ERROR: In WorkFlow Subprocess Step
Hi....Friends
I have created one workflow named as "Test Opty Name WF" that insert a record in detail applet (Opportunity Contact List Applet), when Opportunity Name = "CONTACT" in parent Applet(Opportunity List Applet). its working good.
So i deployed...After that i have created a new Workflow named as "Test SubProcess WF" its contain Subprocess(Test Opty Name WF) step. when i run this workflow its throws the message as
Error Running sub-process "Test Opty Name WF" at step Sub Process (SBL-BPR-00183)
Thanks in Advance...
Edited by: .Rajesh. on Nov 4, 2009 6:04 PM
Additionally Please Tell me... what Input Arguments and Output Arguments values i will give in the Sub Process Step..
Edited by: .Rajesh. on Nov 4, 2009 6:36 PM
Similar Messages
-
ERROR (SBL-BPR-00183): In WorkFlow SubProcess Step
Hi....Friends
I have created one workflow named as "Test Opty Name WF" that insert a record in detail applet (Opportunity Contact List Applet), when Opportunity Name = "CONTACT" in parent Applet(Opportunity List Applet). its working good.
So i deployed...After that i have created a new Workflow named as "Test SubProcess WF" its contain Subprocess(Test Opty Name WF) step. when i run this workflow its throws the message as
Error Running sub-process "Test Opty Name WF" at step Sub Process (SBL-BPR-00183)
Thanks in Advance...Additionally Please Tell me... what {color:ReD}*Input Arguments* and Output Arguments {color}values i will give in the Sub Process Step.... ?:|
Edited by: .Rajesh. on Nov 11, 2009 4:37 PM -
Agent determination for step 0000000081 failed error in workflow
Hello All,
I am doing employment verification from ESS portal. In the workflow step I have selected RULE to determine the agent. To configure rule, I double click on rule, on next screen selected "Agent determination - responsibilties" to determine the agent. I configured responsibilties with the valid value ranges and everything but the workflow is going into error! I did research and not sure what I am doing wrong. I checked the workflow container in workflow log and all the values that are supposed to pass to rule container are showing up fine.I keep getting the error:
Agent determination for step 0000000081 failed
Result og agent resolution does not agree with agents of task.
Any feedback you could provide would be greatly appreciated.
Thanks.
Mithun1. In Transaction PFTC, select Task Type = Standard Task and Task = 01000076
2. display the task details.
3. Now go to Additional data ->Agents Assignment->Maintain
4. Select the task here and click Attributes in the application tool bar.
5. Select the General Task radio button and hit transfer.
-- You have made your task general.
To Synchronise the runtime buffer ,simply excute T-Code SWU_OBUF and hit the Start Synchronization button. -
Error occurred in deployment step 'add solution' value cannot be null Parameter name: g
Hi!
I have a SharePoint Server 2013 with latest updates. Worflow Manager 1.0 installed and configured correctly. The server has a website, site temblate is Reacods Center. This site is default. On the site I created a blank Document library "TestLib"
If I create workflow in SharePoint Designer 2013, workflow works normally. Workflow set Title of element to "MyCustomTitle" and Write to History string "Done!".
If I create Empty Solution in Visual Studio 2013, insert into solution Workflow and make same actions, my solution at deployment step fails with error:
"error occurred in deployment step 'add solution' value cannot be null Parameter name: g"
Please, help me to resolve this problem?
Thanks!Hi,
What if stop this service, then start it again, perform an iisreset? It will make the change applied to the whole farm.
Also, you can check the ULS logs to see if there is any unexpected error occurs when deploying this solution.
About how to check the ULS logs:
http://blogs.technet.com/b/fesiro/archive/2013/11/11/sharepoint-logging-and-troubleshooting-using-ulsviewer.aspx
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
HI,
I am trying to create a VS 2012 based SharePoint 2013 workflow.
I added the workflow option. Under the sequence, i added a writetoHistory - "Started".
I tried to deploy the workflow. I am getting the below error:
Error 1: Error occurred in deployment step 'Activate Features': Microsoft.Workflow.Client.ActivityNotFoundException: The activity named 'WorkflowXaml_Guid from scope '/SharePoint/default/guid/guid' was not found. HTTP headers received from the
server -
ActivityId: guid.
NodeId: system Id.
Scope: /SharePoint/default/guid/guid.
Client ActivityId : 6b4be0b6-8569-4e20- 0 0 SharePointProject1
In the elements.xml of the workflow, I can see the below:
<Module Name="Workflow1" Url="wfsvc/guid">
<File Url="Workflow.xaml" Type="GhostableInLibrary" Path="Workflow1\Workflow.xaml" DoGUIDFixUp="TRUE">
<Property Name="ContentType" Value="WorkflowServiceDefinition" />
<Property Name="isReusable" Value="true" />
<Property Name="RequiresInitiationForm" Value="False" />
<Property Name="RequiresAssociationForm" Value="False" />
<Property Name="WSPublishState" Value="3" />
<Property Name="WSDisplayName" Value="Workflow1" />
<Property Name="WSDescription" Value="My 'Workflow1' Workflow" />
<!-- If you change the name or Url of your custom initiation or association form,
remember to update the corresponding property value (InitiationUrl or AssociationUrl) to match the new web relative url.
-->
<Property Name="RestrictToType" Value="List" />
<Property Name="RestrictToScope" Value="{$ListId:Lists/TestList;}" />
</File>
How to fix this?
ThanksHi,
We can do as follows:
1. Please check whether the workflow manager is working. We can create a basic custom workflow with SharePoint Designer 2013 and see if it works.
http://technet.microsoft.com/en-us/library/jj663115.aspx
2. The following similar threads for you to check it.
http://social.technet.microsoft.com/Forums/en-US/251a7977-13ba-4568-932d-eed55d5c2bfc/missing-workflow-xaml-feature-error-during-site-creation-from-custom-template?forum=sharepointadmin
http://social.technet.microsoft.com/Forums/en-US/0c470b4b-8e32-47ab-bc29-409db01dce81/unable-to-activate-the-workflow-feature-in-sharepoint-2013?forum=sharepointcustomization
More information:
Develop SharePoint 2013 workflows using Visual Studio
http://msdn.microsoft.com/en-us/library/jj163199%28v=office.15%29
Walkthrough: Creating and Debugging a SharePoint Workflow Solution
http://msdn.microsoft.com/en-us/library/ee231573(v=vs.110).aspx
Thanks,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Dennis Guo
TechNet Community Support -
Hi,
I'm unable to deploy a custom workflow/ visual web part or anything using Visual Studio.
Here is the Output trace:
------ Build started: Project: TestWorkflow, Configuration: Debug Any CPU ------
TestWorkflow -> E:\Codes\TestWorkflow\TestWorkflow\bin\Debug\TestWorkflow.dll
Successfully created package at: E:\Codes\TestWorkflow\TestWorkflow\bin\Debug\TestWorkflow.wsp
------ Deploy started: Project: TestWorkflow, Configuration: Debug Any CPU ------
Active Deployment Configuration: Default
Run Pre-Deployment Command:
Skipping deployment step because a pre-deployment command is not specified.
Recycle IIS Application Pool:
Recycling IIS application pool 'SharePoint - 1111'...
Retract Solution:
Retracting solution 'Testworkflow.wsp'...
Deleting solution 'Testworkflow.wsp'...
Add Solution:
Adding solution 'TestWorkflow.wsp'...
Deploying solution 'TestWorkflow.wsp'...
Activate Features:
Activating feature 'Feature1' ...
Error occurred in deployment step 'Activate Features': Attempted to perform an unauthorized operation.
========== Build: 1 succeeded or up-to-date, 0 failed, 0 skipped ==========
========== Deploy: 0 succeeded, 1 failed, 0 skipped ==========
Points to be noted:
I have opened the visual studio using the System Account and "Run as Administrator".
I checked the User policy for the particular web app and it has Full read and Full control for the System account
I checked SharePoint administration under services and verified the system account credientials.
Can you please help me solving this.
Thanks,
SachinPlease try giving permissions
pen the SharePoint 2010 Central
Administration.
- Go to Application Management
–> Change site collection administrations
- Select the correct site
collection and type your windows account as the secondary site collection administrator.
- Try deploying now, it should work.
or
You can grante permissions in "SITE ACTIONS > SITE PERMISSIONS"
Ref :http://learnsharepointwithme.blogspot.in/2013/04/error-occurred-in-deployment-step.html
Please remember to click 'Mark as Answer' on the answer if it helps you -
Error in Workflow for PR Overall Release
Dear SAP Fans,
I am getting error in workflow (WS20000077) after release of Purchase Requisition with first person and getting message in OutBox with the following errors and is unable to go to next person's Inbox for release PR.
Error when creating a work item
Error when processing node '0000000004' (ParForEach index 000000)
Error when creating a component of type 'Etapa'
Error when starting work item 000000392108
Agent determination for step '0000000004' failed
Error in resolution of rule 'AC20000026' for step '0000000004'
No configuration for workflow WS20000077 version 0001
Work item 000000392108: Object FLOWITEM method EXECUTE cannot be executed
How can I correct the above errors. Please help me !!!.
Thanks in advance,HI,
Just a thought,
Please check, If some one changed WF-USER password.
also check if the WF-USER is a Service user and not dialog user.
Regards,
-Venkat. -
Hi all,
I have a requirement, where automatic payment proposal goes for an approval process. When the proposal has created in the tcode F110 based upon user who has loged in a push button "Trigger Workflow" will appear once proposal is made (enchansment), When the user press this button workflow will be triggered using the function module. After that i am finding the approver details. After this step type, i am checking for the condition (payment or proposal) if it is proposal flow will proceed futher. After this i have used a fork step - two branches 1. for the workflow proceed further 2. cancle the workflow when and event "ZSAVE_ON_CLICK" (custome defined event) is triggered.
I am getting the error at this wait step. The error is ""Workflow 000000703573 wait step 0000000248: No valid object ID in container element 'ZbusF110'""
Thing i have done.
1. I check the binding, here i am passing two key values of the bo to my workflow container from the event container.
2. When i tried to bind the EVTOBJECT to zbusf110 - it is giving me an warining "'_EVT_OBJECT' is not an export element and hence sometimes has no defined value"
Kindly help me in solving this issue.
Thanks and Regards
Balaji K.It is working fine
-
Error in Workflow SWF_RUN535
Hi All,
we are having an issue in workflow, at a step where the system must send a notification (email), leveraging rule 00000168 (superior).
Can anybody advice / give some hints?
Thank you!
Error '9' when calling service 'SO_OBJECT_SEND'
Message no. SWF_RUN535
Diagnosis
A problem occurred when calling a service (for example, sending a mail). The service has transmitted the error code '9' to the calling program.
Procedure
Refer to your workflow system administrator.Hi
Run report HRALXSYNC and you will solve this.
We have faced this issue many times and the solution we have applied is
1. This issue occurs on a step that is dialog where some agent needs to either approver or reject.
2. You should check the rule (Agent determination rule in that step).
Run that rule with the workflow data (use scenario with which you are getting error).
Run the rule individually and check if you are getting right result.
this error most of the time id due to the fact that the rule is not be able to determine next processor of the workitem.
Error 9 when calling service SO_OBJECT_SEND SWF_RUN535
to assure you can hardcode the user for test in the rule and run the workflow as that is the most effective analysis that will help you determine the cause.
I have never seen this error on a background step unless there is a mail step involved.
You need to run the report HRALXSYNC to synchronize HR objects which will surely solve this issue.
regards
barin -
Error in Workflow for Parked Document (FV60)
Hi Workflow Experts,
I have a FI document parking Workflow scenario which is 3 level release that is if the amount is upto 10000 first person will release if it's more than that upto 20000 then second user has to release ,if more than that then third user will post.
For this i have activated the main workflow WS10000051 and for two level release i have activated the sub workflows WS10000052 for first level release and WS10000053 for secondlevel release and WS10000054 for thirdlevel release.
I have also done the Release strategy configuration in SPRO such as
in the following SPRO steps
1) Create Workflow Variant for Parking Document
2) Define Entry Screens for Parking Document
3) Assign Compaany Code to a Workflow variant for Parking Documents
4) Define Release Approval Groups for Parking Documents
5) Define Release Approval Path for Parking Doc
6) Assign Release Approval Path for Parking Documents
7) Assign Release Approval Procedure for Parking Doc
8) Define Users with Release Authorization for Parking Document. ( I have assigned the Position of CEO created in HR to this)
Now when the document is parked it throws the error
Error in workflow Customizing for document parking (tranasction OBWE) and it stops in the step Determining Sub Workflow.
Has anyone come across this issue.Please guide me in resolving in this issue, i am not able to identify whether this error is happening in workflow or due to some missed entries in SPRO settings of FI.
So please provide me how to do settings in SPRO For Parking, mainly in Tcode OBWE.
Regards,
SagarHi,
Your question is exactly same as below.
[Re: Error in FI Document Parking Workflow;
Hope you 've gone thru this link already, if not, pl. go thru the above link. Also, give us more details on the error you see on the wflow log, like you are not getting any wflow template ID in the cont.element "&ACTIVITY_000043_TASK&", This should have either WS10000052, 53 or 54 depending on the Amt. level. See if you are getting any value here. If not, then there is somethign wrong in your OBWE settings.
Also, sometimes, even though this step of "Determe Subworkflow" step works fine, if there is no proper agent assignment, then also, it cannot create work item for next step of Sub wflow and hence will error out.
Pl .check the above. May be a detailed error message from wflow log would help us out in suggesting better.
Goodluck
venu -
Excute workflow from step 3 by abap code
hI,
i want to excute workflow from step 3 by abap program. My workflow send mail from approval at 3 step.When approval is made then it will go for further processing.
please give me code if possible.
Regards,
Gurprit
Message was edited by:
GURPRIT BHATIA
Message was edited by:
GURPRIT BHATIAhi Guprit,
based on my experience you must trace why your workflow is wait.
is it because the workflow is waiting for certain events ?
or is it because of an error occured in the step 3 of the workflow ?
if the worfklow is waiting for certain events, you can force it to continue with triggering the events that workflow wait ( transaction code SWUE )
if an error occured in the step 3 of the workflow, you need to trace it what kind of error .... and for certain case after you fix the error you can continue the workflow by using tcode SWPR and restart the workflow after error.
but unfortunatelly based on my experience, some times the workflow just stuck in the middle of the process and no error occured
it this happens, ussually i re-triggered the workflow
hopes it helps
cheers -
Error: "The workflow could not delete the list item"
Have set up 2 lists: Events and EventsArchive. They have all the same fields. I have created a workflow in SPD using an impersonation step (I have Full control of the site/site collection). Workflow is essentially this:
If Curent Item:Expired
equals
Yes
Copy item in Current Item to
EventsArchive
then Delete item in
Current Item.
The item is copying over to the EventsArchive list just fine, but the "delete" part is not happening. Instead, I get the following error:
The workflow could not delete the list item. Make sure the list exists and the user has permissions to delete items in the list.
The list obviously exists (or I wouldn't be able to copy an item from it), and I have as much permissions as anyone can have, so I'm not sure where else to turn with this.
Thanks in advance for your help!Hi,
To test the issue, I create a simple workflow without using Impersonation step:
It works.
Could you please create new lists to avoid custom settings and test the issue again?
Similar thread:
https://social.msdn.microsoft.com/Forums/office/en-US/3fa94026-4487-4e4c-a5b4-12a79d6ee6a2/workflow-delete-item-not-working?forum=sharepointcustomizationprevious
Regards,
Rebecca Tu
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Hi,
I am deplyoing a solution which has custom web parts- vwp- appln pages, event receivers.
It was working fine till last week. I was able to deploy the solution and able to see the web parts and func. was working.
But now from the last 2 days onwards, when I tried to depoy this soution, I am getting the error
"Error occurred in deployment step 'Add Solution': A timeout has occurred while invoking commands in SharePoint host process "
may i know why am getting this error.
note: my dev machine- Win Srvr 2012 - VS 2012- SP 2013 - SP D 2013 was having soem issues with the space in C drive.
once i have done the index reset few months back and i started getting space in C:\ Drive is 0 bytes.
so what my infra. team has done is , increased the space in drive to 150 GB[ it was a VM ].
help is appreciated !What is current disk space on your drives
Delete ULS logs and other log files from server id not needed
could be related to ChannelOperationTimeout
http://msdn.microsoft.com/en-us/library/ee471440(v=vs.100).aspx
Also, don't forget to restart Visual Studio
Goto the following regustry key: HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools
Add the following as a DWORD (wont be there by default)
ChannelOperationTimeout
REG_DWORD that specifies the time, in seconds, that Visual Studio waits for a SharePoint command to execute. If the command does not execute in time, a SharePointConnectionException is thrown.
The default is 120 seconds.
http://social.technet.microsoft.com/wiki/contents/articles/21052.como-resolver-o-erro-error-occurred-in-deployment-step-activate-features-a-timeout-has-occurred-while-invoking-commands-in-sharepoint-host-process-pt-br.aspx
If this helped you resolve your issue, please mark it Answered -
Error 1 Error occurred in deployment step 'Activate Features': A timeout has occurred while invoking commands in SharePoint host process.
0 0 myProjectAssetsLists
am getting the above error when i deploy my farm solution which is actually a "farm solution import package" template.
i am deploying this to a new site collection and once its features are activated this will provision few doc libs and splists in the targeted site.
any help is appreciated.try below link:
http://msdn.microsoft.com/en-us/library/ee471440.aspx
http://sujeetrec.blogspot.in/2013/12/sharepoint-2010-deployment-timing-out.html
Increase the timeout that Visual Studio waits for SharePoint to deploy a feature:
Create: [HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\10.0\SharePointTools] ChannelOperationTimeout DWORD
The value is a timeout in seconds. The default is 120 (2 minutes).
Full details on this switch and others are here:
http://msdn.microsoft.com/en-us/library/ee471440.aspx -
Error in workflow while linking goods receipt document with parked invoice
Hi All,
I parked document using Tcode MIRO, when WF has been executed and goods receipt document has been created.At the time that we tried to link this goods receipt to parked invoice document in the workflow,The problem happens with work item saying the status as Error. See the below error.
MIRO Invoice: 801061193 2010 Item: 000001 13.09.2010 09:24:58 Error AP Workflow for MIRO/MIRA Parked Invoice
Can anyone advice why it is coming so?
Thanks in advance.Hi
In SWEL go to workflow trace and see what exactly is the error. This error description is too generic to arrive at soln.
Maybe you are looking for
-
Report to show Endpoint Protection last time updated?
Hello, I am trying to create a report to show the Endpoint Protection version and the last time it updated. I found this page of different views but non of them include last update: http://technet.microsoft.com/en-us/library/dn581986.aspx Does anyone
-
No Registration Using Adobe ID & Password!
I am in an administrator-priviledged user account in (x32) Win XP SP3, on the Internet. I have my Adobe ID and password in a spreadsheet that is open in one window. I open the newly purchased, installed, and activated Adobe Acrobat XI Pro in a
-
RAP Running flex+bridge back haul A radio will not turn on
Hardware: WLC 5508 running latest Software Version 8.0.100.0 AP Code : c1550-k9w8-xx.153-3.JA Description :Whilst running in flex+bridge mode and configured as a Root AP, the RAP back-haul A radio will not change to operationally UP. If the AP is cha
-
Edit in Photoshop "Grayed out"
I have Photoshop CS5 Extended and Lightroom 2.7. When selecting 5 images, right clicking on them and trying to edit them in Photoshop those features are grayed out. Actually all feature which should work with PS are grayed out, but Nik features work.
-
Can't Open Downloaded .bin
Let me preface this by saying that I didn't really know where to put this message, but I figured with the downloading and the program involved this was as good a shot as any. I'm a new mac user, so bare with me. I literally opened my macbook 2 hours