Error in XI: Technical Error

Hi,
We have one ECC 6 and one PI 7.0 in our landsacpe, recently we have configured SLD throught SLDAPICUST.
RFC is also working fine.
But when ever users are entering in VA01, they are getting a pop-up asking for login detials for the PI system, but the users in ECC don't have login in PI.
When they click on cancel, we are getting "Error in XI: Technical Error".
Message no. UKM_PI008.
Anyone has any idea about this error and how to solve it.
Thank you,
Siv

HI
There is no relationship betweenSLD config and error you are receiving.
As mentioned you might be interfacing with XI/PI for pushng/pulling some information , in that case it is necessary to provide username and password.
May be you want to concerns the responsible person who has configured the interfacing scenario
Regards,

Similar Messages

E01(technical error) bdocs with error "message is empty "

Hi all,
While monitoring bdocs using SMW02, we found some bdocs are in error state E01(Technical Error).Details are
Bdoc type : MKTPROF_MSG
state : E01 (Technical error (incomplete) )
Error text : message is empty & Service that caused the error CRM_MKTPROF_MSG_MSA
Could anyone tell me how to clear these bdocs.
Regards,
PV.

Hi PV,
Its looks that your mobile bridge is active. If you are not using mobile clients or If marketing objects are not required on the mobile clients, you may deactivate the Mobile Bridge for these objects.
To deactivate the MOBILE BRIDGE for marketing objects, proceed as follows.
Use Transaction SE16 to call table SMW3FDCUST.
Remove the 'ACTIV' flag for the following BDoc types:
CHARVAL_MSG
CHAR_MSG
MKTPROF_MSG
PFTPL_MSG
And then reprocess your BDocs. This should solve the problem.
<b>Reward points if it helps!!</b>
Best regards,
Vikash.

Technical Error When Extracting Time Data

Hi SAP Experts,
I would like to seek your assistance on this case.
When business warehouse extracts HR data from SAP, they received this error message stating "Technical error when extracting time data in HR: HRMS_TIME_TIM_QUOTA 00321478".
Do you have any idea on this?
Thanks.

We don't have Business Warehouse, but it seems your system has problems with a Quota, perhaps for employee # 00321478.

"A technical error during invocation : Could not invoke service reference" Error message while calling a service from BPM

Hi Experts,
We are facing a issue while calling a Automated activity from BPM process, the process gets suspended and the BPM logs says "Process XYZ suspended, A technical error during invocation: Could not invoke service reference name fdhueoegghejietyhsjk6886 Component name ABC " We have already checked the mapped service reference and provider system. Gone through the below link, but no help.
http://http://wiki.scn.sap.com/wiki/display/TechTSG/Sending+a+message+from+SAP+NetWeaver+BPM+process+to+PI+fails+via+automated+activity?original_fqdn=wiki.sdn.sap.com
Any pointers or suggestions to fix up this issue will be highly appreciated. Thanks in advance.
Regards,
Mohit Jaju

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Technical Error when uploading a file using java 1.6.0_17

When I'm uploading a mp3 file size 84.01 Mb i get the following message:
Warning-Security
Name:MyFTPUploader
Publisher:JavaAtWork
From:http://mixes.djfez.com
A box is ticked if you always trust the content from this publisher and then there is the option to run or cancel.
The Message then states that The digital signature was generated with a trusted certificate but has expired.
I then choose to run the application.
I then choose the file from my hard drive to upload(a mp3 file 84.01 Mb), select upload and then the file gets to about 5-7% uploaded and then a message appears Technical Error with an x in a 8 sided pink 2D figure.
Here is what is shown on the Jarva Console:
Java Plug-in 1.6.0_17
Using JRE version 1.6.0_17-b04 Java HotSpot(TM) Client VM
User home directory = C:\Users\Owner\Downloads
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Reading certificates from 10215 http://mixes.djfez.com/admin/myftpuploader-standard-signed-v131.jar | C:\Users\Owner\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\61\66a2727d-46f2f117.idx
MyFTPUploader Standard Edition version 1.3.1
© Copyright JavaAtWork 2005-2008. All rights reserved.
Reading certificates from 11 http://mixes.djfez.com/admin/labels.jar | C:\Users\Owner\AppData\LocalLow\Sun\Java\Deployment\cache\6.0\27\7b49829b-46cb6a8e.idx
220 ProFTPD 1.3.0 Server (DreamHost FTP) [66.33.200.61]
331 Password required for mixes.
230 User mixes logged in.
200 Type set to I
550 uploads/2707/: No such file or directory
550 uploads/2707/: No such file or directory
250 CWD command successful
257 "/uploads/2707" - Directory successfully created
250 CWD command successful
257 "/uploads/2707" is current directory.
227 Entering Passive Mode (66,33,200,61,148,196).
150 Opening BINARY mode data connection for LittleJohn_Happier_Beats_Vol_1.mp3
Dec 7, 2009 9:40:45 PM - FTPUploadTask - upload() - java.net.SocketException: Connection reset by peer: socket write error
Dec 7, 2009 9:40:45 PM - FTPUploadTask - logout() - java.net.SocketException: Connection reset by peer: socket write error
Operating System is Windows Vista Home
If anyone could help me overcome this error it would greatly be appreciated.

If anyone could help me overcome this error it would greatly be appreciated. Java questions here concern programming, not product support.
Connection reset by peer: socket write errorThat says that the server, where the file comes from, closed the connection.
The most likely possibilities
1. The client software is not correctly communicating with the server. Solution: fix the client
2. The server is not correctly handling this request. Solution: fix the server
3. The server doesn't want to talk the the client. Solution: fix both the server and the client.
From the above unless you are in a position to fix something then you do not have an option.
If you yourself cannot fix either of those then this is a vendor problem and you must contact the vendor (creator) of the software client and/or server. You would do that somewhere besides this site.

OOPS A TECHNICAL ERROR OCCURRED

Why must it be so very difficult with all those installations of softwares? Some clever technicians should look at this. Ok it is certainly so that we customers are doing something wrong. But let us know that when we do an installation. And tell us exactly what to do instead of OOPS A TECHNICAL ERROR OCCURRED.
I try to install Flash Player on my new mac book pro that has OS X 10.9 installed. The whole setup works perfectly. But when I try to play music on for example Google Play nothing happen. You get this stupid message OOPS A TECHNICAL ERROR OCCURRED Yes, I understand that too. BUT WHAT EXACTLY IS WRONG! I do the same setup in my iMac with OS X 10.8. The installation is carried out in the same unproblematic way. Additionally, Flash Player works perfectly in Google Play music.
My question is: What am I doing wrong with my attempt to install the Flash Player in OS X 10.9.
Unfortunately, it's often the case that when these eternal updates such as OS X is done, not all programs or devices connected to the computer compatible with the new software. My large format printer stops almost always operate at an update of a new operating system. Because the new operating system is not compatible with my printer and you had to wait for a new update for your printer.
I look forward to an "one click" installation.
Mr Lerin

The details/ID in NWDS Service Reference must exactly match the SOA configuration. Sometimes it's possible you have changed the reference or the group itself and something changed to become mismatched.
It's possible they don't match - but the SG itself will show green in NWA since the service exists and responds on the target system. Does the ID listed in the error match what is shown in the NWDS project?
regards, Nick

Getting technical error

Getting oops technical error while making skype recharge. I m getting this error after clicking buy credit button.
Please note: I have already put $8.99 recharge on 28th november 2014, I want to put the same again. Kindly do the needful.

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

Getting Msg: Error when calling Credit Management: Technical Error

Hi All,
While creation of sales order in ECC, i am getting a message "Error when calling Credit Management: Technical Error"
Can you help me in this case
Regards,
Satish

Satish,
Just so you know, this BADI "links" SD module to FSCM credit management. If you use the right code in this BADI, it copies over credit information on to the sales order such as Credit Account, Risk Class and Credit representative code. (Later this risk class, order's credit control area and credit group is used to look up the appropriate line in OVA8 settings)
Now you could be getting this error for any of the issues:
1. If the business partner is not created for the customer for which you're trying create a sales order (The credit account (sales order header) should have a relevant BP already) Check if the BP is correctly created.
2. Next if the credit data has been maintained for the BP in credit management.
3. XI/PI connectivity issues etc
Check if all this is maintained and you should be good. Cheers

Technical error extracting B1 Sales documents

Hello,
I have a Business Process to extract B1 Sales documents to BW.
The process is scheduled and when it start running I get following technical error:
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.OutOfMemoryError: Java heap space (failed to allocate 18997024 bytes)
¿Is there any posibility to limit the memory in order to avoid the error?
Regards,
Jose

Hello Jose,
This error usually occurs on a 64 bit environment using 64 bit Installation files and the root cause is the assigned memory in SAP Business One integration service is set too low.
You should raise the maximum memory pool of SAP Business One integration services (Tomcat Services) to greater than 1500 MB.
Hope that helps.
Cheers,
Lisa

'Technical error' when importing customers to B1

Version 2007.0.4, BizPackage : Business Partner (R3 to B1), the data import fails due to 'Technical error' :
Invoke of: GetBusinessObjectFromXML Source: Description: Invalid item name '' in Enum 'BoYesNoEnum'. The valid names are: 'tNO'-'N', 'tYES'-'Y'
Any idea how to fix it?

Hello see my colleague yu's comment as below. when I forward this question to her
Hi Yatsea:
It's caused by wrong/missing value mapping -- for some certain field,B1 accepts 'tNO' or 'tYES' only , but in R3 the corresponding field has some other values. Error occurs when the value is not correctly "translated".
I guess it's the field "CollectionAuthorization" that hasn't been configurated with proper value mapping. But I'm not sure, need to check the error payload.
Regards,
Chen Yu

Technical error no. 72

Dears,
No entry in table $ for key $ at $ T549Q 03 01.09.2011
Technical error no. 72
In table T549Q I created payroll periods from 2000 to the end of 2011 on payroll area 01 (Monthly), The error message still shows on PT60.
What should I do?
Regards,
MA

Hi Mohammed,
Check table V_T549A
For the payroll area with problem note period parameter
And in table V_T549Q select the period parameter for the related payroll area.
And you should check the entries in the table.
For example table should have these entries:
2010     01     01.01.2010     31.01.2010     2009     12
2010     02     01.02.2010     28.02.2010     2010     01
2010     03     01.03.2010     31.03.2010     2010     02
2010     04     01.04.2010     30.04.2010     2010     03
2010     05     01.05.2010     31.05.2010     2010     04
2010     06     01.06.2010     30.06.2010     2010     05
2010     07     01.07.2010     31.07.2010     2010     06
2010     08     01.08.2010     31.08.2010     2010     07
2010     09     01.09.2010     30.09.2010     2010     08
2010     10     01.10.2010     31.10.2010     2010     09
2010     11     01.11.2010     30.11.2010     2010     10
2010     12     01.12.2010     31.12.2010     2010     11
2011     01     01.01.2011     31.01.2011     2010     12
2011     02     01.02.2011     28.02.2011     2011     01
2011     03     01.03.2011     31.03.2011     2011     02
Regards;
Okan

Technical error on Lookup in ccBPM

Hi,
After we patch Pi server form sp14 to 23 we get error :
Technical error occurred during Lookup in ccBPM
And on TCO SLG1 - Application log is "Alert category ZFI-CAX_LOOKUP does not exists".
Any help.
regards

Hi spantaleoni,
Thanks for reply, I am new on PI, Can you explain what you mean by But the alert category still exist??.
I patch Pi installation and now We have problem on ccBPM flow to RKI (Lookup Company))
On SLG1 - Application log I have som red entry :
Alert category PROCESS ALERT does not exist Message no. SALERT012 and
Alert category ZFI-CAX_LOOKUP does not exist Message no. SALERT012. It is the only massages I have .
Regards

B1i SN: Send Email on Technical Error

Hi experts,
is it possible to send an Email if an technical erro occurs?
Especially for inbound errors!
In my Sceanrios there are often File Inbound Erros because of wrong tags and so on. Therefore it would be nice to get informed if something fails.
Any ideas?
Regards
Sebastian

Hi Sebastian,
in B1if you can define a customized error handling for your scenario package.
Please select your deactivated package via Scenarios -> Package design, and click Definitions button.
In the drop down-list, select Error Handling.
In the opening window, please click the Info button to see at which places a customized error handling can be implemented in general.
As prerequisite for such a customized error handling an special "error scenario step" needs to be implemented first, otherwise you cannot select another than "default error handling".
Best regards
Bastian

XI technical error messages

We are using JMS adapter, the partner system that connects to XI wants to see a list of technical errors messages to handle the errors.
Where can I find a standard list of technical XI error messages that get passed to the JMS?

HI
There is no relationship betweenSLD config and error you are receiving.
As mentioned you might be interfacing with XI/PI for pushng/pulling some information , in that case it is necessary to provide username and password.
May be you want to concerns the responsible person who has configured the interfacing scenario
Regards,

BDOCs in status E01 - Technical Error

We are using CRM 7.0 with service order.
We have BDOCs that created automatically after creation of service order or changing in BP details and got stuck in the system and were not processed (SMW03) .
The BDOCs types:
BUPA_MAIN
BUS_TRANS_MSG
These BDOCs entered into queues in SMQ2 in status ready.
In order these BDOCs will be read automatically, we registered the queues which started with CSA* in SMQR.
Unfortunately, the BDOCs still not processed and now in status E01 u2013 Technical Error (incomplete).
The messages are for each type (BUPA_MAIN and BUS_TRANS_MSG respectively) are:
u201CCould not determine module name: BUPA_MAIN GENKEY: REP_GET_RECIPIENTu201D
u201CService that caused the error: SMOH_REPLICATION_WRAPPER_MSGu201D
Could not determine module name: BUS_TRANSACTION_MESSAGE GENKEY: REP_GET_RECIPIENTu201D
u201CService that caused the error: SMOH_REPLICATION_ERAPPER_MSGu201D
It is important to mention that these BDOCs were not deleted in order not damage data that suppose to be uploaded to the BI.
Due to security issues, we cannot provide connection to the system.
Please advice
Best regards,
Hanoch Aharoni

Hi Hanosh
Please see bleow, this is an extract from very helpful document attached to note 768503 for the E01 bdocs status:
Description
Technical error. If any of the flow services fail a technical error is raised. Possible reasons
for that error are:
- Data inconsistencies (e.g. between CRM and CDB)
- Implementation and programming errors
- Missing functionality (implementation problems)
Inbound
s-flow
(SI1)
Detection:
Select BDoc message, click button u2018Errorsu2019 and u2018Classical Datau2019
Possibly the inbound s-flow definition (transaction SMO8FD) is not correct
(services do not exist or have syntax error) or the rejection handling in case
of validation errors is not correct.
Solution:
- If no validation errors and no receiver errors exist, retry to process the
message. Otherwise (if no retry possible) correct the error, send the changes
from the sender site (usually Mobile Client) again if possible or request the
data from the leading system to the different receivers and mark the original
failed BDoc message to u201Cdeletedu201D.
Inbound
m-flow
(MI0)
Detection:
Select BDoc message, click button u2018Errorsu2019:
- No validation function defined for BDoc type
- Technical error occurred: Service (usually validation service), BDoc type <>,
BDoc <>
Solution:
Check in table SMW3BDOCIF if the validation module is entered for the
BDoc type. If no retry is possible correct the error, request the message from
the sender system and set the original failed BDoc to u201Cdeletedu201D.
If the error occurs during the call of the validation module, start the
debugging mode, restart the BDoc processing and put a breakpoint at the
validation module. This requires knowledge in the implementation of the
validation module (and application logic). Look for notes related to that
function module, if this is a SAP standard function.
E01
Outbound
m-flow
(MO1)
Detection:
Select BDoc message, click button u2018Errorsu2019:
- Technical error occurred: Service <>, BDoc type <>, Message <>
- Service that caused the error: <>
Solution:
Find a solution to the errors that occurred, for example through SAPNet Note
search or opening a SAPNet problem message on the corresponding
application component. The right application component can be found in the
corresponding properties of the package where the service is implemented
(use transaction SE37 to display the attributes of that function module).
Possibly there is something wrong inside the Mobile Bridge or in the following
services of the s-flow (like CDB update).
Re-process the message (this is allowed for testing purposes; be careful in
the case of a production system, especially if the data in the BDoc message
is not current) or request the data from the sender or from the original system
(this is usually possible for master data but not always for transactional data).
==================================================================
Best regards
Christophe

Error in XI: Technical Error

Similar Messages

Maybe you are looking for