Error in windows scheduler
Hi,
I have a report scheduled to run every day through windows scheduler.But since last two days it is showing up the error
Exception Index was outside the bounds of the array. occurred
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at Broadcast.Broadcast.Main()
I am not able to understand what the error is and how to deal with.Can some one help me on this.
Thanks,
Dhari
Hi,
Can you please check these Notes: 1415747 & 1469891
Thanks,
Michael
Similar Messages
-
How can I create a windows scheduler for shutdown my system in network?
Hello.
I want to create a windows scheduler for shutdown my system in a specific time but it can't let me to create it. I used below link to create a task but when I click on Finish it show me an error about permission. I used administrator account too but
got same error.
http://www.wikihow.com/Automatically-Shut-Down-Your-Computer-at-a-Specified-Time
Thank you.Hello,
Can you try opening Task Scheduler as Administrator :
Right-click on "Task Scheduler" shortcut and select "Run as administrator
Regards,
Régis -
I am trying to install itunes on my computer (Windows Vista). After initial instillation I got an error 42404 A required itunes componenet is not installed; please repair or re-intall itunes and error 50, cannot access itunes store at this time. Please try later. I have done that multiple times; uninstalled all components, reinstalled all components, repaired all components, restarted my computer. I have changed firewall settings to allow acess to all of the apple components. I have made sure the required ports are open. All of the components are showing on the installed programs section of my control panel.
I am now getting an error message that says that Apple Support Application is not found error 2 (windows 5). It is listed in the installed programs and I have repaired it.
I am out of options. And help would be appreciated.'The installer has insufficient privileges to modify this file C:\Program Files (x86)\Common Files\Apple\Apple Application Support\Web kit.resources\inspector\Images\Spinner Inactive Selected.gif.'
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
Since the last update my i tunes wont launch it just give error message Error 7 (Windows error 127) how do i fix it please?
Like many others I have been reading about online I am having the same error. I tried the fix listed above and simply wasted 30 minutes of my time. I scheduled a time for Apple to call and help me through this and their solution was for me to call Microsoft for some reason?!! iTunes made me upgrade then stopped working - I really don't see how this is a Microsoft problem??
Like Darren if a solution is not found quickly I will also have to sell my phone as the only way to get videos and music on my phone is through the software that you made me upgrade, broke and won't help me fix. -
Event ID 1 Error Microsoft-Windows-UAC Microsoft-Windows-UAC/Operational
This error pops upon every restart of Windows Server 2012.
Event ID 1 Error Microsoft-Windows-UAC Microsoft-Windows-UAC/Operational
The process failed to handle ERROR_ELEVATION_REQUIRED during the creation of a child process.
Event Viewer traces user to S-1-5-18 SYSTEM, Execution ProcessID in Task Manager corresponds to SVCHOST.EXE.
SYSTEM is the owner of SVCHOST.EXE, even having granted SYSTEM permission Full Control does not fix the error.
Any help will be appreciated.@Dharmesh, thanks for your advice.
The specific SVCHOST process causing the error runs these services :
- Application Experience
- Application Information
- Certificate Propagation
- Group Policy Client
- IKE and AuthIP IPsec Keying Modules
- IP Helper
- Multimedia Class Scheduler
- Remote Access Connection Manager
- Remote Desktop Configuration
- Routing and Remote Access
- Server
- Shell Hardware Detection
- System Event Notification Service
- Task Scheduler
- Themes
- User Profile Service
- Windows Management Instructmentation
- Windows Update
I doubted if any of those would actually need the ElevateCreateProcess fix.
However, I gave it a try, applying the compatibility fixes at Server 2003 and Vista SP2 levels; yet the error was not corrected.
So, combing through those services seemed unavoidable. Eventually, the culprit was identified.
For the benefits of people encountering the same issue, this may help save some clueless efforts.
Somehow, Windows Server setup a RaMgmtUIRestartTask in Task Scheduler, to run ramgmtui.exe as Administrators at log on of any user; but, not granting it the necessary permission. It is supposed to start the Remote Access Management console, failing which
it logs the Event ID 1 Error, and gives little hint on the whereabouts of the cause.
To stop the error, one would simply locate the scheduled task, then have it disabled, or check the option to grant it the highest privilege. -
I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?
Click here and follow the instructions.
(98897) -
Itunes wont open - Error 7 (windows error 127)
When downloading the lastest version of itune my computer crashed and now itunes will not open. It says itunes was not installed correctly. Please reinstall. Error 7 (windows error 127). Reinstalling intunes has not fixed the problem. Please help!
Follow these instructions to completely remove Apple software
http://support.apple.com/kb/HT1923
Then use free Ccleaner to repeatly repair your registry until it's fixed.
http://www.piriform.com/ccleaner/download/standard
download iTunes again from Apple.
Your content will remain. -
When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates -
iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
cant open itunes. get error message 7 followed by error message windows error 127. i have redownloaded new updates with luck. window xp
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
Apple support had not responded to my requests for clarification. The update corrupted both ITunes and Office Outlook mobileme. The error message when I tried to start up I Tunes was Error 7 Windows 193. I un installed I Tunes and re installed the latest ver and encountered the same error message. I finally did a system restore. Was this a one time problem or is the update bad. In over 30 years I'd never had a problem with any Apple update.
Hi Lutacrew,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
ITunes Windows Vista - Error 7 - Windows error 998, DEP
Trying to install iTunes on windows vista laptop, iTunes installs but when i try to open it i recieve:
Error 7
Windows error 998
Data Execution Prevention
Have tried all solution given on apple solution website. Desperate for some help if any has some.
Thanks(Apologies for barging in, wha.)
In this context (launching itunes), DEP errors can indicate that some other program (other than QuickTime itself) has sprayed old versions of QuickTime componentry into unorthodox locations on the PC.
Although the error 7 is most commonly associated with Apple Application Support or .NET framework problems, it can also be associated with QuickTime trouble ... so that's consistent with the old, misplaced QuickTime componentry troubles as well.
So I think we'd better check on that possibility.
You'll need to check some view settings on the PC first.
1. From the Start menu, click Open.
2. In the Organize menu, click Folder and Search Options.
3. Click the View tab.
4. In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected, and the "Hide extensions for known file types" option is unchecked.
5. Click OK.
Now go "Start > Computer".
In Computer, open "Local Disk C:" or whichever drive your operating system is installed on.
Open the "Windows" folder.
*If you have a 32-bit Vista,* open the "System32" folder.
*If you have a 64-bit Vista,* open the "SysWOW64" folder.
What files or folders can you see in there with QuickTime in the file or folder name? (In a standard installation of QuickTime, you should see precisely two files ... QuickTime.qts and QuickTimeVR.qtx ... and no QuickTime folders whatsoever.) -
MacBook Air running Bootcamp getting ACPI errors in Windows
We have a number of MacBook Air 13" mid-2014 A1466 models running Bootcamp with Windows 7 64 bit Enterprise.
(We image them with Windows & Bootcamp, no Mac OS X partition)
We are using latest Bootcamp 5.1.5640 drivers
They work fine for most applications.
We are regularly getting ACPI errors
The error in Windows System log is
Source: ACPI
Description: The embedded controller (EC) did not respond within the specified timeoutperiod. This may indicate there is an error in the EC hardware or firmware that the BIOS is accessing the EC incorrectly. You should check with your computer manufacturer for an upgraded BIOS. In some situations, this error may cause the computer to function incorrectly.
The error we are seeing is when a user is logged into a Windows domain it should pass the Windows password to other applications like Outlook, Lync, etc. Instead, on these Macs, they regularly prompt for the Windows password to re-connect to the source. We don't get this issue with normal Windows PCs.
Also booting has a slight delay of around 10 seconds before Windows begins loading. Don't this delay with older MacBook Airs.
Have looked at repairing Bootcamp drivers. EFI & SMC looks up to date, had to use Mac boot USB to check this info.VikingBrad wrote:
Just re-reading my post and I was unclear. Yes we do use EFI and boot directly into Windows.
This is good to know.
The Windows partition is joined to an AD domain and logs in fine with AD credentials.
The only problem being that when we open Outlook or Lync or other apps that require AD authentication the user is prompted for their AD credentials.
We have cleared Credential Manager in Windows, tried different users with no success. It works with older MacBooks and Windows PC. Seems to just be these latest MacBook Air 2014 models with the issue. After user re-enters AD credentials they can connect to Outlook, etc.
This may be a bit off-topic, but Macs do not "officially" support Enterprise versions of Windows. Can I suggest using a test 2014 MBA, installing W7/W8 64-bit, and configuring for AD authentication and testing. Are there any known DNS issues on this Macs? In all the applications which do not function correctly, does the username show up correctly populated, when prompted for login?
The only error we see in Event log is the ACPI error so suspect it is related. But we have latest Bootcamp drivers from Apple perhaps we are off track.
If the user successfully enters credentials when prompted for say, Outlook, and the computer is made to sleep or hibernate, is the connection to Outlook/Lync still up if the timeout for sessions (if any) has not yet expired and the computer is woken up?
It may also be worthwhile to look for requests being made for authentication before the applications prompt the user for credentials. -
I'm getting a n error message when I try to open Itunes. Itunes was not install correctly. Please reinstall itunes. Error 7 (Windows error 1114) This happened after I unsuccesfully tried to install an update. I have had itunes on this computer for three years. When I try to reinstall the latest version I get another message.Service Apple Mobile Device (Apple mobile Device) failed to start. verify that you have sufficient privileges to start system services. Abort, Retry, Ignore Does anyone know how to solve this problem?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2
Maybe you are looking for
-
Videos squeezed in web-gallery
when importing 16:9 content and watching it in safari or firefox it turns out that video files are distorted. example: http://gallery.me.com/nmacheck#100349 look at the last couple of files - they are video content. only when downloading the files th
-
Hi can anybody tell me how to display a pdf file in a current web browser where my code is running. my pdf file is in byte array format. i already tried <embd> Thanks in Advance.
-
i have a mack pro which will not open in windows from boot camp get to the two options and select windows drive but it will not open can you help Please
-
I have purchased several albums under my regular Apple ID in iTunes. I have just signed up for the .Mac trial (which I am going to purchase) and I am going to start using my .Mac email as my primary address. The problem is, I want to change the infor
-
DRQ# Approval Process Does Not Fire on Update of Document
Hi, If a purchase order is added for a value which does not require approval, then later the actual price of the order is known and is a value which requires approval, the user is able to update the purchase order without an approval procedure being