Error in while Executing Query in the Query Designer

Hi,
I  created info Set based two  info object and  three Data Store Objects. and join condition is Left Outer Join.
there are Business Partner info object, CRM  BP Sales View Info Object and Data Store Objects are  BP: Roles (0BP_ROLE),Partner: Industries(0BP_IS),CRM Marketing Attributes for Business Partner(0ATR_DS01)
I given some Selection Parameters while executing query in the Query Designer. in That i given city is selection parameters
and i creted variable for this info object.
it gives the Error Messages
Beim Lesen der Daten sind Fehler aufgetreten. Navigation ist möglich
Der Wert "New Delhi " von Merkmal 0CITY40 enthält an der 10.ten Stelle einen Fehler
it is very urgent , can any one help me regarding this.

Hi Reddy,
The Error message in english is this
While reading the data mistakes have appeared. Navigation is possible
The value " New of Delhi " from sign 0CITY40 contains a mistake at the 10.ten place
and i think you need to run the change run and run the report with out selecting the variable option.and navigate in the report by filtering the report for your requirement.
Try this and let me know.
Thanks,
RK

Similar Messages

  • No auth error while executing BI integrated planning Query

    Hi to all,
    I have created integrated planning Query in Bex Query designer.
    But while executing BI integrated planning query in portal, its giving errror.
    1.     No authorization for query "IP"
    2.     You are not authorized to edit this aggregation level CUBE_IP
    3.     Cannot load query u201CIPu201D (data provider u201CDP_1u201D: No authorization for requested service)
    Can any one tell me the solution for that.
    Regards
    Pavneet Rana

    Hi.
    For to check the authorization errors, you have to use the transaction  ST01 (System Trace) The Steps are:
    ST01 -->  Trace ON  --> In Trace Components, active "Authorization Check" --> Execute the query with the user --> Trace Off > Analysis> In User Name, put the user that execute the query --> F8
    You can see the authorization errors  in Dark Green.
    Regards !!!

  • ODBC error occurred while executing SQLExtendedFetch to retrieve the result

    Good morning everyone,
    I had the following error message while trying to run a simple query in Answers with 3 dimensional columns, 1 fact, and 4 calculated facts...
    "State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1001 code: 0 message: [Oracle][ODBC]Memory allocation error.. [nQSError: 16011] ODBC error occurred while executing SQLExtendedFetch to retrieve the results of a SQL statement. (HY000)
    It's taking around 2,5 minutes to run, then it give that error message.
    Has anyone got any ideas on where I should get started?
    Update: after 2nd time - it's running fine....I've added a filter...could this be the issue? Too many rows initially?

    Damon,
    you were correct - it was indeed an ODBC issue. Switching to OCI has fixed the issue. This link was also very helpful:
    regarding performance
    In my case, the problem with OCI happened because I was using System DSN name instead of how it's called in tnsnames.

  • An error occurred while executing batch. Error message is: There is not enough space on the disk.

    Hello all,
    I execute a T-SQL query, which will retrieve large amount of data, however, I get an error message after a few seconde.
    The error message is :
    An error occurred while executing batch. Error message is: There is not enough space on the disk.
    Who can tell me the reason and waht's the steps to solve this issue ?
    Really thanks.
    Thanks, Jed deng

    The other two posters suggested that the problem with tempdb or you data/log files. This is not the case here. The error message relates to the client-side of things. Apparently SSMS needs to store data on disk. I don't recall exactly when this happens,
    but I seem to recall that the files appear in you %TEMP% directory.
    I would suggest that your correct action is to clean up the disk. Not the least there may be a lot of junk in your %TEMP% and %TMP% directories.
    Erland Sommarskog, SQL Server MVP, [email protected]
    Thanks Erland, I was not aware of this earlier. Now, I am able to find out one of the resons for slowness of SSMS gird. Also, I have just checked it with process monitor, SSMS is creating tmp%.tmp files..
    - Chintak (My Blog)

  • An unknown error occurred while executing the PowerShell script:

    Hello all,
    Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
    Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
    When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
    to exit and go back into VMM in order to get anything else to run.
    The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
    An unknown error occurred while executing the PowerShell script:
    The connection to the VMM management server scvmm2.mmmmmm.com was lost.
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Try the operation again. If the issue persists, contact Microsoft Help and Support.
    ID: 27235
    This is what I get in Events
    Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
    Log Name:      Microsoft-Windows-PowerShell/Operational
    Source:        Microsoft-Windows-PowerShell
    Date:          4/9/2015 3:27:04 PM
    Event ID:      4100
    Task Category: Executing Pipeline
    Level:         Warning
    Keywords:      None
    User:          mmmmmm\paufra
    Computer:      tools-francis.mmmmmm.com
    Description:
    Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Context:
            Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    User Data:
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
        <EventID>4100</EventID>
        <Version>1</Version>
        <Level>3</Level>
        <Task>106</Task>
        <Opcode>19</Opcode>
        <Keywords>0x0</Keywords>
        <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
        <EventRecordID>285</EventRecordID>
        <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
        <Execution ProcessID="2344" ThreadID="4076" />
        <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
        <Computer>tools-francis.mmmmmm.com</Computer>
        <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
      </System>
      <EventData>
        <Data Name="ContextInfo">        Severity = Warning
            Host Name = Default Host
            Host Version = 4.0
            Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
            Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
            Engine Version = 4.0
            Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
            Pipeline ID = 16
            Command Name = Get-SCReplicationGroup
            Command Type = Cmdlet
            Script Name =
            Command Path =
            Sequence Number = 91
            User = mmmmmm\paufra
            Shell ID = Microsoft.PowerShell
    </Data>
        <Data Name="UserData">
        </Data>
        <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
    Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
    on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
    Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
    service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
    </Data>
      </EventData>
    </Event>

    Hi Sir,
    First , please try to run the VMM configuration analyzer on that computer :
    http://www.microsoft.com/en-us/download/details.aspx?id=41555
    In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
    http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Receiving the error message while executing the Real Time DTP

    Hi,
    I am receiving the error message while executing the Real time DTP for Billing data.
    Error Message - Record filtered in advance as error records with the same key exist     RSM2     722
    When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
    Diagnosis
    The existing DTP requires a serialized update because fields are updated
    non-commutatively during the processing run (for example, MOVE).
    Therefore all new data records that have the same semantic key as
    incorrect records that have not yet been corrected in earlier requests
    or earlier data packages of the same request, are filtered out after the
    extraction in a special step. In this way the system ensures that
    incorrect data records are not repeated for your changes, which may not
    contain errors themselves.
    System Response
    The data record is not updated but is written to an error stack.
    Procedure
    Procedure
    Correct all incorrect data records and update them using an error DTP.
    Procedure for System Administration
    I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
    Regards,
    Ram

    Hi Arvindh,
    Its  write optimized DSO.. there is no option to generate SIDs.
    Hi Kiran,
    I checked the link u sent me. Here the main issue is..The function module is standard  and its not allowing me  to do enhancement  point..
    Any idea in using Badi's??
    Thanks all...

  • "Error #2032" while trying to import BEx query through SAP Netweaver BW connection in Dasboard

    Hi Team,
    BO server version: 4.1 SP3 Edge edition
    Dasboard Version: 4.1 SP3
    BI Version: NW 7.4 SP7 (ABAP only)
    We are getting Error #2032 while trying to import BEx query through SAP
    Netweaver BW connection in dasboard Xcelsius.
    Please suggest to sovle this error.
    Regards,
    Vinay Shrimali

    There are several notes about this error - please see http://service.sap.com/sap/support/notes/1856691
    http://service.sap.com/sap/support/notes/1801130

  • Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine

    Hi All,
    I developed a Biztalk Application aims to upload a flat file data to our system MS SQL Server database. It works fine until one day, an exception is generated as below.
    "Error encountered while executing the transform project name.map name. Error:Unable to create the transform. Microsoft.XLANGs.Engine"
    It continues to generate an exception until I restart the Biztalk instance. And it happens occasionally, no pattern, cannot be traced and debugged.
    Anybody has an idea about this error? Please help, thank you very much.
    The Biztalk Server is running on Hyper-V Virtual machine, Biztalk Server 2009 on Windows Server 2008.
    The Biztalk Application consists of Mapping Functoid, Orchestration, Flatfile Schema, Flatfile Disassembler Pipeline, SQL Send Port, File Receive Port and Send Port
    Eric

    HI Eric,
    I think it might happen because of large message (Out of Memory exception). As you said you have flat file as inbound, you are doing mapping and then sending it to MSSQL
    SO you can check below mentioned things
    1) Any custom pipeline component is used in receive pipeline. (if so optimize the code)
    2) This issue haapen only with large message (BizTalk convert flat file to XMl to if you have 1MB file corresponding XML will be of higher size)
    again all thing mentioned above is assumption.
    YOu can use debugdiag tool to see if memory leak is happening
    http://www.microsoft.com/en-in/download/details.aspx?id=26798

  • Error encountered while executing the transform

    My message failed at orchestration with the following error. Kindly help in finding the issue.
    xlang/s engine event log entry: Uncaught exception (see the 'inner exception' below) has suspended an instance of service 'Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload(df91e55f-c6aa-914d-f042-acdb45bdcaf4)'.
    The service instance will remain suspended until administratively resumed or terminated.
    If resumed the instance will continue from its last persisted state and may re-throw the same unexpected exception.
    InstanceId: cc8fac84-47dc-4d31-be15-80c9f86ffaac
    Shape name: CodecoMapping
    ShapeId: 32b0a92d-82f7-4b3a-8e22-a94b53bf2804
    Exception thrown from: segment 1, progress 22
    Inner exception: Error encountered while executing the transform Ibox.UNEDIFACT.CODECO.Orchestration.CodecoMap. Error:Transformation failed..
    Exception type: XTransformationFailureException
    Source: Microsoft.XLANGs.Engine
    Target Site: Void ApplyInMemoryTransform(System.Type, Microsoft.XLANGs.RuntimeTypes.TransformMetaData, System.Object[], System.IO.Stream[])
    The following is a stack trace that identifies the location where the exception occured
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
       at Microsoft.XLANGs.Core.Service.ApplyTransform(Type mapRef, Object[] outParams, Object[] inParams)
       at Ibox.UNEDIFACT.CODECO.Orchestration.CodecoDownload.segment1(StopConditions stopOn)
       at Microsoft.XLANGs.Core.SegmentScheduler.RunASegment(Segment s, StopConditions stopCond, Exception& exp)
    Additional error information:
            Exception has been thrown by the target of an invocation.
    Exception type: TargetInvocationException
    Source: mscorlib
    Target Site: System.Object InvokeMethod(System.Object, System.Object[], System.Signature, Boolean)
    The following is a stack trace that identifies the location where the exception occured
       at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
       at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
       at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver resolver)
       at Microsoft.XLANGs.BaseTypes.CompiledXsltWrapperTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, Stream output, XmlResolver resolver)
       at Microsoft.XLANGs.Core.Service.ApplyInMemoryTransform(Type mapRef, TransformMetaData trfMetaData, Object[] outParams, Stream[] inStreams)
    Additional error information:
            Attribute and namespace nodes cannot be added to the parent element after a text, comment, pi, or sub-element node has already been added.
    Exception type: XslTransformException
    Source: System.Data.SqlXml
    Target Site: Void ThrowInvalidStateError(System.Xml.XPath.XPathNodeType)
    The following is a stack trace that identifies the location where the exception occured
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ThrowInvalidStateError(XPathNodeType constructorType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.ConstructInEnumAttrs(XPathNodeType rootType)
       at System.Xml.Xsl.Runtime.XmlQueryOutput.WriteStartAttribute(String prefix, String localName, String ns)
       at <xsl:template name="compiler:generated"> (36)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current, Double {http://schemas.microsoft.com/BizTalk/2003/var}var:v237,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v239, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v240, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v242, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v244,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v246, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v248, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v250, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v252,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v255, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v256, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v258, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v259,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v261, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v262, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v264, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v265,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v267, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v268, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v271, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v272,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v281, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v283, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v284, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v286,
    Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v287, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v289, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v290, Boolean {http://schemas.microsoft.com/BizTalk/2003/var}var:v292,
    String {http://schemas.microsoft.com/BizTalk/2003/var}var:v295)
       at <xsl:template name="compiler:generated"> (12)(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/s2:Root">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at <xsl:template match="/">(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime, XPathNavigator {urn:schemas-microsoft-com:xslt-debug}current)
       at Root(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at Execute(XmlQueryRuntime {urn:schemas-microsoft-com:xslt-debug}runtime)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlSequenceWriter results)
       at System.Xml.Xsl.XmlILCommand.Execute(Object defaultDocument, XmlResolver dataSources, XsltArgumentList argumentList, XmlWriter writer)
       at System.Xml.Xsl.XslCompiledTransform.Transform(IXPathNavigable input, XsltArgumentList arguments, XmlWriter results, XmlResolver documentResolver)

    Hi,
    It is clearly an issue in your map. You can test your map out of Orchestration to make sure it is working.
    "Exception has been thrown by the target of an invocation" is a very generic exception. you
    need the inner exception to see the actual error. You can also try to test the map in the MapTester tool. It also shows also the inner exception. It's designed for BizTalk 2010 but with the .exe file you maybe also can test BizTalk 2006 maps,.
    http://code.msdn.microsoft.com/Execute-a-BizTalk-map-from-26166441
    If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

  • When I send mail, I keep getting this message. An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al

    When I send mail, I keep getting this message.
    An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
    [71.12.190.31]:52956 is in an RBL, see
    http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
    How do I get rid of this problem?
    WNS

    Hi there,
    If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
    Your TB is (my guess) setup to send the message directly to the recipient.
    As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
    Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
    /Frans

  • An error occurred while attempting to update the database

    Hi
    the update from 2.82 to 2.9.0 fails for me with following message
    An error occurred while attempting to update the database.
    the update log ends like this
    [Microsoft][ODBC SQL Server Driver][SQL Server]DELETE failed because the
    following SET options have incorrect settings: 'QUOTED_IDENTIFIER'. Verify
    that SET options are correct for use with indexed views and/or indexes on
    computed columns and/or filtered indexes and/or query notifications and/or XML
    data type methods and/or spatial index operations.
    1> 2> 3> [16:56:20] RunShellCommand: Command: osql exited with code: 1
    [16:56:20] RunShellCommand: Exit code indicates failure.
    [16:56:20] UpdateDatabase: Failed to run database update script.
    hope that anyone can solv this for me

    It seems that my problem is with one of ldapservers.
    When the periodic update runs.
    then there will be error periodic update failed
    log file mdm_error looks like this
    [00:01:46] Failed running query:
    IF NOT EXISTS(SELECT LDAPContainerName FROM LDAPContainers WHERE LDAPContainerName=? AND LDAPServerSAKey = ?)
    BEGIN INSERT INTO LDAPContainers(LDAPContainerName, DisplayName, LDAPContainerType, ParentContainerSAKey,
    LDAPServerSAKey, LDAPMemberType, AllowHandsOffEnrollment) VALUES (?,?, 2,
    (SELECT LDAPContainerSAKey FROM LDAPContainers WHERE LDAPContainerName =? AND LDAPServerSAKey =?) , ?, 1, 1) END
    SQLError:
    I think this is the reason that the upgrade fails.
    How can i solve this?

  • Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

    Error:
    Configure Portal Setup
    An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    Errors in the Log:
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
    CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
    I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
    Any ideas?
    David Baur

    I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
    David Baur

  • [0098]SQL*Plus encountered oracle error 100 while executing SQL Statement

    Hi,
    i'm trying to delete duplicate records from a table and running following script. this script is triggered from a unix script. it successfully deletes the records but in the last throws following error message,
    :[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement:2:Investigation required:
    can anybody please help? below is the script.
    DECLARE
    --CURSOR FOR DUPLICATE ROWS
    CURSOR CUR_DUPLICATE_ROWS IS
    Select RMS_NOTE_ID, RMS_SUMMARY_NOTE_ID, count(*) cnt from PARTY_NOTE
    group by RMS_NOTE_ID,RMS_SUMMARY_NOTE_ID having count(*) > 1;
    var_date PARTY_NOTE.PARTY_NOTE_CREATED_DATE%TYPE;
    BEGIN
    FOR DUPLICATE_ROWS_REC IN CUR_DUPLICATE_ROWS
    LOOP
    delete from party_note
    where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID
    and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID
    and rowid not in (select max(rowid) from party_note
    where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID);
    commit;
    END LOOP;
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    NULL;
    WHEN OTHERS THEN
    DBMS_OUTPUT.PUT_LINE(SQLERRM);
    ROLLBACK;
    END;

    Try this:
    delete party_note
    where  rowid not in (select max(rowid)
                         from   party_note
                         group  by rms_note_id, rms_summary_note_id
    commit;No need for cursors and loops.
    And when that's completed, consider ALTERing the table to add a unique index (or even a primary key) so you'll never need to do this again.

  • SCSM2012 Beta installation problem: An error occurred while executing a custom action:_PopulateUserRoles

    I'm installing the SCSM2012 Management Server
    component on a SQL dev box.  During the installation, the very last step (Import Management Packs) fails with this error:
    An error occurred while executing a custom action:_PopulateUserRoles
    This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
    I've already verified that the account I'm logged in with has SA access to the SQL database.  Windows 2008 R2 firewall is turned off.....
    Has anybody else run into this problem?

    I don't see anything indicative in the setup log.  The setup seems to get all the way to the part where it installs the management packs.  Then right after that is when the installation fails and it rolls back.
    From the setup log, towards the end:
    Property(S): ACTIONSUSER = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN = NT AUTHORITY
    Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
    Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
    Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
    Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
    Property(S): ProductToBeRegistered = 1
    MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
    MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
    MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
    1603.
    MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
    MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
    MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
    MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
    === Logging stopped: 11/7/2011  17:33:22 ===
    MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
    MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
    MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
    MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
    MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
    === Verbose logging stopped: 11/7/2011  17:33:23 ===

  • XL reporter error occurred while executing report! Rows: 25203 Columns: 30

    An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
    One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

    Hello  pls
    follow below procedure
    start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
    regards
    Jenny

Maybe you are looking for

  • How to get bar graph in word in labwindow/CVI ?

    how to get bar graph in word in labwindow/CVI ?

  • Thunderbolt to VGA adapter in bootcamp only 640x480?

    Just a few weeks ago I purchased a new MBP Retina for my new work laptop. I contantly go from Windows, to OS X to demo hardware to customers. Problem I am having, is that as soon as I connect the Thunderbolt to VGA adapter in Bootcamp on Windows7, it

  • Pages error Message!  "Pages Unexpectedly Quit while trying to open...."

    My wife just created a beautiful newsletter in Pages. She went to print it off last night and closed the document while it was printing and when she went to reopen it she got the error message. I've tried the suggestions in this fourm (p.list file tr

  • Korean characters appear as boxes

    Hi, recently I re-installed Windows 7 due to technical issues. Until now, I have been able to read Korean on Firefox, but for some reason, now Korean characters show up as boxes. I've gone through other forums and follows all the instructions dealing

  • Convert to SRGB?

    I recently had some issues with my photos looking terrible and drab on Windows web browsers. The solution turned out to be to convert my photos to the sRGB color profile before posting them to the Web. I can do that in Photoshop Elements, but it's a