ERROR in XI TO BI INTEGRATION PSA in yellow status

Hi, I have a scenario of XI 2 BI (JDBC to ABAP proxy), I have done the configuration and in SXMB_MONI it is showing processed successfuly. in BI Side message is succesful in SXMB_MONI
but PSA Data is not updating. when i go to t code RSA1 and then manage PSA , there status is yellow
"process is not yet complete" while i can see datais inserted in the table
can anybody tell me what change should we done so that we can receive green status in PSA.
regards

Hi Sandeep,
Please have a look at the following links and see if it helps
Re: data can not be loaded into PSA iva process chain
Re: Yellow flag in PSA and Cube for full load mean?
Best Regards

Similar Messages

Error when loading the data from PSA to ODS......

Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.

hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil

Error while installation of Outlook Integration Add On

Hi Experts,
Problem encountered upon installation of outlook add-on
The message box shows "The Procedure point ??OCBFDbDef@@QAE@....... could not be located in dynamic link library BFFramework.dll".
I'm watching this thread . I cannot open the link for the proposed solution to my problem.
[Error while installation of Outlook Integration Add On]
Please provide updated link
Regards,
Sandra
Edited by: Sandra Callanta on Sep 15, 2009 10:55 AM
Edited by: Sandra Callanta on Sep 15, 2009 10:56 AM

Hi Sandra,
You may check SAP Note Number: 953357 instead. The title for the note is: Troubleshooting Add-ons in Business One.
Thanks,
Gordon

Error: System not configured as Integration Engine

Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar Agarwal

Hi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use <b>service</b>=<SENDERSERVICE>instead of
<b>bs</b>=<SENDERSERVICE> parameter in your URL.
<b>bs</b> is replaced by <b>service</b> in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?<b>service</b>=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani

Error while XI and xMII integration (Plain HTTP as sender)

Dear Friends,
   I am doing the scenario XI and xMII integration. While sending the input file from plain HTTP adapter the result comes as follows in *sxmb_moni* :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1/>
<SAP:P2/>
<SAP:P3/>
<SAP:P4/>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace=""/>
<SAP:Stack/>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
In HTTP Client Adapter for XI 3.0 it is shown as follows:
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL
</SAP:Code>
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: <xMII server name> </SAP:AdditionalText></SAP:Error>
Please show the way to rectify this error.
Regards,
Jagan.

Dear Sudharshan,
   I'm doing the scenario which is in the following blog.
/people/dhanabal.thangavel/blog/2008/02/07/xi-and-xmii-integration--part-1 ==> XI and xMII Integration - Part 1
This is a synchronous one. So I set QOS as BE in Client Http Adapter for XI 3.0.
Scenario is HTTP <--> XI <--> xMII
The following errors are I found:
1) In RWB -> Message Monitoring
Status : Canceled with Errors
Message Details:
SOAP : call failed
SOAP :error occured: java.net.UnknownHostException: <HOST>
Exception caught by adapter framework: <HOST>
Delivery of the message to the application using connection AFW failed, due to: <HOST>. Setting message to status failed
The message status set to FAIL.
Returning synchronous error message to calling application: <HOST>.
2) Error coming in the Client Http Adapter for XI 3.0 as follows:
*URL:*
http://xxxxxx07:xx10/sap/xi/adapter_plain?namespace=http%3A//www.xxxxxxx.com/XIBatch3/10099/xMII_Integration&interface=xMII_Integration_Sync_Outbound&service=BS_BATCH3&party=&agency=&scheme=&QOS=BE&sap-user=xxxxx&sap-password=xxxxx&sap-client=xx1&sap-language=EN
*Result:*
<SAP:Error><SAP:Category>XIAdapterFramework</SAP:Category><SAP:Code>MESSAGE.GENERAL</SAP:Code><SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException:<HOST></SAP:AdditionalText></SAP:Error>
*Input XML file:*
<?xml version="1.0" encoding="UTF-8"?>
<ns1:XacuteRequest xmlns:ns1="http://www.lighthammer.com/Xacute">
   <ns1:LoginName/>
   <ns1:LoginPassword/>
   <ns1:InputParams>
      <ns1:ProductName>ProductA1</ns1:ProductName>
   </ns1:InputParams>
</ns1:XacuteRequest>
*WSDL file (Which is generated using the xMII transaction):*
<?xml version="1.0" encoding="UTF-8"?><definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://www.lighthammer.com/Xacute" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://www.lighthammer.com/Xacute">
    
    <types>
        <s:schema elementFormDefault="qualified" targetNamespace="http://www.lighthammer.com/Xacute">
            <s:complexType name="InputParams">
                <s:sequence id="InputSequence">
                <s:element maxOccurs="1" minOccurs="0" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteRequest">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginName" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="LoginPassword" type="s:string"/>
                        <s:element maxOccurs="1" minOccurs="0" name="InputParams" type="s0:InputParams"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
            <s:complexType name="Rowsets">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="0" name="FatalError" type="s:string"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Messages" type="s0:Messages"/>
                    <s:element maxOccurs="1" minOccurs="0" name="Rowset" type="s0:Rowset"/>
                </s:sequence>
                <s:attribute name="StartDate" type="s:dateTime" use="required"/>
                <s:attribute name="EndDate" type="s:dateTime" use="required"/>
                <s:attribute name="DateCreated" type="s:dateTime" use="required"/>
                <s:attribute name="Version" type="s:string"/>
            </s:complexType>
            <s:complexType name="Messages">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Message" type="s:string"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Columns">
                <s:sequence>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Column" type="s0:Column"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Column">
                <s:attribute name="Name" type="s:string" use="required"/>
                <s:attribute name="Description" type="s:string" use="required"/>
                <s:attribute name="SourceColumn" type="s:string" use="required"/>
                <s:attribute name="MinRange" type="s:double" use="required"/>
                <s:attribute name="MaxRange" type="s:double" use="required"/>
                <s:attribute name="SQLDataType" type="s:int" use="required"/>
            </s:complexType>
            <s:complexType name="Rowset">
                <s:sequence>
                    <s:element maxOccurs="1" minOccurs="1" name="Columns" type="s0:Columns"/>
                    <s:element maxOccurs="unbounded" minOccurs="0" name="Row" type="s0:Row"/>
                </s:sequence>
            </s:complexType>
            <s:complexType name="Row">
                <s:sequence id="RowSequence">
                <s:element maxOccurs="1" minOccurs="1" name="Quantity" type="s:long"/><s:element maxOccurs="1" minOccurs="1" name="ProductName" type="s:string"/></s:sequence>
            </s:complexType>
            <s:element name="XacuteResponse">
                <s:complexType>
                    <s:sequence>
                        <s:element maxOccurs="1" minOccurs="0" name="Rowsets" type="s0:Rowsets"/>
                    </s:sequence>
                </s:complexType>
            </s:element>
        </s:schema>
    </types>
    
    <message name="XacuteSoapIn">
        <part element="s0:XacuteRequest" name="parameters"/>
    </message>
    <message name="XacuteSoapOut">
        <part element="s0:XacuteResponse" name="parameters"/>
    </message>
    
    <portType name="XacuteWSSoap">
        <operation name="Xacute">
            <input message="s0:XacuteSoapIn"/>
            <output message="s0:XacuteSoapOut"/>
        </operation>
    </portType>
    
    <binding name="XacuteWSSoap" type="s0:XacuteWSSoap">
        <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
        <operation name="Xacute">
            <soap:operation soapAction="http://www.lighthammer.com/Xacute" style="document"/>
            <input>
                <soap:body use="literal"/>
            </input>
            <output>
                <soap:body use="literal"/>
            </output>
        </operation>
    </binding>
    
    <service name="XacuteWS">
        <port binding="s0:XacuteWSSoap" name="XacuteWSSoap">
            <soap:address location="http://<XMII_SERVER_NAME>/Lighthammer/SOAPRunner/Jagan/SDN_Fetch_Product_Qty"/>
        </port>
    </service>
</definitions>
Regards,
Jagan.

HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1

Hello I have problems with my HP TouchSmart iq512sc error with windows 7 SoundMAX Integrated Digital HD Audio 5.1 surround sound receiver conete SPDIF after update from vista 64 bit to windows 7 began this problem
only nomal audio but no support from the surround sound of 5.1 channel SPDIF what the error may attend
I hope you can help me
Sincerely,
Steve

maybe your spdif default properties, in the supported format tab, options there are configured too high for your revceiver???
is there an error code on your receiver? if there is an error code check the troubleshooting section in the manual your receiver came with.
you could also try in windows media center, go to the tasks->settings and click windows media center setup->setup your speakers for 5.1 and hit the test button..
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Dyncamics Connector Error CRM to NAV, no integration record within filter

In working to connect CRM Account records to the NAV Contact Card as Companies, experiencing an inner exception error that there is no integration record within the filter. Searching for a solution has not turned up a solid answer to path to resolution.
We are mapping basic data fields; address/city/state/zip/email/website/account name/account number/... The only required fields in NAV on the Contact Card are No and Name which we populate. The Account record from CRM does get created in NAV on
the Contact Card BUT updates within those data fields will not take and we get these errors (#1 & #2) in sequence. Error #3 below comes from an attempt at updating a field's data to sync from CRM Account to NAV after receiving errors
#1 & #2. It should be noted that the we are trying to send the Account record to Contact Card then to Customer Card. The Customer Card record is created without issue, but we believe error #3 may be fallout from the exception error #1.
1) WARNING TID:18 [2013-09-23T11:19:02.5269850-05:00]: [Account to NAV Contact Card] has encountered an error while processing key [[Test Company, 59057fb9-2cdb-e111-86eb-00155d006a06]]. Exception occurred in Microsoft Dynamics NAV
--- Exception Dump ---
Caught Exception: Exception occurred in Microsoft Dynamics NAV
Stack trace:
   at Microsoft.Dynamics.Integration.Adapters.Nav2009.NavObjectProvider.WriteObject(Object value)
   at Microsoft.Dynamics.Integration.Service.MapThread.ProcessReads()
Inner Exception: There is no Integration Record within the filter.
Filters: Record ID: Contact: 88888
Stack trace:
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at Microsoft.Dynamics.Integration.Adapters.Nav2009.NavIntegrationHelper.InvokeUpdateMethod(Object& newobj, Boolean create, String integrationId, Boolean updateIntegrationId)
   at Microsoft.Dynamics.Integration.Adapters.Nav2009.NavIntegrationHelper.DoUpdate(Object newobj, Object obj, String integrationId, Boolean create, Boolean hasExistingLines)
   at Microsoft.Dynamics.Integration.Adapters.Nav2009.NavIntegrationHelper.DoWrite(Object newobj)
   at Microsoft.Dynamics.Integration.Adapters.Nav2009.NavObjectProvider.WriteDynamicObject(Object value)
   at Microsoft.Dynamics.Integration.Adapters.Nav2009.NavObjectProvider.WriteObject(Object value)
2) [Account to NAV Contact Card] has encountered an error while processing key [[Test Company, 59057fb9-2cdb-e111-86eb-00155d006a06]]. The record already exists.
3) [Account to NAV Contact Card] has encountered an error while processing key [[Test Company, 59057fb9-2cdb-e111-86eb-00155d006a06]]. Table Id 18 of a supplied key does not match Table Id 5050 of the page 5050 source table.
Any direction to resolution would be much appreciated.
Thanks,
Troy

May have isolated the cause to the Type field on the Contact Card in NAV not accepting a "Company" value as sent through the Connector. There are two values on the Contact Card for Type, Person/Company, where Person is accepted during send to create
an Integration Record but Company is not (even using it as the designed default doesn't work).
Has anyone experienced NAV not accepting the Type code of Company on the Contact Card through the Connector from CRM Accounts which in turn stops the creation of an Integration Record for the Account?
Any help or input would be very beneficial. Thanks.

PSA load remains in yellow status.

Hi Gurus,
I have created a generic datasource based on function module.
I have replicated the datasource in SAP BI dev instance.
I have even checked the extractor checker in R/3 and it shows 381 records.
On BI side I am loading data upto PSA.When I execute the infopackage for full load in the monitor screen I could see
"381 out of 0 records".The request remains in yellow status.
The idoc status in source system side is 03 and on BI side is 53.
I dont get any error message.Even I am not seeing idocs with red status in SM58 tcode.No logs are seen in sm21.
I even asked the basis team to check for RFC connection SM59 and partner profile.Every thing looks fine .
This loading issue is only happening with this specific datasource(ie datasource created on function module).
For other datasources load are carried out fine.
Has anybody faced a similar issue?.Please help in this regard.

seems the load is hung bcoz of thehung IDOCs.
Process the idocs manually. after
check the below things
--> Check weather the source system job finished or not?
If the job is finished check the TRFCs are processed or not?
In the monitor screen - menu bar --environment -->job overview (to check the job) -->TRFcs - to check the TRFCs.
Check for short dumps using transaction ST22.
-->Check for the Idocs in BD87 and if there are any IDOCs got stuck process them manually.
To process Idocs first change the status of request to red and try to process them in the background.

Load to psa is in yellow status only in quality n production system

Hi All,
We have created a generic FM which wil take date parameter as input and fetch records for that specific month. This FM works perfectly fine in dev server, but when i run the same in quality and production the load status is still in yellow status.
FYI, data records are fetched/extracted correctly and data package individually is in green status. But under extraction flow i see the following message " Missing message: Selection completed " at this stage the status is in yellow.
If i check the job in r/3 system then the last job log entry is
" Asynchronous transmission of info IDoc 3 in task 0003 (1 parallel tasks) "
Kindly suggest what can be done here to resolve this. We have stuck for quite long on this.
Thanks & Regards,
Anup

hi
debug the FM program , if you wont find any then try this.
you may missing messages in extraction process
try this
trun load to red and re-start and check the source system extraction process also check in the source system envio t Rfc-- in the source system ( to know the status)
Missing message: Selection completed
Error: 'Missing message: Selection completed' - URGENT
http://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=153780896
Data Loads into BI system
check this may help you.
Edited by: Srikanth.T on Dec 22, 2011 9:47 AM

PSA request is in yellow status

Hi
We got the problem when loading the 2LIS_03_BF data into cube. We have around 4 cubes and 2 ods.
The data got loaded into all the cubes and ods except on Cube. There was a problem of table space and now it is solved.
Now the request is in yellow status in PSA. It cube it shows no of records added and transferred but the status is in red color.
How can i upload the delta data into the cube from PSA when PSA request is in yellow color.
I feel strange that when the request is in yellow color how come the data is loaded into all other cubes.
REgards
Annie

You should be able to load request from PSA to data target using the option available in PSA. When you manage on Datasource, you see all requests. You can select that PSA request and use Scheduler option in that screen to update that particular request. It will run infopackage as usual. It will execute all the routines if there are any in update rules.
When you say you have some programs running in process chain, they must be after this failed load right?
If that is the case, all you need to do is push process chain further. Below are steps to push process chain further if you any step is stuck in yellow or if mually carry out any red step in process chain. In you case, load that failed step manually using scheduler form PSA manage tab and then push PC further using these steps. That will continue PC further and run any programs that run after load.
Execute in SE38 -> RSPC_PROCESS_FINISH
Fill the following parameters on screen and rest all can be left blank.
1. LOGID - you will find this when you do monitor of your process chain. Every time you run process chain, unique LOGID is created.
2. TYPE - If step is ODS activation then TYPE wud be ODSACTIVAT and if it is infopak loading TYPE wud be LOADING and if it is DTP Load TYPE wud be LOAD. In your case it will be LOADING.
3. VARIANT - In the process chain monitor mode, right click on step which you executed manually -> Display Messages. Go to chain tab and there you will find VARIANT
4. INSTANCE - In the process chain monitor mode, right click on step which you executed manually -> Display Messages. Go to chain tab and there you will find INSTANCE
5. STATE - Value wud be G
After entering above parameters, click execute. It will be done in fraction of second and wont give any popup. Now when you will check process chain monitor, you will see that step 4 is green and next step has started executing.
Abhijit

Error: Service process cannot be confirmed due to its status

Hi Experts,
we want to create a Service Notification (BUS2000117) as a follow-up document of a service order (BUS2000116). The problem is that we receive the following error:
Service process cannot be confirmed due to its status
*Diagnosis*
You cannot enter a confirmation for the service process due to its status.
*System Response*
To enable you to enter a confirmation for a service process, it must be released and may not yet have the status Closed .
*Procedure*
Check the service process status and if necessary, change it.
How can i shut off the control of the status as we need to create service confirmation of service orders which are still in process. Is there any customizing?
Best Regards
Oliver

To solve the problem without using the note it is possible to change customizing.
Customer Relationship Management -> Transactions -> Status Management -> Define Status Profile for User Status:
In Transaction Control is has to be assigned the Business Transaction 'To be distributed' to the relevant status.
Afterwards the service notification can be created without problems.

SM13 - Error in Collect.Run - Yellow status update records.

Hello,
After some problems with update queues in R/3, we have some update records in yellow status "Error in collective run" in sm13 t-code.
If we run collective run, new records are pushed into rsa7, but this yellow status records won't move, and we actually need them.
Does anyone know how to process this errors?

Hi,
There is no problem with background process, the new update records are being processed with no problem.
These update records remain in yellow status since yesterday, but new records are being processed.

Error after uninstalling the SAP Integration Kit XI 3.0 on Unix

Hi all,
I have uninstalled the SAP Integration Kit XI 3.0 on a single solaris server installation. Uninstall was done exactly as instructed in the manual and everything looked ok.
Now when I try to go to the login page of CMC or InfoView I get an error:
type Status report
message /PartnerPlatformService/service/app/logon.do
description The requested resource (/PartnerPlatformService/service/app/logon.do) is not available.
Is the login page trying to look for the SAP authentication page that was removed ?
Is there some configuration still remaining somewhere that needs to be removed so I get the old login page back ?
Thanks for ideas, Timo

Thanks for pointing to the right direction. I changed the tomcat webapps web.xml file parameter and it was enought to start working again.
   <context-param>
        <param-name>config.logon.service.context</param-name>
        <param-value>/PlatformServices</param-value>
    </context-param>

Error while running maintenace plan "Integration Services evaluation period has expired."

We are getting below mentioned error while executing SSIS package or maintenance plan.
Executed as user: ICROSSING\*****. Microsoft (R) SQL Server Execute Package Utility
Version 11.0.3381.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.
Started: 3:35:00 PM Error: 2014-02-23 15:35:01.56
Code: 0xC0000033     Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Error: 2014-02-23 15:35:01.58
Code: 0xC0000033     Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Could not execute package because of error 0xC0000033.
Started: 3:35:00 PM Finished: 3:35:01 PM
Elapsed: 0.671 seconds. The command line parameters are invalid.
The step failed.
We have license BI edition of sql server 2012. Other services and database are working fine. Issue with integration service only.
Please help me sort out the issue.
Thanks,
Shitalkumar Kasliwal

Hi Shitalkumar,
The issue may occur if Evaluation Edition or CTP Edition of SQL Server was installed earlier on the server, however, the previous instance of SQL Server was not uninstalled completely or upgraded to Business Intelligence Edition successfully. To resolve
the issue, modify the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\110\ConfigurationState registry key value from 1 to 3, and then rerun the Edition Upgrade procedure from the SQL Server install media to upgrade the SQL Server components to the
licensed edition again.
Reference:
http://support.microsoft.com/kb/971268
Regards,
Mike Yin
TechNet Community Support

Error while Running Graph in Integrator

Hi I am new to the whole world of Java so kindly let me know if this is a noob question. While Running Graphs from the Getting Stated data package in Endeca Integrator I am getting the following wrror, can someone please let me know how to fix this:
[Fatal Error] :1:1: Content is not allowed in prolog
Thanks,
Naman

If you have addition error detail or stack-traces, please consider posting those.
Verify that you have not unintentionally corrupted your project XML files, especially by editing them with a rogue editor, e.g. Windows Notepad is known to add a BOM to a file if you save as UTF-8.

ERROR in XI TO BI INTEGRATION PSA in yellow status

Similar Messages

Maybe you are looking for