Error in XPRA_EXECUTION phase while upgrading patch in solman 7.0.

Hi all,
I was upgrading solman system( 7.0 ) from patch level 10 to patch level 13 , while upgrading it throwed error in XPRA_EXECUTION phase. Error is in SAPK-40003INCPRXRPM and SAPK-40004INCPRXRPM.
Error log is as given below :
Post-import method SWO_OBJTYPE_AFTER_IMPORT started for SOBJ L, date and time: 20090415070141
Object type 'BUS2178' generated successfully
Object type 'BUS2177' generated successfully
Object type 'BUS2176' generated successfully
Object type 'BUS2175' could not be generated
The type 'DPR_SCHEDULING' is unknown.
Object type 'BUS2174' could not be generated
The type 'DPR_SCHEDULING' is unknown.
Object type 'BUS2173' could not be generated
The type 'DPR_SCHEDULING' is unknown.
Object type 'BUS2172' could not be generated
Please help me out as i am stuck.

HI,
Did u check is there any dependencies of Solman support packages with other support pakckages.
Object type 'BUS2174' could not be generated it seems there is a issues with dependencies only.
Please check the stack guide once then u will come to know all the dependencies.
-Srini

Similar Messages

Error in XPRA_EXECUTION phase in instalation BI_CONT 3.53

Hello,
After installing SAP Netweaver 04 as ABAP i am Installing Add-on
BI_CONT Rel.353 : Import of the queue -
via SAINT Tcode.
Now it is in error in XPRA_EXECUTION Phase of pkg
SAPKIBIFQ4 BI_CONT 353: patch 0014.
Error is in Method Execution step:
InfoObject 0GRC_CSEOWR, version D being deleted, (basic char. not
found)
Start of the after-import method for object type R3TR DTMP ( )
Errors occurred during post-handling RS_AFTER_IMPORT_D for DUPD L
RS_AFTER_IMPORT_D belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT_D completed for DUPD L, date and
time: 20080103122305
Pls help me ASAP to resolve this error.
Regards,
Ankita

Hi,
I solved this problem after implementing
Note 1083886 - Method IF_FDT_EXPRESSION~IS_GENERATING is not implemented.
is thsi dosent work try restarting the queue again.
Kind regards,
Vamsi

Error in IS_INIT phase while applying EHP4

Hi,
We are getting following error in IS_INIT phase while applying EHP4.
SEVERE ERROR: Internal error (no compinfo for PI).
              (Function: R3upAddonTableInitialize)
when i click on continue, it's giving foll. error
Severe error(s) occured in phase PREP_EXTENSION/IS_INIT!
Last error code set: Component 'PI' not found
I have checked in SAINT but i m not able to find PI component but still it's looking for PI comp. info while upgrading
Please guide us.
Thanks,
Bhupendra Patel

Here is the log :
1 ETQ201 Entering upgrade-phase "IS_INIT" ("20090718111248")
2 ETQ367 Connect variables are set for standard instance access
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Environment variables:
4 ETQ399   dbs_ora_schema=SAPTPP
4 ETQ399   auth_shadow_upgrade=0
4 ETQ380 computing toolpath for request "TP_DEFAULT"
4 ETQ382 translates to group "R3UP_TOOL_GROUP_OLD"
4 ETQ383 translates to path "/usr/sap/TRN/SYS/exe/run"
4 ETQ383 translates to path "exe"
4 ETQ399 Set environment for standard connect:
4 ETQ399 ENV: dbs_ora_schema=SAPTPP
4 ETQ399 ENV: auth_shadow_upgrade=0
4 ETQ399 Set RFC variables for standard connect:
4 ETQ399 System-nr = '00', GwService = 'sapgw00'
4 ETQ399 Set tool parameters for standard connect:
4 ETQ399   default TPPARAM: DEFAULT.TPP
1 ETQ206 Executing pre-phase DB specific actions.
1 ETQ206 Executing pre-phase OS specific actions.
1 ETQ200 Executing actual phase 'PREP_EXTENSION/IS_INIT'.
1 ETQ399 Phase arguments:
2 ETQ399 Arg[0] = 'ADDONINIT.DMP'
4 ETQ230 Starting RFC Login to: System = "TRN", GwHost = "tpltt", GwService = "sapgw00"
4 ETQ359 RFC Login to: System="TRN", Nr="00", GwHost="tpltt", GwService="sapgw00"
4 ETQ232 RFC Login succeeded
4 ETQ233 Calling function module "SPDA_GET_UPGRADEABLE_ADDONS" by RFC
2 ETQ399 Input table IT_ALL_ADDONS:
3 ETQ399 "DMIS","2006_1_700","","","","","","","","","",""
3 ETQ399 "EA-APPL","603","","","","","","","","","",""
3 ETQ399 "EA-DFPS","600","","","","","","","","","",""
3 ETQ399 "EA-FINSERV","600","","","","","","","","","",""
3 ETQ399 "EA-GLTRADE","600","","","","","","","","","",""
3 ETQ399 "EA-HR","600","","","","","","","","","",""
3 ETQ399 "EA-IPPE","400","","","","","","","","","",""
3 ETQ399 "EA-PS","600","","","","","","","","","",""
3 ETQ399 "EA-RETAIL","600","","","","","","","","","",""
3 ETQ399 "ECC-DIMP","600","","","","","","","","","",""
3 ETQ399 "ERECRUIT","600","","","","","","","","","",""
3 ETQ399 "FI-CA","603","","","","","","","","","",""
3 ETQ399 "FI-CAX","603","","","","","","","","","",""
3 ETQ399 "FINBASIS","600","","","","","","","","","",""
3 ETQ399 "INSURANCE","600","","","","","","","","","",""
3 ETQ399 "IS-CWM","600","","","","","","","","","",""
3 ETQ399 "IS-H","600","","","","","","","","","",""
3 ETQ399 "IS-M","600","","","","","","","","","",""
3 ETQ399 "IS-OIL","600","","","","","","","","","",""
3 ETQ399 "IS-PS-CA","600","","","","","","","","","",""
3 ETQ399 "IS-UT","600","","","","","","","","","",""
3 ETQ399 "LSOFE","600","","","","","","","","","",""
3 ETQ399 "NMI_CONT","2006_1_700","","","","","","","","","",""
3 ETQ399 "OBIZ","400_620","","","","","","","","","",""
3 ETQ399 "PI_BASIS","2005_1_700","","","","","","","","","",""
3 ETQ399 "SAP_AP","700","","","","","","","","","",""
3 ETQ399 "SAP_APPL","603","","","","","","","","","",""
3 ETQ399 "SAP_BW","700","","","","","","","","","",""
3 ETQ399 "SEM-BW","600","","","","","","","","","",""
3 ETQ399 "ST-A/PI","01L_ECC600","","","","","","","","","",""
3 ETQ399 "ST-PI","2008_1_700","","","","","","","","","",""
3 ETQ399 "PI","2004_1_470","","","","","","","","","",""
2 ETQ399 Returned table ET_UPG_ADDONS:
3 ETQ399 "DMIS","2006_1_700","","","","","","","","","",""
3 ETQ399 "NMI_CONT","2006_1_700","","","","","","","","","",""
3 ETQ399 "OBIZ","400_620","","","","","","","","","",""
3 ETQ399 "ST-A/PI","01L_ECC600","","","","","","","","","",""
3 ETQ399 "PI","2004_1_470","","","","","","","","","",""
4 ETQ234 Call of function module "SPDA_GET_UPGRADEABLE_ADDONS" by RFC succeeded
4 ETQ239 Logging off from SAP system
4 ETQ010 Date & Time: 20090718111248
4 ETQ399 Initializing Add-on table entries ...
4 ETQ399 ... Add-on DMIS       2006_1_700
4 ETQ399 ... ... ADDONSTAT   = 'R' (registered)
4 ETQ399 ... ... ADDONDECTYP = ' ' (delivered, KEEP YOURS)
4 ETQ399 ... ... ADDONDECOPT = 'A' (else => all)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on EA-APPL    603
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on EA-DFPS    600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on EA-FINSERV 600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on EA-GLTRADE 600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on EA-HR      600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on EA-IPPE    400
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'P' (taken from NCVERS)
4 ETQ399 ... Add-on EA-PS      600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on EA-RETAIL 600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on ECC-DIMP   600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on ERECRUIT   600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on FI-CA      603
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on FI-CAX     603
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on FINBASIS   600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'N' (taken from NCVERS)
4 ETQ399 ... Add-on INSURANCE 600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on IS-CWM     600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on IS-H       600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on IS-M       600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on IS-OIL     600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on IS-PS-CA   600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on IS-UT      600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on LSOFE      600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on NMI_CONT   2006_1_700
4 ETQ399 ... ... ADDONSTAT   = 'R' (registered)
4 ETQ399 ... ... ADDONDECTYP = 'N' (delivered, KEEP YOURS)
4 ETQ399 ... ... ADDONDECOPT = 'K' (KEEP YOURS)
4 ETQ399 ... ... ADDONTRGRL = '2006_1_700'
4 ETQ399 ... ... ADDONCOMP   = 'H' (taken from NCVERS)
4 ETQ399 ... Add-on OBIZ       400_620
4 ETQ399 ... ... ADDONSTAT   = 'R' (registered)
4 ETQ399 ... ... ADDONDECTYP = 'N' (delivered, KEEP YOURS)
4 ETQ399 ... ... ADDONDECOPT = 'K' (KEEP YOURS)
4 ETQ399 ... ... ADDONTRGRL = '400_620'
4 ETQ399 ... ... ADDONCOMP   = 'C' (taken from NCVERS)
4 ETQ399 ... Add-on PI_BASIS   2005_1_700
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'X' (taken from NCVERS)
4 ETQ399 ... Add-on SAP_AP     700
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'V' (taken from NCVERS)
4 ETQ399 ... Add-on SAP_APPL   603
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'R' (taken from NCVERS)
4 ETQ399 ... Add-on SAP_BW     700
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'W' (taken from NCVERS)
4 ETQ399 ... Add-on SEM-BW     600
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'I' (taken from NCVERS)
4 ETQ399 ... Add-on ST-A/PI    01L_ECC600
4 ETQ399 ... ... ADDONSTAT   = 'R' (registered)
4 ETQ399 ... ... ADDONDECTYP = 'N' (delivered, KEEP YOURS)
4 ETQ399 ... ... ADDONDECOPT = 'K' (KEEP YOURS)
4 ETQ399 ... ... ADDONTRGRL = '01L_ECC600'
4 ETQ399 ... ... ADDONCOMP   = 'C' (taken from NCVERS)
4 ETQ399 ... Add-on ST-PI      2008_1_700
4 ETQ399 ... ... NODECPOSS   = 'X' (according to (N)AVERS_EXT)
4 ETQ399 ... ... ADDONTYP    = 'E' (delivered)
4 ETQ399 ... ... ADDONSTAT   = 'M' (merged)
4 ETQ399 ... ... ADDONDECTYP = 'E' (use export version)
4 ETQ399 ... ... ADDONDECOPT = 'E' (use export version)
4 ETQ399 ... ... ADDONCOMP   = 'X' (taken from NCVERS)
4 ETQ399 ... Add-on PI         2004_1_470

Info. about 27 phases while installing patches in erp

Hi,
I want some information about 27 phases while installing patches, plz send list of phases asap.
Thanx and regards,
hari

I would Google/search on SDN with query for more information.
Read and follow the Forum rules
Search SDN/Google before posting your query

Error in XPRA_EXECUTION PHASE on SAINT transacction installing BPC 7.5

Hi
I am installing Bussines Planning & Consolidation 7.5 on an Netweaver 7.01 with EHP1 (enhacement package 1) system but when I used SAINT transacction to install the ADDON for this ABAP component . First I received a message about some "conficts" between some ADDOns so I had to applied an CRT (confict resolution transport) support package to resolve the issue
But the saint transacction stopped on the XPRA_EXECUTION phase and the log message talk about some "BC-SRV-NUM" (number Range Managment) in some table values conteined invalid key number range object values
I found the 1467470 note to fix the issue , I tried to use SNOTE to implemented it but can not be implemented.
Can someone help give me some advices to this issue?
Thanks a lot for your time
Regards

Hi Salman
I understand your issue because the installation guide is not enough clear.
Look
1) Once you installed the ADD-ON CPMBPC on ABAP and follow the installation guide
You have to create on ABAP tier 3 communications data users (user,admin, sysadmin) like guide says and at the end of it , you have to run UJA3_WRITE_SYS_USERS program on se38 and write:
domain windows or local group windows\bpc_user --> for example GGBIDBPC\bpc_user
domain windows or local group windows\ bpc_admin --> GGBIDBPC\bpc_admin
domain windows or local group windows\bpc_sysadmin --> GGBIDBPC\bpc_sysadmin
you should use Domain windows to ensure security environment about users like password or expiration rules
2) On .NET tier when your are installing the BPC Server you have to entry at first time just one user (sysadmin) using the same format:
Domain or local group windows\bpc_sysadmin --> GGBIDBPC\bpc_sysadmin
later you will prompt on next screens enter the System Administrator, Administrator, and User (user IDs), together with their passwords that were created on step 1.
The reality is just sysadmin user is used to BPC configuration on ABAP and .NET tiers
I hope this information be useful
Regards
Luis Antonio Aguirre

Error while upgrading Patch SAPKB70014- Error R3trans received signal 11

Dear All
while updating my basis patch level to sapkb70014 I m facing the error at DDIC import phase related to R3trans recived signal 11.My tp version is accurate as required . Kernel versin is 238 Can you guys help me to solve the same
Regards
Shilpa

Hi
Please continue to run the SPAM again. Also check the Note 822379. If the problem didnt solve yet, post complete log.
Regards,
Rajan

ERROR in ADD-ON conflict phase while upgrading ECC 6.0 system

Hi all,
I am having ECC 6.0 system and am upgrading its SAP-APPL component to 603 patch level 03. I was having SAP-APPL 603 but at patch level 0, i checked for all dependencies and defined the queue in SPAM and it showed all green (OK) for SAP-APPL and so i started but i faced error in add-on coflict phase. It said CRT needed for ADD-ON FICAX release 603. I searched alot but i cant find it on market place. This conflict occured for SAP-APPL 603 patch level 01 it said either include CRT as mentioned above or remove SAP-APPL 60301. Please help me out.

The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60301.
The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60302.
The conflict check detected conflicts between the Add-On FI-CAX release 603 and the OCS Package SAPKH60303.
Check the support packs of components FI-CAX on Service Market place, I think FI-CAX is dependant on SAPKH603301 and others so you can check the import condidtions of FI-CAX on service marketplace and update FI-CAX first then only you would be able to update patch of SAPKH60301
Regards
Subhash

Runtime Error while Upgrading patches and while installing Add-ons

Hi,
I got this error message when i tried to install XL reporter(SAP Addon) addon and i was using the patch 05. I thought it was some problem with the addon and tried to install other add-ons like outlook integeration(SAP add-on) and TDS (Partner Addon). But i have received the same error message.
RunTime Error!
Program:C..
This application as requested the Runtime to terminate it in an unusal way.
Please contact the applications support team for more information
Followed by this message also,
The exception unknown software exception (0X40000015) occured in the application at the location 0X7813461a.
Click on OK to terminate the program
Click on CANCEL to debug the program
One of my implementation consultant suggested me to upgrade the patch to 35. So when i tried upgrading the patch level i have received the same error message.
I have enclosed version details about the software details,
Windows installer Version : 3.1.4000.4042
.Net Framework Version : 2.0.50727.42
Operating System : Windows 2003 Server (5.2.3790)
MS. C++ Redistributable : Installed (MS.C++ 2005 Redistributable)
RAM Availability : 1GB
SQL Server : MS SQL 2005 Server (9.00.1399.00)
Please help me out with this
Regrards,
Vinoth Kumar

Dear Vinoth,
Similar problem was faced by me also.I uninstall the whole SAP Setup .After that Delete SAP folder from Program files where u installed it.
Also in START->RUN->%temp%
Rename the folder "SM_OBS_DLL" to any name you want.
Then install SBO setup and then addon.
Try this it will work.
Gauraw

Error in DDIC_Activation phase for SAP_APPL Patch

Dear Friends,
I am importing several ABAP patches for my IDES 6.0 SR2 system, they are:
- SAP_APPL (SAPKH60007-SAPKH60009)
- FI-CA (SAPK-60007INFICA-SAPK-60009INFICA)
- FI-CAX (SAPK-60007INFICAX-SAPK-60009INFICAX)
The patches are in the same queue.
I have received a stop error in the DDIC_ACTIVATION phase.
It says "View VSCAUFV_CN could not be activated". Please help me resolving the problem since I am not able to process further.
Appreciate your help and reward points too.
The log file of which last few lines are pasted below :
2 ED0348XServer Usage ************************************************************
2 ED0313 Server..............|Workp|Tasks|Error|.Timesum|Objcount|ms/Obj|..KCosts|ms/KCs
2 ED0313 -
2 ED0313 ides60_IDS_00.......|....2|....2|.....|.......0|......13|.....0|.......7|.....0
2 EDO678 Parallel execution: "0" sec., Phase out time: "0" sec., Load: "1,0000000000000000E+02" percent
1 ED0301X*************************************************************************
1 ED0306       "Object Activation"
1 ED0322 End phase "001" ***********************************************************
1 ED0320XStart phase "002" **********************************************************
1 ED0306       "Final log"
1 ED0301 *************************************************************************
1 EDO578XFollowing objects not activated/deleted or activated/deleted w. warning:
2WEDO517X"Table" "VSAFKO_CN" was activated (error in the dependencies)
2WEDO517 "Table" "VSAUFK_CN" was activated (error in the dependencies)
1EEDO519 "View" "VSCAUFV_CN" could not be activated
2WEDO549 "Srch Help" "MGV_COVS" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVB" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVC" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVE" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVF" was activated (warning for the dependent tables)
2WEDO549 "View" "V_AUKVG" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNVA" was activated (warning for the dependent tables)
2WEDO549 "View" "V_VGNWA" was activated (warning for the dependent tables)
1 ED0301X*************************************************************************
1 ED0306       "Final log"
1 ED0322 End phase "002" ***********************************************************
1 ED0320XStart phase "003" **********************************************************
1 ED0306       "Statistics on Activated and Deleted Objects"
1 ED0301 *************************************************************************
1 EDO601XNumber of objects to be activated............: "52"
1 EDO605 Objects not activated........................: "1"
1 EDO606 Activated objects with errors in dependencies: "2"
1 EDO604 Objects activated with warning...............: "8"
1 EDO603 Successfully activated objects...............: "41"
1 EDO602 Number of objects to be deleted..............: "0"
1 EDO608 Objects not successfully deleted.............: "0"
1 EDO607 Successfully deleted objects.................: "0"
1 EDO609 Tables/views with DROP/CREATE................: "0"
1 EDO610 No. of them marked for DROP/CREATE: "0"
1 EDO611 Not marked for DROP/CREATE: "0"
1 EDO620 Number of nametabs to be deleted.............: "0"
1 EDO622 Successfully deleted nametabs................: "0"
1 EDO621 Nametabs that were not successfully deleted..: "0"
1 ED0301X*************************************************************************
1 ED0306       "Statistics on Activated and Deleted Objects"
1 ED0322 End phase "003" ***********************************************************
1 ED0302X=========================================================================
1 ED0314 Mass Activation
1 ED0302 =========================================================================
1 ED0327 Process..................: "ides60_13"
1 ED0319 Return code..............: "8"
1 ED0313 Phase 001..................: 00:00:07 (Object Activation)
1 ED0314 Phase 002..................: < 1 sec. (Final log)
1 ED0314 Phase 003..................: < 1 sec. (Statistics on Activated and ...)
1 ED0309 Program runtime..........: "00:00:07"
1 ED0305 Date, time...............: "20.01.2008", "19:19:00"
1 ED0318 Program end==============================================================
1 ETP155 ACTIVATION OF DD-OBJECTS
1 ETP110 end date and time   : "20080120191900"
1 ETP111 exit code           : "8"
1 ETP199 ######################################

This is the information which I am getting in the system--
The view to be activated must still be adjusted in the database to the new definition in the
ABAP/4 Dictionary.
Procedure
Generally the view is adjusted in the database system by the activating program itself (or
in the release upgrade by a subsequent step of the upgrade process). If this is not
successful, the view is not activated so that there are no inconsistencies between the
ABAP/4 Dictionary and the database system.

Error while approving patch using solman.

Hi All,
I want to download Patch. So I had add it in my download basket.
Now while approving that patch using Solution Manager Maintainance Optimizer I got error.
The error is like " Condition REQUEST_IN_PROCESS is not checked without Change Management integration ". Due this error I am not able to approve the patch, so not possible to download it.
Regards,
Nisit

Hi,
Please see the below link.
http://translate.google.co.in/translate?hl=en&sl=es&u=http://www.mundosap.com/foro/showthread.php%3Ft%3D15318&sa=X&oi=translate&resnum=2&ct=result&prev=/search%3Fq%3Dsap%2BREQUEST_IN_PROCESS%26hl%3Den
Anil

Spam error in xpra_execution phase

hello experts,
         I am applying SAP BASIS PATCH (SAPKB70011) , I got stuck in EPRA_EXECUTION phase.
         It is going on running for more then 10 hours.
         i had restarted the import but still it is showing the same status.
         it is not writing any logs, I checked in SM50 it shows ON HOLD reason RFC, report SAPLSTPA.
         when i checked in SM66 it says CPIC STOPPED.
        I had even tried importing the patch in FOREGROUND, but in status bar it shows "TP BUFFER PREPARED OK " and going on running.
        unable to resolve the issue.
any suggestions
thanks and regards
kavitha

Hi,
Best thing is to raise an oss messasge to SAP,while applying support packages you should not play around.
I think you are applying on a windows system on you would be on oracle 10g or higher version,some of my friend faced the same probelm SAP has suggested to change some memory parameters which i am not very sure.
Regards,
Vamshi.

Error message in 7.01 upgrade patch install

When i try to install the 7.01 upgrade, I get an error message that says "Patch cannot be applied to this version of Adobe Presenter/" I uninstalled and reinstalled Presenter 7 but still no help. Adobe Chat help was an abysmal waste of time. I need to solve the audio problems that 7.01 fixes.

You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
Here are some links to help make contact:
http://www.adobe.com/support/chat/ivrchat.html
http://www.adobe.com/support/download-install/supportinfo/

Error 0x80070522 at 55% while upgrading to Window 8.1 Pro

I am trying to upgrade from Window 8 to 8.1 since 11 Nov. I have attempted all the suggestion found in this forum and also sought HP assistance but the problem is yet to be solved. The upgrade fails at 55% (i.e that is after compatibility check) and returns
error code 0x80070522.
I did post my problem in another thread but was suggested to start a new thread. \
Thanks.

Hi,
The error(0x80042565 VDS_E_INVALID_PARTITION_TYPE) means that the specified partition type is not valid for this operation.
I suggest you backup all your file firstly.
Meanwhile, please perform the following steps to repair the partition.
http://blogs.technet.com/b/asiasupp/archive/2012/03/06/error-quot-we-couldn-t-create-a-new-partition-or-locate-an-existing-one-for-more-information-see-the-setup-log-files-quot-when-you-try-to-install-windows-8-cp.aspx
Regards,
Kelvin hsu
TechNet Community Support

Error during installation phase when upgrading from oracle 10 to 11g

hi,
We have going to upgrade oracle 10.2.0.4 to 11.2.0.3 in SAP ECC 6.4(DB:oracle, OS:AIX6.1). By mistake I run RUNINSTALLER from wrong path oracle/stage/11203 <dump folder>/database instead of SAP folder.it gives some error message during installation but i continue to installation and installation is completed.
now i worried about error and and wrong path selection, i removed manually new oracle home folder 112_64 and continue to new installation from proper path but now i am getting below error when running RUNINSTALLER from SAP folder
"[INS-10008] Session Initialization failed".and log are as
ERROR) - Oracle Database software installation finished with errors.
. The Oracle executable <OH>/bin/oracle is empty or does not exist.
. Possible cause(s): link error, installation was cancelled or interrupted, or fatal error.
. (INFO) - Fatal error occurred during installation

Hi Pawan
Could you refer the SAP Note for Oracle Installation error
1431796 - Oracle 11.2.0: Troubleshooting the Software Installation
BR
SS

Error in preprocessing phase

Hi All ,
We are facing error in preprocessing phase of upgrade to EHP 7 ,Let me know if anyone can help us in this critical situation
System details:Oracle 11gr2,Linux x86-64 ,
Below is the error :
During the phase MAIN_SHDIMP/SUBMOD_SHD2_RUN/RFCDEST_CREATE_S2OX in
Pre-processing of the SUM we are facing below error.
1 ETQ233 Calling function module "FUNCTION_EXISTS" by RFC
2 ETQ373 parameter "FUNCNAME" = "RFC_DESTINATION_CREATE"
1 ETQ234 Call of function module "FUNCTION_EXISTS" by RFC succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ359 RFC Login to: System="XXX", AsHost="sapXXXpas" Nr="12",
GwHost="sapa10pas", GwService="sapgwZZ"
2 ETQ232 RFC Login succeeded
4 ETQ010 Date & Time: 20140912043336
1 ETQ233 Calling function module "RFC_DESTINATION_CREATE" by RFC
2 ETQ373 parameter "DESTINATION_NAME" = "SAP_UPGRADE_ORIG_SYSTEM"
2 ETQ373 parameter "USER" = "DDIC"
2 ETQ373 parameter "HOST" = "sapXXXpas"
2 ETQ373 parameter "SYSTEMNR" = "11"
2 ETQ373 parameter "CHECK" = "X"
1EETQ235 Call of function module "RFC_DESTINATION_CREATE" by RFC failed
(error-status "3")
2EETQ360 RFC of "RFC_DESTINATION_CREATE" failed:
2EETQ361 code/exception : 3
2EETQ362 key : CALL_FUNCTION_NO_DEST
2EETQ399 RFC destination SAP_UPGRADE_ORIG_SYSTEM does not exist.
Regards
Bharat
Mob No: 91 9008804153

Hi Reagan ,
The issue was taken to SAP development security team :::Below is the weird issue ::
Firstly ,for the authorizations to work correctly, all authorization tables must be in a consistent state as below :
ust04, ust10c, ust10s, ust12, usrbf2, usrbf3.
If we want to maintain authorizations, also usr04, usr10, usr12 are required.
But here , a mismatch of tables usrbf2 and usrbf3 in 2 instances are the reason for the stuck in the upgrade :::
SQL> select count(*) from sapsr3.USRBF2 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
2997
SQL> select count(*) from sapsr3.USRBF3 where MANDT = '000' and BNAME =
'DDIC';
COUNT(*)
1
SQL>
SQL> select count(*) from sapsr3shd.USRBF2 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
673
SQL> select count(*) from sapsr3shd.USRBF3 where MANDT = '000' and
BNAME =
'DDIC';
COUNT(*)
1
This issue was resolved by SAP and then upgrade went fine ,This is not an issue with password of DDIC !!!!!
Regards
Ram

Error in XPRA_EXECUTION phase while upgrading patch in solman 7.0.

Similar Messages

Maybe you are looking for