Error In XI Adapter Framework

Hi All,
I am getting the following error in sxmb_moni, other interfaces are working fine only for one of the scenarios this error is coming.
Scenario: BPM<->SOAP
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: java.net.ConnectException: Connection timed out: connect</SAP:AdditionalText>
I have refreshed the cache.
Please help me with this
Thanks,
Abhishek.

hi
Also, try to do a complete cpa cache refresh with this URL and authenticate with the XIAFUSER:
http://host:port/CPACache/refresh?mode=full
And finally, have a look in the troublshooting guide, which might contain something useful (it's really well done
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283
Note: reward points if solution found helpfull
Regards
Chandrakanth.k

Similar Messages

Why were no attributes in the Error received from Adapter Framework (AF)?

Hi All,
We have a local processing scenario where we use the Integration Configuration through Advanced Adapter Engine to download attachment using Sender Mail Adapter from Lotus Notes Mail and Upload the file attachment into an FTP using Receiver File Adapter. As part of our testing we deliberately set the Sender Mail Adapter to produce error by changing the configuration like setting a wrong URL to simulate downtime on Lotus Notes. The error shows up in the RWB CommChannel and an error record is received from AF to send Alert. When the alert tries to find the alert rule it is unable to do so because the condition (Component, Interface and Namespace) values are empty "*Find rule for (From:::: To::::)" This is from the report SXMSALERT_LOGREADER.
The (From:::: To::::) should contain the Sender Component, Interface and Namespace as FROM, and Receiver Component, Interface and Namespace as TO but they are not picked up from the Mail Adapter because there are no message/payload yet but I am expecting at least the Component to be included.
The result of the empty (From:::: To::::) will be a "*No matching rule found" and no alert is sent.
Do anyone had the same issue? Is this a possible bug in PI?
Please let me know if you need additional detail.
Regards,
Orlando

Hi Orlando,
When the sender channel reads any message, it would be able to determine the Sender service, Interface and namespace from Sender agreement. It is not dependent on the payload.
To generate the alert for such, you can modify the alert rule to check only for the Sender serice, interface and namespace.
Hope this helps.
Regards,
Sanjeev.

Alerts not getting triggered from Adapter Framework

Hi,
I have done the following steps for the Alerting:-
1. In configuration of RWB, activated monitoring for XI integration server & XIAdapterFramework and set the monitoring level to 'HIGH'.
2. Scheduled the Report 'SXMSALERT_PROCESS_DATA_GET' on ABAP stack.
3. In the 'further settings' link in End-to-End monitoring, activated the monitoring and set the frequency.
4.Created an alert category using t-code 'ALRTCATDEF' and assigned fixed users(myself) to it.
5.Defined an alert rule with '*' in all conditions and 'No restrictions' for the question 'Where did the error occur'.
Finally after all the steps:-
I am able to receive the alerts in the inbox -
a) by running the test report 'RSALERTTEST'
b) from a control step in BPM.
However, alerts are not getting triggered for an error in the Adapter Framework. (an exception in the Adapter Channel)
When i debugged the SXMSALERT_PROCESS_DATA_GET report, there was step where it was looking for process instances in table 'SSPICSPRHD' which was empty and the alert error log said -
 No process instances found for process type ID: 26460B43EB934C4C9ABBE9627380A89E ( XIDomain: domain.00.hqdvsapxi01 )
Any help/hint is welcome !!!
Thanks & Regards,
Renjith.

Hi,
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/wlg/1382. [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken]
I think this blog will be of help to you..
Cheers,
Divya

Exception in Adapter Framework

Hi,
I'm receiving the following error from my Adapter Framework:
Exception caught by Adapter Framework: Cannot lookup the ra connectionfactory. Reason: Path to object does not exist at XXXXX, the whole lookup name is deployedAdapters/XXXXXX
This error occurs in the 'delivering' step from Integration Engine to Adapter Enging: messages continue staying in that status. When I restart the Adapter Engine, the message are set to System Error, so I can work around it, but I'm more interested in why this error occurs.
I'm using a XI 3.0 system, SP 17.

Hi
the adapter has to register in JNDI with the name "deployedAdapters/sample_ra/shareable/sample_ra" as you have specified in ra.xml.
check whether the SPIManagedConnectionFactory,java file and the SampleRA.xml file, the JNDI name in both the files is deployedAdapters/sample_ra/shareable/sample_ra.
The JNDI name should be:
deployedAdapters/com.sap.aii.adapter.sample.ra/shareable/com.sap.aii.adapter.sample.ra
Check the name in NWA: Problem Management -> JNDI Browser.
Adjust your adapter metadata accordingly.
Thanks

Error on Adapter Framework with Seeburger component

Hi,
I have the Generic EDI component from Seeburger Adapter, and I have a communication channel using the FTP Adapter from Seeburger with the module localejbs/Seeburger/solution/generic-edi, and when execute the communication channel, I have an error with the solution, the error is:
"Exception caught by adapter framework: Path to object does not exist at solution, the whole lookup name is localejbs/Seeburger/solution/generic-edi.".
I see the Seeburger documentation about installation and configuration from FTP Adapter, but I don´t find information about this error, somebody help me please with information about this error, what configuration I need review or where find documentation about this problem?.
We post a note about this problem on the OSS, the content of the note is:
We have installed the Seeburger's FTP adapter in SAP XI.
A communication Channel is calling this adapter nd executing a module called localejbs/Seeburger/solution/generic-edi. When the adapter is called the next error is shown;
Exception caught by adapter framework: Path to object does not exist at
solution, the whole lookup name is localejbs/Seeburger/solution/generic-edi.
Delivery of the message to the application using connection
FTP_http://seeburger.com/xi failed, due to:
com.sap.aii.af.ra.ms.api.RecoverableException: Path to object does not
exist at solution, the whole lookup name is
localejbs/Seeburger/solution/generic-edi.:
com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at solution, the whole lookup name is
localejbs/Seeburger/solution/generic-edi..
Also, the host-ftp solution was used instead of the generic-edi with the same result.
The system we have is SAP PI 7.0 SPS09 with Seeburger 1.6.
Thanks and greetings,
Hervey.

Hi,
I have the same problem. What was the solution?
Regards
Kristian

Regarding error showing as exception caught by adapter framework

hi all.
here in my scenario iam doing a file to rfc.
but when iam sending a file to rfc and when i see in sxmb_moni its showing as sucess.
bue when i look at runtime workbench under message monitoring (tab) it was showing as
MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
SO WHAT COULD BE THE ERROR IS THE EROR THAT WS SHOWING RELATED TO XI R SAP R3(system that was recieving)
waiting for the excellent answer.
cheers.
seeta ram.

HI Matias.
yes i did with the custom Rfc and the result is still the same
and to be more confident i was creates another xi scenario from file to Standerd Bapi BAPI_COMPANYCODE_GETDETAIL by creating a simple file with only one field and mappedwith only the request Message type of this Bapi and tested it.
and even this scenario is also showing the same in reciever rfc and under runtime work ench its showing the same as my old scenario and it is as follows
2007-10-15 10:47:51 Success Message successfully received by messaging system. Profile: XI URL: http://jssxid0:50000/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2007-10-15 10:47:51 Success Using connection RFC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2007-10-15 10:47:51 Success Message successfully put into the queue.
2007-10-15 10:47:51 Success The message was successfully retrieved from the receive queue.
2007-10-15 10:47:51 Success The message status set to DLNG.
2007-10-15 10:47:51 Success Delivering to channel: ReceieverChannel_RFC
2007-10-15 10:47:51 Success MP: entering
2007-10-15 10:47:51 Success MP: processing local module localejbs/RfcAFBean
2007-10-15 10:47:51 Error MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
2007-10-15 10:47:51 Error Exception caught by adapter framework: Exception thrown in method process. The transaction is marked for rollback.
Time Stamp Status Description
2007-10-15 10:47:51 Error Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Exception thrown in method process. The transaction is marked for rollback.: com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback..
2007-10-15 10:47:51 Success The asynchronous message was successfully scheduled to be delivered at Mon Oct 15 10:52:51 SAST 2007.
2007-10-15 10:47:52 Success The message status set to WAIT.
2007-10-15 10:52:52 Success Retrying to deliver message to the application. Retry: 1
2007-10-15 10:52:52 Success The message was successfully retrieved from the receive queue.
2007-10-15 10:52:52 Success The message status set to DLNG.
2007-10-15 10:52:52 Success Delivering to channel: ReceieverChannel_RFC
2007-10-15 10:52:52 Success MP: entering
2007-10-15 10:52:52 Success MP: processing local module localejbs/RfcAFBean
2007-10-15 10:52:52 Error MP: exception caught with cause com.sap.engine.services.ejb.exceptions.BaseTransactionRolledbackLocalException: Exception thrown in method process. The transaction is marked for rollback.
and the message in sxmb_moni shows as it is processed sucessfully and
at reciever rfc as
Receiver channel 'ReceieverChannel_RFC' for party '', service 'CD103' (internal name 'RfcClient[ReceieverChannel_RFC]')
Client data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=103, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=mandapativ, jco.client.sysnr=00, jco.client.ashost=168.89.182.33}
Repository data: {jco.client.lang=en, jco.client.snc_mode=0, jco.client.client=103, jco.client.passwd=******, jco.webas.ignore_jdsr_error=1, jco.client.user=mandapativ, jco.client.sysnr=00, jco.client.ashost=168.89.182.33}
Current pool size: 0, maximum pool size : 1
waiting for your great answer.
cheers.
seeta ram.

Message status "Holding" - Message monitoring adapter framework

Hello,
We have some messages with the status "Holding" in a queue in the message monitoring in the adapter framework.
Normally you have to restart the first message of that queue. The message with the status "system error". Unfortunately this message is not available anymore because it is older than 30 days and the retetion period is 30 days.
I already read the blog about "[How to deal with stuck EOIO messages in the XI 3.0 Adapter Framework|http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417100)ID1887311350DB01819286872323159351End?blog=/pub/wlg/3566]"
The blog does not mention what to do when the first message (sequential number) is not available anymore.
Is it possible to restart the messages in the queue in that case?
Thanks
Kind regards
Frank

Unfortunately this message is not available anymore because it is older than 30 days and the retetion period is 30 days.
I assume that the message was deleted.....in this case the next message in the queue will be blocking the queue....so try resending this message....even the blog mentions that you either solve the error or cancel the message....so now start from the second message....if possible solve the error for this message....if not possible to resolve then cancel it so that rest of the queue gets processed
From the blog:
Now the erroneous message is the first message in the display. You can look at the error reason, try to fix the problem and
resend or cancel the message to release the queue.
Regards,
Abhishek.

PI 7.11: Adapter Framework caught exception: null

Hi,
I've a ABAP Proxy - to - SOAP scenario.
Message mapping works.
In the communication channel monitor I get the following error:
MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
Adapter Framework caught exception: null
In the log viewer in NWA I see the following two messages:
Marked transaction for rollback for meesage 516e304f-b083-8e3e-e100-00000a01095f(INBOUND). Reason: <null>
Caught exception com.sap.engine.interfaces.messaging.api.exception.MessagingException from application code with msgKey: 516e304f-b083-8e3e-e100-00000a01095f(INBOUND)
The payload for calling SOAP receiver looks like that:
<m:setEmployee xmlns:m="http://test.com" xmlns:fo="http://www.w3.org/1999/XSL/Format">
 <ns1:e xmlns:ns1="http://test.com">
 <address_Mail_Incoming_Type>
 <email>test.com</email>
 <phone>7890</phone>
 </address_Mail_Incoming_Type>
 <badge_ID>123</badge_ID>
 <cost_Center>321</cost_Center>
 <date_Hired>1980-01-01T00:00:00.000Z</date_Hired>
 <date_Of_Birth>1950-01-01T00:00:00.000Z</date_Of_Birth>
 <department>123</department>
 <division>ABC</division>
 <employee_Category>A</employee_Category>
 <employee_Code>1000</employee_Code>
 <employee_Id>1000</employee_Id>
 <employee_Status>ACTIVE</employee_Status>
 <first_Name>A</first_Name>
 <last_Name>B</last_Name>
 <letter_code_3>FRI</letter_code_3>
 <location>123</location>
 <position>123</position>
 </ns1:e>
 </m:setEmployee>
When I copy this payload into SOAP UI (surrounded by <soapenv:Envelope>, <soapenv:Header> and <soapenv:Body>), the WS call works.
The URL for the receiving CC should be ok (same as in SOAP UI), the "Do not use SOAP Envelope" checkbox is not flagged.
What can be the reason for that error message?
Thanks in advance!

I've now changed the setting of the external definition to "Using RPC style", but I'm still running into the same error than before:
10.02.2012 14:51:03 Information SOAP: sending a delivery error ack ...
10.02.2012 14:51:03 Error Adapter Framework caught exception: null
10.02.2012 14:51:03 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException
10.02.2012 14:51:03 Information SOAP: sent a delivery error ack
10.02.2012 14:51:03 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
The payload of the CC looks exactly the same than before:
<?xml version="1.0" encoding="UTF-8"?>
<m:setEmployee xmlns:m="http://test.com" xmlns:fo="http://www.w3.org/1999/XSL/Format">
 <ns1:e xmlns:ns1="http://test.com">
 <address_Mail_Incoming_Type>
 <email>test.com</email>
 <phone>123</phone>
 </address_Mail_Incoming_Type>
 <badge_ID>123</badge_ID>
 <cost_Center>123</cost_Center>
 <date_Hired>1990-01-01T00:00:00.000Z</date_Hired>
 <date_Of_Birth>1950-01-01T00:00:00.000Z</date_Of_Birth>
 <department>123</department>
 <division>ABC</division>
 <employee_Category>PERM</employee_Category>
 <employee_Code>1000</employee_Code>
 <employee_Id>1000</employee_Id>
 <employee_Status>ACTIVE</employee_Status>
 <first_Name>A</first_Name>
 <last_Name>B</last_Name>
 <location>ABC</location>
 <position>123</position>
 </ns1:e>
</m:setEmployee>
If I copy that payload (without <?xml version="1.0" encoding="UTF-8"?>) into SOAPUI (surrounded by SOAP envelope), the WS call works without any problem.
Why doesn't it work from PI?
Another question:
Why is it putting <ns1:e> into the payload of the new interface and <ns0:e> for the existing interface (which is working, see Re: PI 7.11: Adapter Framework caught exception: null)?
Could that be the reason why data is not sent properly to the SOAP receiver?

Error in AS2 adapter. Object not found in lookup of as2.. Its urgent..!!

Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName                                                       Module Key
localejbs/Seeburger/solution/as2                              solutionid
localejbs/ModuleProcessorExitBean                          exit
ModuleKey    ParameterName         ParameterValue
exit                JNDIName     deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success     MP: Processing local module localejbs/Seeburger/solution/as2
Error :   MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.

Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup

Error in JMS Adapter:

Receiving the below error, thought of JMS Drivers problems undeployed and re-deployed several times, but still problem persist in XI.
Success     MP: Processing local module localejbs/SAP XI JMS Adapter/ConvertMessageToBinary
2010-09-09 11:45:21     Error     MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.
2010-09-09 11:45:21     Error     Exception caught by adapter framework: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.
Error     Delivery of the message to the application using connection JMS_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Path to object does not exist at SAP XI JMS Adapter, the whole lookup name is localejbs/SAP XI JMS Adapter/ConvertMessageToBinary..
2010-09-09 11:45:22     Success     The message status set to WAIT.
2010-09-09 11:45:22     Success     The asynchronous message was successfully scheduled to be delivered at Thu Sep 09 11:50:21 CDT 2010.
The JNDI Libraries are available in Visual Admin, not sure what else causing the issue. Any guru's help is appreciated

XI 3.0 SP20
Regarding the note, that only applied below sp4. We are on SP20. The default values appears but those are not working.This seems to be a problem with Dev only, Q and P is working fine at this moment
If i actually delete module processor's from Sender and Receiver channel, things are working fine. But not sure if it is going to break anything. And this needs to be applied in all landscape. But i have to present a reason, why this weird behavior all of a sudden
Sender
    SAP XI JMS Adapter/ConvertJMSMessageToBinary
    SAP XI JMS Adapter/ConvertBinaryToXMBMessage
Receiver
    SAP XI JMS Adapter/ConvertMessageToBinary
    SAP XI JMS Adapter/SendBinarytoXIJMSService

Error File FTP adapter

Hi,
 We need to connect to a VAN system to poll/post files. We have configured the file adapter in FTP mode, but when trying to post/poll for files, we are getting the following error:
2009-10-09 07:17:57 Error File processing failed with An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor.
2009-10-09 07:17:57 Error Adapter Framework caught exception: An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor.
2009-10-09 07:17:57 Error Transmitting the message to endpoint <local> using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: An error occurred while connecting to the FTP server '10.159.48.75:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 501 Syntax errors in parameter. usage: %[recipient id]%[APRF] where either [recipient] or [APRF] can be omitted. (to change your current default SEND relationship). %% (places you in your 'HOME' TR). &['s'|'single'] ('get' command gets single file). &['m'|'multiple'] ('get' command gets multiple files). '. For details, contact your FTP server vendor..
Can we directly connect to the VAN using FTP in PI, or do we need to do perform some other configuration.
Regards,
Shiladitya

Hi,
I think you need to use Seeburger's FTP adapter instead of normal FTP adapter.
Read this discussion for more information:
Re: Seeburger FTP Adapter And SAP PI 7.1
Regards,
Ravi Kanth Talagana

Exception caught by adapter framework: No configuration / default adapter specified for EDISeparator

Hello Experts,
I am configuring the scenario ( AS2 to EDISeparator and EDISeparator to IDOC ).
Can you please help me with the error below which is from the either the EDISeparator Receiver channel or the EDISeparator Sender channle.
09.06.2014 17:52:18.709
Information
Message is encrypted with 1.3.14.3.2.7 algorithm
09.06.2014 17:52:18.778
Information
AS2 Message is signed with SHA1 (1.3.14.3.2.26) algorithm
09.06.2014 17:52:18.779
Information
AS2 Message message signature is validated, signer ID is X509CertSelector: [ Serial Number: 1624063516 Issuer: CN=Mendelson AS2 TEST,OU=Integration,O=Mendelson,L=Berlin,ST=Unknown,C=GE matchAllSubjectAltNames flag: true ]
09.06.2014 17:52:18.784
Information
AS2 document size is 350 Bytes
09.06.2014 17:52:18.784
Information
Payload charset converted from ISO-8859-15 to ISO-8859-15
09.06.2014 17:52:18.785
Information
B2B EdifactConverterModule : EDI format detected as EANCOM
09.06.2014 17:52:18.785
Information
B2B EdifactConverterModule: Message will be read as ISO-8859-1.
09.06.2014 17:52:18.785
Information
MP: processing local module localejbs/EdifactConverterModule
09.06.2014 17:52:18.785
Information
0}: The module-paramteter "eancom.subversion.prefix" is not set. Using default value "false"
09.06.2014 17:52:18.786
Information
0}: The module-paramteter "eancom..audit" is not set. Using default value "false"
09.06.2014 17:52:18.791
Information
MP: processing local module localejbs/CallSapAdapter
09.06.2014 17:52:18.791
Information
Application attempting to send an XI message asynchronously using connection AS2_http://sap.com/xi/XI/AS2
09.06.2014 17:52:18.792
Information
Trying to put the message into the send queue
09.06.2014 17:52:18.831
Information
Message successfully put into the queue
09.06.2014 17:52:18.831
Information
The application sent the message asynchronously using connection AS2_http://sap.com/xi/XI/AS2. Returning to application
09.06.2014 17:52:18.836
Information
MIC (DeJYUIusqQj6aaYRASdHhAo+4J0=) is calculated using SHA1 algorithm.
09.06.2014 17:52:18.838
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:18.843
Information
Message status set to DLNG
09.06.2014 17:52:18.845
Information
MDN is succcessfully signed with SHA1 (1.3.14.3.2.26) algorithm
09.06.2014 17:52:18.859
Information
Trying to put the message into the send queue
09.06.2014 17:52:18.912
Information
Message successfully put into the queue
09.06.2014 17:52:18.913
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:18.918
Information
Message status set to DLNG
09.06.2014 17:52:18.961
Information
Trying to put the message into the send queue
09.06.2014 17:52:19.001
Information
Message successfully put into the queue
09.06.2014 17:52:19.001
Information
The message was successfully retrieved from the send queue
09.06.2014 17:52:19.006
Error
MP: exception caught with message No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.006
Information
Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
09.06.2014 17:52:19.006
Information
Message status set to DLNG
09.06.2014 17:52:19.009
Error
Exception caught by adapter framework: No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.010
Error
Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.Exception: No configuration / default adapter specified for EDISeparator
09.06.2014 17:52:19.015
Information
The asynchronous message was successfully scheduled to be delivered at Mon Jun 09 17:57:19 CEST 2014
09.06.2014 17:52:19.015
Information
Message status set to WAIT

Hello Ruchir Sinha and Dimitri Sannen,
I think I have progressed a bit. Just unsure of the usage of the Module configuration .I now get a new error (see below) and the updated config details are :
Sender Interface :
Receiver Interface :
Sender AS2 config :
Receiver EDISeparator config :
Sender EDISeparator config :
Receiver IDOC config :
IDoc details configured but not added in this document
16.06.2014 11:52:35.414
Information
The message was successfully retrieved from the send queue
16.06.2014 11:52:35.420
Information
Delivering to channel: B2BSE00002_O2C_ORDERS_VANS_PO_WRITE_EDISeparator
16.06.2014 11:52:35.420
Information
MP: processing local module localejbs/ModuleProcessorExitBean
16.06.2014 11:52:35.420
Information
Message entered AF MP exit bean and will now be passed to the JCA adapter
16.06.2014 11:52:35.420
Information
Message status set to DLNG
16.06.2014 11:52:35.433
Information
UNA segment UNA found
16.06.2014 11:52:35.444
Information
Parsed UNB segment 333333333/014 to 111111111/014
16.06.2014 11:52:35.445
Information
Parsed UNH segment ORDERS D96A
16.06.2014 11:52:35.514
Information
Searching sender channel for Eancom message part message with Message type ORDERS, Message version number D, Message release number 96A, Interchange sender identification 333333333, Interchange sender identification code qualifier 014, Interchange recipient identification 111111111, Interchange recipient identification code qualifier 014, Message Subversion EAN008, Message Agency UN
16.06.2014 11:52:35.579
Information
Sender channel (Channel) keys: ObjectId=7abf551ddbb638268f91af80ec1c04c8 values: ToPartySchema= Attributes=(Attributes:Channel:EDISeparator:INBOUND) values: edisep.advanced=false snd.interchangeSenderId=.* snd.tradacommessagetype=.* snd.xpath= snd.xpath.value= snd.filterCondition=equal snd.edifactMessageReleaseNumTxt= snd.tradacomMessageTypeUsingFreeText=false snd.eancomMessageReleaseUsingFreeText=false snd.eancomMessageVersionFreeText= snd.odetteMessageType=.* snd.edifactMessageVersion=.* snd.xml.splitPath=null snd.eancomMessageVersion=.* snd.odetteMessageVersion=.* snd.edifactMessageRelNumUsingFreeText=false snd.otherVersionReleaseIndustryIdentifierCodeEnabled=false adapterStatus=active snd.vdaMessageType=.* snd.eancomCONTRLMessageRelease=3 snd.odetteMessageTypeTxt= snd.tradacommessageversion=.* snd.edifactMessageVerNumUsingFreeText=false snd.edifactMessageTypeUsingFreeText=false snd.xpathUsingFreeText=false snd.interchangeSenderIdCode=.* snd.otherVersionReleaseIndustryIdentifierCode=.* snd.odetteMessageTypeUsingFreeText=false snd.tradacomreccode=.* snd.edifactMessageVersionFreeText= snd.edifactInterchangeRecipientIdentification=.* eoio.sequenceId= snd.edifactMessageTypeTxt= snd.odetteMessageVerNumUsingFreeText=false snd.eancomMessageVerNumUsingFreeText=false snd.interchangeReceiverId=.* snd.eancomMessageRelease=.* snd.tradacomsendername=.* snd.tradacomMessageTypeTxt= snd.vdaLieferantenNummer=.* snd.interchangeReceiverIdCode=.* snd.edifactInterchangeSenderIdentificationCode=.* snd.odetteMessageVersionFreeText= snd.versionReleaseIndustryIdentifierCode=.* snd.edifactInterchangeSenderIdentification=.* snd.edifactMessageType=.* snd.eancomMessageType=.* snd.xpathTxt= snd.vdaMessageTypeTxt= deliverySemantics=eo snd.eancomMessageReleaseTxt= snd.plainmessagetype=.* snd.xml.split=false snd.edifactMessageRelease=.* snd.vdaMessageTypeUsingFreeText=false snd.tradacomrecname=.* edisep.addParameterParams=TableData: edisep.addParameterParams {} snd.encoding=iso885915 snd.vdaKundenNummer=.* snd.tradacomsendercode=.* snd.edifactCONTRLMessageRelease=3 snd.edifactInterchangeRecipientIdentificationCodeQualifier=.* snd.transactionSetIdentifierCode=.* Service=ASJAVA_DX5 Channel=B2BSE00002_O2C_ORDERS_PO_ECC_READ_EDISeparator EngineType=CA Party= TransProt=XI TransProtVers=1.0.0 FromPartySchema= FromPartyAgency= Direction=I MsgProt=EANCOM MsgProtVers=1.0.0 EngineName= AdapterType=EDISeparator AdapterSWCV=06c536e6fafe11e0bb1cea8f0a4290b1 ToPartyAgency= AdapterNamespace=http://sap.com/xi/XI/EDISeparator found. New message ID is f18894a8-f53b-11e3-a748-00001e96c7e2
16.06.2014 11:52:35.586
Error
MP: exception caught with cause javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.586
Error
Message could not be forwarded to the JCA adapter. Reason: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.590
Error
Exception caught by adapter framework: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule
16.06.2014 11:52:35.591
Error
Transmitting the message to endpoint <local> using connection AS2_http://sap.com/xi/XI/AS2 failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: com.sap.aii.adapter.ediseparator.ra.integration.DispatchException: Message cannot be dispatched: Message cannot be dispatched: Error during processing local class: localejbs/GenericConverterModule

Exception caught by adapter framework

Hi
My scenario is based file -->RFC with BPM (parforEach) and multimapping.
File adapter is picking data according to input file, but RFC couldn't able to process each split data. I am gettign following error.
2006-09-11 10:39:07 Error Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>
2006-09-11 10:39:07 Error Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: functiontemplate from repository was <null>.
Any idea how to resolve this issue..!
Regards
Sankar!

Hi..
Does this way i mapped file to BAPI, is this correct way ?
does we change the BAPi structure like this in target side?
Source Structure: TargetStructure
Messages (1:1) Message(1:1)
Message1(1:1) Message1(1:1)
MT_Request(1:1)
Recordset(0:U) --> BAPI_INCOMINGINVOICE(0:U)
HDR (0:1) HeaderData(1:1)
LINEITEM(0:U)
 field1(0:1) ---> filed1(0:1)
 field2(0:2)
 HDR--->GLACCOUNTDATA(0:1)
LINEITEM(0:U)---> item(0:U)
field3(0:1) ---> field(0:1)
field4(0:1) ---> field2(0:1)
and my BPM is :
Receive>Transfromation->Block with asyncSEND--->
Receiver : File_MI
Trasformation: IM, sorec: File_AI and tar: BApi_AI
Block -->parForeach, multi: BAPI_AI, curr: BAPI_AI
asyncSend-->BAPi_AI
Note: My input file should have various headers with associated line items...!
Thanks,
Sankar!

Adapter Framework caught exception - 401

Hi,
I am trying to use NTLM authentication using Axis adapter in PI 7.1 SP7 but getting 401 error.
Axis adapter works for Basic auth.
SAP Note 856597 talks about giving PI user security role xi_adapter_soap_message. Haven't found the equivalent navigation of visual admin in NWA.
Details from message monitoring
Information Axis: getting handler trp of java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
Error Axis: error in invocation: (401)Unauthorized
Error Adapter Framework caught exception: (401)Unauthorized
Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: (401)Unauthorized.
Any help is appreciated.
Thanks
Kiran Gollapudi

Hi guys,
Even the message being old, there are some of you that may want a hint on how to solve this problem.
First of all, please refer to the generic description of the error that may help one of you:
401 Unauthorized
Description: The request requires user authentication
Possible Tips:
u2022 Check XIAPPLUSER is having this Role -SAP_XI_APPL_SERV_USER
u2022 If the error is in XI Adapter, then your port entry should J2EE port 5<System no>
u2022 If the error is in Adapter Engine
u2013then have a look into SAP note- 821026, Delete the Adapter Engine cache in transaction SXI_CACHE Goto --> Cache.
u2022 May be wrong password for user XIISUSER
u2022 May be wrong password for user XIAFUSER
u2013 for this Check the Exchange Profile and transaction SU01, try to reset the password -Restart the J2EE Engine to activate changes in the Exchange Profile After doing this, you can restart the message
Alternatively, ensure you maintain the correct password for all the service users according to one of the notes
below, taking into account your system version:
PI 7.1:
#999962 - PI 7.10: Change passwords of PI service users
XI 7.0
#936093 - XI 7.0: Changing the passwords of XI service users
XI 3.0
#721548 - XI 3.0: Changing the passwords of the XI service users
Hope I could helped.
Regards,
Caio Cagnani

Exception caught by adapter framework: RfcAdapter: receiver channel not in

Hi friends,
I am doing a file-RFC-file scenario. This is based on the blog: /people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit The company ID is sent to the RFC through a xml file. RFC will return the company details which will be written again into a xml file.
My source file is getting picked up. But while sending the company ID to the RFC, i am getting an error. It says: Exception caught by adapter framework: RfcAdapter: receiver channel not in list of running clientPools:. I have checked the RFC and is running perfectly.
Can anybody help me to solve this error?
Regards,
Divija.

Hi,
it is better to restart the RFC adapter engine.
Is this RFC adapter is active in the Adapter Monitoring ?
Also change the RFC adapter configuration and activate it. Then activate the Receiver Agreement.
Also refer SAP note -730870 ( question no 17 and 20)
Regards,
Moorthy

Error In XI Adapter Framework

Similar Messages

Maybe you are looking for