Error in XL reporter installation

Dear Friends,
I am facing the problem in XL Reporter installation.
While I was trying to install XL reporter add on in server, I am getting error.
System error message was u201CMicrosoft XL is required but not installed erroru201D
Can anyone face this same problem in XL reporter Installation?
Kindly help me to resolve this problem.
Thanks in advance,
Regards,
Senthil Maruthappan.
Team work never fails.

Sridharan,
As your suggestion, I have tried to install SP 01 patch level 30 in my server.
XL Reporter Add u2013on Installed perfectly in my  server now.
Thanks once again.
Regards,
Senthil Maruthappan.
Team work never fails.

Similar Messages

  • Error with crystal report using SAP GUI

    Hi,
    While using crystal report in sap gui i get the following error. I already googled and only found one thing on this forum that talks about this and it was never solve. Can you please help me? Thank you
    Errors in Crystal Reports Installation(SupportsSAPQuery)
    Message no.ALVHT218
    Diagnosis:
    This function requires that Seagate Crystal Reports and the Functional Area drivers(InfosetDrivers) from Seagate software are installed.
    This sotware is either not available on your frontend or has been installed with errors
    System Response:
    The action has been terminated
    Once again
    thank you

    Hi
    Please check if you have installed all the SAP transports which are required for Crystal Reports to run based off SAP.
    Regards
    Sourashree

  • Getting "The product key is not valid. INS00140" error during Crystal Report 2013 installation

    We are getting “The product key is not valid. INS00140” error during Crystal Report 2013 installation. We are trying to install crystal report on Windows 7 64 bit OS.
    Can anyone help?

    What is CrystalReportsJava-2013? Where did this come from - download link? CD?
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
      Follow us on Twitter

  • Creating FRCommon system failed - in 11g Forms & Report Installation

    Dear all,
    When installing 11g Forms and Reports "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
    I have successfully created the weblogic server 10.3.5 , and continued with 11g forms & reports. First Installed the forms & reports software, and i try to configure. after several steps of configuration i have failed when its place "*Creating FRCommon system failed - in 11g Forms & Report Installation*".
    What it is this Error.
    Kindly help me.
    My OS Windows
    Forms and reports 11gR2
    More info
    When i start the configuration i have chosen Forms & Reports server and Development tools in the configuration page along with OHS.
    Regards
    Hamid

    Hi experts,
    I have the same problem when I try to install oracle Fusion Middleware 11g, is it possible that I forget some steps before, or should I install required something before continue intallation?
    Best Regards.
    Karim.

  • Error on Bursting Report for BI Publisher

    hi all,
    i am getting the following error when i am bursting the report for BI Publisher.
    * Nested Exception (Underlying Cause) ---------------
    oracle.apps.xdo.servlet.scheduler.ProcessingException: java.lang.NullPointerExce
    ption
    at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
    a:2116)
    at oracle.apps.xdo.servlet.scheduler.XDOJob.execute(XDOJob.java:358)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:195)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.j
    ava:520)
    Caused by: java.lang.NullPointerException
    at com.sun.java.util.collections.Hashtable.get(Hashtable.java:321)
    at oracle.apps.xdo.batch.bursting.ProcessEnterpriseDocument.processLayou
    t(Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unkno
    wn Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(
    Unknown Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.endDocument(Unknown Sou
    rce)
    at oracle.xml.parser.v2.XMLContentHandler.endDocument(XMLContentHandler.
    java:119)
    at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
    arser.java:311)
    at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:263)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown
    Source)
    at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
    at oracle.apps.xdo.servlet.scheduler.XDOJob.runBurstingReport(XDOJob.jav
    a:2008)
    ... 3 more
    Kindly Help..
    Thanks.

    Thanks alot Guru for u r reply, i am attaching more Details regarding my error.
    In Reporting options i gave
    Reporting folder CCB
    Reporting server:BIPUbliser url
    Reporting password:Admin     
    Reproting userid:Admin
    I already configured Bill Display Algorithm OBLD_CRYS in installation-frame work
    Now i am getting the error the value in the field is not a valid value for the field.
    In Console I am getting the error '
    SYSUSER - 612791-31-1 2011-05-26 11:32:21,709 [[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR (schema.rules.BusinessObjectRuleProcessor$Factory) There is more th
    an 1 MO for the service 'CILCSVAP': MaintenanceObject_Id(SA), MaintenanceObject_Id(CM_CONT), using 1st one 'MaintenanceObject_Id(SA)'
    <May 26, 2011 11:32:22 AM IST> <Error> <HTTP> <BEA-101020> <[ServletContext@4736418[app:SPLWeb module:/spl path:/spl spec-version:2.5]] Servlet failed with Exception
    com.splwg.shared.common.ApplicationError: (Server Message)
    Category: 3
    Number: 501
    Call Sequence: ;CIPCSVAP
    Program Name: CIPCSVAP
    Text: You are not allowed access (directly/indirectly) to this account.
    Description: Please contact your security administrator to check your security for this account.
    Table:
    Field:
    at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1177)
    at com.splwg.base.support.context.FrameworkSession.addError(FrameworkSession.java:1158)
    at com.splwg.base.support.cobol.CobolSubprogram.populateError(CobolSubprogram.java:142)
    at com.splwg.base.support.cobol.CobolSubprogram.checkForErrors(CobolSubprogram.java:94)
    at com.splwg.base.support.cobol.AbstractCobolProgram$CallCobolClosure.run(AbstractCobolProgram.java:214)
    Truncated. see log file for complete stacktrace

  • Getting error while generating report from Siebel (Siebel/BI Publisher)

    Dear,
    I have completed the integration of siebel and BIP according to the oracle document, I successfully upload the sample template from siebel application to BIP server.
    But now I am facing two issues,
    I am getting error "Unauthorized access, Please contact the administrator."  when I open report on BIP which I have uploaded from siebel.
    When I try to generate report from siebel=>application=>Tables=>S_Contact I am getting the below error when click on table report from Report button.
    (httptransport.cpp (1635)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
    (httptransport.cpp (983)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
    (soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.xdo.webservice.exception.InvalidParametersException'  for operation 'runReport' exists in SOAP message.
    (outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.xdo.webservice.
    Invalid User Name and Password for BIP Server
    (xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
    Error in generating Report Output file /siebel8/sea81/siebsrvr/siebel8/sea81/siebsrvr/xmlp/reports/Rept11-3U7M403.PDF in the XMLP Engine
    (xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
    Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
    ( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
    (bsvcmgr.cpp (1392) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
    (bsvcmgr.cpp (1236) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
    (smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
    Please help to resolve this issue.
    Regards,
    Soahil

    This specifically means that the destinations have not been configured in the Crystal Job Server.  If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server.  If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
    You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations".  You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save.  Stop the job server, start it again, and your error should go away.
    Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
    -Dell

  • An error occurred during the installation of assembly 'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information. HRESULT: 0x80070003.

    I received the above error reinstalling SQL Server 2008.  I have tried all suggestions.  This error also appears when I install any version of SQL Server.
    I have also installed;
    Microsoft® .NET Framework Version 2.0.50727.4927
    Microsoft® .NET Framework Version 4.0.31106.0
    Microsoft® .NET Framework Version 3.0.6920.50
    Microsoft Visual C++ 2005 Redistributable (x64) 8.0.59192
    Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
    Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
    Microsoft Visual C++ 2010 x64 Redistributable 10.0.40219
    Microsoft Visual C++ 2010 x86 Redistributable 10.0.40219
    Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
    Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
    Overall summary:
      Final result:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
    rerun SQL Server Setup.
      Exit code (Decimal):           -2068052081
      Exit facility code:            1212
      Exit error code:               1935
      Exit message:                  SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
    rerun SQL Server Setup.
      Start time:                    2014-02-23 19:17:20
      End time:                      2014-02-23 19:21:35
      Requested action:              Install
      Log with failure:              C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SqlSupport_KatmaiRTM_Cpu64_1.log
      Exception help link:           http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.1600.1
    Machine Properties:
      Machine name:                  OHPC
      Machine processor count:       2
      OS version:                    Windows 7
      OS service pack:               Service Pack 1
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x64
      Process architecture:          64 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
    Package properties:
      Description:                   SQL Server Database Services 2008 R2
      ProductName:                   SQL Server 2008 R2
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         H:\SQLServer2008R2_SP1\x64\setup\
      Installation edition:          DEVELOPER
    User Input Settings:
      ACTION:                        Install
      ADDCURRENTUSERASSQLADMIN:      False
      AGTSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      AGTSVCPASSWORD:                *****
      AGTSVCSTARTUPTYPE:             Manual
      ASBACKUPDIR:                   Backup
      ASCOLLATION:                   Latin1_General_CI_AS
      ASCONFIGDIR:                   Config
      ASDATADIR:                     Data
      ASDOMAINGROUP:                 <empty>
      ASLOGDIR:                      Log
      ASPROVIDERMSOLAP:              1
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      ASSVCSTARTUPTYPE:              Automatic
      ASSYSADMINACCOUNTS:            <empty>
      ASTEMPDIR:                     Temp
      BROWSERSVCSTARTUPTYPE:         Disabled
      CONFIGURATIONFILE:             C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
      CUSOURCE:                      
      ENABLERANU:                    False
      ENU:                           True
      ERRORREPORTING:                False
      FARMACCOUNT:                   <empty>
      FARMADMINPORT:                 0
      FARMPASSWORD:                  *****
      FEATURES:                      SQLENGINE
      FILESTREAMLEVEL:               0
      FILESTREAMSHARENAME:           <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      IACCEPTSQLSERVERLICENSETERMS:  False
      INDICATEPROGRESS:              False
      INSTALLSHAREDDIR:              C:\Program Files\Microsoft SQL Server\
      INSTALLSHAREDWOWDIR:           C:\Program Files (x86)\Microsoft SQL Server\
      INSTALLSQLDATADIR:             <empty>
      INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
      INSTANCEID:                    MSSQLSERVER
      INSTANCENAME:                  MSSQLSERVER
      ISSVCACCOUNT:                  NT AUTHORITY\NetworkService
      ISSVCPASSWORD:                 *****
      ISSVCSTARTUPTYPE:              Automatic
      NPENABLED:                     0
      PASSPHRASE:                    *****
      PCUSOURCE:                     
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      ROLE:                          <empty>
      RSINSTALLMODE:                 FilesOnlyMode
      RSSVCACCOUNT:                  <empty>
      RSSVCPASSWORD:                 *****
      RSSVCSTARTUPTYPE:              Automatic
      SAPWD:                         *****
      SECURITYMODE:                  <empty>
      SQLBACKUPDIR:                  <empty>
      SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
      SQLSVCACCOUNT:                 NT AUTHORITY\SYSTEM
      SQLSVCPASSWORD:                *****
      SQLSVCSTARTUPTYPE:             Automatic
      SQLSYSADMINACCOUNTS:           OHPC\Robert
      SQLTEMPDBDIR:                  <empty>
      SQLTEMPDBLOGDIR:               <empty>
      SQLUSERDBDIR:                  <empty>
      SQLUSERDBLOGDIR:               <empty>
      SQMREPORTING:                  True
      TCPENABLED:                    0
      UIMODE:                        Normal
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\ConfigurationFile.ini
    Detailed results:
      Feature:                       Database Engine Services
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    Scenario specific rules:
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140223_191513\SystemConfigurationCheck_Report.htm
    SFC/ Scannow
    2014-02-23 19:08:22, Info                  CSI    0000016f [SR] Verifying 100 (0x0000000000000064) components
    2014-02-23 19:08:22, Info                  CSI    00000170 [SR] Beginning Verify and Repair transaction
    2014-02-23 19:08:23, Info                  CSI    00000172 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:23, Info                  CSI    00000174 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:26, Info                  CSI    00000176 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:26, Info                  CSI    00000177 [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
    2014-02-23 19:08:26, Info                  CSI    00000179 [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
    source file in store is also corrupted
    2014-02-23 19:08:27, Info                  CSI    0000017c [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:08:27, Info                  CSI    0000017d [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
    2014-02-23 19:08:27, Info                  CSI    00000180 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
    source file in store is also corrupted
    2014-02-23 19:08:27, Info                  CSI    00000182 [SR] Verify complete
    2014-02-23 19:12:33, Info                  CSI    00000326 [SR] Verifying 100 (0x0000000000000064) components
    2014-02-23 19:12:33, Info                  CSI    00000327 [SR] Beginning Verify and Repair transaction
    2014-02-23 19:12:33, Info                  CSI    00000329 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:12:35, Info                  CSI    0000032b [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:12:35, Info                  CSI    0000032c [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
    2014-02-23 19:12:35, Info                  CSI    0000032f [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
    source file in store is also corrupted
    2014-02-23 19:12:36, Info                  CSI    00000331 [SR] Verify complete
    2014-02-23 19:13:14, Info                  CSI    0000035d [SR] Repairing 3 components
    2014-02-23 19:13:14, Info                  CSI    0000035e [SR] Beginning Verify and Repair transaction
    2014-02-23 19:13:14, Info                  CSI    00000360 [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000362 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000364 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000366 [SR] Cannot repair member file [l:26{13}]"x86_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:14, Info                  CSI    00000367 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-3_neutral_GDR"
    2014-02-23 19:13:15, Info                  CSI    0000036a [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:26{13}]"x86_installed";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    0000036c [SR] Cannot repair member file [l:20{10}]"wscsvc.dll" of Microsoft-Windows-SecurityCenter-Core,
    Version = 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:15, Info                  CSI    0000036d [SR] This component was referenced by [l:242{121}]"Microsoft-Windows-Client-Features-Package~31bf3856ad364e35~amd64~~6.1.7601.17514.Microsoft-Windows-Client-Features-Update"
    2014-02-23 19:13:15, Info                  CSI    0000036f [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\Windows\System32"\[l:20{10}]"wscsvc.dll";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    00000371 [SR] Cannot repair member file [l:30{15}]"amd64_installed" of Microsoft-Windows-ServicingStack,
    Version = 6.1.7601.17592, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
    2014-02-23 19:13:15, Info                  CSI    00000372 [SR] This component was referenced by [l:154{77}]"Package_2_for_KB2533552~31bf3856ad364e35~amd64~~6.1.1.1.2533552-4_neutral_GDR"
    2014-02-23 19:13:15, Info                  CSI    00000375 [SR] Could not reproject corrupted file [ml:520{260},l:94{47}]"\??\C:\Windows\Servicing\Version\6.1.7601.17592"\[l:30{15}]"amd64_installed";
    source file in store is also corrupted
    2014-02-23 19:13:15, Info                  CSI    00000377 [SR] Repair complete
    2014-02-23 19:13:15, Info                  CSI    00000378 [SR] Committing transaction
    2014-02-23 19:13:15, Info                  CSI    0000037c [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction 
    have been successfully repaired

    Summary:
    Attempted proposed solution.  Error still appears.
    This is installed:
    Microsoft Visual C++ 2005 ATL Update kb973923 - x86 8.0.50727.4053
    Microsoft Visual C++ 2005 Redistributable               8.0.56336
    Microsoft Visual C++ 2005 Redistributable (x64)         8.0.59192
    Microsoft Visual C++ 2008 ATL Update kb973924 - x86 9.0.30729.4148
    Microsoft Visual C++ 2008 Redistributable - x64 9.0.30729.4148
    Microsoft Visual C++ 2010 x64 Redistributable - 10.0.40219
    Microsoft Visual C++ 2010 x86 Redistributable - 10.0.40219
    Microsoft Visual C++ 2012 Redistributable (x64) - 11.0.60610
    Microsoft Visual C++ 2012 Redistributable (x86) - 11.0.61030
    I reinstalled:
    vcredist_x64 Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) .exe
    vcredist_x86 Microsoft Visual C++ 2005 SP1 Redistributable Package (x86).exe
    Results:
    Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable (x64). Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft
    Corporation. Reconfiguration success or error status: 0.
    Windows Installer reconfigured the product. Product Name: Microsoft Visual C++ 2005 Redistributable. Product Version: 8.0.56336. Product Language: 0. Manufacturer: Microsoft Corporation.
    Reconfiguration success or error status: 0.
    I installed SQLServer2008R2_SP1
    Same error message came up;
    SqlSupport_KatmaiRTM_Cpu64_1.log
    MSI (s) (64:94) [23:03:43:910]: Source for file 'pfbafgaq.dll' is uncompressed, at 'H:\SQLServer2008R2_SP1\1033_ENU_LP\x64\setup\sql2008support\PFiles\SqlServr\100\Setup\Release\x64\'.
    MSI (s) (64:94) [23:03:43:926]: Executing op: SetTargetFolder(Folder=C:\Windows\winsxs\amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.1833_none_8a17faaf2edd3e00\)
    MSI (s) (64:94) [23:03:43:926]: Executing op: SetSourceFolder(Folder=1\Windows\winsxs\nvdlei3o.taa\)
    MSI (s) (64:94) [23:03:43:926]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.1833,ProductCode={B40EE88B-400A-4266-A17B-
    E3DE64E94431},ProductVersion=10.1.2731,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:941]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={071c9b48-7c32-4621-a0ac-
    3f809523288f},ProductVersion=8.0.56336,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\ATL80.dll,FileKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:957]: Executing op: RegisterSharedComponentProvider(,,File=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,Component={837BF1EB-D770-94EB-A01F-
    C8B3B9A1E18E},ComponentVersion=8.0.50727.762,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,PatchSize=0,PatchAttributes=0,PatchSequence=0,SharedComponent=0,IsFullFile=0)
    MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.cat,FileKey=ul_catalog.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:972]: Executing op: CacheRTMFile(SourceFilePath=C:\Windows\WinSxS
    \amd64_microsoft.vc80.atl_1fc8b3b9a1e18e3b_8.0.50727.762_none_ca3f79d486b08636\amd64_Microsoft.VC80.ATL_1fc8b3b9a1e18e3b_8.0.50727.1833_x-
    ww_f19a562a.manifest,FileKey=ul_manifest.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,,ProductCode={D40172D6-CE2D-4B72-BF5F-
    26A04A900B7B},ProductVersion=11.0.0,Attributes=0,,,,CopierFlags=0,,,,,,)
    MSI (s) (64:94) [23:03:43:972]: Executing op: AssemblyCopy(SourceName=uvdlei3o.taa|
    ATL80.dll,SourceCabKey=ul_ATL80.dll.837BF1EB_D770_94EB_FF1F_C8B3B9A1E18E,DestName=ATL80.dll,Attributes=0,FileSize=113152,PerTick=65536,,VerifyMedia=1,ElevateFlags=4,,,,ComponentId=
    {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E},,,,AssemblyMode=0,)
    MSI (s) (64:94) [23:03:43:972]: Assembly Error:The system cannot find the path specified.
    MSI (s) (64:94) [23:03:43:972]: Note: 1: 1935 2: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E} 3: 0x80070003 4: IAssemblyCache 5: CreateAssemblyCacheItem 6:
    Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"
    MSI (s) (64:94) [23:03:43:972]: Assembly Error (sxs): Please look into Component Based Servicing Log located at -169675656ndir\logs\cbs\cbs.log to get more diagnostic information.
    MSI (s) (64:94) [23:03:49:882]: Product: Microsoft SQL Server 2008 Setup Support Files  -- Error 1935. An error occurred during the installation of assembly
    'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
    HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Error 1935. An error occurred during the installation of assembly
    'Microsoft.VC80.ATL,version="8.0.50727.1833",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64",type="win32"'. Please refer to Help and Support for more information.
    HRESULT: 0x80070003. assembly interface: IAssemblyCache, function: CreateAssemblyCacheItem, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    MSI (s) (64:94) [23:03:49:882]: User policy value 'DisableRollback' is 0
    Thanks, Ted U

  • Boot up of Windows Server 2012 Essentials seems slow (extended Please Wait screen) and there are errors in Health Report

    Dear Sir or Madam,
    I have been experimenting with the evaluation version of WS2012e trying to get the installation and subsequent build into an optimal set up, and once I have everything I want it to do mapped out, I'll set it up with the full version with using the key that
    I bought.
    However, I've noticed that the server seems to experience a delay during cold boot - it sits with a Please Wait screen for about 60-90 seconds before it presents the screen with an option to Log on.  I have also discovered from running Health
    Report, that there are some entries in the event logs which appear to coincide with start up times, and which seem to be interconnected to each other in the issues they are describing, and I have copied an example of one of those health reports below. 
    I assume that everything sorts itself out in due course, because the events say the process will be re-attempted and these errors don't repeat again after the system has booted up.  I also have the server set to suspend when not in use with the Lights
    Out add in, so it shouldn't need to cold boot often - but I wondered if there's a way to correct these errors so that they don't hold up the boot up process?  I'm also concerned that these errors will cause me later problems with storage pools and
    the like at a later date - the disk replication one seems particularly worrying.  Alternatively, are these errors just a normal part of the start up process - the timing of when different processes start relative to each other - and can be safely ignored?
    In trying to understand what the events describe, I thought that WE2012e acted as its own Domain Controller, and yet it seems from the event log entries that it is waiting for another server to respond to AD / DC requests (but there isn't another server
    on my home network).  The other thing I remember from when I first tried out WS2012e, is that it took control of DHCP or DNS from the router, and I found that frustrating when waking up my laptop and it wouldn't connect to the internet until the server
    had fully booted up and re-asserted its network settings.  Is this another symptom of the same problem?  I remember seeing a posting at the SBS Diva's site about how to update the server so that it gave connected PCs a backup option for connecting
    to the internet when the server wasn't available, and was going to try to find that again to see if that helped.
    By way of background - there isn't another server in my home network.  This is an attempt to do a clean install onto the same hardware that I ran the initial trial of WS2012e, now that the trial has expired, so I'm not trying to migrate from an existing
    server.  I moved all the data on the trial server off onto an external disk, with the intention of importing it back once I had the Storage Pools set up the way I wanted on the new build, and since I didn't want to keep anything else about the server
    trial.  Am I correct in thinking that I don't need to go down the Migration route during installation, and can go through a Clean install in this circumstance? 
    I'm running on an Asus P8-H77-i motherboard, with an i5-3470s CPU and 16MB RAM, and I have WS2012e installed on 256Mb SSD formatted under GPT with uEFI boot - the latter being the main reason for the reinstall, instead of just giving the Evaluation
    version the new key on the original MBR set up.  I've also enabled Intel Rapid Storage and Rapid Start - and successfully set aside the hibernate partition on the SSD - but discovered that this is about forcing a hibernate after suspend, allowing
    the system to power down until its needed again, and then resuming from hibernate on the SSD rather than cold boot each time.  That seems to work, but doesn't improve the cold boot times at all, which was what I was hoping for - ideally the way my
    laptop will boot from cold in a few seconds into Windows 8. 
    Yours faithfully,
    Avon
    ======
    Health Report extract.
    Critical Errors in Event Logs in Last 24 Hours
     DFSR
    Event ID: 3221226674
    The DFS Replication service failed to contact domain controller  to access
    configuration information. Replication is stopped. The service will try again
    during the next configuration polling cycle, which will occur in 60 minutes.
    This event can be caused by TCP/IP connectivity, firewall, Active Directory
    Domain Services, or DNS issues.
    Additional Information:
    Error: 160 (One or more arguments are not correct.)
    Last occurrence: 26 May 2014 18:51:28
    Total occurrence(s): 2
     DNS
    Event ID: 2147487661
    The DNS server is waiting for Active Directory Domain Services (AD DS) to signal that the initial synchronization of the directory has been completed. The DNS server service cannot start until the initial synchronization is complete because critical DNS
    data might not yet be replicated onto this domain controller. If events in the AD DS event log indicate that there is a problem with DNS name resolution, consider adding the IP address of another DNS server for this domain to the DNS server list in the Internet
    Protocol properties of this computer. This event will be logged every two minutes until AD DS has signaled that the initial synchronization has successfully completed.
    Last occurrence: 26 May 2014 18:51:15
    Total occurrence(s): 2
     ADWS
    Event ID: 3221226674
    This computer is now hosting the specified directory instance, but Active Directory Web Services could not service it. Active Directory Web Services will retry this operation periodically.
    Last occurrence: 26 May 2014 18:51:08
    Total occurrence(s): 2
     NTDS General
    Event ID: 2147486534
    The security of this directory server can be significantly enhanced by configuring the server to reject SASL (Negotiate,
    Kerberos, NTLM, or Digest) LDAP binds that do not request signing (integrity verification) and LDAP simple binds that
    are performed on a cleartext (non-SSL/TLS-encrypted) connection.  Even if no clients are using such binds,
    configuring the server to reject them will improve the security of this server.
    Some clients may currently be relying on unsigned SASL binds or LDAP simple binds over a non-SSL/TLS connection,
    and will stop working if this configuration change is made.  To assist in identifying these clients, if such binds occur this
    directory server will log a summary event once every 24 hours indicating how many such binds
    occurred.  You are encouraged to configure those clients to not use such binds.  Once no such events are observed
    for an extended period, it is recommended that you configure the server to reject such binds.
    For more details and information on how to make this configuration change to the server, please see http://go.microsoft.com/fwlink/?LinkID=87923.
    You can enable additional logging to log an event each time a client makes such a bind, including
    information on which client made the bind.  To do so, please raise the setting for the "LDAP Interface Events" event logging category
    to level 2 or higher.
    Last occurrence: 26 May 2014 18:51:00
    Total occurrence(s): 2
    =======

    Hi KerguelanAvon,
    Based on your description, it seems to be hard to narrow down the cause of this issue. Please refer to following operations and monitor the result. It may help us to go further, and then solve this issue.
    1. Please refer to the following article and troubleshoot slow boot.
    New Slow Logon, Slow Boot Troubleshooting Content
    2. On your server 2012 essentials, please start a BPA scan and fix all that it can find, then monitor the result.
    Regarding to those critical Errors in Health Report, please perform
    Dcdiag on the server. Meanwhile, please refer to the following article and troubleshoot network connectivity, firewall setting and AD DS issue.
    DFSR Event 1202 (DFS Replication)
    Hope this helps.
    Best regards,
    Justin Gu
    Hi Justin,
    I'm reading through the links you referred me to but it's taking a while.  In the meantime I tried running BPA as you suggested.  I'm sure when I ran it before, it didn't say much beyond 81 checks completed, and I couldn't find a way to get any
    more detail.
    Now it says
    Problem:
    The DNS client is not configured to point only to the internal IP address of the server.
    Impact:
    If the DNS client is not configured to point only to the internal IP address of the server, DNS name resolution can fail.
    Resolution:
    To resolve this problem:
    1. From the client computer, open the Properties page for the network connection.
    2. Make sure that DNS is configured to point only to the internal IP address of the server.
    Except that it is.
    Connection-specific DNS Suffix:
    Description: Broadcom 802.11n Network Adapter
    Physical Address: ‎00-1B-B1-28-AE-63
    DHCP Enabled: Yes
    IPv4 Address: 192.168.1.133
    IPv4 Subnet Mask: 255.255.255.0
    Lease Obtained: 03 June 2014 21:56:49
    Lease Expires: 05 June 2014 20:24:20
    IPv4 Default Gateway: 192.168.1.1
    IPv4 DHCP Server: 192.168.1.1
    IPv4 DNS Server: 192.168.1.49
    IPv4 WINS Server:
    NetBIOS over Tcpip Enabled: Yes
    Link-local IPv6 Address: fe80::80ef:48d5:9fde:f10e%14
    IPv6 Default Gateway:
    IPv6 DNS Server:
    I'll try rebooting from the current windows 7 build over to windows 8 on my dual boot laptop, to see if that makes any difference, since it is the only other client PC connected to the server at the moment.
    Thanks, Avon.

  • Error when installing reporting Services

    Hello!
    I have a
    monitoring infrastructure
    with the
    Operations Manager
    R2 with
    2012 following scenario:
    Hello!
    I have
    a monitoring infrastructure
    with the
    Operations Manager
    R2 with
    2012 following scenario:
    Trust relationship between
    two domains
    (A, B).
    Management server
    in the domain
    "A"
    database in domain "B"
    When I try to
    install reporting services
    function
    on a separate server
    or on the
    existing
    Management Server,
    the error
    occurs as follows:
    This is
    the installation
    log:
    Application Started
    [10:48:33]: Always: :Machine on which Operations Manager is being installed: SERVER
    [10:48:33]: Always: :Current setup user: DOMAIN\scom
    [10:48:33]: Always: :Current setup version: 7.1.10226.0
    [10:48:34]: Always: :Begin: Parse command line.
    [10:48:34]: Debug: :Collected a path value of: E:\Setup\AMD64\
    [10:48:34]: Always: :Begin: Parse command line.
    [10:48:34]: Always: :End: Parse reporting command line switches.
    [10:48:34]: Always: :End: Parse data reader account command line switches.
    [10:48:34]: Always: :End: Parse command line.
    [10:48:34]: Always: :Begin: System State detection.
    [10:48:34]: Debug: :isProductInstalled: product with {C92727BE-BD12-4140-96A6-276BA4F60AC1} product code is installed on this machine
    [10:48:34]: Debug: :GetServerInstallState: OpsMgr Server is installed on this machine
    [10:48:34]: Debug: :isProductInstalled: product with {041C3416-87CE-4B02-918E-6FDC95F241D3} product code is installed on this machine
    [10:48:34]: Debug: :GetUserInterfaceInstallState: OpsMgr UI is installed on this machine
    [10:48:34]: Debug: :isProductInstalled: product with {B9853D74-E2A7-446C-851D-5B5374671D0B} product code is installed on this machine
    [10:48:34]: Debug: :GetWebConsoleInstallState: OpsMgr Web Console is installed on this machine
    [10:48:34]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMCONSOLE
    [10:48:34]: Info: :Version Installed=7.1.10226.0
    [10:48:34]: Info: :Info:Component OMCONSOLE is installed
    [10:48:34]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMSERVER
    [10:48:34]: Info: :Version Installed=7.1.10226.1009
    [10:48:34]: Info: :Info:Component OMSERVER is installed
    [10:48:34]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMWEBCONSOLE
    [10:48:34]: Info: :Version Installed=7.1.10226.0
    [10:48:34]: Info: :Info:Component OMWEBCONSOLE is installed
    [10:48:34]: Info: :Info:CheckIfOpsMgrComponentsInstalled: component - OMREPORTING
    [10:48:34]: Info: :Info:Component OMREPORTING is not installed
    [10:48:34]: Always: :End: System State detection.
    [10:48:34]: Always: :OM component is installed on this machine and it's interactive run.
    [10:48:34]: Info: :Info:this is ARP run
    [10:48:34]: Always: :We have a path entry and we are not uninstalling so we are setting C:\Program Files\Microsoft System Center 2012 R2\Operations Manager to the value installpath.
    [10:48:34]: Info: :SetInstallPath: installpath has a value of C:\Program Files\Microsoft System Center 2012 R2\Operations Manager
    [10:48:34]: Info: :Info:SetComponentSwitches: component list not specified
    [10:48:34]: Always: :Begin: Rationalize components.
    [10:48:34]: Always: :Begin: Rationalize command line arguments (first run).
    [10:48:34]: Always: :RationalizeCommandLineArguments succeeded.
    [10:48:34]: Always: :End: Rationalize command line arguments (first run).
    [10:48:34]: Always: :Begin: Rationalize ARP scenario.
    [10:48:34]: Always: :Begin: Rationalize final steps.
    [10:48:35]: Info: :Beginning evaluation of rule 'Block Unsupported MOM versions.'
    [10:48:35]: Debug: :Condition wasnt defined for rule 'Block Unsupported MOM versions.'.
    [10:48:35]: Info: :Beginning evaluation of rule 'PreOM12RTMRulesGroup'
    [10:48:35]: Debug: :Condition wasnt defined for rule 'PreOM12RTMRulesGroup'.
    [10:48:35]: Info: :Version Installed=7.1.10226.1009
    [10:48:35]: Info: :Info:MOMSelect is installed: False
    [10:48:35]: Info: :Info:MOMAEM is installed: False
    [10:48:35]: Info: :Info:MOMEval is installed: False
    [10:48:35]: Info: :Info:MOMOEM is installed: False
    [10:48:35]: Info: :Info:MOMAgent is installed: False
    [10:48:35]: Info: :Info:MOMGW is installed: False
    [10:48:35]: Info: :Info:MOMReporting is installed: False
    [10:48:35]: Info: :Finished evaluation of rule 'PreOM12RTMRulesGroup'
    [10:48:35]: Info: :Beginning evaluation of rule 'BlockPre2012SP1'
    [10:48:35]: Debug: :Condition wasnt defined for rule 'BlockPre2012SP1'.
    [10:48:35]: Info: :Version Installed=7.1.10226.1009
    [10:48:35]: Info: :Info:OMServer is installed: False
    [10:48:35]: Info: :Version Installed=7.1.10226.0
    [10:48:35]: Info: :Info:OMConsole is installed: False
    [10:48:35]: Info: :Version Installed=7.1.10226.0
    [10:48:35]: Info: :Info:OMReporting is installed: False
    [10:48:35]: Info: :Info:OMWebConsole is installed: False
    [10:48:35]: Info: :Finished evaluation of rule 'BlockPre2012SP1'
    [10:48:35]: Info: :Finished evaluation of rule 'Block Unsupported MOM versions.'
    [10:48:35]: Info: :Beginning evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [10:48:35]: Debug: :Condition wasnt defined for rule 'Check that Unsupported SKU does not exist for SCOM setup.'.
    [10:48:35]: Info: :Info:MOMAEM is installed: False
    [10:48:35]: Info: :Info:MOMEval is installed: False
    [10:48:35]: Info: :Finished evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [10:48:35]: Always: :End: Rationalize final steps.
    [10:48:35]: Always: :End: Rationalize components.
    [10:48:35]: Debug: :isProductInstalled: product with {C92727BE-BD12-4140-96A6-276BA4F60AC1} product code is installed on this machine
    [10:48:35]: Debug: :GetServerInstallState: OpsMgr Server is installed on this machine
    [10:48:35]: Debug: :isProductInstalled: product with {041C3416-87CE-4B02-918E-6FDC95F241D3} product code is installed on this machine
    [10:48:35]: Debug: :GetUserInterfaceInstallState: OpsMgr UI is installed on this machine
    [10:48:35]: Debug: :isProductInstalled: product with {B9853D74-E2A7-446C-851D-5B5374671D0B} product code is installed on this machine
    [10:48:35]: Debug: :GetWebConsoleInstallState: OpsMgr Web Console is installed on this machine
    [10:48:35]: Always: :IsValidToInstall: Web Console found already installed; cannot install Server Component.
    [10:48:35]: Error: :Error:IsReportingValidToInstall failed SRS instance not provided
    [10:48:35]: Info: :Start adding DataItems
    [10:48:35]: Info: :Initial Configuration
    [10:48:35]: Info: :Database Configuration
    [10:48:35]: Info: :Data Warehouse Configuration
    [10:48:35]: Info: :Management Server
    [10:48:35]: Info: :Operations console
    [10:48:35]: Info: :Web Console Server
    [10:48:35]: Info: :Reporting Server
    [10:48:35]: Info: :Final Configuration
    [10:48:35]: Info: :Done adding DataItems
    [10:48:35]: Info: :Adding Page StartPageTrack
    [10:48:35]: Info: :Adding Page UpgradeInvalidStartPage
    [10:48:35]: Info: :Adding Page UpgradeInvalidRootPage
    [10:48:35]: Info: :Adding Page ARPStartPageSwitch
    [10:48:35]: Info: :Adding Page ARPAddRemovePage
    [10:48:35]: Info: :Adding Page UpgradePageSwitch
    [10:48:35]: Info: :Adding Page UpgradePage
    [10:48:35]: Info: :Adding Page UpgradeManagementGroupPageSwitch
    [10:48:35]: Info: :Adding Page UpgradeManagementGroupPage
    [10:48:35]: Info: :Adding Page UpgradeEulaPage
    [10:48:36]: Info: :Adding Page RegularStartPageSwitch
    [10:48:36]: Info: :Adding Page ComponentsPageCleanInstall
    [10:48:36]: Info: :Adding Page ComponentsPage
    [10:48:36]: Info: :Adding Page InstallationLocationPage
    [10:48:36]: Info: :Adding Page PrerequisitesProgressPage
    [10:48:36]: Info: :Adding Page AdditionalPrerequisitesPage
    [10:48:36]: Info: :Adding Page InstallScenario
    [10:48:36]: Info: :Adding Page ShortEulaPage
    [10:48:36]: Info: :Adding Page SecondServerOperationalDb
    [10:48:36]: Info: :Adding Page EulaPageCleanInstall
    [10:48:36]: Info: :Adding Page FirstServerOperationalDb
    [10:48:36]: Info: :Adding Page DbPageDataWarehouse
    [10:48:36]: Info: :Adding Page SelectManagementServerForReporting
    [10:48:36]: Info: :Adding Page SelectReportingInstance
    [10:48:36]: Info: :Adding Page SelectManagementServerForWebConsole
    [10:48:36]: Info: :Adding Page WebConsoleSitePage
    [10:48:37]: Info: :Adding Page WebConsoleAuthorizationMode
    [10:48:37]: Info: :Adding Page AccountsInformationPage
    [10:48:37]: Info: :Adding Page ImproveUserExperiencePage
    [10:48:37]: Info: :Adding Page MSFTUpdatePage
    [10:48:37]: Info: :Adding Page ConfigurationSummaryPage
    [10:48:37]: Info: :Adding Page ProgressPage
    [10:48:37]: Info: :Adding Page BlockPage
    [10:48:37]: Info: :Adding Page FinishPage
    [10:48:37]: Info: :Beginning evaluation of rule 'Block Unsupported MOM versions.'
    [10:48:37]: Debug: :Condition wasnt defined for rule 'Block Unsupported MOM versions.'.
    [10:48:37]: Info: :Beginning evaluation of rule 'PreOM12RTMRulesGroup'
    [10:48:37]: Debug: :Condition wasnt defined for rule 'PreOM12RTMRulesGroup'.
    [10:48:37]: Info: :Version Installed=7.1.10226.1009
    [10:48:37]: Info: :Info:MOMSelect is installed: False
    [10:48:37]: Info: :Info:MOMAEM is installed: False
    [10:48:37]: Info: :Info:MOMEval is installed: False
    [10:48:37]: Info: :Info:MOMOEM is installed: False
    [10:48:37]: Info: :Info:MOMAgent is installed: False
    [10:48:37]: Info: :Info:MOMGW is installed: False
    [10:48:37]: Info: :Info:MOMReporting is installed: False
    [10:48:37]: Info: :Finished evaluation of rule 'PreOM12RTMRulesGroup'
    [10:48:37]: Info: :Beginning evaluation of rule 'BlockPre2012SP1'
    [10:48:37]: Debug: :Condition wasnt defined for rule 'BlockPre2012SP1'.
    [10:48:37]: Info: :Version Installed=7.1.10226.1009
    [10:48:37]: Info: :Info:OMServer is installed: False
    [10:48:37]: Info: :Version Installed=7.1.10226.0
    [10:48:37]: Info: :Info:OMConsole is installed: False
    [10:48:37]: Info: :Version Installed=7.1.10226.0
    [10:48:37]: Info: :Info:OMReporting is installed: False
    [10:48:37]: Info: :Info:OMWebConsole is installed: False
    [10:48:37]: Info: :Finished evaluation of rule 'BlockPre2012SP1'
    [10:48:37]: Info: :Finished evaluation of rule 'Block Unsupported MOM versions.'
    [10:48:37]: Info: :Beginning evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [10:48:37]: Debug: :Condition wasnt defined for rule 'Check that Unsupported SKU does not exist for SCOM setup.'.
    [10:48:37]: Info: :Info:MOMAEM is installed: False
    [10:48:37]: Info: :Info:MOMEval is installed: False
    [10:48:37]: Info: :Finished evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [10:48:37]: Debug: :OMForwardToStartPageTrackPageHandler: Moving to page ARPStartPageSwitch
    [10:48:37]: Always: :Entering Page: ARPAddRemovePage
    [10:48:40]: Always: :Begin: Rationalize components.
    [10:48:40]: Always: :Begin: Rationalize command line arguments (first run).
    [10:48:40]: Always: :RationalizeCommandLineArguments succeeded.
    [10:48:40]: Always: :End: Rationalize command line arguments (first run).
    [10:48:40]: Always: :Begin: Rationalize ARP scenario.
    [10:48:40]: Always: :Begin: Rationalize final steps.
    [10:48:40]: Info: :Beginning evaluation of rule 'Block Unsupported MOM versions.'
    [10:48:40]: Debug: :Condition wasnt defined for rule 'Block Unsupported MOM versions.'.
    [10:48:40]: Info: :Beginning evaluation of rule 'PreOM12RTMRulesGroup'
    [10:48:40]: Debug: :Condition wasnt defined for rule 'PreOM12RTMRulesGroup'.
    [10:48:40]: Info: :Version Installed=7.1.10226.1009
    [10:48:40]: Info: :Info:MOMSelect is installed: False
    [10:48:40]: Info: :Info:MOMAEM is installed: False
    [10:48:40]: Info: :Info:MOMEval is installed: False
    [10:48:40]: Info: :Info:MOMOEM is installed: False
    [10:48:40]: Info: :Info:MOMAgent is installed: False
    [10:48:40]: Info: :Info:MOMGW is installed: False
    [10:48:40]: Info: :Info:MOMReporting is installed: False
    [10:48:40]: Info: :Finished evaluation of rule 'PreOM12RTMRulesGroup'
    [10:48:40]: Info: :Beginning evaluation of rule 'BlockPre2012SP1'
    [10:48:40]: Debug: :Condition wasnt defined for rule 'BlockPre2012SP1'.
    [10:48:40]: Info: :Version Installed=7.1.10226.1009
    [10:48:40]: Info: :Info:OMServer is installed: False
    [10:48:40]: Info: :Version Installed=7.1.10226.0
    [10:48:40]: Info: :Info:OMConsole is installed: False
    [10:48:40]: Info: :Version Installed=7.1.10226.0
    [10:48:40]: Info: :Info:OMReporting is installed: False
    [10:48:40]: Info: :Info:OMWebConsole is installed: False
    [10:48:40]: Info: :Finished evaluation of rule 'BlockPre2012SP1'
    [10:48:40]: Info: :Finished evaluation of rule 'Block Unsupported MOM versions.'
    [10:48:40]: Info: :Beginning evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [10:48:40]: Debug: :Condition wasnt defined for rule 'Check that Unsupported SKU does not exist for SCOM setup.'.
    [10:48:40]: Info: :Info:MOMAEM is installed: False
    [10:48:40]: Info: :Info:MOMEval is installed: False
    [10:48:40]: Info: :Finished evaluation of rule 'Check that Unsupported SKU does not exist for SCOM setup.'
    [10:48:40]: Always: :End: Rationalize final steps.
    [10:48:40]: Always: :End: Rationalize components.
    [10:48:40]: Debug: :CustomDelegates: ForwardToPageBasedOnPropertyValueHandler: Property bag entry for ARPRun is 2.  This means that we will move to a next page id ComponentsPage.
    [10:48:40]: Always: :Entering Page: ComponentsPage
    [10:48:40]: Debug: :isProductInstalled: product with {C92727BE-BD12-4140-96A6-276BA4F60AC1} product code is installed on this machine
    [10:48:40]: Debug: :GetServerInstallState: OpsMgr Server is installed on this machine
    [10:48:40]: Debug: :isProductInstalled: product with {041C3416-87CE-4B02-918E-6FDC95F241D3} product code is installed on this machine
    [10:48:40]: Debug: :GetUserInterfaceInstallState: OpsMgr UI is installed on this machine
    [10:48:40]: Debug: :isProductInstalled: product with {B9853D74-E2A7-446C-851D-5B5374671D0B} product code is installed on this machine
    [10:48:40]: Debug: :GetWebConsoleInstallState: OpsMgr Web Console is installed on this machine
    [10:48:40]: Info: :Server Installed:True  InstallingNow:False
    [10:48:41]: Debug: :isProductInstalled: product with {C92727BE-BD12-4140-96A6-276BA4F60AC1} product code is installed on this machine
    [10:48:41]: Debug: :GetServerInstallState: OpsMgr Server is installed on this machine
    [10:48:41]: Debug: :isProductInstalled: product with {041C3416-87CE-4B02-918E-6FDC95F241D3} product code is installed on this machine
    [10:48:41]: Debug: :GetUserInterfaceInstallState: OpsMgr UI is installed on this machine
    [10:48:41]: Debug: :isProductInstalled: product with {B9853D74-E2A7-446C-851D-5B5374671D0B} product code is installed on this machine
    [10:48:41]: Debug: :GetWebConsoleInstallState: OpsMgr Web Console is installed on this machine
    [10:48:41]: Info: :Server Installed:True  InstallingNow:False
    [10:48:42]: Debug: :isProductInstalled: product with {C92727BE-BD12-4140-96A6-276BA4F60AC1} product code is installed on this machine
    [10:48:42]: Debug: :GetServerInstallState: OpsMgr Server is installed on this machine
    [10:48:42]: Debug: :isProductInstalled: product with {041C3416-87CE-4B02-918E-6FDC95F241D3} product code is installed on this machine
    [10:48:42]: Debug: :GetUserInterfaceInstallState: OpsMgr UI is installed on this machine
    [10:48:42]: Debug: :isProductInstalled: product with {B9853D74-E2A7-446C-851D-5B5374671D0B} product code is installed on this machine
    [10:48:42]: Debug: :GetWebConsoleInstallState: OpsMgr Web Console is installed on this machine
    [10:48:42]: Info: :Server Installed:True  InstallingNow:False
    [10:48:42]: Always: :Entering Page: PrerequisitesProgressPage
    [10:48:43]: Debug: :LoadPrerequisites: Start adding ComponentTitles
    [10:48:43]: Always: :LoadPrerequisites: Start adding DataItems
    [10:48:43]: Always: :memoryCheckTitle
    [10:48:43]: Always: :memoryCheckTitle
    [10:48:43]: Always: :ntfsCheckTitle
    [10:48:43]: Always: :DriveSpaceCheckTitle
    [10:48:43]: Always: :DriveSpaceCheckTitle
    [10:48:43]: Always: :OSVersionCheckTitle
    [10:48:43]: Always: :OSVersionCheckTitle
    [10:48:43]: Always: :PowershellCheckTitle
    [10:48:43]: Always: :DomainControllerCheckTitle
    [10:48:43]: Always: :WindowsInstallerCheckTitle
    [10:48:43]: Always: :PendingRebootCheckTitle
    [10:48:43]: Always: :WinRMCheckTitle
    [10:48:43]: Always: :RemoteRegistryCheckTitle
    [10:48:43]: Always: :ReportViewerCheckTitle
    [10:48:43]: Always: :ClusteredServerCheckTitle
    [10:48:43]: Always: :ActiveDirectoryCheckTitle
    [10:48:43]: Always: :IsComputerNameValidTitle
    [10:48:43]: Always: :SEViewerInstalledCheck
    [10:48:43]: Always: :AVIcodeAgentCheck
    [10:48:43]: Always: :MOMASPAgentInstalledCheck
    [10:48:43]: Always: :IISCheckTitle
    [10:48:43]: Always: :IISMetabaseCheckTitle
    [10:48:43]: Always: :AspNetCheckTitle
    [10:48:43]: Always: :WindowsAuthRoleCheckTitle
    [10:48:43]: Always: :StaticContentRoleCheckTitle
    [10:48:43]: Always: :DefaultDocumentRoleCheckTitle
    [10:48:43]: Always: :DirectoryBrowsingRoleCheckTitle
    [10:48:43]: Always: :HttpErrorsRoleCheckTitle
    [10:48:43]: Always: :HttpLoggingRoleCheckTitle
    [10:48:43]: Always: :RequestMonitorRoleCheckTitle
    [10:48:43]: Always: :RequestFilterRoleCheckTitle
    [10:48:43]: Always: :StaticContentCheckTitle
    [10:48:43]: Always: :IISConsoleCheckTitle
    [10:48:43]: Always: :IsapiAllowedCheckTitle
    [10:48:43]: Always: :IsAspNetIntegratedHandlerInstalledTitle
    [10:48:43]: Always: :HttpActivationCheckTitle
    [10:48:43]: Always: :HttpActivationCheckTitle
    [10:48:43]: Always: :LoadPrerequisites: Done adding prerequisites checks
    [10:48:43]: Info: :Approximated Memory = 8192
    [10:48:43]: Info: :Approximated Memory = 8192
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and MemoryCheck-1gbFail: 0CheckPrerequisites:   Logic Type:and MemoryCheck-2gbWarn: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  memoryCheckTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and NTFSDrive-Fail: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  ntfsCheckTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and DriveSpaceCheck-Fail: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  DriveSpaceCheckTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[CheckPrerequisites:     ProductType was not a match.  Looking for: LanmanNT Found: ServerNTCheckPrerequisites:   Logic Type:or OSVersion-w2k8R2-Fail: 2CheckPrerequisites:   Logic
    Type:or OSVersion-w2k8R2-Fail: 0CheckPrerequisites:   Logic Type:and ArchitectureIs64Check-Fail: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  OSVersionCheckTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[Successfully parsed version numbers.  Required: 3.1  Actual: 5.0CheckPrerequisites:   Logic Type:and WindowsInstallerVersionCheckDelegate-v31: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  WindowsInstallerCheckTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Error: :<![CDATA[CheckPrerequisites:   Logic Type:and PendingReboot-Fail: 1]]>
    [10:48:43]: Error: :
    [10:48:43]: Error: :CheckPrerequisites:  PendingRebootCheckTitle: Warning
    [10:48:43]: Error: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and ADCheck-Fail: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  ActiveDirectoryCheckTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[IsComputerNameValid: Hostname: SERVER  Len: 6CheckPrerequisites:   Logic Type:and IsComputerNameValid: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  IsComputerNameValidTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and AvicodeAgentInstalled-x86: 0CheckPrerequisites:   Logic Type:and AvicodeAgentInstalled-x64: 0]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  AVIcodeAgentCheck: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :IsServiceInstalled: RemoteRegistry?  True.
    [10:48:43]: Debug: :ServiceControlFunctions.IsEnabledAndRunning(): Starting...
    [10:48:43]: Debug: :IsServiceInstalled: RemoteRegistry?  True.
    [10:48:43]: Debug: :ServiceControlFunctions.IsEnabledAndRunning(): Checking second time because first time result was False.
    [10:48:43]: Debug: :IsServiceInstalled: RemoteRegistry?  True.
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Debug: :<![CDATA[CheckPrerequisites:   Logic Type:and PassIfWin8Anything: 0CheckPrerequisites:   Logic Type:and ServiceCheck-WinRM-enabled: 0CheckPrerequisites:   Logic Type:or ServiceCheck-WinRM-running:
    2]]>
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :CheckPrerequisites:  RemoteRegistryCheckTitle: Passed
    [10:48:43]: Debug: :
    [10:48:43]: Debug: :**************************************************
    [10:48:43]: Always: :CheckPrerequisites: Return Value 1
    [10:48:43]: Always: :Entering Page: AdditionalPrerequisitesPage
    [10:48:43]: Info: :Info:Attempting to get the text for the prereq: PendingRebootCheckTitle
    [10:48:45]: Debug: :isProductInstalled: product with {C92727BE-BD12-4140-96A6-276BA4F60AC1} product code is installed on this machine
    [10:48:45]: Debug: :GetServerInstallState: OpsMgr Server is installed on this machine
    [10:48:45]: Debug: :isProductInstalled: product with {041C3416-87CE-4B02-918E-6FDC95F241D3} product code is installed on this machine
    [10:48:45]: Debug: :GetUserInterfaceInstallState: OpsMgr UI is installed on this machine
    [10:48:45]: Debug: :isProductInstalled: product with {B9853D74-E2A7-446C-851D-5B5374671D0B} product code is installed on this machine
    [10:48:45]: Debug: :GetWebConsoleInstallState: OpsMgr Web Console is installed on this machine
    [10:48:45]: Always: :Entering Page: SelectReportingInstance
    [10:48:45]: Always: :SQL Server SRS Instance (escaped name) RS_MSSQLSERVER
    [10:48:45]: Info: :Attempting to get the SSRS version from:
    \\SERVER\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
    [10:48:45]: Debug: :Path is
    \\SERVER\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER\V11:MSReportServer_Instance
    [10:48:45]: Always: :SRS instance on SERVER. Version 11.0.3000.0.
    [10:48:45]: Always: :No SRS instances on SERVER.
    [10:48:45]: Info: :Info: SERVER SRS version = 11.1.3000.0
    [10:48:45]: Info: :Attempting to check SRS version
    [10:48:45]: Info: :Info: SERVER SRS version = 11.1.3000.0
    [10:48:45]: Info: :Attempting to check SRS version
    [10:48:45]: Info: :Info: SERVER SRS version = 11.1.3000.0
    [10:48:46]: Debug: :GetSRSProperties: SRS Server is: SERVER.
    [10:48:46]: Always: :GetSRSProperties: SRS Instance is: MSSQLSERVER
    [10:48:46]: Debug: :GetSRSProperties:  Actual SRS reg location is: SOFTWARE\Microsoft\Microsoft SQL Server\MSRS11.MSSQLSERVER\Setup
    [10:48:46]: Info: :Attempting to get the SSRS version from:
    \\SERVER\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
    [10:48:47]: Debug: :GetSRSProperties: SRS DatabaseServerName is SERVER.
    [10:48:47]: Debug: :GetSRSProperties: SRS InstanceName is MSSQLSERVER.
    [10:48:47]: Debug: :GetSRSProperties: SRS DatabaseName is ReportServer.
    [10:48:47]: Debug: :GetSRSProperties: SRS Report Server folder is C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\.
    [10:48:47]: Debug: :GetSRSProperties: SRS Config File is C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rssrvpolicy.config.
    [10:48:47]: Debug: :GetSRSProperties: SRS binary folder is C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\bin.
    [10:48:47]: Info: :Attempting to get the SSRS version from:
    \\SERVER\Root\Microsoft\SqlServer\ReportServer\RS_MSSQLSERVER:__NAMESPACE
    [10:48:47]: Info: :Info:Found url for given RS instance:SERVER. RS
    URL:https://SERVER.DOMAIN.com.br:443/ReportServer
    [10:48:47]: Debug: :GetSRSProperties: ReportServer Url is
    https://SERVER.DOMAIN.com.br:443/ReportServer.
    [10:48:47]: Always: :Reporting URL:
    https://SERVER.DOMAIN.com.br:443/ReportServer
    [10:48:47]: Info: :Attempting to connect to above URL
    [10:49:12]: Always: :Create dummy schedule
    [10:49:19]: Always: :Delete dummy schedule
    [10:49:20]: Always: :Entering Page: AccountsInformationPage
    [10:49:42]: Info: :Info:AccountsInformationPage: In OnNextFinalValidationsDoWork to validate account access.
    [10:50:03]: Error: :Error:Could not validate the specified account because the SQL Server Instance was null.
    [10:50:03]: Info: :Standalone Reporting needs to validate the Data Reader account against the Management Group for clean install.
    [10:50:03]: Error: :Error:GetUserNameGivenAccount: Account Name was not specified
    [10:50:03]: Error: :Failed to check if Data Reader account is same as that in the management group: Threw Exception.Type: System.ArgumentNullException, Exception Error Code: 0x80004003, Exception.Message: Value cannot be null.
    Parameter name: account.accountUserName
    [10:50:03]: Error: :StackTrace:   at Microsoft.EnterpriseManagement.OperationsManager.SetupCommon.SetupUtils.GetUserNameGivenAccount(Account account, String& userName)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.ReportingComponent.IsDataReaderAccountSameInManagementGroup(Account dataReaderAccount, String managementServerName)
    [10:50:03]: Info: :Info:AccountsInformationPage: Async account validation thread returned to UI thread.

    The user running setup is not in sysadmin role in the reporting database. This one took a little bit longer to tackle. The SDK account (the
    Data Reader and Data Writer account as well) did have sysadmin permissions on that database
    (ReportServer).
    Verify that user who used in setup has sysadmin role
    Also checked the Data Warehouse database (hosted on the same server) and the same permissions were in place there as well. A last check was performed on
    Security > Server Roles > sysadmin.
    Also you can refer below link
    http://thoughtsonopsmgr.blogspot.com/2011/08/scom-r2-reporting-installation-keeps-on.html
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

  • Crystal Reports 2008 Server Error when viewing report

    Hello All,
       I have loaded a CR 2008 report onto the CR 2008 Server. When I view the report from InfoView or CMC, I get the following error message:
    Error in File <report name>: Unknown Database Connector Error .
    I setup the ODBC datasources on the server as they are on my client PC where the Report originally worked. Are the ODBC datasource connections supposed to copy over with the report? Or do I have to manually enter them into the "Database Configuration" section?
    Thank you in advance.

    1212487 - Error: "CRAXDRT Error Occured on Server. Error Number:-2147221005"
    Symptom
    A report is called through the Active Server Pages (ASP) Report Server to be displayed in the Report Viewer for ActiveX. However, the report is displayed with blank pages and when the viewer is switched to the Report Viewer for HTML the following error is displayed:
    "CRAXDRT Error Occurred on Server. Error Number:-2147221005 Error Description: 006ASP 0177 Server.CreateObject Failed~Invalid Class String"
    The same ASP application returns the report correctly when it is called from a client computer with the full version of Crystal Report 8 Developer Edition installed.
    Resolution
    It was found that the file, Emfgen.dll, was not installed and registered on the web server computer during the installation of the Crystal Reports ASP Reports Server. The report could be displayed correctly on the client computer, without Crystal Reports Developer Edition installed, after this file had been installed on the web server computer.
    For more information on installing the Crystal Reports web components please search for and download Scr8_WebManualInstall.zip from our website at:

  • Error in File (report server\ report.rpt):  Database Connector Error

    New installation of XI R2 - using Crystal Reports Version 11.5.8.826 for developement against Oracle DB.
    Currently have around 20 reports running on XI (need to import ~1500 reports from Crystal Enterprise 10, but waiting to resolve this issue)
    Some reports sometimes (not always) get the following error:
    Error in File (report server\ report.rpt):  Database Connector Error
    If the report is re-scheduled, report will sometime run fine and sometimes gets the same error again.
    There seems to be no logical way to determine which parameters will cause the report to fail or when.
    I'm experiencing the problem on about 3 reports only - All against the same DB and only occassionally.  These 20 reports were developed with CR XI and all run against the same Oracle DB.

    I've got the same problem- the reports run fine in Crystal, but sometimes (not everytime) they fail in InfoView with "Database Connector Error" message. My report doesn't contain any data, just 8 sets of 4 subreports in different footer sections, which each connect to a different stored procedure. The report is to help with our server checks: we have a set of 4 different stored procedures which run on each of 8 different servers making 32 different SPs and there is a subreport in this report for each.
    It does seem to be random whether this problem occurs or not- I have scheduled the report to run regularly (1 recurring instance) and sometime it works, sometimes not, but always the same failure message. I have increased the success rate by allowing the report to re-try on failure, but this does take time, and isn't really curing the problem.
    I wonder whether this error could be caused by a delay in one of the SPs returning its data, and the report timing out since no data is being returned. Would anyone know whether this is likely to be the cause, and if so how to fix it? Or any suggestions what else it could be?
    Thanks,
    Tom

  • Error 1935. An error occurred during the installation of assembly...

    I utilizing VS.Net and I'm deploying a project to my client machines. The XP client machines execute the code just fine but I get two general errors when I try to run the app on a Vista Business machine.
    1) Crystal Reports Basic Runtime for Visual Studio 2008
    Error 1935. An error occurred during the installation of assembly.
    'Microsoft.VC90.ATL.version="9.0.21009.1.publicKey="1fc8b9a1e18e3b:.processorArchitecture="x86".type="win32'"
    Please refer to Help and Support for more information.
    2) The other error happens when I actually run the app and its in InnerException error.
    Things that I found on the web discuss adding merge modules to VS but I can't find where to reference that info. Are there any other ideas out there.
    Thanks-
    JLN

    Hello,
    Good Day!
    I'm having a nasty problem that remains unresolved for the last four weeks now - I'm trying to install CR2008 on a brand new Dell laptop /w 64-bit OS  Windows 7 with a T4300 dual core processor (2.1Gz).  As far as I can see SP1 or SP2 are not installed. However, I see MS WSE 2.0 SP3 Runtime installed.
    During installation of CR 2008  the error message as follows shows up -
    Error 1935: An error occured during the installation of assembly component {303994BA-6487-47AE-AF1D-7AF6088EEBDB}
    HRESULT: 0X80070002
    As a result of this error the installation terminates and the rollback begins (I assume it completely removes the components that it attempted to install so far.
    The laptop has the following significant software applications -
    Microsoft SQL server 2005, SQL server Native Client, MS VisualBasic 2005 & 2008, C++, MS Visual Studio 2005 Remote Debugger &  Windows SDK for Visual Studio 2008  - just in case there are any known conflicts or problems.
    Are there any 'leads' I can follow to successfully conclude this installation.
    Thanks for your time.
    TGupta

  • Error Installing FIM Reporting in FIM 2010 R2 with SP1 - SCSM 2012 [CheckFIMWebSiteorSolutionPackExisting]

    I am running into the below issue. I am installing FIM 2010 R2 SP1 Reporting with SCSM 2012 [SCSM successfully installed].
    FIM R2 Reporting installation is failing with both Wizard and Command line.
    Command line captures below error: Can some one help on this?
    Calling custom action Microsoft.IdentityManagement.SharePointCustomActions!Microsoft.IdentityManagement.ManagedCustomActions.SharepointCustomActions.DoesWebsiteOrSolutionPackExist
    Property name = 'SHAREPOINT_URL', value = 'http://myurl.
    Property name = 'UILevel', value = '2'.
    CustomAction CheckFIMWebSiteorSolutionPackExisting returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    Action ended 0:27:20: CheckFIMWebSiteorSolutionPackExisting. Return value 3.
    Action ended 0:27:20: INSTALL. Return value 3.
    In below link, the above question is unanswered. Kindly help.
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/37b1af85-aef0-422b-9417-7364d51d0df4/installing-fim-reporting-in-fim-2010-r2-with-sp1?forum=systemcenterservicemanager

    Hi All,
    Though we use SCSM 2012, the FIM 2010 Reporting (R2 SP1) installation throws the alert to run
    KB2561430 hotfix (when run throght console) and above error (when run through commnad line).This is actually a bug and MS have fixed that in one of its FIM hotfix rollup. I could move out of the above error by applying the FIM hotfix mentioned
    in the below link.
    http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
    Aswathy Raj

  • Erro.1935. An error occured during the installation of assembly component

    Dear All,
    I have a problem with installation of Crystal report server 2008 v1.
    During installation, I received a message: Erro.1935. An error occured during the installation of assembly component  {66332652-9c28-58b1-a01f-c8b3b9a1e18e}.hresult:0x800736fd.
    What does it mean? How can I solve this problem?
    Best Regards

    Make sure .NET framework is installed. See [this|http://support.microsoft.com/kb/926804] MS KB for more details.
    - Ludek

  • Error 1935: An error occured during the installation of assembly component

    I am attempting to install SAP Crystal Reports for Visual Studio 2012.
    The installation (which was initialized with elevated permissions) fails near completion, with the following error message:
    Error 1935. An error occurred during the installation of assembly component {844EFBA7-1C24-93B2-A01F-C8B3B9A1E18E}. HRESULT: 0x80073715.
    OS: Windows 8.1 64 bit
    Visual Studio: VS 2012 Ultimate
    .NET Framework: 4.5 with 3.5, 3.0, 2.5, 2.0 all enabled
    SAP version: 64 bit 13_0_7
    If anyone has had a similar issue and can help, or if there is an official fix from Microsoft out there that someone can point me to, I'd greatly appreciate it.
    -Amanda

    Hi,
    About error 0x80073715, I found the acticle. Wish it will help you.
    http://support.microsoft.com/kb/2643995/en-us
    If it can't solve your issue, I suggest you post your issue to the related forum.
    http://scn.sap.com/thread/3185805
    Best Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

Maybe you are looking for

  • Windows 7 to Networked LaserJet 2300 (running XP)

    I purhased a new laptop running Windows 7.  I have an HP LaserJet 2300 running on another computer with Windows XP as the operating system using a USB connection.  In addition, there is another laptop running Vista and another desktop running XP.  Al

  • New Mini and old wireless keyboard must be 1" apart?

    I just bought a brand new Mac Mini to replace older model of same. My old Apple wireless keyboard (probably 1st gen - the battery compartment is on the bottom) was working fine with old Mini, but with the new one, the keyboard loses connection unless

  • Adobe won't help fix problem caused by them

    I bought the software license of photoshop elements 13 and premiere elements 13 and needed help to install them which I received from Adobe.  However they won't open without an internet connection which is incorrect.  I live chatted this afternoon wi

  • XI in a SOA landscape  - licensing

    We are in the process of formulating a SOA strategy. We want our webservices platform to be on .NET and since SAP doesn't have webservices management tool we are also evaluating Amberpoint/Actional. SAP has not clearly spelt out how licensing will wo

  • 2k classpath limitation workaround not working

    Hello I am aware of the 2k limitation in installing weblogic as win2k service. The suggested workaround for that as per the documentation is to provide a '@filename' paramater. But looks like it is not picking up the ''myclasspath.txt' This file is i