Error in WF Customizing, Standard task TS00008267 does not exist

Hi Experts,
I need your help with the Workflow Customizing (SWU3). After doing the automatic customizing, I am getting an error "Workflow: No workflow definition found" when I try to start the Verification Workflow. So I decided to execute each component in SWU3 and I found out that when I execute "Classify Decision Task as General", (though it is checked/green), it says that "Object TS 00008267 does not exist".
I checked in tcode PFTC that the task is really missing in our Development server, though they exist in QA and production.
What should I do to get this fixed? I really don't have any idea. Should I apply a patch, install something, or create TS00008267? I can't find anything on the net that solves this problem.
Thanks in advance.
Regards,
DN

Hello Dexter,
I see you loked at the other tread which I just responded to. I have copied my reply below.
If you find that all tasks are missing and not just TS00008267 then it is most likely an authorisation issue. Run transaction
SU53 to see what authorisation objects your user is missing. It is related to Org Management authorisations.
If you have to transport it try transaction SE01 (Transport Organiser) it is possible to transport from system to system. Just click on Create button and then select 'Transport of copies'. Then just enter you target system and save. You can then add the
objects you wish to transport to your Target system.
Example:=============================
R3TR PDTS 00008267
In SE01, click Create => Transport of copies
=> Name the request and save
=> Click 'Include Objects' button and choose 'Freely selected
objects'.
=>Enter the Development class SWD and click 'Selected
Objects'. F4 at the bottom of the list (Under the DTEL
entry) and select the entry "R3TR PDTS" and click OK.
Now enter the task ID 00008267 in the dialog box
opposite it and click the checkbox (See attached screen
shot) and then click the Execute button.
=> Expland the list and goto the task
=> Select 00008267 and click the "Save In Request"
button.
You can do this with any standard tasks you want to transport to your system.
Hope this helps.
Regards,
Eddie

Similar Messages

  • Error in EA00 - EITR Billing Document No. does not exist

    Hi Experts,
    I am tryign to Final bill a moved out contract for the dates 16.05.2007 to 31.12.2008.
    The joint invoicing condition is 1. When I try to bill these billing documents through EA00 I am getting the Error "EITR <Billing Do. no.> A does not exist.
    Even when I try to confirm move out and Final Bill through Transaction EC56E I am getting the same error for all 3 contracts.
    The three billing documents for which I am getting the error have been already reversed and are not seen in EITR. They are seen in table ERCHC.
    Any idea why this error occurs? I added entries in table EITR manually for the 3 billing documents, then the error does not occur any more. But this doesnt seem to be a very acceptable solution.
    Let me know your insights on this one.
    Thanks and Regards,
    Prajakt Dhumal

    Thanks for your mail.
    I am trying to final bill a customer (03). The bill order is created successfully for the period which I am trying to bill. Also, when I am trying to bill the contract thru EA00, I am getting an error that u201CEITR <billing doc no> A Not foundu201D.
    The billing doc in the above error is of a different period (later that the Final Billing period) and has also been reversedu2026 I am not understanding why its referring to that Billing doc while billign a different period entirely
    Thanks and regards,
    Prajakt

  • ERROR: Cannot start mail services, configuration directory does not exist

    I'm running an Xserve G5 with one internal boot drive and one RAID using the other two internal drives. I used Apple's Disk Utility to set-up the RAID.
    Back in early December, I moved my mail database and mail store to the RAID. Ever since, when I restart the server, the mailaccess.log generates the following error:
    Jan 23 18:51:33 mail master[47]: ERROR: Cannot start mail services, configuration directory does not exist: /Volumes/RAID/mail.data/db
    I'm speculating this is a timing error that gets created when Postfix initially can't find the RAID. Then, it must try again and find it because the error message does not repeat and mail starts running.
    Is this something to worry about?

    Hi Joel,
    You're right, it's a timing issues. The mail system is ready for work before the file system is mounted. It's benign.
    Jeff

  • Error: ORA-16532: Data Guard broker configuration does not exist

    Hi there folks. Hope everyone is having a nice weekend.
    Anyways, we have a 10.2.0.4 rac primary and a 10.2.0.4 standby physical standby. We recently did a switchover and the dgbroker files automatically got created in the Oracle_home/dbs location of the primary. Now need to move these files to the common ASM DG. For this, I followd the steps from this doc:
    How To Move Dataguard Broker Configuration File On ASM Filesystem (Doc ID 839794.1)
    The only exception to this case is that I have to do this on a Primary and not a standby so I am disabling and enabling the Primary(and not standby as mentioned in below steps)
    To rename the broker configuration files in STANDBY to FRA/MYSTD/broker1.dat and FRA/MYSTD/broker2.dat, Follow the below steps
    1. Disable the standby database from within the broker configuration
    DGMGRL> disable database MYSTD;
    2. Stop the broker on the standby
    SQL> alter system set dg_broker_start = FALSE;
    3. Set the dg_broker_config_file1 & 2 parameters on the standby to the appropriate location required.
    SQL> alter system set dg_broker_config_file1 = '+FRA/MYSTD/broker1.dat';
    SQL> alter system set dg_broker_config_file2 = '+FRA/MYSTD/broker2.dat'
    4. Restart the broker on the standby
    SQL> alter system set dg_broker_start = TRUE
    5. From the primary, enable the standby
    DGMGRL> enable database MYSTD;
    6. Broker configuration files will be created in the new ASM location.
    I did so but when I try to enable the Primary back I get this:
    Error: ORA-16532: Data Guard broker configuration does not exist
    Configuration details cannot be determined by DGMGRL
    Form this link,(Errors setting up DataGuard Broker it would seem that I would need to recreate the configuration....Is that correct ? If yes then how come Metalink is missing this info of recreating the configuration... OR is it that that scenario wouldnt be applicable in my case ?
    Thanks for your help.

    Yes I can confirm from the gv$spparameter view that the changes are effective for all 3 instances. From the alert log the alter system didnt throw u pany errros. I didnt restart the instances though since I dont have the approvals yet. But I dont think thats required.

  • QM UD Error Message: Check table XEKBN: entry 45039875220001003 does not exist.

    Hello QM expert,
    I encounter a error when I make a UD. (Please refer to below screenshot. )
    Case 1: I did quantity post to unrestricted use, to scrap, to blocked stock, to new material, to reserves, return delivery. When I save this UD, there is a error message 'Check table XEKBN: entry 4503987522000100310100 does not exist.'  (PS. 4503987522 is PO number, but I don't know what it is about 10031010.)
    Case 2: I fill the same field like Case 1, but exclude to new material. It can be passed, no error message.
    Case 3: I only fill one field [to new material. It can be passed, no error message.
    Could you please give me some guidance? Thank you so much.
    Best Regards,
    Fanchao Bu

    Hi Fanchao,
    Form the inspection lot number range, I believe you are using GR form Purchase Order, right? Please confirm the below points -
    1. Is this a normal PO or Sub-contractor's PO?  Please confirm if this issue is happening for every stock posting like Unrestricted, Scrap, Blocked...? or just for one? Can you try one by one for example, move stock form QI => Unrestricted stock only (and do not combine all types together like the attached screenshot) and suggest if that is working.
    2. If this is a non-valuated material you have used (NLAG) for testing? Are you trying to post materials for previous period? Storage Location SM10 is valid?
    If still this issue exist, then potentially, there is some issue with valuation variant linked to valuation area, which is normally maintained in Configuration OPK9. Paralelly, you can request your ABAP team to check FM MB_UPDATE_VALUE_ENQUEUE_TABLE, Include LMBGBU04, as suggested by the below link -
    SAP ABAP Function Module MB_UPDATE_VALUE_ENQUEUE_TABLE - SAP Datasheet - The Best Run SAP Run SAPDatasheet
    You can also check SAP notes below, based on the business needs:
    1. 403671  - Error M7001: 'Please check table &...'
        401462  - Error M7001: 'Please check table &...'
        201833  - M7001: 'Please check table XEKPO: Entry & &...' 
        2072019  - Error M7001 raised during posting goods receipt
        407265  - Transfer parameter with BAPI BAPI_GOODSMVT_CANCEL (this may be linked to your return Delivery of 1 PC...)
        439945  - GR w/ freight costs for stock transport ordr w/ML currencies
        521090  - FAQ: Stock transfer to stock transport order
        867878  - Inconsistencies in the EKBE table because of conversions
        214814  - M7001/M7361: Table T156M, entry MAA7 2
        1584493  - Overdelivery check for GR blocked stock with GR-based IV
        102863  - GI f.delivery f.a stock transfer w.delivery costs
    2. 409529  - Price differences during goods receipt for purchase order
    3. 1528009  - MAA: incorrect distribution of goods receipt quantities
    4. 1569831  - MAA2: Composite SAP Note after Support Package SAPKH60504
    5. 406973  - M7001: Please check table XEBEFU: Entry does not exist
    6. 70577  - QA11: Error M7001 when posting qty in usage decision (OLD NOTE, May not be applicable)
    7. 824322  - QAC1: Incorrect batch in material document (Old Note, may no be applicable)
    Else, you can speak to MM team and/or FI team to help you better in this case, as I feel there is no much QM issues involved.
    Thanks,
    Arijit

  • Logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist

    Hi,
    Getting following error while trying to connect MySQL server to the MDM Import manager.
    logon Error:[DBNETLIB][ConnectionOpen(Connect()).]SQL Server does not exist or access denied
      i have supplied the following paramter values.
    Type : SQL server
    Remote System : MDM
    DBMS server : localhost 
    Database Name : testing
    user: < MySQL user name>
    password : < MySQL password>
    pls let me know how can i solve this problem.
    thanks

    Refer the blog
    /people/rupesh.kumar4/blog/2008/08/20/how-to-integrate-mdm-with-mysql-server-50
    thanks
    Rupesh

  • OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied

    Hi,
    I have one client and one server.  In both hosts I created an OS-user named User1.
    The user have been given various role under the prefix SQLServer2005.
    The default instance of SQL Server and instance (background-process) of
    Analysis Service are also run under User1.
    I connected via Management Studio to Analysis Service directly in the
    server.  I set the permission to access Analysis Service to Everyone. 
    This means everyone should be able to use Analysis Service.  I have set
    ODBC data source to the server.  Testing was successful.
    I created a project to create a cube.  The tables are fairly small (total 300 MB, biggest one 290).
    On project setting (created at client) I set the server host as
    deployment target. I managed to deploy project when all I have are Data
    Source and Data Source Views.
    But on deployment I always failed.   The errors remain the same, begins with
    OLE DB error: OLE DB or ODBC error: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.; 08001.
    I have tried 4 combinations of Impersonation :
    (A) Use a specific username and password
      * in which I supply User1 and the password of User1
    (B) Use the service account
    (C) Use the credentials of the current user
    (D) Default
    Why is this? The server does certainly exist.  I think the error message is wrong.
    I have seen 3 posting that seems related.  One of them say the solution is giving the right impersonation, but gave no detail.  About the privilege, User1 are granted the role of
    SQLServer2005MSOLAP.  What is the solution?
    Thank you,
    Bernaridho

    I just had this problem and solved it by creating an alias in SQL Server Configuration Manager, as below:
    Scenario: My SQL server is accessible from the internet under my.domain.com, and from itself at ServerName. But the local network can't see itself through the router at my.domain.com, so the deployed project is unable to process the cube, since that would
    require Analysis Services to be able to see the SQL Server at my.domain.com, which it can't do.
    So I changed the server in my project from my.domain.com to ServerName, and I created a local alias to ServerName in SQL Server Configuration Manager, under SQL Native Client 11.0 Configuration, Aliases. In my case, I pointed it to localhost port 1333, and
    used SSH -L 1333:my.domain.com:1433, but I could have pointed the alias directly to the server, just as well. (Verifying... yes, that worked too, so you can forget SSH if you have no interest in it.)

  • Error in CMC : The 0 plug-in does not exist in the CMS (FWM 02017)

    Hello,
    We have just installed a BO4 environment and migrated our legacy XIR2 environment (users, groups, universe, reports....).
    I want now to modify some user/group securities on a folder. When I press the Assign Security button, the following error is displayed : The 0 plug-in does not exist in the CMS (FWM 02017)
    Does anybody know about this problem ?
    Thank you.

    Hello,
    It was good practice to redo the security when migrating from XIR2 to XI3.1.
    So if you migrate from XIR2 to BI4, I think it might be a good idea to do it also.
    Try first to see if you have the same issue by recreating a new group.
    If it works fine, then you should use this new one.
    Regards,
    Philippe

  • ORACLE error 959 encountered ORA-00959: tablespace 'xyz' does not exist

    im importing a dump to a newly created BD and im using 11g. I have already tablespaces and user for the dump to be imported.
    The problems is, i have a total of 5 tablespaces created, all 4 are working well except the one tablespace and im receiving a 959 error(IMP-00003: ORACLE error 959 encountered
    ORA-00959: tablespace 'xyz' does not exist). The log mentions that the tablespace does not exist even if this tablespace exist in the list of tablespace and datafiles created.
    Hope you could help me with this. Thanks
    Edited by: user8667617 on Feb 18, 2010 11:06 PM

    SQL> Select name from v$datafile;
    NAME
    C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSTEM01.DBF
    C:\APP\ORACLEADMIN\ORADATA\ORC11\SYSAUX01.DBF
    F:\ORC11DBUNDO\UNDOTBS01.DBF
    E:\ORC11DBUSER\USERS01.DBF
    E:\ORC11DBUSER\INT_TRANSACTIONS_DATA.DBF
    E:\ORC11DBUSER\INT_DATA.DBF
    E:\ORC11DBUSER\CAS_DATA.DBF
    E:\ORC11DBUSER\COS_DATA.DBF
    E:\ORC11DBUSER\INT_ONLINE_TRANSACTIONS_DATA.DBF
    9 rows selected.
    SQL> Select * from v$tablespace;
    TS# NAME INC BIG FLA ENC
    0 SYSTEM YES NO YES
    1 SYSAUX YES NO YES
    2 UNDOTBS1 YES NO YES
    4 USERS YES NO YES
    3 TEMP NO NO YES
    6 INT_TRANSACTIONS_DATA YES NO YES
    7 INT_DATA YES NO YES
    8 CAS_DATA YES NO YES
    9 COS_DATA YES NO YES
    10 INT_ONLINE_TRANSACTIONS_DATA YES NO YES
    10 rows selected.
    SQL>
    here are the result of my query and it seems that the tablespace is recognized by the DB.
    is there still any reason why? also when i try to drop the said tablespace in getting a response of the "tablespace does not exist" but when i try to create the tablespace it says that "ORA-00604: error occurred at recursive SQL level 1
    ORA-00001: unique constraint (SYS.I_TS1) violated"
    hope you can help me with this.

  • Error "Processing routine ENTRY in program ztest does not exist"

    Hi All ,
               I facing problem in Samrt form  driver program
            Error "Processing routine ENTRY in program ztest does not exist"
             when i given print through T.Code Me22n
             Can you suggest  me why i facing this problem.........
      This is below my driver program code:
    Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
    Edited by: Rob Burbank on Mar 10, 2010 9:53 AM

    Hi nIck,
             I  write the code this way
              can you suggest me any changes are require
      FORM ENTRY USING RETURN_CODE TYPE I US_SCREEN TYPE C.
      PERFORM DATA_FETCH.
      PERFORM DATA_PROCESS.
      PERFORM CALL_FORM.
    ENDFORM.                    "entry
    *&      Form  data_fetch
          text
    FORM DATA_FETCH.
      PONUMBER = NAST-OBJKY.
    ENDFORM.                    "data_fetch
    Regards
    Raju
    Edited by: raju mahapatra on Mar 11, 2010 7:23 AM

  • My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

    My Adobe Reader XI 11.0.09 fails to open pdf's. Error message - "because the associated helper application does not exist." Can anyone help me?

    Okay. I will try this again. I did remove and reinstall earlier, but will
    do it now.
    regards, Mike
    On Wed, Oct 15, 2014 at 12:55 PM, Sabian Zildjian <[email protected]>

  • Process chain failure SQL ERROR 942 ORA-00942:table or view does not exist

    HI all,
    We have a proces chain with 'ceate index' process type and got failed with an error as follows......
    SQL ERROR 942 ORA-00942:table or view does not exist
    Plz can anyone give solution for this error.
    SATISH.

    Hey Satish,
    Please refer to this thread:
    BRCONNECT fails with SQL error -942 at location ora_vers_get-1
    I am sure the solution there should solve your problem. There are various other discussions about this error in the forum, I suggest you look through them for better understanding and additional material.
    Cheers!!!
    Manu.

  • Number range not update CIN error message Excise group.... does not exist

    Hi Guru,
    We have created new excise group in SPRO> tax on goods movement/India>basic setting>maintain excise group successfully.
    My problem is, when we have update the number range (J1I9) for  same excise group, system give the error message Excise group .... does not exist.
    Please help on top priority.
    Regards
    BK GAIKWAD

    Sir,
    i have allready updated the same & also one thing is more, i have aal the above chnages in development server & then transport the same request to quality server.
    in development server it is work fine only in quality server it is not display. please help
    Regards
    BK GAIKWD

  • Error: While Opening a Custom view- Action &OBJECT_ID& does not exist

    Hi Experts,
    On the click of button, I am creating a window and opening as follows:
      wd_comp_controller->go_window         = lo_window_manager->create_window(
                          window_name            = 'ZW_CERTIFICATION_POP'
                          title                  = lv_pop_title
                          close_in_any_case      = abap_false
                          message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                          close_button           = abap_true
                          button_kind            = if_wd_window=>co_buttons_okcancel
                          message_type           = if_wd_window=>co_msg_type_none
    I have written following code in INIT method of View to Subscribe events but it is dumping with the Error "Action &OBJECT_ID& does not exist ".
    DATA lv_ok     type string.
    DATA lv_cancel type string.
    DATA lo_popup  TYPE REF TO if_wd_window.
    DATA lo_view   TYPE REF TO if_wd_view_controller.
    DATA lo_window_ctlr type ref to if_wd_window_controller.
    register button events
        lo_view = wd_this->wd_get_api( ).
        lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
        wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
        lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
        wd_comp_controller->go_window->subscribe_to_button_event(
                       button            = if_wd_window=>co_button_ok
                       button_text       = lv_ok
                       action_name       = 'OK'
                       action_view       = lo_view
                       is_default_button = abap_true
        lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
                   wd_comp_controller->go_window->subscribe_to_button_event(
                      button            = if_wd_window=>co_button_cancel
                      button_text       = lv_cancel
                      action_name       = 'CANCEL'
                      action_view       = lo_view
                      is_default_button = abap_true
    How to solve this exception causing application to dump.
    Thanks
    Depesh

    Hi Depeshn,
    I have written following code in INIT method of View
    I think you have writen code containg subscribe_to_button_event method in the INIT method of the pop up view. But actually you should write that code where you are generating the pop up window. i.e in the ONACTION method of the button (which when clicked generates the pop up window.)
    It should be something like this:
    " This whole code should come in the event handler of the button.
    wd_comp_controller->go_window = lo_window_manager->create_window(
    window_name = 'ZW_CERTIFICATION_POP'
    title = lv_pop_title
    close_in_any_case = abap_false
    message_display_mode = if_wd_window=>co_msg_display_mode_selected
    close_button = abap_true
    button_kind = if_wd_window=>co_buttons_okcancel
    message_type = if_wd_window=>co_msg_type_none
    DATA lv_ok type string.
    DATA lv_cancel type string.
    DATA lo_popup TYPE REF TO if_wd_window.
    DATA lo_view TYPE REF TO if_wd_view_controller.
    DATA lo_window_ctlr type ref to if_wd_window_controller.
    * register button events
    lo_view = wd_this->wd_get_api( ).
    lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
    wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
    lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
    wd_comp_controller->go_window->subscribe_to_button_event(
    button = if_wd_window=>co_button_ok
    button_text = lv_ok
    action_name = 'OK'
    action_view = lo_view
    is_default_button = abap_true
    lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
    wd_comp_controller->go_window->subscribe_to_button_event(
    button = if_wd_window=>co_button_cancel
    button_text = lv_cancel
    action_name = 'CANCEL'
    action_view = lo_view
    is_default_button = abap_true
    I hope it helps.
    Regards
    Arjun

  • Data acquisition: task specified does not exist

    I am trying to do an analog read.   Apparently in the original code (which I did not write), the data acquisiton is a multithreaded task. (I am not a real programmer, so know next to nothing about multithreading, and not a whole lot about programming)...
    When I tried to collect data (by pressing our "Data Collect" button on the GUI, I got an error along the lines of:
    "Task specified is invalid or does not exist. Status Code: -200088"
    I have figured out that the task the error refers to is called SetCollectData, for which I am not able to find a definition.
    It runs fine when I comment that line out, but of course, no data gets collected!
    Here is the actual data acquisition portion of the code:
    if(DAQInputTask && ) GetCollectData())
                    if((AiData = malloc(sampsPerChan*AiNumChannels*sizeof(float64))) == NULL )
                        MessagePopup("Error","Not enough memory");
                        goto Error;
                    DAQmxErrChk(DAQmxReadAnalogF64(DAQInputTask,-1,0,DAQmx_Val_GroupByScanNumber,AiData,sampsPerChan*AiNumChannels,&numRead,NULL));
                    fwrite (AiData, sizeof(float64), sampsPerChan*AiNumChannels, AiRawData);
           *AiData = NULL;
    Any ideas?
    I have switched to NIDAQmx drivers, and have had a host of problems since switching to DAQmx functions.  So, this new problem may still be related. 
    Thanks!

    Tasks in CVI are the basic of data acquisition: every operation is run under a task which groups channel definition, triggers, acquisition rate and almost every other element which constitues an acquisition process.
    You should try to find informations about the tasks used in your project, possibly asking the original programmer; on the same time, you should learn some infos about how daqmx treats data acquisition process. Here you can find the help page related to tasks: I suggest you read that page and use it as a starting point for your search. Keep in mind that a task can be defined either inside the program or within MAX. One possible cause for not finding the task while running the program is that is has been defined in MAX on one machine and you have moved the project to another one without moving MAX informations too from the original PC, but this is only a guess.
    It's not clear from your words whether you are modifying an existing project developed in DAQMx from the beginning or you are moving an old NI-DAQ project to DAQMx. These are very different scenarios. In every case you should see the exact line where the error arises, look for the task handle used in that line (e.g. 'DAQInputTask' in the code you posted) and find the line where the task is loaded/created (ultimately try a search for that variable name in all your source files and examine each line where it si used).
    Proud to use LW/CVI from 3.1 on.
    My contributions to the Developer Zone Community
    If I have helped you, why not giving me a kudos?

Maybe you are looking for