Error in Workflow for PR Overall Release

Dear SAP Fans,
I am getting error in workflow (WS20000077) after release of Purchase Requisition with first person and getting message in OutBox with the following errors and is unable to go to next person's Inbox for release PR.
   Error when creating a work item
   Error when processing node '0000000004' (ParForEach index 000000)
   Error when creating a component of type 'Etapa'
   Error when starting work item 000000392108
   Agent determination for step '0000000004' failed
   Error in resolution of rule 'AC20000026' for step '0000000004'
   No configuration for workflow WS20000077 version 0001
   Work item 000000392108: Object FLOWITEM method EXECUTE cannot be executed
How can I correct the above errors. Please help me !!!.
Thanks in advance,

HI,
Just a thought,
Please check, If some one changed WF-USER password.
also check if the WF-USER is a Service user and not dialog user.
Regards,
-Venkat.

Similar Messages

Creating workflow for purchase order release.

Hi friends
I want step by step detail about creation of workflow for purchase order release..
After release purchase order it will goes to the two level of approval..
after that the workflow should be completed...
how can i develope the workflow for that scenario..
Thanks
Gowrishankar

Hi Gowrishankar,
You can get step by step workflow for PO using standard workflow
<b>Release of Purchase Order :WS20000075</b>
And for two levels of approvals you have to configure in SPRO the path is
Purchase Order:
SPRO> Material Management->Purchasing->/Purchase order-->Release procedure ---> Procedure with classification ---> set up procedure with classification ---> double click on Release strategies and Workflow.
If you don't know about this configuration, you have to confirm with your MM consultant.
Thanks and Regards,
Prabhakar Dharmala

Workflow for purchase requisition release strategy

Hi all,
I need an urgent help on Workflow for Purchase Requisition Release. The requirement is that when a purchase requisition with a given combination (Purchasing Group, Material Group and Account Assignment Category) is created and saved, it should trigger a workflow for approval of release or rejection to one specific business manager. If he dont responds in 2 days, it should be sent to other business manager. If any one of them releases the requisition, it should send a mail to the requestor that the requisition is released. And if it is rejected, then also a mail to be sent to the requester informing that his requisition is rejected...
Can anyone take some pain and guide me step by step procedure to implement this or to use any existing one.... I know its BUS2009 thats used in this but really dont know how to implement it properly.
Its urgent...
Edited by: Hima on Apr 11, 2008 12:45 PM

Check this link
http://help.sap.com/saphelp_47x200/helpdata/en/04/92762546f311d189470000e829fbbd/frameset.htm
Thanks
Arghadip

Workflow for Requisition item Release

Hi All,
I need to create a workflow for Requisition item Release but I wish to receive one work item for the whole requisition and not for each item
and the method of the task will be collective release (leads to me55) so that the user can choose which item to release. Is that possible?
Thanks and Regards,
Inbal

Hi All,
I think i found the answer but i need help to do it.
Every time a work item is created, the system needs to check if there is another work item with the same Requisition No. and same release code in status=ready.
If not, it will send the work item.
result:
The first work item (first line in Requisition) will be sent, and as for the others (other lines in Requisition), as long as there is no work item with the same Requisition No. and same release code in status 'ready' the system will send it.
Anybody can help me?

Error in Workflow for Parked Document (FV60)

Hi Workflow Experts,
I have a FI document parking Workflow scenario which is 3 level release that is if the amount is upto 10000 first person will release if it's more than that upto 20000 then second user has to release ,if more than that then third user will post.
For this i have activated the main workflow WS10000051 and for two level release i have activated the sub workflows WS10000052 for first level release and WS10000053 for secondlevel release and WS10000054 for thirdlevel release.
I have also done the Release strategy configuration in SPRO such as
in the following SPRO steps
1) Create Workflow Variant for Parking Document
2) Define Entry Screens for Parking Document
3) Assign Compaany Code to a Workflow variant for Parking Documents
4) Define Release Approval Groups for Parking Documents
5) Define Release Approval Path for Parking Doc
6) Assign Release Approval Path for Parking Documents
7) Assign Release Approval Procedure for Parking Doc
8) Define Users with Release Authorization for Parking Document. ( I have assigned the Position of CEO created in HR to this)
Now when the document is parked it throws the error
Error in workflow Customizing for document parking (tranasction OBWE) and it stops in the step Determining Sub Workflow.
Has anyone come across this issue.Please guide me in resolving in this issue, i am not able to identify whether this error is happening in workflow or due to some missed entries in SPRO settings of FI.
So please provide me how to do settings in SPRO For Parking, mainly in Tcode OBWE.
Regards,
Sagar

Hi,
Your question is exactly same as below.
[Re: Error in FI Document Parking Workflow;
Hope you 've gone thru this link already, if not, pl. go thru the above link. Also, give us more details on the error you see on the wflow log, like you are not getting any wflow template ID in the cont.element "&ACTIVITY_000043_TASK&", This should have either WS10000052, 53 or 54 depending on the Amt. level. See if you are getting any value here. If not, then there is somethign wrong in your OBWE settings.
Also, sometimes, even though this step of "Determe Subworkflow" step works fine, if there is no proper agent assignment, then also, it cannot create work item for next step of Sub wflow and hence will error out.
Pl .check the above. May be a detailed error message from wflow log would help us out in suggesting better.
Goodluck
venu

Workflow for P.O release process.

Hi Guys,
As per the one of the thread I have done setting as per the below. Ref last 10 line for the details of the problem.
Hi,
1) Work flow: - Work flow is standard functionality of SAP.
I give one example to u.
In the case of purchase order creation, First purchase person create purchase order, then first purchase order approved by purchase head and then auditor approved purchase order on print of purchase order.
With work flow you can send soft copy of purchase order to both person purchase head and auditor to approve your purchase order.
Due to this your process for purchase material is faster then manual process.
2) You can implement work flow in purchase order release strategy with below mention detail.
For mail facility, you need to activate workflow for PO release procedure;
*Go to SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders *
Define Release Procedure for Purchase Orders > Release Codes >
here assign Workflow indicator as "1" against each Release Code
Now come to SPRO > MM > Purchasing > Purchase Order > Release Procedure for Purchase Orders >
Define Release Procedure for Purchase Orders > Workflow >
Here against each release code assign OT as US and respective User ID's for Release Codes.
Now Go to OOCU > here under MM, go to MM-PUR,
Now click on "activate event linking"
Here open "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button
Here activate "Event linkage activated" and also activate "Enable usage of event queue" and Save data.
Same way and click on "Assign agents" and proceed all above steps.
Now create a PO and check the SBWP for SAP Mail of respective Users
This was the details given by the thread but now I have completed till
OOCU > here under MM, go to MM-PUR,
Now click on "activate event linking"
Here open "WS 20000075" and for BUS2012 RELEASESTEPCREATED, click on Detailed view button
Here activate "Event linkage activated" and also activate "Enable usage of event queue" and Save data.
For proceeding futher as said in the above procedure. I am getting User ID inside WS20000075 when I click on Assign Agents but I am not getting the details button to repeate the step as said.
Please let me know whatever I have done is enough to get the mail or is there any thing else need to be done.
Thanks
Dhanu

Hi,
release code and release group should be assigned in the authorization object for the approving authorities.
apart from this the settings looks ok and it will work

Error in Workflow for Service Confirmation

Hello,
We are using SAP SRM 7.0 for our project with Extended classical scenario. We need to build a workflow for Service confirmation approval. We are supposed to use the Process controlled workflows.
I am using the standard workflow template WS40000014 (Process controlled). In SWETYPV, i have activated the event linkage for BO '/SAPSRM/CL_WF_PDO_SC' and event 'READY_FOR_WORKFLOW' for the template WS40000014. Rest everything is untouched.
Now when I am trying toe trigger the workflow by creating a confirmation in the SRM Portal, the confirmation is created successfully but when I see the workflow log, I can see the step 'Create Decision Set' in the task TS40007938 in the status 'ERROR'. Upon drilling, the error text says :
"Work item 000000005074: Object /SAPSRM/CL_WF_PROCESS_MGR_SBWF method CREATE_DECISION_SETS cannot
Message no. WL821
"Error raised in business class ''"
Is there anything missing in the config which I need to check? Please help!
Thanks in advance.

Hi there,
This kind of error usually means:
[1] The triggering user does not have the correct authorization to
    execute the agent assignment of the first step
- Please trigger the workflow with a user with SAP_ALL in order
      to test if this is the case.
[2] The business object instance is not being passed to your workflow
    and so the initial step cannot be created or executed. Please
    check the binding to make sure the instance is passed at
    designtime and also runtime (Via technical log -> workflow
    container).
Hope this helps,
Kind Regards,
Matthew

Workflow for PO re- release

Gurus,
ply help in develpoing a workflow
Po re-released means value changed from 10rs to 20 rs an alert to the manager
how is this possible
regards
amey

Hi Amey,
If the value changed is one of the characteristics you used as part of the release strategy, then automatically the PO will be blocked again. If your scenario is like that, then you can use the standar SAP WF, for the specific release code you are using in the release strategy then you can activate the Workflow, specifying the person that will receive the notification.
Hope it helps, thanks.

PR workflow for item level release (stock and non-stock)

Hello gurus,
I am not getting the agents.!!
I am creating a workflow for pr( item level release)..and using standard wf WS00000038 for this, as the standard wf contains the simple release procedure only but i have to add some custom steps to it, so i have copied this wf as custom wf .
In this wf i have to fetch the agents based on the "stock" and "non-stock items".
so i have maintained strategies and release code like:
i have maintained two strategies W1(non-stock) and W2(stock)..and release code for W1 are P1 and P2..here P1 i have given for my first level of approval and P2 for second level of approval.
The release code for W2 are P3 and P2..first level is P3 and second is P2.
so what i have did in a workflow , started with a condition step where i have given "releasecode = p1".. if yes than than it will go for getting approval from p1 , in this activity i am using standard rule 157.
The main thing is 1). i am not getting how to fetch agents using standard rule. 2)and how and where to define next level of approval for both stock and non-stock.
means by using condition step in the starting i am dividing workflow in two parts stock and non stock but how to proceed next.
i am really confused. should i use rules or write my own methods. please if anybody has gone through the same scenario than please suggest some points. i will really appreciate the help.
Kind Regards.
Himanshu

Hello HIM Joshi !
                   Include the task TS00007986 and all its branches and in a loop and loop around it for two times.When the loop goes for the first time, it should pick the first agent and during its second iteration, it should pick the second agent.
                   To accomplish so, In the same loop, but before the above task , include a background task which should populate the agent ids depending on stock and non-stock details and pass it to the the task TS00007986
                   That's all.
Regards,
S.Suresh

Workflow for P.O release to send sap internal mail

Hi
I am trying to configure Workflow for the following scenario of release. Please guide me how to configure the same in sequence with t-code.
We have two level of release procedure for P.O depending upon P.O value.
When P.O created the first approver should to get SAP internal e-mail.
Once 1st release done then 2nd approvar should get the SAP internal e-mail.
When final release is done then Creater of the P.O should get the intimation about the final release in his mail box.
Please guide with Workflow ID's and task and where to assign agent etc.
Thanks,
Dhananjay

Hi
I tried to do the setting as instructed in many threads. Result is as follows.
When I create a contract 1st approver receing the mail, but after releasing workflow status is still inprocess and the 2nd approver is not getting any mail.
As I did work arroung job I am not able to understad the exact process(Sequnce of setting) to be done.
That is why I posted in thread.
Please guide the flow of setting.
Thanks,
Dhananjay

Workflow for Sales Order Release via Status Profile

Dear all,
i want to make a workflow for sales order which have 4 User Status in One status profile.
Once Event triggered for sales order
1.   Mail should go to main authority with sales order number.
2. Once authority will do some changes in the required field then he/she changes
     the user status-1 from defauts as per line Item and mail should go to department no-1 (Head authority).
3. Once again same changes in sales order but now user status-2 from user status-1
     as per line Item and mail should go to department no-2 (Head authority).
4. Once again same changes in sales order but now user status-3 from user status-2
     as per line Item and mail should go to department no-3 (Head authority).
5. Once again same changes in sales order but now user status-4 from user status-3
     as per line Item and mail should go to department no-4 (Head authority) .
and parrally for each changes of Status mail should also go to User (Event Creator).
6. Finally mail sholud go to User as you are permitted to do next business transaction for this sales order
Please tel me the process as i am very new this topic and i am always going to stuck in Binding.
please help me out.
Thank You

Hi Neeraj,
First of all start with SWELS and SWEL T-Code to check if any standard event is getting triggered or not. If event is getting triggered, then use the same event to trigger the workflow; otherwise create a custom event of BO and use the same to trigger the workflow.
Hope you are aware of T-Code SWO1 and delegation of BO. The BO used for your requirement will be BUS2000115.
As you want the workflow to get triggered only for one status profile and one of its status, so use check function module. There set the condition for you status profile and status.
The FM which you will be using the most is CRM_ORDER_READ. To read the status, you can also use CRM_STATUS_READ_OW.
Now simply make the approval steps in the workflow using activity. In the activity, you can use the standard method USERSTATUSPOPUP to send the workitem for approval. In each step use the same activity with different agents as approvers.
Just go with these things and let me know if you get stuck up somewhere.
Regards,
Guddan

Error in workflow for transport proposal

Hi
I've got an error in transport proposal. Actually we are creating transport proposal after realeasing transport . There is a workflow running behind it. it's a standard workflow template no : WS30000524.
It was running absolutely fine till yesterday. But today I've found a strange error. The error is as below:
Problems occurred when generating a mail
Error '9' when calling service 'SO_OBJECT_SEND'
Workflow 179001: Repair message for error & could not be created
Inconsistent workflow definition: Node/step number 1 is not available
Error '9' when calling service 'SO_OBJECT_SEND'
Inconsistent workflow definition: Node/step number 1 is not available
Workflow 179001: Repair message for error & could not be created
Problems occurred when generating a mail
Also, the container SOFM,CTProposal etc are not actually even displayed in the WF log. No step has been created.
Is there any config missing?
It would be very helpful if anyone has faced such issue and can help me.
Thanks
Moumita

Hi
i'm using version 4.7. Also I've checked the wf template there is no fork. It's a standard wf... template number I've mentioned in my first mail.
While transporting any change feom Development system to Test system we are actually creating transport proposal. You can find a tab of transport proposal in SE10. After creating this transport proposal a standard wf got triggered for approval of transport proposal. This workflow went into error.
hope this small backgroung will help you to get into my actual issue.
Please let me know if you have any understanding regarding the root cause of this issue.
Thanks
Moumita

Getting a error when workflow for some users

Hi,
I'm getting this weird error when some users run this workflow. I'm not sure what the problem is how you can help. ALso how woul I enable some of these logging items.
RequestorId: 2184e724-ab10-839d-4bda-e8175db97de3. Details: System.ApplicationException: HTTP 401 {"error_description":"The server was unable to process
the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception
information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["95c54cfd-7287-4eca-90a5-cb562caca261"],"request-id":["95c54cfd-7287-4eca-90a5-cb562caca261"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["57"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/8.0"],"WWW-Authenticate":["Bearer
realm=\"c7a65b41-dec2-476c-a601-e711474abe56\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]474abe56\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4496"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Thu, 04 Dec 2014 02:42:23 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)

Hi,
Check if User Profile Synchronization service is running and Full Synchronization is done, check all the users that are getting
error available and sync properly. If user is not available in the User Profile List run Full Synchronization manually or add manually new User Profile to User Profile List.
Check this for more details
http://chrisdomino.com/Blog/Post/SharePoint-2013-Quick-Tips-Workflow-And-The-User-Profile-Service
Krishana Kumar http://www.mosstechnet-kk.com

Error in Workflow For Role Approval

Hello ,
While i am approving the request i am getting the following error:
Error processing your request, Request no: 2 in stage : ERM_STAGE
What could be the cause for this error?
Logs are pasted for your reference:
2009-08-19 14:31:40,244 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.virsa.ae.service.ServiceException: Exit URI is not defined for wfType : RE
com.virsa.ae.service.ServiceException: Exit URI is not defined for wfType : RE
     at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.getDocument(RequestExitServiceHelper.java:188)
     at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.callExitService(RequestExitServiceHelper.java:157)
     at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.callExitServiceForApprovedRequest(RequestExitServiceHelper.java:56)
     at com.virsa.ae.accessrequests.bo.RequestBO.callExitService(RequestBO.java:5335)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:5174)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:4967)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:928)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:103)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:271)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:425)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:455)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:455)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
2009-08-19 14:31:40,260 [SAPEngine_Application_Thread[impl:3]_6] ERROR com.virsa.ae.service.ServiceException: Exit URI is not defined for wfType : RE
com.virsa.ae.service.ServiceException: com.virsa.ae.service.ServiceException: Exit URI is not defined for wfType : RE
     at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.getDocument(RequestExitServiceHelper.java:209)
     at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.callExitService(RequestExitServiceHelper.java:157)
     at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.callExitServiceForApprovedRequest(RequestExitServiceHelper.java:56)
     at com.virsa.ae.accessrequests.bo.RequestBO.callExitService(RequestBO.java:5335)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:5174)
     at com.virsa.ae.accessrequests.bo.RequestBO.approveRequest(RequestBO.java:4967)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.confirmRequestApproval(RequestViewAction.java:928)
     at com.virsa.ae.accessrequests.actions.RequestViewAction.execute(RequestViewAction.java:103)
     at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:271)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:425)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:455)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
     at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
     at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:455)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
Caused by: com.virsa.ae.service.ServiceException: Exit URI is not defined for wfType : RE
     at com.virsa.ae.accessrequests.bo.RequestExitServiceHelper.getDocument(RequestExitServiceHelper.java:188)
     ... 32 more
Regards,
Kumar Rayudu

Hello Gangadhar,
What you want to say is i have not specified the correct URL in Custom Approver Determinator but i have not used the Webservice option in CAD Type but specified the Attribute as Request Type.
In ERM i have specified the correct URL by copying the correct URL using the WSDL.
Can you please brief it?
Regards,
Kumar Rayudu
Edited by: Kumar Rayudu on Aug 19, 2009 3:10 PM

SAP Standard Workflow for PR Release (with user exit)

Hi SAP WF Gurus,
Good day!
I just wanted to check with you if you have ever used a user exit in the activation of the standard workflow for PR (overall ( release. What we have is a two0step approval process wherein each level has a proxy/alternate approver. We used the available user exit to accommodate this customer requirement since the standard release would only allow us to define 1 approver as a prerequisite for the next level. We were able to execute this on the first level approval; however, we observed that the workflow is not anymore triggered (i.e. does not send work items to agents) for the level 2 release. My questions therefore are:
1. How to set up SWEC? I already executed SWELS and SWEL to check if the events are being created and event linkage is automatically deactivated after running into an error regarding the binding...My initial SWEC setup is for BANF BUS2105 RELEASED On Change. I am assuming that since the workflow was released from the first level, this should be the starting point
2. How to rectify the binding error? I already executed automatic binding in the WF header for the start events but still face it
Your inputs/comments are most welcome
Regards,
DeLo

Just to add:
The error that I am encountering in the second run/cycle for the PR approval workflow is Import container contains errors (are any obligatory elements missing?)
Basically, WS20000077 will be executed if an approval level is seen. Once the approval is made, then the workflow is also completed. However, for multiple approvers, I only get to execute successfully the first level approval. The succeeding levels are encountering errors as stated above

Error in Workflow for PR Overall Release

Similar Messages

Maybe you are looking for