Error in writing to directory /u01/tmp in SUSE 10

Hi all,
I am trying to install patch for oracle 9.2.0.6,
right now DB version is Oracle 9.2.0.4
but when i try to install i am gettng an error
oracle@icai-oracle:/bkp/patch/Disk1> ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be SuSE-7, redhat-2.1AS, redhat-2.1, UnitedLinux-1.0, redhat-3 or SuSE-8
                                      Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB.   Actual 10577 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 10244MB    Passed
Checking monitor: must be configured to display at least 256 colors    Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
Ignoring optional pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please wait ...
Error in writing to directory /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: SuccessI have performed all the steps
Earlier OUI was using /tmp dir and the permission for /tmp is 777
and persmission for /u01/tmp/ is also set 777.
but still i am getting error.....
pls suggest me how to resolve it...

user00726 wrote:
Hi all,
I am trying to install patch for oracle 9.2.0.6,
right now DB version is Oracle 9.2.0.4
but when i try to install i am gettng an error
oracle@icai-oracle:/bkp/patch/Disk1> ./runInstaller -ignoreSysPrereqs
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be SuSE-7, redhat-2.1AS, redhat-2.1, UnitedLinux-1.0, redhat-3 or SuSE-8
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB.   Actual 10577 MB    Passed
Checking swap space: must be greater than 150 MB.   Actual 10244MB    Passed
Checking monitor: must be configured to display at least 256 colors    Failed <<<<
Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
Ignoring optional pre-requisite failures. Continuing...
Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please wait ...
Error in writing to directory /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: SuccessI have performed all the steps
Earlier OUI was using /tmp dir and the permission for /tmp is 777
and persmission for /u01/tmp/ is also set 777.
but still i am getting error.....
pls suggest me how to resolve it...What about the rest of the same error message .. "and has atleast 60 MB of disk space.".
It appears you also have a problem with your DISPLAY variable, that would prevent the GUI portion of OUI from starting ...

Similar Messages

Error in writing to directory /tmp/

I am trying to run the Installer to install a 9.2.0.8 patchset and it continuously gives me the error message below.....
Could some please tell me what I am doing wrong.
There is plenty (11GB) of space. Permissions are set to 777 (on /tmp directory) and I have tried creating a new /tmp directory and exporting the path.
Sill not having any luck.
Tks much
Checking installer requirements...
Checking operating system version: must be B.11.11. Actual B.11.11
Passed
Checking swap space: must be greater than 150 MB. Actual 16384MB Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-06-11_11-54-24AM. Please wait ...
Error in writing to directory /tmp/OraInstall2010-06-11_11-54-24AM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
: No such file or directory
**************************************************************************************************************

Checking installer requirements...
Checking operating system version: must be B.11.11. Actual B.11.11
Passed
User is oradev for our DEV instance.
But here is something else that I am unclear about.
I have run this patch in March - upgraded to 9.2.0.8. So the software is already there.
We clone DEV (and TEST) every month - and each time we clone, v$version shows 9.2.0.8 - but dba_registry shows all components at 9.2.0.5 (which is I believe is normal since the system files are also cloned
Do I have to re-install the 9.2.0.8 binaries again (which is what I am trying to do now) or just run the catupgrd after opening the DB in strartup migrate mode?
Please help.
Thanks a lot

Error in writing to directory /tmp/OraInstall2009-05-06_10-44-05AM.

Hi,
Am trying to upgrade OID using 10.1.0.4 patch.How evr when am invoking the installer it is prompting the following error.
Checking installer requirements...
Checking operating system version: must be redhat-Red Hat Enterprise Linux AS release 4, redhat-2.1, redhat-5, SuSE-9 or UnitedLinux-1.0
Passed
All installer requirements met.
Checking Temp space: must be greater than 400 MB. Actual 9879 MB Passed
Checking swap space: must be greater than 1536 MB. Actual 33025MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Checking if CPU speed is above 450 MHz. Actual 1992 MHz Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-05-06_10-44-05AM. Please wait ...sh: /u02/oracle/product/OIM: No such file or directory
Error in writing to directory /tmp/OraInstall2009-05-06_10-44-05AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
[oracle@stcfmw02 install]$
Please anyone suggest on this!!!!
Thanks,
Arsh:)

For security reasons some admin put restrictions on the /tmp directory (for a good reason). You can change the default setting of the tmp directory used during installation by setting the environment variables TMP and TEMP to a different directory. Don't forget to set BOTH!!! variables.
HTH,
--olaf

Error in writing to directory /tmp/OraInstall2009-09-18_09-03-18AM. Please

Hi all,
oracle Unbrekable linux 32 bit
oracle 10.2.0.1
i got this error while installing oracle universal installer
[vishal@localhost database]$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-09-18_09-03-18AM. Please wait ...sh: /home/vishal/Desktop/database/install/unzip: Permission denied
Error in writing to directory /tmp/OraInstall2009-09-18_09-03-18AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success

Hi,
you try following steps:--
(1) create oracle user with oinstall and dba group.
(2) chown -R oracle:oinstall /install directory(like /diask1/app/oaradata/1020).
(3)chmod 775 /disk1/app/oradata/1020.
(4)chown -R oracle:dba /disk1/app/oradata/1020.
(5)chmod 775 /disk1/app/oradata/1020
(6) watch carefully the oracle check at the time of initial install.
If anything is failed due to gcc packeage or because of some other reason then you have to rectify first.
you also need to configure /etc/sysctl.conf for kernel parameter in which you have to define shmmax size half of the ram.
you also need to run xhost + from root and then start installation once u r done with the configuration.
Regards,
MK

Error in writing to directory /tmp/OraInstall2005...

./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 12195 MB Passed
Checking swap space: must be greater than 150 MB. Actual 3072 MB Passed
Checking monitor: must be configured to display at least 256 colors Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-07-26_03-48-00PM. Please wait ...
Error in writing to directory /tmp/OraInstall2005-07-26_03-48-00PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success

Please can help with this problem
[oracle@server1 oracle]$ /home/as/Disk1/install/runInstaller Starting Oracle Universal Installer...
Checking installer requirements...
All installer requirements met.
Checking Temp space: must be greater than 400 MB. Actual 133573 MB Passed
Checking swap space: must be greater than 1536 MB. Actual 1990MB Passed
Checking monitor: must be configured to display at least 256 colors Failed <<<<
>>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
Checking if CPU speed is above 450 MHz. Actual 2793 MHz Passed
Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n]
Continue? (y/n) [n] y
Preparing to launch Oracle Universal Installer from /oratmp/OraInstall2005-12-08_06-51-02PM. Please wait ...
Error in writing to directory /oratmp/OraInstall2005-12-08_06-51-02PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
regards
Abby

Error in writing to directory /tmp/OraInstall2007-08-27_12-58-31AM.

hi.
i am new to oracle installation. i set all parameters and environment values. when i entered runinstaller, i recieving this error message.
[oracle@localhost Disk1]$ ./runInstaller
Error in writing to directory /tmp/OraInstall2007-08-27_12-58-31AM. Please ensure that this directory is writable and has atleast 55 MB of disk space. Installation cannot continue.
: No such file or directory
[oracle@localhost Disk1]$
OraInstall2007-08-27_12-58-31AM. this folder was created in /tmp but no file inside.
help me to install oracle on linux (RH9) without any error.

Probably Oracle 10g (although you don't specify)
Putting Oracle9i and 10g on Red Hat 9 will require a LOT of tender loving care by someone who understands distributions, kernels, gcc and glibc. From the sounds of it, you are not current on Linux maintenance so I suggest you consider upgrading to a newer Linux - Fedora 6 or 7 are the replacement for RH9 and CentOS and Oracle Enterprise Linux are easier to use with Oracle.
But - in answer to your question: what happend when you
cd /tmp
df -k .
ls -ld /tmp

Error in writing to directory when installing Oracle9i

Hi, i am installing Oracle9i 64bit on a 64bit processor and when i run the installer and i get the following error:
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2006-12-07_02-38-41PM. Please wait ...
Error in writing to directory /tmp/OraInstall2006-12-07_02-38-41PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
I have checked the tmp directory and it has enough space and the directory is drwxrwxrwx
thanks

Check similiar discussion in Problem installing Oracle HTTP Server on Red Hat Enterprise Linux4 for APEX

"Error In Writing to directory ..." getting the error while installing oracle 10g in laptop

Hi
I thought I'd make my first post a hijack of a vaguely related thread,
then some kind moderator could separate it out and branch it off to a post of its own.
I'm not even sure this is in the proper forum.
But anyhow ...
i am getting problem while installing oracle 10g in laptop its showing error as "Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue.
so please tell me the solution as soon as possible
thanks,
arshad ayub

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

"Error In Writing to directory ..." getting the error during SOA 10g

Hi,
I am trying to install Oracle SOA suite 10g in windows 7.
But during installation it shows the message as below
"Error in Writing to Directory C:\Users\Accent.Muthu\Appdata\Local\temp\OraInstall2011-03-03-10-51-53 AM.
Please ensure that the directory is writable and has atleast of 45 MB of disk space.Installation can not continue."
I have all the access in the directory and has enough free space.
Please let me know the so;ution.
Thanks ,
lalit

Try the few resolutions mentioned here -
forms 10g installation error in writing to directory
Specially -
do not try to install from directory which has a space in its path
TMP and TEMP environment variables are set correctly, preferably to C:/tempRegards,
Anuj

Oracle 10G Linux runInstaller Error in writing to directory

RDBMS Version: 10.1.0.3.0
Operating System and Version: Enterprise Red Hat Linux 4.0
Linux runInstaller Error in writing to directory
Steps :-
1. Downloaded the Install 10.1.0.3 for Linux X86
2. Followed the Instructions as per B15521-01
3. When running runInstaller got below Error
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8or UnitedLinux-1.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2005-06-28_01-40-22PM/installActions2005-06-28_01-40-22PM.log
4. Found Patch 4153257 after unzipping the file and running as below got another error
$ ./runInstaller -paramFile /home/oracle/p4153257
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The Java RunTime Environment was not found at 0/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
5. Then Copied the oraparam.ini to the folder where the original oraparam.ini file was present ie /tmp/orcl/Disk1/install
6. After running the installer again got below error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_01-53-49PM. Please wait ...sh: /tmp/orcl/Disk1/install/unzip: No such file or directory
Error in writing to directory /tmp/OraInstall2005-06-28_01-53-49PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
7. Saw the Error that it was looking for unzip in /tmp/orcl/Disk1/install so Created a Soft link
8. Still the other Error exists ie as below. Well the DIR is created and oracle user has written files. So not sure why it says check disk space or directory is writable.
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_02-23-50PM. Please wait ...
Error in writing to directory /tmp/OraInstall2005-06-28_02-23-50PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
$ ls -al /tmp/OraInstall2005-06-28_02-23-50PM
total 40
drwxr-xr-x 3 oracle oinstall 4096 Jun 28 14:23 .
drwxrwxrwt 44 root root 4096 Jun 29 04:03 ..
-rwxr-xr-x 1 oracle oinstall 4036 Jun 28 14:23 command_output_27899
drwxr-xr-x 2 oracle oinstall 4096 Jun 28 14:23 images
-rwxr-xr-x 1 oracle oinstall 528 Jun 28 14:23 installActions2005-06-28_02-23-50PM.log

I am not sure what was wrong in the Initial download of the Install.
I did it again and this time it came properly and all the files in the install directory ie unzip was present and the Installer came up properly.

Error in writing to directory when installing

Hi, I encounter an error when installing Oracle 9.2.0.6 client on Window 2000 Professional machine. After I execute setup.exe about 3-5 secs, an error message is showed which displays "Error in writing to directory c:\docume~1\....\Temp\OraInstall2009-04-18_01_08_20PM. Please ensure that this directory is writable and has atleast 32MB of disk space.Installation can not continue.".
I tried a number of testings and am sure that the cause of this error is not like the surface desription of the message. The error is no reaseon triggerred by permission or disk space. In addition, the timing of the error happens is when the installation copy temp files to my OS temp directory. I have further googled much information and did some tries but still have no idea how to solve it. Can anyone give instrcution to solve this problem?
Thank in advance.

I find a document describing the problem I have in installation. The reference is
https://metalink.oracle.com/metalink/plsql/showdoc?db=NOT&id=433612.1&blackframe=1.
It says 2 work-arounds for the problem.
----------Extraced from the doc----------------------------------------------------------------------------------
As of 05-25-2007, this BUG is still unresolved. Two potential work-arounds exist:
Workaround #1
============
Keep 9.2.0.5 (or greater) patchset staging area, and use the runInstaller from the 9.2.0.5 (or greater) patchset staging area.
Workaround #2
============
To fix this in the $ORACLE_HOME, you can just edit the file $ORACLE_HOME/oui/oraparam.ini and update the value of the "JRE_LOCATION" with the actual value of <ORACLE_HOME>/jdk directory (upto and including the "jdk" directory).
About the first work-around, I don't know how to do. About the second one, I am confused, because the "$ORACLE_HOME/oui" path will be created after the installation is done. But I encounter error in installation. So, how can i edit the file "$ORACLE_HOME/oui/oraparam.ini."? In addition, I find oraparam.ini in the "disk1\install" path. And change the value of "JRE_LOCATION" to "C:\orahome\jdk" (My $ORACLE_HOME is "C:\orahome"). Howere, it doesn't work. I don't understand the meanings of the two work-arounds. Can anyone explain these to me or tell me where to get fruther information?
Thank in advance.

Error in writing to directory?

Hi Team
I format the Oracle DataBase and I am again installing
Oracle DataBase when i click setup .exe
It is showing an error message like
Error in writing to directory C:\DOCUM~1\ADMIN~1\.... . Oracle Universal Installer needs you to have permission in this area to install.
What to do?
Regards
Ora

Hi,
My first answer would be - change the permissions, the second change default TEMP directory for the user that you use to install Oracle. I think that the user used during Oracle installation on Windows should have local administrator privileges, so your error may suggest that you are using wrong user to perform the installation.
Regards,
Jarek

Error in writing to file '/u01/app/oracle/product/10.2.0/lib/libocr10.so'

I am in middle of Oracle 10.2.0.3 pachest installation and getting this error:
Error in writing to file '/u01/app/oracle/product/10.2.0/lib/libocr10.so'
I shutdown database and listenter prior to start of upgarde.
Any idea? OS AIX 5.2

hi,
>
create spfile='/u01/app/oracle/product/10.2.0/db_1/dbs'
2 from
3 pfile='/u01/app/oracle/product/10.2.0/db_1/admin/ora/pfile/initora.ora';
create spfile='/u01/app/oracle/product/10.2.0/db_1/dbs'
ERROR at line 1:have you startup the database in nomount stage with pfile.. if so.
then
create spfile form pfile='/u01/app/oracle/product/10.2.0/db_1/admin/ora/pfile/initora.ora';
use this command
a spfile will be created inside /dbs/
now restart the DB and give startup command and check the instance status..
as mentioned above export the Oralce_home and Oracle_sid..
regards,
Deepak

Oracle 9i install error in writing to temp file

Could someone please help?
I'm trying to install the Oracle 9i client (v.9.2) on windows xp, but getting this error:
"Error in writing to directory C:\DOCUME~1\user\LOCALS~1\Temp\OraInstall2005-09-15-xxxxxxx". Please ensure that this directory is writable and has atleast 32 MB of disk space. Installation cannot continue.
I deleted the install on the temp folder, there is more than enough space to write (over 20gb free hd space). I'm lost on how to fix it, and have wasted far too much time trying to get it to work. Please help!!!

You could set TEMP and TMP temporarily in a DOS box :
set TEMP=<temp_directory>
sert TMP=<temp_directory>
Then start setup.exe out of this DOS box.
Unfortunately there are reported many possible reasons for this error, including bugs.
Maybe this metalink note could help:
Note:71919.1
Subject: Debugging the Oracle Universal Installer(OUI) on Windows

PRCI-1113 : Directory /u01/app/grid/product/11.2.0/gridhome does not exist

Hi All,
I have installed Clusterware 11gR2 on two node cluster Solaris 10 U9 SPARC.
After that I run Oracle Database installer and clicked next.
In Installation Options I checked ""Create and Configure Database".
After that I got the error message:
PRCI-1113: Directory /u01/app/grid/product/11.2.0/gridhome does not exist
and OUI terminate.
Information from logs:
INFO: Completed background operations
INFO: Moved to state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: InstallOptions UI Entering & Exiting processInput
INFO: Validating view at state <installOptions>
INFO: Completed validating view at state <installOptions>
INFO: Validating state <installOptions>
INFO: Completed validating state <installOptions>
INFO: InstallOptionsAction Actions.transition called
INFO: selectedInstallOption is :INSTALL_DB_AND_CONFIG
INFO: inventory location is/u01/app/oraInventory
INFO: Is CRS Installed true
INFO: inventory location is/u01/app/oraInventory
WARNING: Error while invoking SRVM..
Refer associated stacktrace #oracle.install.driver.oui.SRVMInstallExceptionHandler:384
SEVERE: [FATAL] PRCI-1113 : Directory /u01/app/grid/product/11.2.0/gridhome does not exist.
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:385
[root@gt1000a /u01/app/oraInventory/logs]#
Please help me resolve that issue.
Regards,
Daniel

For clusterware I am using grid user and for Oracle database oracle user.
Here is the output from env command:
[root@gt1000a /export/home/11g]# env
MANPATH=/usr/share/man:/opt/VRTS/man:/usr/dt/man:/usr/man:/usr/openwin/share/man
DTSOURCEPROFILE=true
TERM=xterm
SHELL=/bin/bash
SDT_NO_TOOLTALK=1
GTK_RC_FILES=/etc/gtk/gtkrc://.gtkrc-1.2-gnome2
WINDOWID=96471252
OLDPWD=/tmp/deinstall2011-09-10_12-04-39-AM/logs
DTHELPSEARCHPATH=//.dt/help/root-10.182.43.169-0/%H://.dt/help/root-10.182.43.169-0/%H.sdl://.dt/help/root-10.182.43.169-0/%H.hv://.dt/help/%H://.dt/help/%H.sdl://.dt/help/%H.hv:/usr/dt/appconfig/help/%L/%H:/usr/dt/appconfig/help/%L/%H.sdl:/usr/dt/appconfig/help/%L/%H.hv:/usr/dt/appconfig/help/C/%H:/usr/dt/appconfig/help/C/%H.sdl:/usr/dt/appconfig/help/C/%H.hv
LC_ALL=ja_JP.PCK
USER=root
DTDEVROOT=
XFORCE_INTERNET=True
OPENWINHOME=/usr/openwin
DTXSERVERLOCATION=remote
XMBINDDIR=/usr/dt/lib/bindings
GNOME_KEYRING_SOCKET=/var/tmp/keyring-I5BqD8/socket
SESSION_MANAGER=local/gt1000a:/tmp/.ICE-unix/12267,inet6/gt1000a:32901,inet/gt1000a:32902
SESSION_SVR=gt1000a
HELPPATH=/usr/openwin/lib/locale:/usr/openwin/lib/help
MAIL=/var/mail/root
PATH=/usr/sbin:/usr/bin:/usr/openwin/bin:/usr/ucb:/sbin:/usr/sbin:/opt/VRTS/bin:/opt/VRTSvxfs/sbin:/opt/VRTSdbed/bin:/opt/VRTSob/bin:/opt/VRTScps/bin:/opt/VRTSvcs/bin:/opt/VRTSodm/bin:/usr/lib/vxvm/bin:/usr/sfw/bin:/usr/ccs/bin
LC_MESSAGES=ja_JP.PCK
PWD=/export/home/11g
START_SPECKEYSD=no
EDITOR=/usr/dt/bin/dtpad
DTAPPSEARCHPATH=//.dt/appmanager:/usr/dt/appconfig/appmanager/%L:/usr/dt/appconfig/appmanager/C
LANG=ja_JP.PCK
TZ=Japan
SDT_NO_DTDBCACHE=1
XFILESEARCHPATH=/usr/openwin/lib/locale/%L/%T/%N%S:/usr/openwin/lib/%T/%N%S
PS1=[\u@\h \w]#
SESSIONTYPE=altDt
HOME=/
SHLVL=2
DTSCREENSAVERLIST=StartDtscreenSwarm StartDtscreenQix StartDtscreenFlame StartDtscreenHop StartDtscreenImage StartDtscreenLife StartDtscreenRotor StartDtscreenPyro StartDtscreenWorm StartDtscreenBlank
GNOME_DESKTOP_SESSION_ID=Default
G_FILENAME_ENCODING=@locale,UTF-8
LOGNAME=root
AB_CARDCATALOG=/usr/dt/share/answerbooks/ja_JP.PCK/ab_cardcatalog
DTDATABASESEARCHPATH=//.dt/types,/usr/dt/appconfig/types/%L,/usr/dt/appconfig/types/C
XMICONSEARCHPATH=//.dt/icons/%B%M.pm://.dt/icons/%B%M.bm://.dt/icons/%B:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B
DTUSERSESSION=root-10.182.43.169-0
DISPLAY=10.182.43.169:0.0
GTK_IM_MODULE=iiim
XMICONBMSEARCHPATH=//.dt/icons/%B%M.bm://.dt/icons/%B%M.pm://.dt/icons/%B:/usr/dt/appconfig/icons/%L/%B%M.bm:/usr/dt/appconfig/icons/%L/%B%M.pm:/usr/dt/appconfig/icons/%L/%B:/usr/dt/appconfig/icons/C/%B%M.bm:/usr/dt/appconfig/icons/C/%B%M.pm:/usr/dt/appconfig/icons/C/%B
G_BROKEN_FILENAMES=yes
dtstart_sessionlogfile=/dev/null
COLORTERM=gnome-terminal
_=/usr/bin/env
[root@gt1000a /export/home/11g]#
oracle user profile:
[root@gt1000a /export/home/11g]# cat /export/home/oracle/.bash_profile
export ORACLE_BASE=/u01/app/oracle
export GRID_HOME=/u01/app/grid/product/11.2.0/gridhome
export GRID_BASE=/u01/app/gridbase
export CRS_HOME=/u01/app/grid/product/11.2.0/gridhome
export CRS_BASE=/u01/app/gridbase
export ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
export ORACLE_SID=orcl
export LANGUAGE_ID=JAPANESE_JAPAN.JA16SJIS
export NLS_LANG=JAPANESE_JAPAN.JA16SJIS
export LD_LIBRARY_PATH_64=$ORACLE_HOME/lib
export LD_LIBRARY_PATH=$ORACLE_HOME/lib32
export CLASSPATH=:/JRE:/jlib:/rdbms/jlib:/network/jlib
export PATH=$PATH:/u01/app/oracle/product/11.2.0/db_1/bin:/u01/app/grid/bin
[root@gt1000a /export/home/11g]#
Edited by: nagardd on Sep 15, 2011 8:07 AM

Error in writing to directory /u01/tmp in SUSE 10

Similar Messages

Maybe you are looking for