Error in workflow while triggering.

hi all .
I am facing a problem while triggering my workflow when i am changing the material no. In the SWEL it is showing only standard buisness object and not my object.
kindly help me in this matter.
thanxs in advance.

it is showing only standard buisness object and not my object
What do you mean by the above statement What is your Object
Check whether you have assigned START EVENTS in the workflow basic data or not
If you declare the start event of the workflow then you can see the Name Of the Receiver
Got to SWDD open your workflow definiton and then press CTRL+ F8 and there you can see a Start Events tab under that tab spcify the BO , BONAME and the EVENT CHANGED

Similar Messages

Error in workflow while linking goods receipt document with parked invoice

Hi All,
I parked document using Tcode MIRO, when WF has been executed and goods receipt document has been created.At the time that we tried to link this goods receipt to parked invoice document in the workflow,The problem happens with work item saying the status as Error. See the below error.
MIRO Invoice: 801061193 2010 Item: 000001 13.09.2010 09:24:58 Error AP Workflow for MIRO/MIRA Parked Invoice
Can anyone advice why it is coming so?
Thanks in advance.

Hi
In SWEL go to workflow trace and see what exactly is the error. This error description is too generic to arrive at soln.

CATS - error in workflow while releasing the time entry record

Dear Experts,
I have setup the configuration for CATS with approval along with workflow. I have maintained the Entry profile and also the Approval steps.
After entering the time sheet and while releasing the record, system is prompting to enter the user id, I have entered the user id and click OK button, system is producing the following error message:
An error occurred on starting the workflow
Message no. LR365
Diagnosis
For technical reasons, the system cannot start the SAP Business Workflow.
Procedure
Contact your system administrator.
I have activated the work flow customization using Trnx SWU3.
Can some one please help me out in solving this problem.
Thanks in advance,
Regards,
Praveen

I got the solution, we have to maintain the task TS31000004 as general task in the transaction PFTC - 31000004 -> Additional Data -> Agent Assignment -> Maintain, in the next screen GOTO -> Attributes (F8), then Change the task type to General task.
Also we have to create variant by name WORKFLOW for the program RCATSB01.
The above has solved my problem.
Thanks for support.
Praveen

Status error in workflow while changing personnel admin in pa30

HI,
I have created a leave request in PA30, so that a workflow has to trigger, for personnel admin i am using custom rule for agent selection. I am following error in inbox instead of work item.
Workflow 1712 set to status ERROR
Please repair the suspended workflow
Context Information:
ID: 1712
Work Item Text: hd
User: WF-BATCH
Language: E
SAP System: SCD
Client: 200
Press 'Execute' to display the workflow that has errors.

hi,
Thanks for the reply.
I am getting error messages as follows;
1. error when starting workitem 000000001791
2. error when processing node 0000000018
3. error when creating a component of type step
4. error when creatind a work item
5. agent determination for step 0000000018 failed
6. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATORGROUP&' for item
7. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
8. Error in the evaluation of expression '&EMPLOYEET<???>.ADMINISTRATOR.ADMINISTRATOR&' for item '10
9. Error when determining attribute 'ADMINISTRATOR' of object instance '[BO.EMPLOYEET.]'
10. Work item 000000001791: Object FLOWITEM method EXECUTE cannot be executed
The exceptions are,
process_node, create, create_wim_handle, create_via_wfm, execute, cl_swf_bnd_binding->execute, get_value_ref, eval_bor_atrrib_access-code.
I have used the method approveinteractive in task in custom workflow and also custom rule for agent selection. I did binding between the mentioned employeet.admingrp ,,, to the variables declared in rule container.

Error in workflow while rejecting shopping cart

Hi,
When i am using the standard 2 step shopping cart approval workflow WS1000031 the work item reaches the inbox of first level approver but when i reject the shopping cart the workflow goes into error. The error shown is (( Object CL_BBP_ACTION_NOTIFICATION_WF method SEND_PARAM_MESSAGE_WF cannot be executed )).
The standard task which gives the error is TS10407929 which is inside sub workflow WS10400026 which is again inside sub workflow
WS10400051.
Can you help me.
Reagrds
Moinak.

Hi,
Pls apply the note 987079.
BR,
Disha.
Pls reward points for useful answers.

Getting Error While Triggered the Internal Service Request Process Accelerator

Hi
I installed Oracle Process Accelerators(Internal Service Request and Employee On Boarding) PS6 in windows7.Installation was successful and I checked the installpa.log file there its showing "Build Successful" and then we assign the roles in BPM workspace and also put the security relams in in enterprise manager as per installation Document provided by the Oracle after that everything was fine to test the Internal Service Request(ISR) I triggered few instances but they terminated abruptly and giving these Errors in EnterpriseManager(EM)
while triggered ISR Error message that was shown in EM is
Non Recoverable Business Fault :
<bpelFault><faultType>1</faultType><operationErroredFault xmlns="http://xmlns.oracle.com/bpel/workflow/taskService"><part name="payload"><operationErroredFault xmlns="http://xmlns.oracle.com/bpel/workflow/taskService"><faultInfo>ORABPEL-30082 WorkflowServiceEngine request to another component failed. Request operation CallFunctionStateless from default/InternalServiceRequest!1.0/ManagerApproveRequest to ManagerApproveRequestRules_ManagementChainRuleSet failed with Business Fault: null. Check the underlying fault. Check target SOA component for cause. </faultInfo></operationErroredFault></part></operationErroredFault></bpelFault>
Non Recoverable Business Fault :
Attempted to access property 'id' in class 'oracle.bpel.services.identity.hierarchy.HierarchyPrincipal' with a null object reference. at line 292 column 34 in /Ruleset(ManagerApproveRequestRulesBase)/Function(CreateSupervisoryList)/Action[11]
if anybody who did this ever and facing the same issue can you please let me know as early as possible
Thanks and Regards
Rajesh.

Hi Phani,
Are you able to reproduce issue as below:
1. Login to Application as sysadmin.
2. Navigate to Intergrated SOA Gateway > Integration Repository.
3. Click on search on right hand side of the page.
4. In the Internal Name type "FND_USER_PKG" and click Go.
5. Click on the User link.
6. Under the "Web Service - SOA Provider", click in the "View WSDL". Copy the complete URL "http://test:8003/webservices/SOAProvider/plsql/fnd_user_pkg/?wsdl"
7. Open the soapUI.
8. Click File > new soapUI Project.
9. Test the web service.
If yes,
I think you might be need to execute a patch:
solution:
To implement the solution, please execute the following steps:
1. Download and review the readme and pre-requisites for iAS Patch 18855074.
Note: Above Merge Label Request (MLR) is build for EBS 12.1.3 having OC4J 10.1.3.5.
2. Enable the profile option "EBS Adapter for BPEL, Function Security Enabled".
a. Login as SYSADMIN user and Navigate to System >Profile and Search for "EBS Adapter for BPEL, Function Security Enabled" (Internal name :EBS_ADAPTER_FUNCTION_SEC_ENABLED)
b. Set the Value to 'Y' at SITE level . This means function security feature is enabled and all API calls for PL/SQL APIs, Oracle e-Commerce Gateway, and concurrent programs will be checked for user security before they are invoked.
3. Retest the issue by Generating and Deploying the required package.
4. Migrate the solution as appropriate to other environments.
Thanks
Ranjan

Error while triggering Synchrous outbound proxy

Hi,
While triggering synchronous outbound proxy from a abap program,it is throwing an system fault message. the system fault message is "Application Integration system error".
Please help me how to avoid this error.
My code is as below.
TRY.
    CALL METHOD proxy=>execute_synchronous
      EXPORTING
        output     = op_message
      IMPORTING
        input      = ip_message.
    CATCH cx_ai_system_fault into LO_SYS_EXCEPTION.
      CALL METHOD LO_SYS_EXCEPTION->IF_MESSAGE~GET_TEXT
        RECEIVING
          RESULT = TECHNICAL_EXCP_MESSAGE.
    CATCH cx_ai_application_fault .
ENDTRY.

Hi Ashwini,
Quite possible, there is something missing in the partner profile. There are several threads already in SCN with the same problem. Please refer below and see if it is helpful:
http://scn.sap.com/thread/319852
Entry in outbound table not found: Error Status... | SCN
Idoc Error Status "Entry in outbound table not found "
Regards,
Abhishek

Error handling workflow not getting triggered

Hi all,
I'm creating a outbound IDoc. And for error handling workflow.. I created a organization structure in PPOME and assigned users. I gave this position number thus created in the partner profile in post processing permitted agent tab.
But when the Idoc is in error, this is not coming to my inbox.
Can someone please help me with this.. and let me know what went wrong.
Thanks in advance.

Here you need to be careful,
if the agent assignment is not maintained properly, there may be a chance everyone in the organization will get the item.
I hope you have created a single workitem for error handling. goto additional data-> agent assignment-> maintain. make sure the attribute is defined as general forwarding allowed. or you maintain the role/position/user/whatever.as the possible agents. still you dont get the result, debugging the default rule in the task ->default rule -> agent.
hope this helps.
with regards,
Sudhahar R

1809: An error has occured while generating a seccion key for encryption

Hi
I am trying to perform a remote control operation using Console One
1.3.6c, but evry thime getting the following error message
"1809: An error has occured while generating a seccion key for
encryption." I had looked for it in Novell site & found that the fix is
to upgrade to ZDF 6.5 SP1, but I am looking for a diffrent work around
for it. Please let me know is there any work around for this problem.
Regard
Kallol
kallol

kallol,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Error in UWL while opening workitem

Hi All,
I have implemented a ESS package, have 2 standard workflows Claims and Leave.
I am getting error in UWL while opening workitem (advance claim) in inbox, error is as below:
Service cannot be reached
What has happened?
URL http://stest.hapl.com:8000/webdynpro/dispatcher/sap.com/essinclaims/ClaimAdvanceApproval_IN call was terminated because the corresponding service is not available.
Note
The termination occurred in system DBX with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:stest_DBX_00-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
UWL connection is fine as workflow is getting trigered and i can see work item in manager's inbox. I have created a dedicated template system for UWL with Web AS as ECC host:port number and Web AS path as /sap/bc/bsp/sap.
And maintained other connector and ITS properties and all connection test successully passed.
As we have only one sever so while creating system using load balacing template, was not able to identify message server name which is to maintained in case load balancing system.
Please help me finding out where can be the issue.
Thanks,
Honey
Thanks
Honey

When registering the system in UWL, specify a WebDynpro Launch System. That should resolve the issue.
WebDynpro Launch System -- create a system of type WAS and mention the WAS host name and WAS path.

Workitem button is not comming in swel though the workflow gets triggered

Dear All,
I have copied the std wf WS20000075 and doing customization for po release as per my clients requirement. Once PO is being created in ME21N i am able to see the event trace in SWEL , but its showing an error , " Import container contains errors (are any obligatory elements missing? " .and no workitem button is comming in SWEL so that i am not able to see the workflow log .
so that though the workflow gets triggered , i am not able to trace it .
I have gone through the solutions given in sdn , but i didn't get any solution for my issue.
Hope to get a positive solution for this soon.
Thanks
prabhudutta

This is error in ECC 6.0 for BUS2012.
For the time being I am using solution which I have given in this thread but rigid solution is to raise an OSS note.
I myself will raise an OSS but before would like to debug and find out what it is expecting exactly so i said use SWUE to find what went wrong.
Cheers
Jai
I am having the same error, it goes into error for ECC6.0 version. I have not got chance to see why it is happening?
any way for the time being you can do this : go to SWE2 and for given business object and receiver type, change the settings of "Behaviour upon error feedback" from "default" to "do not change linkage" so every time atleast event will trigger and so workflow, yeah ofcourse event will be queued in SWEAD. So final solution is an OSS
NOTE:
Check this thread, Glauco has given OSS note 797775
/thread/781604 [original link is broken]

Exception while triggering an action in consumer portlet.

Hi,
This following exception is noticed while triggering an action from consumer portlet in WSRP. Same request is working fine is standalone producer side application.
<env:Body>
<env:Fault xmlns:v1="urn:oasis:names:tc:wsrp:v1:types">
<faultcode>v1:OperationFailed</faultcode>
<faultstring>Http Error: [404] : [null].</faultstring>
<detail>
<v1:OperationFailed/>
<fd:FaultDetail xmlns:fd="urn:bea:wsrp:ext:v1:types">
<fd:created>2009-12-22T22:23:26.904+05:30</fd:created>
<fd:trace>com.bea.wsrp.faults.OperationFailedException: Http Error: [404] : [null].
     at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doGetMarkup(MarkupServiceHandler.java:425)
     at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doPerformBlockingInteraction(MarkupServiceHandler.java:718)
     at com.bea.wsrp.producer.handlers.markup.MarkupServiceHandler.doService(MarkupServiceHandler.java:241)
     at com.bea.wsrp.producer.handlers.AbstractServiceHandler.service(AbstractServiceHandler.java:68)
     at com.bea.wsrp.producer.container.ProducerEndPoint.processNow(ProducerEndPoint.java:242)
     at com.bea.wsrp.producer.wsee.ProducerEntryPoint.handleResponse(ProducerEntryPoint.java:87)
     at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.java:287)
     at weblogic.wsee.handler.HandlerIterator.handleResponse(HandlerIterator.java:271)
     at weblogic.wsee.ws.dispatch.server.ServerDispatcher.callHandleResponse(ServerDispatcher.java:341)
     at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:189)
     at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
     at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
Above log is captured using the WSRP monitor. If any one came accross this issue? Please help me in giving pointers to close this issue.

hi,
Was able to debug the issue. the problem is with the target JSP.
Some of the include statements in the target JSP are pointing to a wrong URI. so the request is failing in WSRP.
It looks silly but usefull. I overlooked this issue beacuse i am unable to find issues on producer side because of this.
cheers,
Vamsi

Error in workflow execution

Hiee friends ,
         I am new to workflow and learning it from sdn blogs and elearnings .
         My workflows were running fine but only recently there is a error every time i execute my workflow .
         Evertime i execute my workflow , a default output comes [its a output of one of my earlier workflows].
          I tried to create some new workflows but the same output is coming .
          Please help me out from here.
        Is there anyway to have the workflow configuration set to default ones.

Hi Lokesh,
Check who all are the recipient types for the Business Object event that is triggering your workflow. To check that do the following:
1. Go to t-code SWELS, activate the event trace.
2. Run your transaction and generate the BO event you are using as triggering event of your workflow
3. Go to t-code SWEL and check the recipient types of the BO event.
You can remove the event linkage to other workflows using t-code SWETYPV.
This would ensure that only the desired workflows are triggered when the BO event is generated.
Hope this helps!
Regards,
Saumya

Error "Approval workflow fragment has no user assignment"

Hi all,
We are implementing the workflow for n level approval of SC WS14000133.Now when we try to add adhoc approvers by clicking on the ADD APPROVER button,we get the foll error:
"Approval workflow fragment has no user assignment".
I have already referred similar threads on SDN and also the corresponding notes including this one,Error "Approval workflow fragment has no user assignment".The latest note for this error applies for SP08 while we are on SRM server 5.5(SP11).
Has anybody faced a similar issue before?Any inputs will be appreciated.
regards,
SRM Tech.

Hi SRM_TECH,
I am facing the issue. i am also in SRM5.5 and SP11. since i you are in the same SP level can you please help me out how did you fix this issue..
Thanks,
John.

When PO workflow is triggered i get the following mail to my inbox

Hi Experts,
When PO workflow is triggered i get the following mail to my inbox
Error processing following event linkage:
BUS2012 RELEASESTEPCREATED WS90000001
Following error occurred:
SWF_RUN 594
Message text:
Import container contains errors (are any obligatory elements missing?)
Event container appended as attachment.
Event linkage not changed.
Event stored temporarily.
Events can be redelivered via event queue
administration (transaction SWEQADM).
Please suggest me how to correct this error.
Regards,
Dheepak

Hi,
This happen when the release code value is not passing in to the Event Container.
Check the event Binding, Re-generate, Save & activate it.
See this [Thread|workflow inbox level given message Error in event receiver .;.
Regards,
Surjith

Error in workflow while triggering.

Similar Messages

Maybe you are looking for