Error in XI Dispacher running server not connected 503 service unavailable
Hi All,
We are facing a problem in SAP XI 3.0, we are having two SLD . Both Development and Quality are in One SLD and production is in a different SLD. We found error "<b>Dispatcher running but no server connected</b>! 503 service unavilable" in our QA system and this error happened in peak time only. We are using OS AS400/DB2 and Java SP 16 is udated in our systems. We didnt found any perticular error in Work Directory log file also . pls give solution to resolve this error.
Kind Rgds,
Gopinath.
hey
have a look at the following
Re: Dispatcher running but server no connected
Dispatcher running, but no server connected!!!! (Anybody out there)
Dispatcher Running; Server could not be connected
thanx
ahmad
Similar Messages
-
Dispatcher Running Server Not Connected
Hi,
I have the same problem on Windows 2003 Server EP6 WAS640 SR1 SP9
I have the WAS640 for ABAP with the Java Add In and the Enterprise Portal installed on top.
When I try to connect to the Portal through a browser I get the message:
Dispatcher Running Server Not Connected
In the JCMON I cannot start Server0 and I get the errors 1,2,3,4 and it tries to start and then goes to status STOPPED
Does anyone know the solution ?
My system was working, the last change I made was to authenticate users against an SAP system and then I did a reboot and now the J2EE won't start.
Any help is much appreciated.
Thanks,
Tomas.some more info, this problem started after I configured the Portal to authenticate against the SAP system
In the portal system log for server.0.log there is the following info:
Caused by: com.sap.engine.services.security.exceptions.BaseSecurityException: Anonymous principal not configured
at com.sap.engine.services.security.login.SecurityContext.setAnonymousPrincipal(SecurityContext.java:504)
at com.sap.engine.services.security.SecurityServerFrame.start(SecurityServerFrame.java:150)
... 5 more
Caused by: com.sap.security.core.server.userstore.UserstoreException: Could not get user J2EE_GUEST
at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:187)
at com.sap.engine.services.security.userstore.context.UserContext.getUserInfo(UserContext.java:87)
at com.sap.engine.services.security.login.SecurityContext.setAnonymousPrincipal(SecurityContext.java:498)
... 6 more
Caused by: com.sap.security.api.NoSuchUserAccountException: USER_AUTH_FAILED: User account for logonid "J2EE_GUEST" not found!
at com.sap.security.core.imp.AbstractUserAccount.<init>(AbstractUserAccount.java:334)
at com.sap.security.core.imp.DBTextFileUserAccount.<init>(DBTextFileUserAccount.java:56)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:339)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:277)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:371)
at com.sap.security.core.imp.UserAccountFactory.getUserAccountByLogonId(UserAccountFactory.java:366)
at com.sap.security.core.server.userstore.UserContextUME.engineGetUserInfo(UserContextUME.java:183)
... 8 more
#1.5#00A0D1BC74B6001E0000000C0000118C0003F7536153ADF0#1116362417365#/System/Server##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_51##0#0#Error#1#/System/Server#Plain###Core service security failed. J2EE Engine cannot be started.#
#1.5#00A0D1BC74B6001E0000000E0000118C0003F7536153BD59#1116362417365#/System/Server##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_51##0#0#Fatal#1#com.sap.engine.core.Framework#Plain###Critical shutdown was invoked. Reason is: Core service security failed. J2EE Engine cannot be started.#
Is it possible to reset the configuration back to what it was, or back to a default configuration\like in EP5 ?
Thanks,
Tomas. -
Dispatcher Running; Server Not connected - J2ee Pos installation problems
Hi,
Got problem with starting J2EE Engine.
The message in the browser:
Dispatcher Running; Server Not connected - J2ee Pos installation problems
Chked up in the log files:
RFCEngine Server startup stopped.
com.sap.mw.jco.JCo$Exception(129)-JCO_Error_Server_startup
version of rfc driver is invalid.
Any help
Thnx
MeesumHi Rohin,
Is it true that jdk must be > 1.4.
Because I came across many places where it is explicitly stated that WAS 620 supports only jdk 1.3. pls let me know
Thnx anyway
meesum -
Dispatcher running but no server connected - 503 service unavailble exit co
hi Masters,
in server ecc r3 and ep is installed on db 6 in single machine.for some reason after restart the server when i was going to j2ee process table i found
SDM and DISPATCHER are in green color. but SERVER0 is showing Grey color. i mean it is not connecting to server.
when i give http://hostname:portno/irj/portal , it showing error message
DISPATCHER RUNNING BUT NO SERVER CONNECTED.
503 SERVICE UNAVAILBLE.
in mmc --
IN SERVER0 - EXITCODE IS -- 11113. (RESTARTS ARE 4 BY DEFAULT).
and actually i did some mistakes in UME.
before then in portal . system adminstartion -
> sys configuration -
> ume
in sapsystem tab
by default user id -- sapjsf . but i changed this one to sap r3 user - admin. and i did change to password also.
and after i restart the server it showing error message. dispatcher running but no server connected.
Please can any one give solution or give some guidance , how to solve or any related sap note numbers. i am expecting
the solution is may be link with config tool. but how to solve i have no idea.
reply will highly appreciated. ThanksHi Sujana,
Check these thread out, there people discuss same issue that you are facing
Dispatcher running but no server connected 503 Service Unavailable
503 Service unavailable, dispatcher running, but no server connected
Regards, -
Dispatcher is running, but server not connected
Hello,
When I load the portal with the link http://sapbw:50000/irj/portal the page display this error
"Dispatcher is running, but server not connected"
In the log file defaultrace.trc is this details
#1.5#000F2097D58D004100000CC0000013C00003F973E869EFAE#1118701161401#com.sap.engine.services.servlets_jsp.Deploy#sap.com/webadmin#com.sap.engine.services.servlets_jsp.Deploy#J2EE_GUEST#18####23d60950dc5911d9bc08000f2097d58d#SAPEngine_Application_Thread[impl:3]_18##0#0#Error##Plain###Error occured in invoking event "valueUnbound()" on listener class com.sap.engine.webadmin.control.WebAdminClusterTreeGenerator. The http session is ApplicationSession[id=(sapbw_DBW_00)ID3830150DB20054430341437593419End]. The attribute is com.sap.engine.webadmin.TREE_GENERATOR. The error is: com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: Method removeAttribute() is called in an invalid session.
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.removeAttribute(ApplicationSession.java:640)
at com.sap.engine.webadmin.control.WebAdminClusterTreeGenerator.valueUnbound(WebAdminClusterTreeGenerator.java:331)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebEvents.sessionValueUnbound(WebEvents.java:410)
at com.sap.engine.services.servlets_jsp.server.runtime.context.WebEvents.sessionValueUnbound(WebEvents.java:404)
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.invalidateSession(ApplicationSession.java:287)
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.validate(ApplicationSession.java:138)
at com.sap.engine.services.servlets_jsp.server.runtime.client.ApplicationSession.removeAttribute(ApplicationSession.java:637)
Thanks very much for you help
DayanaHi Dayana,
This message occurs while the server is starting i.e starting the core services and delpoying the applications. From the above error message it is hard to
say what the problem is. Can you explain more on what is happening? Also generally it takes about 15 -25 minutes depends on the environment.
Also do you see any errors in the following log files
\usr\sap\XXX\JC00\work\std_server0.out ?
Regards
-Venkat Malempati -
Dispatcher running but message server not connected
Hi Guys,
I installed SAP netweaver 7.01 trial version and using MaxDB as database server.
When I start the NSB using SAPMMC, the message server is running but the disp+work.EXE is not working properly. It sometimes shows the status 'Running but message server not connected' and sometimes 'Running but que standstill'. It would be a great help if you could guide me to the solution of this problem.
DEV_MS file:-
trc file: "dev_ms", trc level: 1, release: "701"
[Thr 2148] Sat May 14 18:02:00 2011
[Thr 2148] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 0
intno 20020600
make: multithreaded, ASCII, optimized
pid 1484
[Thr 2148] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 1484) [msxxserv.c 1853]
[Thr 2148] MsInitAclInfo: acl file F:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
[Thr 2148] MsGetOwnIpAddr: my host addresses are :
[Thr 2148] 1 : [10.10.0.10] DESKTOP5 (HOSTNAME)
[Thr 2148] 2 : [127.0.0.1] localhost (LOCALHOST)
[Thr 2148] 3 : [192.168.1.8] desktop5 (NILIST)
[Thr 2148] Sat May 14 18:02:01 2011
[Thr 2148] MsHttpInit: full qualified hostname = desktop5
[Thr 2148] HTTP logging is switch off
[Thr 2148] set HTTP state to LISTEN
[Thr 2148] ms/icf_info_server : deleted
[Thr 2148] *** I listen to port sapmsNSP (3600) ***
[Thr 2148] *** I listen to internal port 3900 (3900) ***
[Thr 2148] *** HTTP port 8100 state LISTEN ***
[Thr 2148] CUSTOMER KEY: >S1138463071<
[Thr 2148] build version=701.2008.03.06
[Thr 2148] Sat May 14 18:03:20 2011
[Thr 2148] *** ERROR => MsSClientHandle: no server provides service ENQ (4), requested from desktop5_NSP_00 [msxxserv.c 4711]DEV_DISP file:-
trc file: "dev_disp", trc level: 1, release: "701"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7010
patchlevel 0
patchno 7
intno 20020600
make: multithreaded, ASCII, optimized
pid 2740
Sat May 14 18:02:02 2011
kernel runs with dp version 240(ext=110) (@(#) DPLIB-INT-VERSION-240)
length of sys_adm_ext is 364 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2740) [dpxxdisp.c 1257]
shared lib "dw_xml.dll" version 7 successfully loaded
shared lib "dw_xtc.dll" version 7 successfully loaded
shared lib "dw_stl.dll" version 7 successfully loaded
shared lib "dw_gui.dll" version 7 successfully loaded
shared lib "dw_mdm.dll" version 7 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Sat May 14 18:02:11 2011
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 9 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5529]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >desktop5_NSP_00 <
DpShMCreate: sizeof(wp_adm) 8232 (1176)
DpShMCreate: sizeof(tm_adm) 3786880 (18840)
DpShMCreate: sizeof(wp_ca_adm) 1280 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1296)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 057F0040, size: 4389744)
DpShMCreate: allocated sys_adm at 057F0040
DpShMCreate: allocated wp_adm at 057F1BF8
DpShMCreate: allocated tm_adm_list at 057F3C20
DpShMCreate: allocated tm_adm at 057F3C50
DpShMCreate: allocated wp_ca_adm at 05B904D0
DpShMCreate: allocated appc_ca_adm at 05B909D0
DpShMCreate: allocated comm_adm at 05B90E80
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 05C11D30
DpShMCreate: allocated gw_adm at 05C11D70
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05C11DA0
DpShMCreate: allocated wall_adm at 05C11DA8
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Sat May 14 18:02:12 2011
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Sat May 14 18:02:13 2011
***LOG Q0K=> DpMsAttach, mscon ( desktop5) [dpxxdisp.c 12204]
DpStartStopMsg: send start message (myname is >desktop5_NSP_00 <)
DpStartStopMsg: start msg sent
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
DpMsgAdmin: Set release to 7010, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1048]
DpMsgAdmin: Set patchno for this platform to 7
Release check o.K.
Sat May 14 18:02:53 2011
my types changed after wp death/restart 0x9f --> 0x9e
my types changed after wp death/restart 0x9e --> 0x9c
my types changed after wp death/restart 0x9c --> 0x98
my types changed after wp death/restart 0x98 --> 0x90
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat May 14 18:03:03 2011
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat May 14 12:33:03 2011
======================== -
SAP MMC Says Dispatcher running but not connected to message server
I installed the ABAP Stack Sneak Preview Netweaver.I see all the relevant NSP entries in my Services file.But when i disconnect my internet I see in SAP MMC that Disptacher says its running but not connected Message Server(turns yellow) and also the SAP gets logged off. Is Internet connection required for running NSP(ABAP System SID)??
If I want to get rid of this internet dependency what settings i need to change ??
My current Message trace file says as follows..
Trace File of Message Server
trc file: "dev_ms", trc level: 1, release: "640"
[Thr 4516] Mon Sep 26 21:51:06 2005
[Thr 4516] systemid 560 (PC with Windows NT)
[Thr 4516] relno 6400
[Thr 4516] patchlevel 0
[Thr 4516] patchno 43
[Thr 4516] intno 20020600
[Thr 4516] pid 4512
[Thr 4516] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 4512) [msxxserv.c 1661]
[Thr 4516] Mon Sep 26 21:51:07 2005
[Thr 4516] MsHttpInit: full qualified hostname = sai
[Thr 4516] HTTP logging is switch off
[Thr 4516] set HTTP state to LISTEN
[Thr 4516] *** I listen to port sapmsNSP (3600) ***
[Thr 4516] *** HTTP port 8100 state LISTEN ***
[Thr 4516] CUSTOMER KEY: >K0201639721<
[Thr 4516] Mon Sep 26 21:52:46 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/urlprefix (403 Forbidden)
[Thr 4516] Mon Sep 26 21:52:50 2005
[Thr 4516] MsHttpReadUrl: H-1 url = /sap/public/icf_info/logon_groups (403 Forbidden)
Looking for your valuable solutions.. Will definitely reward good points if gets solved
Thanks
Sreeni.There is now also a Weblog about https://weblogs.sdn.sap.com/pub/wlg/2479 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken].
Regards
Gregor -
When I go to sync my iphone 3gs itunes alerts me that an update is available. I check to download an update. I then receive an error message stating that I am not connected to the internet. I am 100% positive that I am connected and before this download I was instructed to update itunes which I did without any problems and restarted my computer. I have tried all of the troubleshooting suggestions. I have no problem syncing or using the itunes store. I just can't get the update. I also have no problems with my iphone connecting to a wireless internet connection. Please Help!!!!!!
http://support.apple.com/kb/TS3694
http://support.apple.com/kb/TS3125
http://support.microsoft.com/kb/299357 -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
I can't retrieve email, server not connected, at work, on my ipad mini
I can't retrieve email, server not connected, at work, on my ipad mini
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
I can't download iTunes to my vista computer. Error message says that computer is not connected to internet, when is is. Firewall allows iTunes.
This is a common issue, temporarily disable the Anti-Virus and Firewall software on the laptop.
-
VS 2010 error: 'Error while trying to run project: Not implemented'
I added a new Oracle database project using Oracle Tools for Visual Studio 2010. Once the Oracle database project is added to my Solution, my Visual Studio is no longer able to start the debugger and at times not able to run Test Cases. It error with 'Error while trying to run project: Not implemented'. If I unload the project, VS starts working fine.
Any idea on how to resolve this issue?I ran into this problem as well, working in a VS2010 solution which included an ASP.NET web project and the v11.2.0.2.1 ODT version of the Oracle project.
Turns out that I was able to solve the problem by removing the Oracle project from the solution, and then adding it back in. From a SLN file point of view, it seems that as long as the Oracle SQL project is located after the Web Application Project that everything works fine.
Note that the SLN file is not organized by alphabetical project name, so changing the name of the SQL project doesn't help; its organized by order of project addition to the solution, so removing and re-adding is the way to go. -
'Error while trying to run project: Not implemented'
I added a new Oracle database project using Oracle Tools for Visual Studio 2010. Once the database project is added, my Visual Studio is no longer able to start the debugger. It error with 'Error while trying to run project: Not implemented'. If I unload the project, VS starts working fine.
Any idea on how to resolve this issue?I ran into this problem as well, working in a VS2010 solution which included an ASP.NET web project and the v11.2.0.2.1 ODT version of the Oracle project.
Turns out that I was able to solve the problem by removing the Oracle project from the solution, and then adding it back in. From a SLN file point of view, it seems that as long as the Oracle SQL project is located after the Web Application Project that everything works fine.
Note that the SLN file is not organized by alphabetical project name, so changing the name of the SQL project doesn't help; its organized by order of project addition to the solution, so removing and re-adding is the way to go. -
Sip 503 service unavailable and sip 500 internal server error
Hi guys,could any one help me in the following.
ITSP-->Voice gateway configured as CUBE-->CUCM-->UCCX
I am moving a system from cme and aa enviroment to cucm and uccx
The VGW is configured as CUBE and also is added as h323 gateway on cucm.
When i tested the debug ccsip messages shows
Sip 503 service unavailable or
sip 500 internal server error.
I can't now provide any debugs cause i am not on site,only on Saturday.
As i read in previous discussion that could be the bind source address problem but i had this configured.
Also i tried to configure the gateway instead of h232 to use sip trunk from cucm,but after this the incoming calls didn't even reach the router,the debug ccsip messages showed nothing.
For now can any one advice me to what these 2 errors related to.
What could be missing?
Thanks in advance.Hi there : can some one explain the reason that i am getting this sip error with itsp:
here is the debug of ccsip messages:
Received:
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
CSeq: 1 INVITE
Min-SE: 90
Session-Expires: 3600;refresher=uac
Contact:
Allow: INVITE,CANCEL,BYE,ACK,REFER,UPDATE,INFO,PRACK
Supported: timer,100rel
Diversion: [email protected]>;privacy=off;screen=no;reason=unknown,[email protected]>;privacy=off;screen=no;reason=unknown
Max-Forwards: 70
User-Agent: VCS 5.8.2.56-03
Content-Length: 394
Content-Type: application/sdp
v=0
o=- 87852 198805 IN IP4 188.254.68.67
s=SBC call
c=IN IP4 188.254.68.67
t=0 0
m=audio 23682 RTP/AVP 8 0 18 98 96 97 101
a=rtpmap:98 G.729a/8000
a=rtpmap:96 G.729ab/8000
a=rtpmap:97 G.729b/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=fmtp:18 annexb=no
a=ptime:10
a=X-vrzcap:vbd Ver=1 Mode=FaxPr ModemRtpRed=0
a=X-vrzcap:identification bin=DSR2866 Prot=mgcp App=MG
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Content-Length: 0
00:43:23: //11/FDB448CE8020/SIP/Msg/ccsipDisplayMsg:
Sent:
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To:
c2801#er=phone>;tag=27BA64-1DAE
Date: Sat, 23 Nov 2013 08:06:29 GMT
Call-ID: isbc6994325518768294927-1385194135-11717
CSeq: 1 INVITE
Allow-Events: telephone-event
Server: Cisco-SIPGateway/IOS-12.x
Reason: Q.850;cause=38
Content-Length: 0
00:43:23: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Received:
ACK sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/UDP 188.254.68.66:9298;branch=z9hG4bK-6110d60075a24c0f-a3c000c-1
Call-ID: isbc6994325518768294927-1385194135-11717
From: [email protected];user=phone>;tag=sbc09106994325518768294927
To: ;tag=27BA64-1DAE
CSeq: 1 ACK
Max-Forwards: 70
Content-Length: 0
show run:
voice service voip
ip address trusted list
ipv4 87.226.136.164 255.255.255.255
ipv4 172.16.24.0 255.255.255.0
ipv4 188.254.68.66 255.255.255.255
ipv4 188.254.68.67 255.255.255.255
ipv4 188.254.69.66 255.255.255.255
ipv4 188.254.69.67 255.255.255.255
ipv4 46.38.52.68 255.255.255.255
address-hiding
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
redirect ip2ip
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback cisco
sip
voice class codec 1
codec preference 1 g729br8
codec preference 2 g729r8
codec preference 3 g711alaw
codec preference 4 g711ulaw
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729r8
codec preference 4 g729br8
voice translation-rule 1
rule 1 /XXX5397962/ /1999/
voice translation-rule 2
rule 1 /XXX55317577/ /1999/
voice translation-rule 3
rule 1 /5555317884/ /1999/
voice translation-profile ROS
translate called 1
voice translation-profile ROS2
translate called 2
voice translation-profile ROS3
translate called 3
interface FastEthernet0/0
ip address 178.208.129.221 255.255.255.248
ip access-group INBOUND in
no ip unreachables
ip verify unicast reverse-path
ip nat outside
ip inspect IPFW in
ip inspect IPFW out
ip virtual-reassembly in
duplex auto
speed auto
no cdp enable
interface FastEthernet0/1
no ip address
ip nat inside
ip virtual-reassembly in
duplex auto
speed auto
interface FastEthernet0/1.1
encapsulation dot1Q 1 native
ip address 10.110.0.200 255.255.255.0
ip nat inside
ip virtual-reassembly in
interface FastEthernet0/1.2
encapsulation dot1Q 2
ip address 172.16.24.254 255.255.255.0
ip nat inside
ip virtual-reassembly in
h323-gateway voip interface
h323-gateway voip bind srcaddr 172.16.24.254
ip dns server
ip nat inside source list NAT interface FastEthernet0/0 overload
ip route 0.0.0.0 0.0.0.0 178.208.X.X
ip route 192.168.0.0 255.255.0.0 Null0 254
sccp local FastEthernet0/1.2
sccp ccm 172.16.24.101 identifier 1 version 7.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 1 register XCODE123456
keepalive retries 1
keepalive timeout 10
switchover method immediate
switchback method immediate
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
codec g729r8
codec g729br8
maximum sessions 6
associate application SCCP
dial-peer voice 10000 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
destination-pattern 74955397962
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number XXXX5397962
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10010 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS2
destination-pattern XXX55317577
session protocol sipv2
session target ipv4:87.226.136.164
session transport udp
incoming called-number 75555317577
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10020 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS3
preference 1
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.68.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 10021 voip
tone ringback alert-no-PI
description ROSTELECOM Incoming
translation-profile incoming ROS
preference 2
destination-pattern 5555317884
session protocol sipv2
session target ipv4:188.254.69.66
session transport udp
incoming called-number 5555317884
dtmf-relay rtp-nte
codec g711ulaw
dial-peer voice 2 voip
tone ringback alert-no-PI
description to CUCM_PUB
destination-pattern 1...
session target ipv4:172.16.24.101
voice-class codec 2
dtmf-relay rtp-nte
I see in the debug that the itsp over g729 family codecs but not g711 at all
This system was working with this dialpeers before with same provider ,just i have added the dial-peer 2 .
I have changed the codec to match what is offered by itsp but no difference,still getting the same message.
PLZ help ASAP. -
Here is a ticket regarding our current client web application ( Image data add, edit , delete in folder with form data in MSSQL Database) that using code c#, web form, ajax, VS2008, MSSQL Server2008 , it appears that there is an error where the HTTP
503 error occurs.
. Below is a conversation with Host Server support assistant.Can you take a look at it?
Ben (support) - Hi
Customer - We're having an issue with our windows host
Ben (support) - What's the issue?
Customer - 503 errors
Ben (support) - I am not getting any 503 errors on your site, is there a specific url to duplicate the error?
Customer - no, it comes and goes without any change Customer - could you have access to any logs ?
Ben (support) - Error logs are only available on Linux shared hosting, however with this error it may be related to you reaching your concurrent connections
Ben (support) - You can review more about this at the link \
Customer - probably yes - how can we troubleshoot ?
Ben (support) - http://support.godaddy.com/help/article/3206/how-many-visitors-can-view-my-site-at-once
Ben (support) - This is something you need to review your code and databases to make sure they are closing the connections in a timely manner
Customer - we're low traffic, this is an image DB to show our product details to our customers
Customer - ahhhh, so we could have straying sessions ?
Ben (support) - Correct Customer - any way you could check if it's the case ?
Customer - because it was working previously
Ben (support) - We already know that's the case as you stated the 503 errors don't happen all the time if it were issue on the server the the 503 would stay.
Customer - so our 2/3 max concurrent users can max out the 200 sessions
Customer - correct ?
Customer - is there a timeout ?
Ben (support) - no that's not a time out concurrent connections are a little different then sessions and or connections. Lets say for an example you have 5 images on your site and 5 7 users come to your site this is not 7 concurrent connections but 35. They
do close after awhile hence why the 503 error comes and goes. You can have these connections close sooner using code but this is something you have to research using your favorite search engine
Customer - thank you so much
Customer - I'm surprised that this just started a few weeks ago when we haven't changed anything for months
Customer - any changes from your side ? lowering of the value maybe ?
Customer - I'm trying to understand what I can report as a significant change
Ben (support) - We haven't touched that limit in years
Ben (support) - This could just be more users to your site than normal or even more images
Customer - I was thinking that could be it indeed
Customer - so I need to research how to quickly close connections when not needed
Ben (support) - Correctly
Ben (support) - correct
Customer - thanks !!
Ben (support) - Your welcome
Analysis :
The link provided tells us : All Plesk accounts are limited to 200 simultaneous visitors.
From what Ben (support) says and a little extra research, if those aren't visitors but connections then it's quite easy to max out, especially if the connections aren't closed when finished using. I'd suggest forwarding this to Kasem to see what he thinks.
Cheers,
CustomerHi Md,
Thank you for posting in the MSDN forum.
>>
I want to writte C# code for 503 Service Unavailable error to web application page immediate close connection any page loaded.
Since
Visual Studio General Forum which discuss VS IDE issue, I am afraid that you post the issue in an incorrect forum.
To help you find the correct forum, would you mind letting us know more information about this issue? Which kind of web app you develop using C# language? Is it an ASP.NET Web Application?
If yes, I suggest you could post the issue directly on
ASP.NET forum, it would better support your issue.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.
Maybe you are looking for
-
Wildcards in ACNS 5 manifest files
I am trying to write a manifest file for a ACNS V.5.0 system. The channel which is controlled by the manifest file should ideally: Copy a whole directory tree of an HTML web server on the root CE or at least copy one directory of an HTML web server o
-
Play sound behavior in CS4 fails to play sound on click of a flash button
For my college coursework I have created several flash buttons to use as track preview images. The button works fine however trying to get the track to play seems an impossibility! I've inserted the SWF flash button into the place I want it in my tab
-
No password on wake / lock-screen in 10.4.7
I did the update from 10.4.6 to 10.4.7 and now my MacBook Pro will not ask me for a password when waking from sleep or screen saver. Usually I have the Keychain menu visible and select "Lock Screen", but this also does not require a password. I've tr
-
Import data and cofiles via stms
Hi all, I would like to import some data and cofiles via stms in my MiniSAP. Only tables are imported without problems. Programs, transactions or other files of the package will not imported. The imported objects will be not activate automatically. T
-
After moving my library to an external hard drive, I can't sync photos on my iPad. Has anyone had this problem?