Error in Workflow log

Hi All,
I have got very little knowledge of workflows thus seeks the help from all of you.
The problem is as folows.
When I execute tcode SWI1 and click on any task it goes to the workflow log. When I click on the details of the workflow so the agents are displayed.But when I click on the object associated to any agent, the system displays and error message 'Error triggering method for Holiday Entitlement' where Holiday Entitlement is the Object associated to an agent.
Please let me know why this error is occuring and how can I resolve it.
Regards

One possibility is insufficient authorization. I probably don't have to tell you how to resolve that.
Another possibility, especially if the workflow has status "Error" is that the object does not have a valid key. I shouldn't have to tell you how to resolve that either. However, if this is the problem, and you need help to resolve it, you should tell us how your workflow is started.
General hints: binding, binding, binding.

Similar Messages

Workflow log in error

Hi,
I have one workflow log for ivoice.
It is in error stste in one step. I have restaterd the main workflow using swpr .
Still the workflow is in error.
User wants to complete the workflow in any case. But if I use SWIA then it says that error workflow can not be completed manually.
Please suggest how can i complete the workflow.
egards,
Sandeep

Hello,
Try it with fm SAP_WAPI_ADM_WORKFLOW_CANCEL
regards
Rick Bakker
Hanabi Technology

Agent determination for step 0000000081 failed error in workflow

Hello All,
I am doing employment verification from ESS portal. In the workflow step I have selected RULE to determine the agent. To configure rule, I double click on rule, on next screen selected "Agent determination - responsibilties" to determine the agent. I configured responsibilties with the valid value ranges and everything but the workflow is going into error! I did research and not sure what I am doing wrong. I checked the workflow container in workflow log and all the values that are supposed to pass to rule container are showing up fine.I keep getting the error:
Agent determination for step 0000000081 failed
Result og agent resolution does not agree with agents of task.
Any feedback you could provide would be greatly appreciated.
Thanks.
Mithun

1. In Transaction PFTC, select Task Type = Standard Task and Task = 01000076
2. display the task details.
3. Now go to Additional data ->Agents Assignment->Maintain
4. Select the task here and click Attributes in the application tool bar.
5. Select the General Task radio button and hit transfer.
-- You have made your task general.
To Synchronise the runtime buffer ,simply excute T-Code SWU_OBUF and hit the Start Synchronization button.

Parameter file not found in the location as specified by infa workflow log

Hi,
I am unable to find the Parameter file in the location, /u01/obi/inf_svr/server/infa_shared/Temp/SDE_ORA_APTransactionFact_ExpenseDistribution_Full_vxqbGa, as specified in the Informatica workflow log. But Informatica maps are succeeding without any error. Also Parameter file location specified by DAC is different ie /u01/obi/inf_svr/server/infa_shared/SrcFile and proper parameter file exist in this location. Please someone help clarify what is happening here and how the maps are succeeding with the parameter file as specified in th workflow log.

How to configure the task(Informatica workflow) which contains two sessions in it?
Because I found a recommendation that every workflow should have only one session in it and the session name must be same as that of workflow name. But my requirement is, I have to configure a workflow in DAC which contains two sessions in it.
Thanks a lot in advance for all your help sir.

Error in Workflow-step

hi,
i have mad a modification in my workflow, now it is stopped with the following error:
Source (expression '&_WORKITEM.WORKITEMFATHER.WORKITEMID&') of binding assignment is not availabl
Message no. SWF_BND_001101
i have tried to put the workitem-id of the workitem-father to my step in the bindings. i don't understand
why this error occurs.
when i look to the container in workflow log in my step the workitem-id mentioned above is filled with a value.
any ideas ?
best regards, Martin

Hi,
Ok, You said that you had to modify an existing workflow and after modification it started giving the errors. So you said you have done the respective binding.
So just try to refresh the buffer by executing the transaction SWU_OBUF and click SHIFT + F1.
And try to re start the workflow.
Regards
Pavan
Edited by: Pavan Bhamidipati on May 17, 2011 3:40 PM

Error in Workflow Multiline Container

I'm facing with two error during implementing multiline container: "Agent determination for step '0000000002' failed" and "Result of agent resolution does not agree with agents of task".
What I've done is:
- "AGENTS" container created which refer to USR02-BNAME. In the properties tab, I checked the multiline check box. The contents of this container is coming from method in the main workflow. In the workflow log, I saw this container filled correctly. Its contain 2 line of user id.
- I have subworkflow-2 that I set as multiline element in tab "other" and filled "AGENTS" container in that field. This subworkflow contain only one task that need to be executed by many user. The binding from previous subworkflow to this subworkflow-2 is: &AGENTS[&_WF_PARFOREACH_INDEX&]& --> &AGENTS1&
"AGENTS1" is single container which refer to USR02-BNAME.
- The binding from subworkflow-2 into task is: &AGENTS1& --> &AGENTS1&
When I executing this workflow and checked in the workflow log "AGENTS1" container is filled with "000001" same value with container WfParForEach_Index.
Hopefully out there can help me on this issue.

Hello,
I have the same problem. I've found this link http://mailman.mit.edu/pipermail/sap-wug/2008-March/028123.html where a possible solution is detailed.
I have planned to made test on it in next day.
Regards,
Corrado.

Check Event Alert failed with error - No errors in the log file.

Hi All,
I am developing a simple event based alert on PO_HEADERS table. I want to send alerts when a PO is created.
I did all the steps according to the metalink note How To Send An Email In A Simple Periodic Or Event Alert? [ID 1162153.1]
When i create the PO, the alert is triggering, and Check Event Alert concurrent program is running. But the program completes with error.
Checking the output file (empty) log file (no errors)
What can i do here to find out what is the problem? There is nothing in the Alert Manager - History form also. I have kept 7 days as days to keep.
Thanks!
M

Can you find any details about the error from the "View Detail" button (the same window where you check the log and output files)?
I found the Workflow logs, I am not sure what I am looking for, but i am not seeing any errors reported.The event viewer is supposed to send an email, so do you see anything in the logs that could be related?
Thanks,
Hussein

Error on Workflow email notification in oracle 11.5.10.2

Anyone seen similiar error on Workflow email notification in oracle 11.5.10.2
UNEXPECTED:[fnd.wf.bes.server.SystemLoader.getLocalSystem]:Caching disabled due to JTF exception: oracle.apps.jtf.base.resources.FrameworkException: CacheComponent not registered (KEY=FND_BES_SYSTEM_CACHE) (APP=FND)
UNEXPECTED:[fnd.wf.bes.server.AgentLoader.getAgent]:Caching disabled due to JTF exception: oracle.apps.jtf.base.resources.FrameworkException: CacheComponent not registered (KEY=FND_BES_AGENT_CACHE) (APP=FND)

I do not see any similar issues reported in MOS website that could be relevant to Workflow.
Can you find any errors in the database log file?
Please run the diagnostics scripts in these docs and see if it helps.
Troubleshooting Oracle Workflow in Applications 11i [ID 262011.1]
11i: Oracle Workflow Cartridge (WF): Workflow Java Mailer Diagnostic Test [VIDEO] [ID 1148948.1]
11i: Oracle Workflow Cartridge (WF): Workflow Health Check Diagnostic Test [VIDEO] [ID 1148953.1]
11i : Oracle Workflow Cartridge Workflow Java Mailer Setup Test [ID 274764.1]
If the diagnostics scripts did not help then I would suggest you log a SR.
Thanks,
Hussein

Wfload erroring out (workflow, standalone, on 10r2 database on linux)

I'm having problems installing workflow workflow 10.1.0.3 on my Ubuntu linux
box, that is running an oracle 10 release 2 database.
The Workflow configuration agent (that is started via this script:
$ORACLE_HOME/wf/install/wfinstall.csh), claims that everything is
fine ("WorkflowCA: Workflow Configuration has completed successfully."),
but looking at the workflow log file reveals following errors when wfload
is invoked:
WFLDR_LEVEL_LOG MODE=UPLOAD LEVEL=100
wferr:
- WFLOAD_LANG_NOT_SET
- WFUPI_FAIL MESSAGE=ORA-01041: internal error. hostdef extension doesn't exist
STATEMENT=SELECT NLS_LANGUAGE FROM WF_LANGUAGES WHERE :l IN (NLS_LANGUAGE, CODE)
Has anybody else experienced the same problem ?
One thought:
I've configured the database language and region as AMERICAN but with
character set WE8ISO9959P1 (so not the default US7ASCII), and I've
experimented with different settings for NLS_LANG, NLS_LANGUAGE,..
but to no avail.
Another thought:
Is this due to the fact that it is workflow 10r1 talking to a 10r2 database ?
(ie. should I install a 10r1 database ?)
Any idea?
Regards,
Willem

I have very limited idea about the charsets. With whatever I know..
You can install your database with whatever charset that you want as long as the data that you are storing in the database can be stored in that charset. I am sure US7ASCII is a sub-set of WE8ISO9959P1 and all characters in US7ASCII are supported in WE8ISO9959P1 charset.
Also, the entries in WF_LANGUAGES are only suggested character sets for data represented in that language. So the whole setup seems valid to me and the error seems to be from somewhere else.
SR with Oracle support might help.
Thanks
Vijay

Error in Workflow for Service Confirmation

Hello,
We are using SAP SRM 7.0 for our project with Extended classical scenario. We need to build a workflow for Service confirmation approval. We are supposed to use the Process controlled workflows.
I am using the standard workflow template WS40000014 (Process controlled). In SWETYPV, i have activated the event linkage for BO '/SAPSRM/CL_WF_PDO_SC' and event 'READY_FOR_WORKFLOW' for the template WS40000014. Rest everything is untouched.
Now when I am trying toe trigger the workflow by creating a confirmation in the SRM Portal, the confirmation is created successfully but when I see the workflow log, I can see the step 'Create Decision Set' in the task TS40007938 in the status 'ERROR'. Upon drilling, the error text says :
"Work item 000000005074: Object /SAPSRM/CL_WF_PROCESS_MGR_SBWF method CREATE_DECISION_SETS cannot
Message no. WL821
"Error raised in business class ''"
Is there anything missing in the config which I need to check? Please help!
Thanks in advance.

Hi there,
This kind of error usually means:
[1] The triggering user does not have the correct authorization to
    execute the agent assignment of the first step
- Please trigger the workflow with a user with SAP_ALL in order
      to test if this is the case.
[2] The business object instance is not being passed to your workflow
    and so the initial step cannot be created or executed. Please
    check the binding to make sure the instance is passed at
    designtime and also runtime (Via technical log -> workflow
    container).
Hope this helps,
Kind Regards,
Matthew

Error when workflow created from Function Module

Hi All,
I am trying to implement leave module workflow for one of my requirement.
when i create a leave from PTARQ transaction workflow it is being triggered, but when i tried to do the same from a custom function Module using the same FMs used in PTARQ, workflow initiated but stopped at initial stage( at switch branch )
i went to SWI1 transaction and executed it manually, it end up with error saying ' Error when starting a SWITCH branch'
what should i do to move it forward.
Thanks,
Krish.

Hi Kishore,
For leave workflow, SAP has the separate frame work. They called the FM SAP_WAPI_START_WORKFLOW and pass all necessary data's to Process the leave workflow.
Its not advisable to overwrite the standard behavior. Please check your 'REQ' workflow container in the log. There will be a no data or Some data's might be Missed.
Before Call the FM, make sure that all data's are passed to the Table parameter, SImple_Container.
The reason for the Error in your workflow is, there is no data stored in REQ.STATUS container.
please check the Workflow log.
Thanks.

Error in Workflow for Parked Document (FV60)

Hi Workflow Experts,
I have a FI document parking Workflow scenario which is 3 level release that is if the amount is upto 10000 first person will release if it's more than that upto 20000 then second user has to release ,if more than that then third user will post.
For this i have activated the main workflow WS10000051 and for two level release i have activated the sub workflows WS10000052 for first level release and WS10000053 for secondlevel release and WS10000054 for thirdlevel release.
I have also done the Release strategy configuration in SPRO such as
in the following SPRO steps
1) Create Workflow Variant for Parking Document
2) Define Entry Screens for Parking Document
3) Assign Compaany Code to a Workflow variant for Parking Documents
4) Define Release Approval Groups for Parking Documents
5) Define Release Approval Path for Parking Doc
6) Assign Release Approval Path for Parking Documents
7) Assign Release Approval Procedure for Parking Doc
8) Define Users with Release Authorization for Parking Document. ( I have assigned the Position of CEO created in HR to this)
Now when the document is parked it throws the error
Error in workflow Customizing for document parking (tranasction OBWE) and it stops in the step Determining Sub Workflow.
Has anyone come across this issue.Please guide me in resolving in this issue, i am not able to identify whether this error is happening in workflow or due to some missed entries in SPRO settings of FI.
So please provide me how to do settings in SPRO For Parking, mainly in Tcode OBWE.
Regards,
Sagar

Hi,
Your question is exactly same as below.
[Re: Error in FI Document Parking Workflow;
Hope you 've gone thru this link already, if not, pl. go thru the above link. Also, give us more details on the error you see on the wflow log, like you are not getting any wflow template ID in the cont.element "&ACTIVITY_000043_TASK&", This should have either WS10000052, 53 or 54 depending on the Amt. level. See if you are getting any value here. If not, then there is somethign wrong in your OBWE settings.
Also, sometimes, even though this step of "Determe Subworkflow" step works fine, if there is no proper agent assignment, then also, it cannot create work item for next step of Sub wflow and hence will error out.
Pl .check the above. May be a detailed error message from wflow log would help us out in suggesting better.
Goodluck
venu

Informatica - Workflow Logs: How to remove INFO "VAR_27014 [Warning!...

Hi, this is my first post here, so plz excuse any mistakes :)
I'm using Informatica PowerCenter 7.1.4. Every time there is a new workflow log created, for each session, there is set of parameters logged with the name and value pairs.
INFO : TM_6292 : (372964|1) Session task instance [S_SESSION]: VAR_27021 [Parameter file [ConfigFiles/properties.pmf] opened for session [S_SESSION].].
INFO : TM_6292 : (372964|1) Session task instance [S_SESSION]: VAR_27014 [Warning! Found an unused name and value pair [DBConnectionStringStage = /@] in parameter file[ConfigFiles/properties.pmf].].
Is there any option, to switch this logging level off? Or only those kind of messages (VAR_27014)?
Sometimes the values includes some passwords, and our admins have problems with this.
I've tried changing the parameter ErrorSeverityLevel=Error in a pmserver.cfg, but it doesn't affect above INFO messages. I've also changed the same parameter for the repository server - still nothing.
Hope you could give me any solution or a workaround.
Thanks,
Blazej

Hi, this is my first post here, so plz excuse any mistakes :)
I'm using Informatica PowerCenter 7.1.4. Every time there is a new workflow log created, for each session, there is set of parameters logged with the name and value pairs.
INFO : TM_6292 : (372964|1) Session task instance [S_SESSION]: VAR_27021 [Parameter file [ConfigFiles/properties.pmf] opened for session [S_SESSION].].
INFO : TM_6292 : (372964|1) Session task instance [S_SESSION]: VAR_27014 [Warning! Found an unused name and value pair [DBConnectionStringStage = /@] in parameter file[ConfigFiles/properties.pmf].].
Is there any option, to switch this logging level off? Or only those kind of messages (VAR_27014)?
Sometimes the values includes some passwords, and our admins have problems with this.
I've tried changing the parameter ErrorSeverityLevel=Error in a pmserver.cfg, but it doesn't affect above INFO messages. I've also changed the same parameter for the repository server - still nothing.
Hope you could give me any solution or a workaround.
Thanks,
Blazej

Workflow Log - No proceedings found

Hi Experts,
I had developed a simple workflow scenario (SWDD) just to send a mail to inbox which contains only 2 items (in SBWP):
Accept or Reject.
I had created the step for User decison & steps for Approval and Reject only.
Workflow is error free and activated.
When i see the Graphical workflow log, the green line stopped at the decision step to approve or reject.
After this, it has to send a mail to SBWP.
Please tell me if where i am wrong?
Thanks
Dany

Please check wether you maintain you Standard task as General Task or not.
If it is not maintain then it will may give such problem.
To make it General task
additional data->agent assignment -Maintain
as general task

Workflow Infrastructure Error: 88xr Unexpected WinWF Internal Error,terminating workflow Id#03888be1-28c8-409d-bc65-7115bc17edfa

Hello Friends,
I have developed a custom sequential workflow in SharePoint Server 2010 using VS 2010. My workflow gets activated and then creates a new task in the Tasks List.
But "Error Occurred" gets displayed in the Workflow column in the default view of my document library instead of "In Progress".
I debugged my code and there are no errors in it. But I found the below error in \14\LOGS\:
"SharePoint Foundation Workflow Infrastructure Error: 88xr Unexpected WinWF Internal Error,terminating workflow Id#03888be1-28c8-409d-bc65-7115bc17edfa"
I have set the properties correctly for the workflow activities in VS 2010.
Can anybody help me solve this error?
Thanks in advance...
Regards,Gautam Kaikini.

I am having the same issue, here is some of the logging errors I am seeing. If anyone has any ideas I would be forever in your debt,
02/24/2011 11:32:47.52 w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
88xr Unexpected
WinWF Internal Error, terminating workflow Id# 4128e252-208e-4d6c-8772-12c51959038e
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52 w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection
sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedSuffix)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedSuffix) at Microsoft.SharePoint.Utilities.SPUtility.GetFullUserKeyFromFullName(String
fullName) at Microsoft.SharePoint...
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52* w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
....SPGlobal.CreateSPRequestAndSetIdentity(SPSite site, String name, Boolean bNotGlobalAdminCode, String strUrl, Boolean bNotAddToContext, Byte[] UserToken, String userName, Boolean bIgnoreTokenTimeout, Boolean bAsAnonymous) at Microsoft.SharePoint.SPSite.GetSPRequest()
at Microsoft.SharePoint.SPSite.get_Request() at Microsoft.SharePoint.SPSite.OpenWeb(Guid gWebId, Int32 mondoHint) at Microsoft.SharePoint.Workflow.SPWinOEWSSService.GetWebForWorkflow(SPWorkflow wf, SPWorkflowUserContext
runAsUser) at Microsoft.SharePoint.Workflow.SPWinOEWSSService.get_Web() at Microsoft.SharePoint.Workflow.SPWinOEWSSService.GetWebForListItemService() at Microsoft.SharePoint.Workflow.SPWinOEWSSService.UpdateModerationStatus(Guid
id, Guid listId, SPItemKey itemKey, SPModerationStatusT...
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52* w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
...ype newModerationStatus, String comments) at Microsoft.Office.Workflow.Actions.SetTaskProcessItemModerationStatus.DoUpdate(ActivityExecutionContext context) at Microsoft.SharePoint.WorkflowActions.WaitForDocumentUnlockActivity.Execute(ActivityExecutionContext
executionContext) at Microsoft.Office.Workflow.Actions.SetTaskProcessItemModerationStatus.Execute(ActivityExecutionContext context) at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(T activity, ActivityExecutionContext
executionContext) at System.Workflow.ComponentModel.ActivityExecutor`1.Execute(Activity activity, ActivityExecutionContext executionContext) at System.Workflow.ComponentModel.ActivityExecutorOperation.Run(IWorkflowCoreRuntime workflowCoreRuntime)
at System.Workflow.Runtime.Schedule...
616e0e48-457e-4620-8191-dbe40c9af587
02/24/2011 11:32:47.52* w3wp.exe (0x0A14)
0x0F40
SharePoint Foundation Workflow Infrastructure
98d4 Unexpected
...r.Run() 616e0e48-457e-4620-8191-dbe40c9af587
Thanks in advance!

Error in Workflow log

Similar Messages

Maybe you are looking for