
file its complaining is in the specified directory and it has proper
priviledges.
If anyone has an idea please respond.
Thanks
Nalika
[synergyserver.log]
You're getting that probably because the WL instance was not shut down properly.
If that's the case, you'll need to remove an ldap lock file (with a .lok extension) in the directory of ldap files (under the server dir) . -
Error instantiating web-application:Application named 'javasso' is in stopp
Hi,
I am getting the following error while logging to Oracle Application Console.
"Error instantiating web-application:Application named 'javasso' is in stopped"
Environment details are as under:
SOA suite: 10.1.3.1
Oracle Database: 11.1.0
I started getting this error after doing the following steps. Earlier everything was working fine.
1. Created a connection pool and Datasource in JDBC resources under administration on 10g DB which worked fine.
2. Attempted creating a connection pool on 11g DB which said connectiion successful when testing connetion. But once finalised and then again tried testing it gave an error saying " Invalid user name/password ".
3. Since I know the username and password were correct, I tried changing 'ORCL' in the URL with the tns alias ORCL_421.
4. Since I changed the URL, i was prompted to restart the defaults.
5. Once I clicked on restart, after long time the browser still showed the timer rotating. So I refreshed the browser and it showed the application server was up.
6. I went to check the JDBC resources and all the CONNECTION POOLs and DataSources are vanished.
7. I logged out and then when i am trying to login again, I am getting the above error.
8. I tried launching ESB and got the similar error but this time for esb "Application named 'esb-dt' is in stopped state."
I am not sure why this is happening. AScontrol.log has the following error stack:
[EMUI_14_42_51_/console/logoff] ERROR em.console doGet.303 - java.lang.IllegalStateException: Response has already been committed
java.lang.IllegalStateException: Response has already been committed
at com.evermind.server.http.EvermindHttpServletResponse.resetBuffer(EvermindHttpServletResponse.java:1854)
at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:249)
at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:50)
at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:283)
at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
at oracle.sysman.emSDK.svlt.PageHandler.render(PageHandler.java:796)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:398)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283)
at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:297)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:436)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:619)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Appreciate if anyone can help resolve this issue.
Thanks and Regards
ATCheck your server.xml. You need a line like:<application auto-start="false" name="staging-load" path="c:\staging-load.ear"/>
-
Error generating Web service /BIC/CQZDS_WEB00001000 how to over come this?
HI,
Experts,
I have created Web service source system by taking: target system BI and source system XI.
After creation of Info objects i have created data source in RSA1 there will no error displayed while CHECK but while activating the data source it was displaying errors like:
1) Error generating Web service /BIC/CQZDS_WEB00001000
2) Error when activating DataSource ZDS_WEBSERVICE BIDCLNT100
what will be the reason for this error plezase provide me good idea or provide step by step web service scenarious.
Thank you,
Shabeer Ahmed.Hi
Web AS 6.40 you can create a Web Service Proxy directly in Transaction SE80. Create a new package and right click on it. Choose Create -> Enterprise service / Web service -> Proxy object. Now you can choose how you want to provide the WSDL Source.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2 -
Error Invoking Web Service Action: Status (500): null
Hi forum
I am getting an "Invoking Web Service Action: Status (500): null" error when invoking a web service action block . The BLS transaction used as a web service outputs a text string which I tested using an xacute query . while executing the transaction as a web service the tracer tells me that there is no output .
Best regards,
Antonio
I am using an xMII 11.5 installation .
[INFO ]: Execution Started At: 04:17:46
[DEBUG]: 00000.01600 Begin Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[DEBUG]: 00000.01600 Begin Sequence Sequence : ()
[DEBUG]: 00000.01600 Begin Action WebService_0 : ()
[ERROR]: Error Invoking Web Service Action: Status (500): null
[ERROR]: ACTION FAILED: End Action WebService_0 : ()
[DEBUG]: 00000.11000 Begin Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 Begin Action Tracer_0 : ()
[INFO ]:
[DEBUG]: 00000.11000 End Action Tracer_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence_0 : ()
[DEBUG]: 00000.11000 End Sequence Sequence : ()
[DEBUG]: 00000.11000 End Transaction 'TMP45B360D9-0E02-2CF7-C4B4-F3C0B41C29E0'
[INFO ]: Execution Completed At: 04:17:46 Elapsed Time was 94 mSJamie,
Yes Indeed, I was calling inside a web service action another BLS transaction . Now , I am using a call to the transaction using the runner . It worked fine .
Thanks, -
Invalid Security role-name error in Web Project
Hi All,
I have imported a J2EE application project built in JBOSS into NWDS 7.1.
While building the project i get the following error
<b>CHKJ3020E:Invalid Security role-name error: PEHNTAHO_ADMIN</b>
This error directs me to the following code in web.xml
<security-constraint>
<display-name>Default JSP Security Constraints</display-name>
<web-resource-collection>
<web-resource-name>Portlet Directory</web-resource-name>
<url-pattern>/jsp/*</url-pattern>
<http-method>GET</http-method>
<http-method>POST</http-method>
</web-resource-collection>
<auth-constraint>
<b><role-name>PEHNTAHO_ADMIN</role-name></b>
</auth-constraint>
<user-data-constraint>
<transport-guarantee>NONE</transport-guarantee>
</user-data-constraint>
</security-constraint>
<b>I have tried out the following things to resolve this issue :</b>
<b>1) Remove the role manually</b>(as suggested by various people in other J2EE forums), but then some other error came in to picture
<b>2)Then I added the following code in web.xml</b>
<security-role>
<role-name>PEHNTAHO_ADMIN</role-name>
</security-role>
Then the above mentioned build error gets resolved, but then I get the following error while deploying the application.
Dec 3, 2007 12:59:21 AM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Deploy Thread,5,main]] ERROR: Deploy Exception.An error occurred while deploying the deployment item 'sap.com_AnalyticsApp2EAR'.; nested exception is:
java.rmi.RemoteException: class com.sap.engine.services.dc.gd.DeliveryException: An error occurred during deployment of sdu id: sap.com_AnalyticsApp2EAR
sdu file path: D:\usr\sap\CE1\J01\j2ee\cluster\server0\temp\tcbldeploy_controller\archives\191\AnalyticsApp2EAR.ear
version status: HIGHER
deployment status: Admitted
description:
1. Error:
Cannot update application sap.com/AnalyticsApp2EAR. Reason: The application sap.com/AnalyticsApp2EAR will not be update, because its validation failed. Reason:
ERRORS:
Web Model Builder: com.sap.engine.frame.core.configuration.NameNotFoundException: The parameter/s in String "<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<!-- whole web.xml-->
</web-app>
" is/are not defined and could not be substituted., file: AnalyticsApp2.war#WEB-INF/web.xml, column 0, line 0, severity: error
WARNINGS:
Web Model Builder: Following tests could not be executed because of failed precondition test "Web Model Builder" : Implicit Constraints Test, JSF Application Test, Mapping Test, Web File Existence Test, Web Class Existence Test, Security Role Test, file: AnalyticsApp2.war, column -1, line -1, severity: warning
<b>3) I had also added the following code in web-j2ee-engine.xml</b>
<security-role-map>
<role-name>PEHNTAHO_ADMIN</role-name>
<server-role-name>all</server-role-name>
</security-role-map>
but still i get the same deployment error.
Please help me in resolving this problem.
Can anybody tell me the use of role "PEHNTAHO_ADMIN"?
Thanks and Regards,
SrutiHi Malathy,
Once the users are created in Authentication Provider, and once the roles are created in Weblogic Server, You just have to map users to roles in Jazn-data.xml.
Could you please let us know you created a roles named users in WLS ?
Thanks & Regards,
Murali.
============ -
How to resolve Unexpected End of file error in Web Crawling
how to resolve Unexpected End of file error in Web Crawling....
I am getting java.net.SocketException :Unexpected End of file error in Web Crawling.
How to get rid of this error.
Please help anybody ASAP.1. Handle this exception - not recommended since you will be creating an exception handling overhead unnecessarily.
2. Check for EOF using available() method in InputStream. It returns 0 if there are no bytes to read. -
#MULTIVALUE error in WEBI crosstab
Hello Experts,
I am using cross tab in a webi report and I get multivalue error in WEBI
When I select the table property "Avoid Duplicate row aggregation", I get the below result
As you can see, that in the first image, the Actual cost is calculated correctly, but the Quantity, is anot able to add up and gives multivalue error.
Please help resolve.
Thanks
ShilpaHi Shilpa,
You can use any context In or Foreach.
Ex. =Sum(<Revenue>) In <Year>
=Sum(<Revenue> In (<Region>,<City>,<Year>) In <Year>)
Use contexts with Aggregation functions like Sum, Count, Min, Max etc.
For better understanding of Calculation Context you can go through following document :
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp5_ffc_en.pdf
- Smart measures are the ones which have projection aggregate set as "Database Delegated" which in turn results measure to be calculated by the database itself.
To create a Smart measures you can use calculated key figure or restricted key figure.
In IDT we can achive it by applying projection for measure object.
Hope this will help....!!!
Regards,
Veer S. -
Error in "Web Preview" mode in Reports version 7.2.1
I get the following error in "Web Preview" mode in Reports. I am trying to select a member from dimension called "Entity" which has User POV property.
I also have other dimensions in the report with User POV but they all are working fine. I get the error only when trying to look up the above "Entity" dimension.
Any ideas?Sorry forgot to put the error message in the above post....
Error 500--Internal Server Error
com.hyperion.ap.APException: [1106] Error: Class component property name invalid[OrgByPeriod]
at com.hyperion.ap.adm.HssEnvironment.createException(HssEnvironment.java:240)
at com.hyperion.ap.adm.HssLeafObject.getPropertyInstance(HssLeafObject.java:560)
at com.hyperion.ap.adm.HssLeafObject.getPropertyValue(HssLeafObject.java:335)
at com.hyperion.ap.adm.HssLeafObject.getPropertyValue(HssLeafObject.java:314)
at com.hyperion.reporting.waa.HRWaaSdOrgByPeriodBean.initOrgByPeriod(Unknown Source)
at com.hyperion.reporting.waa.HRWaaSdObjectTabBean.setOrgByPeriodBeanSettings(Unknown Source)
at com.hyperion.reporting.waa.HRWaaPovBean.doForm(Unknown Source)
at com.hyperion.waa.web.core.WAABean.service(WAABean.java:1102)
at com.hyperion.waa.web.core.WAABean.doForm(WAABean.java:1267)
at com.hyperion.waa.web.core.WAAFormBean.doForm(WAAFormBean.java:101)
at com.hyperion.reporting.waa.HRWaaBaseFormBean.doForm(Unknown Source)
at com.hyperion.waa.web.core.WAABean.service(WAABean.java:1102)
at com.hyperion.waa.web.core.WAAPageBean.doForm(WAAPageBean.java:632)
at com.hyperion.waa.web.core.WAABean.service(WAABean.java:1102)
at com.hyperion.waa.web.core.WAAPageBean.service(WAAPageBean.java:583)
at com.hyperion.waa.web.core.WAAPageBean.doForm(WAAPageBean.java:251)
at com.hyperion.waa.web.core.WAAUseBeanDesignTag.startTag(WAAUseBeanDesignTag.java:347)
at com.hyperion.waa.web.core.WAATag.doStartTag(WAATag.java:340)
at jsp_servlet._jsp._waa._web._hr.__hrwaabase._jspService(__hrwaabase.java:1418)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:33)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:971)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:402)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:28)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at com.hyperion.reporting.webviewer.CompressionFilter.doFilter(Unknown Source)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:27)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6356)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3635)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170) -
Com.sap.connectivity.cs.extended.connectionserver error in webi
Hi
I am getting the below error in webi.
com.sap.connectivity.cs.extended.connectionserver error in webi while running the report.
Please let us know ASAP.We have raised SAP note for this and we got the solution.
Create new APS server and
add the following required services to the APS
"DSL Bridge Service"
"Adaptive Connectivity Service"
SAP Note for this
0001775372 Error csEx WIS 00000 when trying to create a web intelligence document
Regards
Gaurav Mang. -
Very urgent...Getting errors in web server proxy
Hi,
We have 5 Glassfish server to fullfil the Http requests and one sun web server proxy for load balancing.
But we are getting the following errors in web server proxy logs:
+1. service-http reports: HTTP7766: error reading response header (IO timeout error)+
+2. service-http reports: HTTP7766: error reading response header (Connection reset by peer)+
+3. set-origin-server reports: HTTP7751: server <ip-address>:<port> offline+
+4. set-origin-server reports: HTTP7751: server 10.76.177.88:8083 offline+
Please do let us know reason of the above errors and if we need to change any configuration settings.
We are working on a very critical project. Please reply ASAP.
Thanks and Regards,
Project TeamHey is that u r using connection pool.
Check for number of connection in the Oracle Server opened.
Check up number of connection persist both in oracle/java.
Is driver not crashed or jvm right.
Shyam
Maybe you are looking for
-
I have tried repeatedly to burn a back-up data DVD of a playlist. The burn cancels in the first song. I have culled through the playlist and removed anything purchased online or shifted over from another desktop on the same computer. None of the song
-
Dear All, I am in one strange problem. I have created one BDC program to upload. It gets uploaded and executed when I go through debugging ( I do not make any change while in debugging only do F5 and F6 and F8). But, when I run it directly It does n
-
Selecting a portion of the movie to darken using a continuous clip
I have a section of the video that I need to darken. But if I select that section and click inspector to darken it, it makes the whole video darken. Then when I split the clip and darken that section it works-but as soon as I join the clip it reverts
-
Cant Install itunes on my pc.
(win7, 2gb ram, 32bit). Whenever I run the setup it stops in between and gives a msg ''An error occured during the installtn of assmbly - Microsoft.VC80.CRT.Version = ''8.0 50727.4053'' ,type='' win32'', publickey Token=''1fc8b3b9a1e18e3b'',process o
-
FI Experts, I recently change the ABA # ( bank Key) our checks print fine, however when I send the file to the bank for ACH the file is empty. We are using payment method T CTX, I checked under FBZP and everythign seems to be fine also. Am I missing