Error in writing to PSA

HI Experts,
Currently i am working in SAP 3.5 version, when i am running the infopackage i am getting the error "Error in writing to PSA, RSM2 851" and "Error 5 When adding to PSA, RSAR 130" when i deleted the same request and re-executed the same step again the data load in sucessfull,
Can some one suggest what to do for this problem,
Please remember that i am working in SAP BW 3.5 version,
Thansk,

pls activate your Infosource again.... also did u check st22 for any short dump

Similar Messages

  • " Error when inserting in PSA table RSTSODSPART" when loading into PSA

    Hello,
    Did anyone encounter something similar, and found a solution ?
    BI 7.0 -  EnhP 1 - SP5
    When loading data from R/3 into PSA, we encounter following error message:
    " Error when inserting in PSA table RSTSODSPART"
    ===============================================================
    - the first datapackage is written successfully to PSA,
    but from the second datapackage onwards the error message pops-up
    " Error when inserting in PSA table RSTSODSPART"
    - The original dataselection in the infopackage is somewhere stored
    If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
    it stil starts loading according the original selection (the month)
    - If we create a new InfoPackage and select very few data (only one datapackage)
    then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
    - We remarked that:
    Two versions of the PSA exist for that datasource 0FI_GL_40:
    a Table(/BIC/B0000555000) in version 1 exists,
    a Table(/BIC/B0000555001) in version 2 exists
    Thanks in advance,
    Best regards

    Hello All,
    We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
    RSM2 851 - Error when writing in PSA (Caller 32)
    RSAR 130 - Error 7 when adding to PSA (Caller 70)
    We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
    This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
    Vince Vajda

  • Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18

    Adobe Media Encoder (Error compiling movie) Unknown error when writing to Isilon OneFS 6.5.5.18 while using Adobe Premiere Pro.
    Process:         Adobe Premiere Pro CC 2014
    Path: /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier: com.adobe.AdobePremierePro
    Version:         8.1.0 (8.1.0)
    Code Type: X86-64 (Native)
    Parent Process: launchd [2538]
    Responsible:     Adobe Premiere Pro CC 2014
    Date/Time: 2015-01-06 14:04:23.500 -0700
    OS Version:      Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Crashed Thread: 55  Dispatch queue: com.apple.root.default-priority
    Exception Type: EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    Customer created test export with 777 permissions and set mount parameters to the following:
    mount_nfs -o vers=3,tcp,rdirplus,intr,nolocks,async,rsize=32768,wsize=32768
      -- Original mount options:
         General mount flags: 0x40 async
         NFS parameters: vers=3,tcp,nolocks,rsize=32768,wsize=32768,rdirplus
      -- Current mount parameters:
         General mount flags: 0x4000058 async,nodev,nosuid multilabel
         NFS parameters: vers=3,tcp,port=2049,nomntudp,hard,nointr,noresvport,negnamecache,callumnt,nolocks,quota, rsize=32768,wsize=32768,readahead=16,dsize=32768,rdirplus,nodumbtimr,timeo=10,maxgroups=16 ,acregmin=5,acregmax=60,acdirmin=5,acdirmax=60,nomutejukebox,nonfc,sec=sys
    The pcap shows once the movie is created a lockup call is responded from Isilon with Error: NFS3ERR_NOENT
    478         V3 CREATE Call (Reply In 479), DH: 0xea5f731c/QBRSN-0-0-1.mov Mode: UNCHECKED
    479         V3 CREATE Reply (Call In 478)
    484         V3 LOOKUP Call (Reply In 485), DH: 0xea5f731c/._QBRSN-0-0-1.mov
    485        V3 LOOKUP Reply (Call In 484) Error: NFS3ERR_NOENT
    V3 LOOKUP Reply (Call In ....) Error: NFS3ERR_NOENT  -   This is by design of OneFS, we coalesce files and then flush them out to disk which is why the commit time is accurate but the file is not immediately available. however when an async option is used within the mount options this should be avoided if writing asynchronously to the cluster.  Has anyone else seen this behavior lately? (current workaround is to store locally and transfer to the cluster via Finder)

    That error can happen for many reasons...one of the reasons that I occassionaly get it is because I try exporting a movie to an external drive that has been formated in the old FAT32 instead of the NTSF standard.  FAT32 only allows for file sizes up to 2 gigs.  And as soon as it reaches that...I would get that error.  I don't know if that is why you are getting that error...but it would be easy to check.  1) are you generating a file that is over 2 gigs?  2) is your drive that you are exporting to FAT 32 (just right click the drive in My Computer and select "properties" then just look for what it says next to "file system".

  • Error reading/writing file "com.garageband.cs":`≤Ć». message

    Hey all! Don't know if anyone can help but I keep getting the message...
    " Error reading/writing file "com.garageband.cs":`≤Ć». " with a cancel button.
    If you click on it it does go away, but after a time playback starts skipping and stuff.
    Anyone help please?
    Thanks
    Righini

    first two things to try for “oddball” probs:
    http://www.bulletsandbones.com/GB/GBFAQ.html#oddballprobs
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Error reading/writing file message when opening garageband and/or files

    I've been recently getting this message when I open garageband and files
    "Error reading/writing file\U201Ccom.apple.garageband.cs\U201D
    I've been in and repaired disk permissions and all that it says it is all fine, reinstall garageband and message still comes up, weird.
    not only is garageband being a nuisance, Mac OS X 10.6.2 is being a pain when shutting down telling me to restart the computer. This only happened since upgrading to 10.6. No one as yet knows this promble so I'm gonna have to ring apple and see what is going on here.
    and also my other problem is that mac doesn't seem as snappy anymore I noticed this before upgrading to 10.6 and made no difference when "cleanly" installing 10.6. I get a colour wheel popping up and i'm having to wait with simple tasks. iMac only 2 years old.

    i give up with this discussion forum no no one knows anything

  • EXPORT XFA error while writing XFA files

    Hello Experts,
    We are facing an error while exporting to PDF from BEx report.
    We are on EP7 SP14. BI on SP16.
    After the report is displayed and Export to PDF button is clicked, a new window opens which shows following:
    1. Error:
    Message: No message was provided.
    Stack trace: java.lang.NullPointerException
    at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
    at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
    at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
    at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
    at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
    at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
    at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
    at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
    at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
    :33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Message: EXPORT XFA error while writing XFA files
    Stack trace: com.sap.ip.bi.base.exception.BIBaseRuntimeException: EXPORT XFA error while writing XFA files
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:311)
    at com.sap.ip.bi.export.xfa.widthcalc.WidthCalculator.<init>(WidthCalculator.java:55)
    at com.sap.ip.bi.export.xfa.impl.SizeCalculator.calc(SizeCalculator.java:96)
    at com.sap.ip.bi.export.impl.ExportController.calculateAndSetSizes(ExportController.java:626)
    at com.sap.ip.bi.export.impl.ExportController.doExportPrep(ExportController.java:405)
    at com.sap.ip.bi.export.impl.ExportController.convert(ExportController.java:325)
    at com.sap.ip.bi.export.controller.ExportResult.createExport(ExportResult.java:71)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.createPDF(PageExportRenderingRootNode.java:593)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.doExport(PageExportRenderingRootNode.java:132)
    at com.sap.ip.bi.webapplications.pageexport.PageExportRenderingRootNode.processRendering(PageExportRenderingRootNode.java:349)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.buildRenderingTree(Page.java:4494)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRenderingRootNode(Page.java:4568)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRendering(Page.java:4204)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4150)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:2948)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.processRequest(Page.java:2794)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.doProcessRequest(Controller.java:994)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller._processRequest(Controller.java:883)
    at com.sap.ip.bi.webapplications.runtime.controller.impl.Controller.processRequest(Controller.java:860)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService._handleRequest(BIRuntimeService.java:359)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.services.BIRuntimeService.handleRequest(BIRuntimeService.java:276)
    at com.sap.ip.bi.webapplications.runtime.jsp.portal.components.LauncherComponent.doContent(LauncherComponent.java:24)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
    at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
    at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
    at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
    at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
    at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
    at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
    at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at
    com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java
    :33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: java.lang.NullPointerException
    at com.sap.ip.bi.export.model.layout.impl.Margins.<init>(Margins.java:32)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.<init>(CellLayout.java:48)
    at com.sap.ip.bi.export.model.layout.impl.CellLayout.dub(CellLayout.java:57)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.createCell(TableContentIterator.java:170)
    at com.sap.ip.bi.export.xfa.xftextensions.TableContentIterator.next(TableContentIterator.java:104)
    at com.sap.ip.bi.export.xfa.xftextensions.TableSubFormSet.writeXFD(TableSubFormSet.java:1189)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_subform.writeXFD(Xft_subform.java:1604)
    at com.sap.ip.bi.export.xfa.core.Xft_template.writeXFD(Xft_template.java:216)
    at com.sap.ip.bi.export.xfa.core.Xft.writeXFD(Xft.java:62)
    at com.sap.ip.bi.export.xfa.impl.Document.writeWidthsAsXmlToStream(Document.java:294)
    2. Message:
    No metadata is available for "DISABLE_NAVIGATION":
    <parameterList>
      <param name="BI_COMMAND_TYPE" value="OPEN_DIALOG_DISABLE_NAVIGATION"/>
      <param name="TARGET_DIALOG_REF" value="DISABLE_NAVIGATION"/>
    </parameterList>
    In this window, complete screen of report is displayed as an image instead of PDF.
    Please let me know if anybody faced similar issue earlier.
    It was working perfect earlier, but suddenly error started.
    regards
    Kedar Kulkarni

    No proper findings, but issue resolved.
    Problem i found that we got a domain change and service values were not refreshed until we apply new patch.
    So when we applied patch level 6 on BI WEBAPP& BI BASE S URL for ADS got refreshed and we faced the issue.
    After resetting the URL to new domain problem got resolved.
    Regards
    Kedar Kulkarni

  • Error in writing to file

    Hai,
    I am installing Oracle9.2.0 on my RH8.0 system. I got an error like this after running runInstaller: Error in writing to file: .../oracle/jre/1.3.1/bin/i386/native_threads/java
    Someone know a solution for this ?
    thx
    ramesh

    Your error has been completely addressed here http://www.puschitz.com/InstallingOracle9i.html. This is very informative. You may want to check this out before proceeding. The straight solution to this is when this error shows up, leave it open, find the native_threads/java file from the CD to the directory Oracle is asking for this. I had this problem and it turned out when I extracted and burnt it to a CD, it didn't copy the native_threads directory and others, so you want to check this as well.
    Del

  • Error in Writing to File \Winnt\System32\mfcans32.dll

    Error window with msg "Error in Writing to File \Winnt\System32\mfcans32.dll" is being popuped while trying to install 9.0.3 on windows 2000 Advanced Server.
    My System Configuration Details are as follows.
    Compaq Proliant
    Ram : 2GB
    HARD DISK : 80GB
    PROCESSOR : 2.6
    Please help me to install.
    Thanks,
    Srinivas Chowdhary Annamareddy.

    You might want to investigate why it became Read-Only in the first place and are there any other files that should not be Read-Only read only.

  • Error while writing wsdl file

    Hi,
    i' m working on jdeveloper 10.1.3.1.0 and when i want to add a partner link to my BPEL project i get 'error while writing wsdl file' 'exception null' error then i couldn't create file.
    so how can i solve this problem?
    HELP:)

    Once the wrapper procedure is created by the adapter, the adapter does a second search to obtain the information about the wrapper (i.e. parameters, their data types, etc.). What's likely happening here is that the wrapper is getting created, but the adapter can't find it. The XSD is based on the wrapper, so if it can't be found, then no XSD can be generated. Try removing the existing wrapper package or choose that option in the wizard when it generates a new one.

  • Error in writing to directory /u01/tmp  in SUSE 10

    Hi all,
    I am trying to install patch for oracle 9.2.0.6,
    right now DB version is Oracle 9.2.0.4
    but when i try to install i am gettng an error
    oracle@icai-oracle:/bkp/patch/Disk1> ./runInstaller -ignoreSysPrereqs
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be SuSE-7, redhat-2.1AS, redhat-2.1, UnitedLinux-1.0, redhat-3 or SuSE-8
                                          Passed
    All installer requirements met.
    Checking Temp space: must be greater than 80 MB.   Actual 10577 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 10244MB    Passed
    Checking monitor: must be configured to display at least 256 colors    Failed <<<<
        >>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Ignoring optional pre-requisite failures. Continuing...
    Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please wait ...
    Error in writing to directory /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : SuccessI have performed all the steps
    Earlier OUI was using /tmp dir and the permission for /tmp is 777
    and persmission for /u01/tmp/ is also set 777.
    but still i am getting error.....
    pls suggest me how to resolve it...

    user00726 wrote:
    Hi all,
    I am trying to install patch for oracle 9.2.0.6,
    right now DB version is Oracle 9.2.0.4
    but when i try to install i am gettng an error
    oracle@icai-oracle:/bkp/patch/Disk1> ./runInstaller -ignoreSysPrereqs
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be SuSE-7, redhat-2.1AS, redhat-2.1, UnitedLinux-1.0, redhat-3 or SuSE-8
    Passed
    All installer requirements met.
    Checking Temp space: must be greater than 80 MB.   Actual 10577 MB    Passed
    Checking swap space: must be greater than 150 MB.   Actual 10244MB    Passed
    Checking monitor: must be configured to display at least 256 colors    Failed <<<<
    Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Ignoring optional pre-requisite failures. Continuing...
    Preparing to launch Oracle Universal Installer from /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please wait ...
    Error in writing to directory /u01/tmp/OraInstall2009-07-20_11-31-12AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : SuccessI have performed all the steps
    Earlier OUI was using /tmp dir and the permission for /tmp is 777
    and persmission for /u01/tmp/ is also set 777.
    but still i am getting error.....
    pls suggest me how to resolve it...What about the rest of the same error message .. "and has atleast 60 MB of disk space.".
    It appears you also have a problem with your DISPLAY variable, that would prevent the GUI portion of OUI from starting ...

  • Error in writing to directory /tmp/

    I am trying to run the Installer to install a 9.2.0.8 patchset and it continuously gives me the error message below.....
    Could some please tell me what I am doing wrong.
    There is plenty (11GB) of space. Permissions are set to 777 (on /tmp directory) and I have tried creating a new /tmp directory and exporting the path.
    Sill not having any luck.
    Tks much
    Checking installer requirements...
    Checking operating system version: must be B.11.11. Actual B.11.11
    Passed
    Checking swap space: must be greater than 150 MB. Actual 16384MB Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-06-11_11-54-24AM. Please wait ...
    Error in writing to directory /tmp/OraInstall2010-06-11_11-54-24AM. Please ensure that this directory is writable and has atleast 69 MB of disk space. Installation cannot continue.
    : No such file or directory
    **************************************************************************************************************

    Checking installer requirements...
    Checking operating system version: must be B.11.11. Actual B.11.11
    Passed
    User is oradev for our DEV instance.
    But here is something else that I am unclear about.
    I have run this patch in March - upgraded to 9.2.0.8. So the software is already there.
    We clone DEV (and TEST) every month - and each time we clone, v$version shows 9.2.0.8 - but dba_registry shows all components at 9.2.0.5 (which is I believe is normal since the system files are also cloned
    Do I have to re-install the 9.2.0.8 binaries again (which is what I am trying to do now) or just run the catupgrd after opening the DB in strartup migrate mode?
    Please help.
    Thanks a lot

  • Error in writing to directory /tmp/OraInstall2009-05-06_10-44-05AM.

    Hi,
    Am trying to upgrade OID using 10.1.0.4 patch.How evr when am invoking the installer it is prompting the following error.
    Checking installer requirements...
    Checking operating system version: must be redhat-Red Hat Enterprise Linux AS release 4, redhat-2.1, redhat-5, SuSE-9 or UnitedLinux-1.0
    Passed
    All installer requirements met.
    Checking Temp space: must be greater than 400 MB. Actual 9879 MB Passed
    Checking swap space: must be greater than 1536 MB. Actual 33025MB Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
    Checking if CPU speed is above 450 MHz. Actual 1992 MHz Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-05-06_10-44-05AM. Please wait ...sh: /u02/oracle/product/OIM: No such file or directory
    Error in writing to directory /tmp/OraInstall2009-05-06_10-44-05AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    [oracle@stcfmw02 install]$
    Please anyone suggest on this!!!!
    Thanks,
    Arsh:)

    For security reasons some admin put restrictions on the /tmp directory (for a good reason). You can change the default setting of the tmp directory used during installation by setting the environment variables TMP and TEMP to a different directory. Don't forget to set BOTH!!! variables.
    HTH,
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Error in writing to directory /tmp/OraInstall2009-09-18_09-03-18AM. Please

    Hi all,
    oracle Unbrekable linux 32 bit
    oracle 10.2.0.1
    i got this error while installing oracle universal installer
    [vishal@localhost database]$ ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-09-18_09-03-18AM. Please wait ...sh: /home/vishal/Desktop/database/install/unzip: Permission denied
    Error in writing to directory /tmp/OraInstall2009-09-18_09-03-18AM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success

    Hi,
    you try following steps:--
    (1) create oracle user with oinstall and dba group.
    (2) chown -R oracle:oinstall /install directory(like /diask1/app/oaradata/1020).
    (3)chmod 775 /disk1/app/oradata/1020.
    (4)chown -R oracle:dba /disk1/app/oradata/1020.
    (5)chmod 775 /disk1/app/oradata/1020
    (6) watch carefully the oracle check at the time of initial install.
    If anything is failed due to gcc packeage or because of some other reason then you have to rectify first.
    you also need to configure /etc/sysctl.conf for kernel parameter in which you have to define shmmax size half of the ram.
    you also need to run xhost + from root and then start installation once u r done with the configuration.
    Regards,
    MK

  • Error in writing to directory /tmp/OraInstall2005...

    ./runInstaller
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Checking Temp space: must be greater than 80 MB. Actual 12195 MB Passed
    Checking swap space: must be greater than 150 MB. Actual 3072 MB Passed
    Checking monitor: must be configured to display at least 256 colors Passed
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-07-26_03-48-00PM. Please wait ...
    Error in writing to directory /tmp/OraInstall2005-07-26_03-48-00PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success

    Please can help with this problem
    [oracle@server1 oracle]$ /home/as/Disk1/install/runInstaller Starting Oracle Universal Installer...
    Checking installer requirements...
    All installer requirements met.
    Checking Temp space: must be greater than 400 MB. Actual 133573 MB Passed
    Checking swap space: must be greater than 1536 MB. Actual 1990MB Passed
    Checking monitor: must be configured to display at least 256 colors Failed <<<<
    >>> Could not execute auto check for display colors using command /usr/X11R6/bin/xdpyinfo. Check if the DISPLAY variable is set.
    Checking if CPU speed is above 450 MHz. Actual 2793 MHz Passed
    Some optional pre-requisite checks have failed (see above). Continue? (y/n) [n]
    Continue? (y/n) [n] y
    Preparing to launch Oracle Universal Installer from /oratmp/OraInstall2005-12-08_06-51-02PM. Please wait ...
    Error in writing to directory /oratmp/OraInstall2005-12-08_06-51-02PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    regards
    Abby

  • Error in writing to directory when installing Oracle9i

    Hi, i am installing Oracle9i 64bit on a 64bit processor and when i run the installer and i get the following error:
    Starting Oracle Universal Installer...
    Checking installer requirements...
    Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
    Passed
    All installer requirements met.
    Preparing to launch Oracle Universal Installer from /tmp/OraInstall2006-12-07_02-38-41PM. Please wait ...
    Error in writing to directory /tmp/OraInstall2006-12-07_02-38-41PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
    : Success
    I have checked the tmp directory and it has enough space and the directory is drwxrwxrwx
    thanks

    Check similiar discussion in Problem installing Oracle HTTP Server on Red Hat Enterprise Linux4 for APEX

Maybe you are looking for