Error In Wortk flow.

Hi All,
We are enabling the work flow for PO release strategy.The workflow is working fine for SA, but as per PO as concerned it is stopping at the Release Purchase order though we have released all the level as provided in the release strategy.
We have switched on trace by using SWEl,we found the following error message.Please help me out to resolve this issue.
Check FM ends with exception,
In binding i am getting relcode event, what is this, why this code has occurred.
Pls help me out.
Regards,
Santosh S Jajur

Hi ,
please refer to following threads-
PO Release wf -Check FM ends with exception
PO release workitem won't clear - 'Check FM ends with exception'
hope this helps.
thanks,
sahiba

Similar Messages

Error on Data Flow Task MSSQL 2012 Clustered "Description: The version of Lookup is not compatible with this version of the DataFlow. "

We have an SSIS package that runs on clustered MSSQL 2012 Enterprise Nodes that is failing. We use a job to executer the package.
Environmental information:
Product - Microsoft SQL Server Enterprise: Core-based Licensing (64-bit)
Operating System - Microsoft Windows NT 6.1 (7601)
Patform - NT x64
Version - MSSQL Version 11.0.3349.0
Package is set to 32 -bit. All permissions verified. Runs in lower environments, same MSSQL version. All environments are clustered. In the failing environment, all nodes are at the same service pack. I have not verified if all
nodes in the failing environment have SSIS installed. Data access is installed. We have other simpler packages that run in this environment, just not this one. Time to ask the community for help!
Error:
Source: Data Flow Task - Data Flow Task (SSIS.Pipeline) Description: The version of Lookup is not compatible with this version of the DataFlow. End Error Error: Code: 0xC0048020
Description: Component "Conditional Split, clsid {7F88F654-4E20-4D14-84F4-AF9C925D3087}" could not be created and returned error code 0x80070005 "Access is denied.". Make sure that the component is registered correctly. End Error
Description: The component is missing, not registered, not upgradeable, or missing required interfaces. The contact information for this component is "Conditional Split;Microsoft Corporation; Microsoft SQL Server; (C) Microsoft Corporation; All Rights
Reserved; http://www.microsoft.com/sql/support;0". End Error
(Left out shop specific information. This is the first error in the errors returns by the job history for this package. )
Thanks in advance.

Hi DeveloperMax,
According to your description, the error occurs when you execute the package with Agent job on clustered MSSQL 2012 Enterprise Nodes.
As per my understanding, I think this issue can be caused by you use SQL Server Agent to schedule a SQL Server Integration Services package in a 64-bit environment. And the SSIS package is referencing some 32-Bit DLL or 32-Bit drivers which are available
only in 32-bit versions, so the job failed.
To fix this issue, we should use the 32-bit version of the DTExec.exe utility to schedule the 64-bit SQL Server Agent to run a package. To run a package in 32-bit mode from a 64-bit version of SQL Server Agent, we can go to the Job Step dialog box, then
select “32 bit runtime” in the Advanced tab.
Besides, we should make sure that SQL Server Integration Services is installed on the failing environment.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Purchase Order error - Money Over flow error

Hi,
Our customer wants to create Purchase order for item that has Lenght, Width, Height dimentions (not defined in item master used directly in PO).
Width - 2500mm
Length - 2500mm
Height - 550mm
the quantity in PO is to be in Kilogram (KG) as the rate is Rs per KG. So when we put quantity as 9890 KG there is error
" Money Over flow, cannot display all digits"
Looking in more details , we found that there is volume field at row level in PO which system calculates,
volume = Length * width * height, (for 1 item) but when we add quantty system does
volume = (Length * width * height) * Quantity, the resulting value is more then 20 characters, inluding the commas.
We think this is reason for error,,,any one else faced similar situation and has solution for it.
can we stop system from calulating Volume or the way it calculates volume?
Please advice
Thanks,
- Abhijit.

Thanks Gordon,
Your reply helped me solve the problem, there is a VOlume unit field at row level on PO, changed the UoM there to "cm" instead of "mm" earlier/default. Now we can add the document.
Thanks.
- Abhijit.

DIG_Change_Message_Config error 6 over flow

I run into a problem when i develop in VB5, when i use DIG_Change_Message_Config function and use windows API handle, it show me error 6 over flow, anyone how to solve this problem.

hi,
overflow is a VB error. It may be that the handle that is being returned by the method, is causing the overflow..for example, if the handle returns a 32 bit long, and your variable is a short, then you may get this error...
What version of NI-DAQ and what card are you using ?
These knowledgebase links may help you...
(1) http://digital.ni.com/public.nsf/3efedde4322fef19862567740067f3cc/dc44689717e9040586256c8e0071922c?OpenDocument
and (2)
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3DF1756A4E034080020E74861&p_node=DZ52319&p_submitted=N&p_rank=&p_answer=&p_source=External
Nandan Dharwadker
Staff Software Engineer
Measurement Studio Hardware Team

Error in work flow wait for change event

Error in work flow wait for change event of business object bus1014, Actually this business object is triggering for two transaction one is me21n and another is c201 . am trying to create fork with two branches one is create and another if change occurs wait will trigger, bt when i trigger work flow controll is not after fork, it will stop in fork only. and am not getting my workflow container variable getting instantiate, am getting error in wait. please any one get out of me in this

Hi Sangeetha
What is LV_MATERIAL? is it a BO container element? or a class element or a just a simple variable?
Error message is clear, you are trying to evaluate LV_MATERIAL but it does not contain a value.
This is a custom workflow as it begins with WS9xxxxxxx... what is LV_MATERIAL used for? what are we expecting it to hold? maybe, from event to workflow binding we can pass the value to it.
Please share the following:
1) Definition screen shot of LV_MATERIAL
2) Screen shot of The step where it is first used - from SWDD
3) Screenshot of Event to Workflow Binding
4) name of your base Business Object (seen in the triggering events tab of the WF template in PFTC)
5) What is the corresponding variable for that BO in your workflow container
6) Screen shot of WF definition from SWDD - please identify the step going in error in that screen shot
Regards,
Modak

Error: "Invalid Sequence Flow: it connects a node located in main flow ...

I have a error in BPM flow:
Invalid Sequence Flow: it connects a node located in main flow (#1) to a node located in a Boundary Event flow (#2)
The component is a "Manual Activity" (#1) connected a "Human Task" (#2)
A another error with the same message is a "Exclusive Gateway" (#1) connected a another "Exclusive Gateway" (#2)
Can help me?

Thank you Jasmin and Diego. Your replies made me look carefully at my code and I found that I was not updating the repository with Document without the Policy added. I was doing the following:
RMSecureDocumentResult protectDoc = documentManager.protectDocument(unproctDoc, "yabby_traps_kill_platypus.pdf", policySet, lcPolicy.getName(), null, null, null);
r.getContent().setDataDocument(unproctDoc);
repositoryClient.updateResource(r.getPath(),r,false);
Instead I should have been doing the following:
RMSecureDocumentResult protectDoc = documentManager.protectDocument(unproctDoc, "yabby_traps_kill_platypus.pdf", policySet, lcPolicy.getName(), null, null, null);
r.getContent().setDataDocument(protectDoc.getProtectedDoc());
repositoryClient.updateResource(r.getPath(),r,false);

Error at Data Flow Task [OLE DB Destination [891]]

I am getting this error message not sure how to resolve this error
Error at Data Flow Task [OLE DB Destination [891]]: The column "Product Desc" cannot be processed because more than one code page (65001 and 1252) are specified for it.
Error at Data Flow Task [OLE DB Destination [891]]: The column "Brand Desc" cannot be processed because more than one code page (65001 and 1252) are specified for it.
Error at Data Flow Task [OLE DB Destination [891]]: The column "Seg Desc" cannot be processed because more than one code page (65001 and 1252) are specified for it.
Smash126

Hi Smash126,
Based on my research, I can reproduce the issue in my environment. The issue is caused by the CodePage of Input Columns "Product Desc", "Brand Desc" and "Seg Desc" are 65001, while the corresponding Destination Columns are 1252.
The Input Columns use more than one code page than the Destination Columns, so the error occurs.
To fix this issue, we can use a Derived Column Transformation to add three derived columns to convert the code page of the three columns. For more details, please see:
Drag a Derived Column Transformation before the OLE DB Destination and connect to it.
Add three Derived Columns with the same format like below:
Derived Column Name: Derived Column 1
Derived Column: <add as new column>
Expression: (DT_STR,50,1252)[Product Desc]
Double-click the OLE DB Destination, then select the “Derived Column 1” column from Input Column to make it map to the corresponding Destination Column which the original column “Product Desc” maps.
Use the same method for other two columns.
The following screenshot is for your reference:
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Conversion error in process flow

I've build a process flow with the following construction
1. Function call (DB) which returns a date via a OUT parameter (Checked)
2. Bound the OUT parameter to a Process-flow parameter of type date
3. Use the proces-flow parameter to bind a input parameter in a following mapping.
All is well in validation, generation and deployment, but upon running I stumble onto a conversion error. Somehow the process-flow parameter is represented in a format (2006-09-21 00:00:00.000000000 +02:00) which is not accepted in the mapping (tries to convert it using 'yyyy-mm-dd'). I cannot find the conversion in the coding.
I've tried to see if either in the mapping or in the process-flow I'm able to input the format of the date, but was not successful.
Anyone any idea

Chris,
Looks like a request has not got deleted properly from the table :
Options that you could look at :
1. Delete all the data from the ODS and load again ( if that is an option )
2. There are some entries you need to delete from the RSODSACTREQ table- but for this the suggestion would be to raise an OSS note for SAP to look into the same - we had a similar issue and raised an OSS note for the same and then got some notes from sap.
Also please mention your BI version and patch level.
Arun

Error in Order flow between COM to SOM

Hi,
We are facing some issues in order flow after submitting the order from CRM to OSM COM. What we observed that order gets created in COM, but not being created in SOM. In the logs, it is giving some resource xquery not found exception. We are using OSM 7.0.3 and using AIA PIP (O2A) to communicate between CRM to OSM COM/SOM.
This is the error message we are getting in the WL server log.
<ERROR> <0.0/om:on-CommunicationsSalesOrder-CommunicationsSalesOrder-state_change> <ExecuteThread: '14' for queue: 'oms.automation'> <[ order ID=338] Exception thrown while running Script resource [osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/OrderStateChangeHandler.xquery]; exception location: null>
net.sf.saxon.trans.XPathException: javax.xml.transform.TransformerException: Could not determine the last modified timestamp of "osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery" because it does not exist.. File[osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery (actual location resolved to [osmmodel:///CommunicationsSalesOrderFulfillmentPIP/1.0.0/resources/orderstate/OrderInProgressStateHandler.xquery]
     at oracle.communications.ordermanagement.rule.m.a(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.transform(Unknown Source)
     at oracle.communications.ordermanagement.rule.XQueryHelper.resolveAndtransform(Unknown Source)
     at oracle.communications.ordermanagement.extensionpoint.impl.a.runScript(OsmXQueryEngine.java:69)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.a(XQueryExtensionContextImpl.java:108)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.a(XQueryExtensionContextImpl.java:74)
     at oracle.communications.ordermanagement.extensionpoint.impl.e.callExtension(XQueryExtensionContextImpl.java:198)
     at oracle.communications.ordermanagement.extensionpoint.XQueryExtension.invoke(XQueryExtension.java:126)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at net.sf.saxon.functions.ExtensionFunctionCall.invokeMethod(ExtensionFunctionCall.java:690)
     at net.sf.saxon.functions.ExtensionFunctionCall.call(ExtensionFunctionCall.java:343)
     at net.sf.saxon.functions.ExtensionFunctionCall.iterate(ExtensionFunctionCall.java:224)
     at net.sf.saxon.expr.Expression.process(Expression.java:468)
     at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:688)
     at net.sf.saxon.instruct.Choose.processLeavingTail(Choose.java:686)
     at net.sf.saxon.instruct.Instruction.process(Instruction.java:93)
     at net.sf.saxon.instruct.ElementCreator.constructElement(ElementCreator.java:376)
     at net.sf.saxon.instruct.ElementCreator.evaluateItem(ElementCreator.java:322)
     at net.sf.saxon.expr.ExpressionTool.evaluate(ExpressionTool.java:296)
     at net.sf.saxon.expr.LetExpression.eval(LetExpression.java:339)
     at net.sf.saxon.expr.LetExpression.iterate(LetExpression.java:298)
     at net.sf.saxon.query.XQueryExpression.iterator(XQueryExpression.java:307)
     ... 32 more
The same scenario was working 2-3 days back, and there is no change in the deployment since then, now suddenly it is giving this error. Now today, it start giving the similar type of error in some of the customized cartridges as well (i.e. In those new created cartridges also, it is giving the issue of some .xquery file doesn't exist in the resource folder.
Could you please help me to find the cause for this issue.
Thanks,
~RS

OSM places the XQueries in the tmp folder.
We had a similar problem and it turned out that there was a script running on our machine which cleaned up the tmp folder at night. Maybe you are facing a similar issue.

Error in Process flow running in SQL owb_run_own.wb_rt_api_exec.run_task

Hi all
We are having issue with owb_run_own.wb_rt_api_exec.run_task using Sql Plus
When i try to run through Warehouse Builder Process flow ran Successfully
When i try to run through SQL Plus using owb_run_own.wb_rt_api_exec.run_task We are getting error
ORA-20099: ORA-20003: Process Flow FailedSerious <PROCEDURE_NAME >unknown error
RPE-02018: Oracle Workflow schema OWF_MGR on host OWD2HOST cannot be accessed using service OWDX.XXXX.XXXX through port 1523. Please check the location details and try again.
Can any one help please
Thanks in Advance
Edited by: user1849 on May 5, 2009 9:56 AM

Hi all
We are having issue with owb_run_own.wb_rt_api_exec.run_task using Sql Plus
When i try to run through Warehouse Builder Process flow ran Successfully
When i try to run through SQL Plus using owb_run_own.wb_rt_api_exec.run_task We are getting error
ORA-20099: ORA-20003: Process Flow FailedSerious <PROCEDURE_NAME >unknown error
RPE-02018: Oracle Workflow schema OWF_MGR on host OWD2HOST cannot be accessed using service OWDX.XXXX.XXXX through port 1523. Please check the location details and try again.
Can any one help please
Thanks in Advance
Edited by: user1849 on May 5, 2009 9:56 AM

Error during "Process Flow" deployment

Hello everyone,
I am having trouble deploying my first "Process Flow" object. I am using OWB 9.2 and WF 2.6.2 on Windows XP.
Here is the error I am getting:
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link DSRD_QA.US.ORACLE.COM@WB_LK_WF_LOADS. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
- ORA-04052: error occurred when looking up remote object OWBRR.WB_RTI_WORKFLOW_UTIL@DSRD_QA.US.ORACLE.COM@WB_LK_WF_LOADS
ORA-12545: Connect failed because target host or object does not exist
Here is what I have done so far based on what read in different posts on this forum (nothing seems to fix my problem):
o connect to SYS in the TARGET database (where OWF
schema was installed) and ran the following:
GRANT execute any procedure to owf_mgr
o I used "localhost" when I registered the WF object.
Then, as per one post, I changed it to "DNS name".
Did not help at all.
o Then, I tried to test the DB link (mentioned in the
error Msg above) and it DID NOT work. Then, as per
another post, I removed the part of host name that
appeared after the ".", i.e, DB.someplace.com to
DB. Then I ran a query using this DBLink and it worked
OK. Then I tried to deploy the WF object, it failed
with same error as above.
I am hoping someone will help me out on this issue - I have seen several posts with similar error messages and have tried almost all the solutions presented in there - nothing worked for me so far. Here is DB link definition:
ORIGINAL:
create public database link DSRD_QA.US.ORACLE.COM@WB_LK_WF_LOADS
connect to OWBRR identified by tiger using '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=CENTENNI-4F4322.CENTENNIALCOLLEGE.CA)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=DSRD_QA)))'
Changed:
create public database link DSRD_QA.US.ORACLE.COM@WB_LK_WF_LOADS
connect to OWBRR identified by tiger using '(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=CENTENNI-4F4322)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=DSRD_QA)))'
NOTE: HOST was chanegd to just DNS name (part after the "." was removed). Changed DBLink works fine - original one does not.
Thank you all in advance for your time and reponse!
Regards,
Amer

Hello Jean-Pierre,
I have tried almost what I could but I am still getting following errors when I try to deploy "process flow":
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link OWB92TRG.US.ORACLE.COM@WB_LK_WF_PKG2. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
- ORA-04052: error occurred when looking up remote object [email protected]@WB_LK_WF_PKG2
ORA-12545: Connect failed because target host or object does not exist
Most recent thing I tried was to run "catrpc.sql" script on the TARGET database using SYS.
I know you must be a very busy person but I would appreciate if you could try this in your env. Both my SOURCE and TARGET databases are local and I have installed all OWB and OWF repositories in the TARGET database. I have successfully deployed and executed OWB Mappings. Now I am stuck with OWF Process Flow deployment. This would perhaps be the last thing I need to do in order to be able to schedule ETL jobs through OWF.
All your help and time is highly appreciated.
Regards,
Amer

Error registering Process Flow Location

Hi
I've installed OWB 9.0.4 and successfully registered
Process Flow Location.
Then i've added russian lang to Oracle Workflow Repository
After that when i try to register Process Flow Location
i get error: RTC-5327 Schema OWF_MGR does not contain an
Oracle Workflow Repository.
But i still able to deploy Process Flow Packages
using earlier created Process Flow Location.
Thanks

Vasily,
This sounds like the known bug 2836447: OWB REPORTS OWF REPOS NOT INSTALLED IF MULTIPLE LANGUAGES ENABLED. The bug was fixed in 9.2 and also should be in the next 9.0.4 patch (9.0.4.11).
The workaround for now is to run the following in Workflow Schema (owf_mgr):
update
WF_RESOURCES
set
NAME = NAME || '_' || LANGUAGE
where
TYPE = 'WFTKN' and
NAME = 'WF_VERSION' and
LANGUAGE <> 'US';
commit;
The following removes the workaround and restores the WF_RESOURCES table to their original state. This should be applied when the fixed OWB client has been installed.
update
WF_RESOURCES
set
NAME = 'WF_VERSION'
where
TYPE = 'WFTKN' and
NAME LIKE 'WF_VERSION_%' and
LANGUAGE <> 'US';
commit;
Nikolai

ERROR deploying PROCESS FLOW

I encountered the following error while deploying
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow
Database Link STG1@WB_LK_LOAD_STG. Please check that "EXECUTE ANY PROCEDURE" privilege
is set and that the OWB Runtime is available.
- ORA-06550: line 1, column 7:
PLS-00201: identifier 'WB_RTI_WORKFLOW_UTIL.INITIALIZE@STG1@WB_LK_LOAD_STG' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
I set the "EXECUTE ANY PROCEDURE privilege to runtime repository schema as well as
runtime repository user. I still get the same error.
Please find below the steps I followed
1) Process Flows -> Locations
Created Process flow location with ORacle Work Flow and 2.6.2
2) Process Flows
Created Process Flow module
Created Process Flow Package
Created Process
validated sucessfully
generated XML code successfully
3) Deployment manager
Register the Process flow location in owf_mgr/Owf_mgr successfully
pre-deployment is successful
when deploying I encountered the above error.
I want to execute the process flow from deployment manager itself.
Please help me in solving this problem. URGENT !!
Thanks in advance
Shree

Hi Jean-Pierre,
Thanks for your help,
Grant WHAT to OWF_MGR user?
I couldnt find the package named 'WB_RTI_WORKFLOW_UTIL'
in OWF_MGR but I cound find 'WB_RT_WORKFLOW_UTIL' package in it.
Is this some problem in my OWF_MGR schema?
Any help will be greatly appreciated,
Thanks,
Shree

Error deploying process flows

hello, i'm trying to deploy process flows, getting this error. privileges on my workflow manager are set correctly but it looks like something is not ok with connection to database. workflow server looks ok and i can manage it through oracle workflow manager. everything else in owb works ok, i can deploy other objects with no problems.
this is only problem on my client computer, deployment works fine from server ?
any idea ?
already checked tnsnames, replaced host with ip, tnsping ok...
server: win2000
client win XP pro
oracle 9i: 9.2.0.4.0
owb: 9.2.0.2.8
owf: 2.6.2
ERROR:
RPE-02085: Failed to test wb_rti_workflow_util.initialize through deployed Workflow Database Link DW.US.ORACLE.COM@WB_LK_LOAD_SKL. Please check that "EXECUTE ANY PROCEDURE" privilege is set and that the OWB Runtime is available.
- ORA-04052: error occurred when looking up remote object
[email protected]@WB_LK_LOAD_SKL
ORA-12545: Connect failed because target host or object does not exist

Hi,
Do you happen to use localhost to refer to the Oracle Workflow engine? You should use a DNS entry to refer to the Workflow engine. The way this works: when Warehouse Builder deploys to Workflow, it creates a database link back, using a DNS lookup to the machine. If you specify a non-DNS entry, then whatever comes back will be different from what you specified as a host name. This causes the problem. Please re-register the Oracle Workflow engine using a DNS name entry.
Thanks,
Mark.

Error while process flow execution

Hi ,
I am getting the below error while runing a process flow.
I have owb11gr2
PKG_RUN_MAPPING_WITH_LOG:P_RUN_OWB_MAPPING_1
Error
ORA-01403: no data found
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 149
ORA-01403: no data found
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 245
ORA-06512: at "OWBSYS.WB_RT_API_EXEC", line 273
ORA-06512: at "ETL_CT.ETL_LOG", line 317
ORA-06512: at line 1
below query not of much help
select A.EXECUTION_NAME ,A.TASK_NAME ,A.TASK_TYPE ,A.OBJECT_NAME ,a.object_type ,A.CREATED_ON ,A.CREATED_BY ,A.UPDATED_ON ,A.UPDATED_BY
from ALL_RT_AUDIT_EXECUTIONS a
where trunc(a.created_on) = trunc(sysdate)
order by A.CREATED_ON desc
any suggestion ?
Edited by: WIP on Jun 6, 2012 3:20 PM

Did you deploy the mapping via OWB? Did you deploy all locations needed? If going the headless route where you can manually deploy the PLSQL, there is a bug fix for something in this area - if memory serves me well.
Cheers
David

Error In Wortk flow.

Similar Messages

Maybe you are looking for