ERROR IN ZIPPED NETWEAVER DNLOAD FROM SAP

I have downloaded both the part of netweaver, but when extracting i get following errors in the parts:
1. In first Part,
!   F:\SAPNW7.0ABAPTrialSP12.part1.tgz: CRC failed in SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz. The file is corrupt
!   CRC failed in SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz. The file is corrupt
!   F:\SAPNW7.0ABAPTrialSP12.part2.tgz: CRC failed in SAPNW7.0ABAPTrialSP12\SAPGUI\sapgui\lprintg.dll. The file is corrupt
!   F:\SAPNW7.0ABAPTrialSP12.part2.tgz: Unexpected end of archive
2. In second Part,
!   F:\SAPNW7.0ABAPTrialSP12.part1.tgz: CRC failed in SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz. The file is corrupt
!   CRC failed in SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz. The file is corrupt
!   F:\SAPNW7.0ABAPTrialSP12.part2.tgz: CRC failed in SAPNW7.0ABAPTrialSP12\SAPGUI\sapgui\lprintg.dll. The file is corrupt
!   F:\SAPNW7.0ABAPTrialSP12.part2.tgz: Unexpected end of archive
what could be the reason...?
Thanx,

Jurjen,
I tried renaming the files to .rar and unzipping them.
I still got the same result
!   C:\Documents and Settings\Mark Markou\Desktop\Downloading Bits & Pieces\SAPNW7.0ABAPTrialSP12.part1.rar: Unexpected end of archive
!   SAPNW7.0ABAPTrialSP12.part1.rar: Unexpected end of archive
!   C:\Documents and Settings\Mark Markou\Desktop\Downloading Bits & Pieces\SAPNW7.0ABAPTrialSP12.part1.rar: CRC failed in SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz. The file is corrupt
!   C:\Documents and Settings\Mark Markou\Desktop\Downloading Bits & Pieces\SAPNW7.0ABAPTrialSP12.part1.rar: Unexpected end of archive
!   CRC failed in SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz. The file is corrupt
When trying to unzip the Load_datasave.gz file an error occurs.

Similar Messages

  • Error when opening PDF files from SAP.

    Hi Gurus
    I have posted this question in ABAP Development section also. Please read the below text.
    We are having a strange intermittent problem with Adobe Reader. When we try to open PDF files from SAP Frontend we get an error pop-up. The pop-up does not have any text. The title of the pop-up has "Adobe Reader". There is a blue question mark and an OK button.
    This issue occurs few times a day in Windows Vista.
    This issue does not occur in Windows XP.
    Since past few weeks, we have been trying to find some error/warning/atleast some text in log files of SAP, OS, Adobe Reader, Registry entries, Event Viewer. So far, we have not found anything.
    SAP is not able to help as this issue occurs intermittently and said when they tried, the issue did not occur. They made two attempts and in each attempt they tried 10 times to reproduce the issue. This issue occurs intermittently.
    Environment
    SAP R/3 4.7 EE SAP_Basis 620 Support Package 61
    Windows Vista Enterprise
    Adobe Reader 9.0 and Adobe Reader 9.1 (tried with both versions)
    SAPGUI 710 Patch 12 (latest patch). It also occured in Patch 11.
    Please suggest
    Thank you
    Pavan

    Now I got to capture the screenshot, however not able to attach/upload here but it says:
    'Reading Untagged Documents'
    lets say i tried to open 6 page document then it said:
    'This 6-page document is untagged and must be prepared for reading. While the document is being
    analyzed, your assistive technology will not be able to interact with this application. '
    then it asked for Reading options
    then a checkbox for to confirm 'Always use the settings from the Reading Preferences (Do not show this dialog again)
    then 'OK/START' and 'cancel' buttons
    It seems, this is the problem with Adobe w.r.t Vista.
    thanks
    Bhudev

  • Error when importing IDOC structure from SAP - Control record missing

    Hi!
    We are hitting problems when importing IDOCs from SAP into the Integration Builder. The import ends successfully but when we drill into the IDOC structure we get a message: <b>Schema for type EDI_DC40.ASN_OUT.DELVRY01.Z1DELVRY (category Data Type) not found</b>. This is only happening for one specific IDOC type only. We have checked all we can think of but cannot get this to work. Any help would be very much appreciated. Of course, points awarded for any good ideas. Thx, Duncan

    Hi Duncan,
    Taka a look at these threads which address similar issues:
    Error during import of FIPARQ01 Idoc
    Error during IDoc Import
    Importing idocs:
    http://help.sap.com/saphelp_nw04/helpdata/en/2b/a48f3c685bc358e10000000a11405a/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/78/21753251ce11d189570000e829fbbd/content.htm
    Hope these help!.
    Cheers,
    Chandra
    Message was edited by: chandravadhana gopalakrishnan

  • ERROR- Unable to retrieve data from SAP systems

    We have installed SAP Netweaver Gateway (NWGW) Tool plugin in mac os.
    When we are trying to browse the services we are able to see only SDATA services in NWGW plugin.
    So we have changed the service from ODATA to SDATA in gateway system. We are able to see the services in the NWGW plugin.
    When we are trying to get the response in xcode by using the following code,
    SDMConnectivityHelper *supConn = [[SDMConnectivityHelper alloc] init];
         LiteSUPUserManager *supUserManager = [supConn activateSUPModeWithHost:@"xxxx" andSUPPort:xxxx andSUPFarmId:@"0" andAppId:@"xxxx"];
         [supConn registerSUPUser:@"xxxx" andPassword:@"xxxx" andSecurityConfigName:@"Basic" andSUPUserManager:supUserManager];
         0262Service *service = [[0262Service alloc] init];
         [service setServiceDocumentUrl:[LiteSUPAppSettings getApplicationEndPoint]];
    NSMutableArray *personalDataArray = [service get02PDWithData:[[supConn executeBasicSyncRequestWithQuery:service.02PDQuery] responseData] error:nil];
    I am getting the following error
    Returned Query URL: /02PD
    ERROR :: SUPJsonException:expected string, found 140/Location:-[SUPRequest startSynchronous] + 1159
    ERROR :: 400:Bad request/Location:-[SUPRequest startSynchronous] + 1184
    Exception during parsing response data. Error: The document is not a valid data document
    <?xml version="1.0" encoding="utf-8"?> <error ><message xml:lang="en">Malformed URL recieved :no protocol: /02PD</message> </error>
    When I am trying to print the end point. I am getting null value
    Please provide us the pointers to resolve the issue

    Sounds like an SAP problem.

  • Error while uploading Transport request from SAP ECC6.0 EHP4 to SAP ECC 5.0

    Hi friends,
    Error while uploading transport request to the transport directory,
    we downloaded the transport request from one sap system which have a set of developments(contains screen programs)
    for example downloaded all co files and data files
    control file: K900470.SAD and Data file: R900470.SAP from transport directory.
    we are trying to upload the transport to another Sap system
    we have
    Uploaded the controlling file K900470.sad to the location  /usr/sap/transpad/cofiles/
    Uploaded the controlling file R900470.sad to the location  /usr/sap/transpad/data/
    we tried to add in the import queues using TCODE: STMS and trying to import.
    During import we get the below error:
    HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
    End with rc : 16
    Please help me on this
    We are trying to copy from ECC 6.0 EHP4 to SAP 5.0 and SAP 4.7EE
    Thanks & Regards
    Murali Papana

    Did you see that you tried to transport to an older release!! You should have expected such a result.
    Before doing such a thing, you should have looked at SAP notes to see SAP recommendations, if any. And you're lucky, there are ones: [Note 1090842 - Composite note: Transport across several releases|http://service.sap.com/sap/support/notes/1090842]. You need to know that ECC6 corresponds to SAP Basis 7.0, and ECC5 corresponds to SAP Basis 6.40.

  • Error while Generating WSDL File from SAP WSDLGenerator

    See the end of this message for details on invoking
    just-in-time (JIT) debugging instead of this dialog box.
    Exception Text **************
    System.NullReferenceException: Object reference not set to an instance of an object.
       at WebServiceDescription.SelectOperation.ShowUDOsList(String sessionID)
       at WebServiceDescription.SelectOperation..ctor(String sessionID)
       at WebServiceDescription.WsdlServicesGenerator.ShowOptions()
       at WebServiceDescription.Form1.btCreateWsdl_Click(Object sender, EventArgs e)
       at System.Windows.Forms.Control.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnClick(EventArgs e)
       at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
       at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
       at System.Windows.Forms.Control.WndProc(Message& m)
       at System.Windows.Forms.ButtonBase.WndProc(Message& m)
       at System.Windows.Forms.Button.WndProc(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
       at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
       at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
    Loaded Assemblies **************
    mscorlib
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
        CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
    WsdlServicesGenerator
        Assembly Version: 1.0.0.0
        Win32 Version: 1.0.0.0
        CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One%20Web%20Services/WsdlServicesGenerator/WsdlServicesGenerator.exe
    System.Windows.Forms
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
    System
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    System.Drawing
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
    System.Xml
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3082 (QFE.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
    System.Web.Services
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Web.Services/2.0.0.0__b03f5f7f11d50a3a/System.Web.Services.dll
    System.Configuration
        Assembly Version: 2.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
    axh7tjvl
        Assembly Version: 1.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    o_2nbqv_
        Assembly Version: 1.0.0.0
        Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
        CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
    JIT Debugging **************
    To enable just-in-time (JIT) debugging, the .config file for this
    application or computer (machine.config) must have the
    jitDebugging value set in the system.windows.forms section.
    The application must also be compiled with debugging
    enabled.
    For example:
    <configuration>
        <system.windows.forms jitDebugging="true" />
    </configuration>
    When JIT debugging is enabled, any unhandled exception
    will be sent to the JIT debugger registered on the computer
    rather than be handled by this dialog box.
    I am facing problem While Generating WSDL File from WSDL Geerator which is provided by SAP Business One
    If any body has resolved this. Please help Me...!
    Thanks
    Mritunjay

    Hi.
    We've seen that error too few times.
    We downloaded the sourcecode for the wdsl generator and discovered,
    that in our case, it was because we had no user defined objects.
    Its actually a bug as far as I can see, where the wdsl generator tries
    to enumerate a empty recordset, and crashes.
    Regards
    Jørgen T.

  • Error in Accessign mySAP ERP from SAP WAS J2ee Engine

    Hi all,
    I have installed some applications on SAP WAS Java System SP17. When i am trying to access the mySAP ERP system from that Application, it is giving the following error
    >(103) RFC_ERROR_LOGON_FAILURE: System received an expired SSO ticket
    My ERP and WAS are on different Windows Domains. I have SSO and  done the trust configurations and imported the Certificate on to mySAP ERP. I also increased the Lifetime of the SAP Logon ticket, but that also didnt work. In one of the documents i found that both the systems need to be in the same OS time.
    1. How can i bring my ERP server and WAS on to same OS time?
    (net time/set   does not work since these machines are in different domains)
    Or is there some other solution to this problem,Please help me
    regards
    deepu

    Hi Deepu,
    as long as the timezones are maintained correctly, the time DISPLAYED may be different, again it is GMT, which is required to be in sync. Looking at IST, do you mean Indian, Israelien or Irelend stadnard time ? (see <a href="http://www.timegenie.com/timezones.php">a list of timezones</a> for details). In any case, 4 hours seams odd to me, should be either
    India: 4:30 hour
    Ireland: 1 hour
    Israel: 1 hour
    can you please make sure, your systems are synced to GMT somehow, for instance using timeservices ?
    From your name, I would guess you might sit in India, in which case at least one of your system is misconfigured (timewise) if they are 4 hours away.
    Countries today 4 hours away from CET would either be
    <a href="http://www.worldtimezone.com/utc/utc+0500.html">russia, pakistan and some more</a> or <a href="http://www.worldtimezone.com/utc/utc-0300.html">some countries in south america</a> (this changes over time
    regards,
    Patrick

  • Error in Posting the data from  SAP ABAP Progra,

    Hi,
    I am sending sap data from ABAP Program,
    I called RFC in the Function Module and given the RFC Destination,
    While I am Executing it is going to short Dump.
    Data is not posting.
    Points will be awarded.
    Regards,
    Jayasimha.

    Dear jaya,
    execute FM once without RFC destination.
    now collect the data in intermediate variable.
    now execute FM with RFC destaination passing collected data as input.
    second RFC is genrally treated as dummy which is used only  for sending data to XI,it doesnt do any "function" as such.
    this should solve your problem gurnteed.
    if you still find short dump please paste your abap code,ll get back to you.
    reason for short dump:
    record set is high and executing module at remote system at a stretch  doesn't work sometimes.
    Thanks & Regards,
    Rama Krishna

  • BPC Error while loading master data from SAP BW

    Hello Guru,
    I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
    I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are  in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP  and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
    I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
    Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
    Q. Do i need to activate any BADI's for this or not ?
    I appreciate your help in advance. I trie

    Hello Guru,
    Currently i am getting below error while loading costcenter master data from BW to BPC.
    Task name MASTER DATA SOURCE:
    Record count: 189
    Task name TEXT SOURCE:
    Record count: 189
    Task name CONVERT:
    No 1 Round:
    Info provider  is not available
    Application: ZRB_SALES_CMB Package status: ERROR
    Anybody can tell me, if i have missed anything ???
    Regards,
    BI NEW
    Edited by: BI  NEW on Feb 23, 2011 12:25 PM

  • Resolve error in F4 help (anyone from SAP??)

    Hi all,
      I tried with this code for F4 help, but i am getting an error. can anyone help me out solving the matter. Is there any way to do F4 help without using MVC and javascript directly in page with flow logic?
    <u><b>CODE</b>:</u>
    <htmlb:inputField id= "Partner"
                      width="100%"
                      showHelp    = "TRUE"
                      onValueHelp =
    "ShowF4KeyAndValueHelp2(<%= mpage_context->m_page_id %>_Partner, 'BUT000-PARTNER')"
                       value       = "//BuPaSearch/Partner " />
    <b><u>Error:</u></b>
    Exception Class CX_SY_REF_IS_INITIAL
    Error Name 
    Program CL_HTMLB_INPUTFIELD===========CP
    Include CL_HTMLB_INPUTFIELD===========CM00B
    ABAP Class CL_HTMLB_INPUTFIELD
    Method RESOLVE_MODEL_BINDING
    Line 95 
    Long text An attempt was made to execute a dynamic method callon an initial(NULL-) object reference. The reference must refer to an object.

    <b>parent.htm:</b>
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <head>
    <script language="javascript">
    function ShowDialog()
    window.showModalDialog('wrapper.htm',window,'dialogHeight=420px,dialogWidth=600px');
    </script>
    </head>
    <htmlb:content design="design2003" >
      <htmlb:page title="Parent Page " >
        <htmlb:form id="form1" >
          <htmlb:tray id                = "tray"
                      width             = "100%"
                      hasMargin         = "false"
                      title             = "Enter Data"
                      hasContentPadding = "true" >
            <htmlb:label for      = "sales_org"
                         text     = "Partner"
                         required = "true"
                         design   = "HEADER1" />
            <htmlb:inputField id          = "partner"
                              showHelp    = "true"
                              onValueHelp = "ShowDialog()"
                              type        = "STRING"
                              doValidate  = "TRUE"
                              value       = "<%= partner %>" />
          </htmlb:tray>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    <b>Wrapper.htm</b>
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <htmlb:content design="design2003" >
      <htmlb:page title="Wrapper to cover " >
        <htmlb:form>
          <iframe  align="center"
                        id="iframe_body"
                        height="350"
                        scrolling="no"
                        width="100%"
                        frameborder="0"
                        name="body"
                        src="sales_org.htm" >
              </iframe>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    <b>Sales_org.htm  layout</b>
    <%@page language="abap" %>
    <%@extension name="htmlb" prefix="htmlb" %>
    <head>
    <script language="JavaScript" type="text/javascript">
              function pass_data()
                   if (top.window.dialogArguments) {
                   if ( document.form1.row_sel.value )
                    top.dialogArguments.document.form1.sorg.value=document.form1.row_sel.value;
                    top.close();
              </script>
    </head>
    <htmlb:content design="design2003" >
      <htmlb:page title=" " >
        <htmlb:form id="form1" >
          <htmlb:tableView id              = "tab01"
                           table           = "<%= details %>"
                           visibleRowCount = "14"
                           width           = "100%"
                           design          = "ALTERNATING"
                           footerVisible   = "TRUE"
                           onRowSelection  = "my_event"
                           selectionMode   = "SINGLESELECT" >
       <htmlb:tableViewColumns>
                      <htmlb:tableViewColumn title      = "Business Partner "
                                             columnName = "partner"
                                             wrapping   = "True" >
                      </htmlb:tableViewColumn>
                   </htmlb:tableViewColumns>
          </htmlb:tableView>
          <htmlb:inputField id      = "row_sel"
                            value   = "<%= rowselected %>"
                            visible = "true" />
          <%
      if rowselected is not initial.
          %>
          <script type="text/javascript">
            pass_data(); </SCRIPT>
          <%
      clear rowselected.
      endif.
          %>
        </htmlb:form>
      </htmlb:page>
    </htmlb:content>
    <b>Oninitialization event:</b>
    select partner from zcrmm_buag into corresponding fields of table details.
    <b>Oninputprocessing:</b>
    DATA: tv TYPE REF TO cl_htmlb_tableview.
    tv ?= cl_htmlb_manager=>get_data(
                          request      = runtime->server->request
                          name         = 'tableView'
                          id           = 'tab01' ).
    IF tv IS NOT INITIAL.
      DATA: tv_data TYPE REF TO cl_htmlb_event_tableview.
      tv_data = tv->data.
      IF tv_data->selectedrowindex IS NOT INITIAL.
        FIELD-SYMBOLS: <row> LIKE LINE OF details.
        READ TABLE details INDEX tv_data->selectedrowindex ASSIGNING <row>.
       partner = <row>-partner.
      ENDIF.
    ENDIF.
    <b>Note: If i uncomment the above line, it gives error...field symbol has not yet been assigned.</b>

  • FUNCTION NOT IMPLEMENTED error when calling C# method from SAP, why?

    Hi,
    I've build a server stub in order to get SAP calling my own methods that exist in the C# world, for that I developed several methods in a class that extends SAPServer and then implemented them...
    I added the special custom properties needed (Abap Name, length, etc) to the function and to its parameters, I've made the ABAP code required to call it...
    I've checked, every parameters that I place in ABAP (importing, exporting and tables) are also defined in C# (its 53 parameters) with the same name (in C# they are in capital letters and in a diferent order but I tried this before and it didn't matter)...
    The name of the function is the same...
    How can I get the 'FUNCTION NOT IMPLEMENT' error in SAP?
    What's going wrong when I get this error?
    Can anyone tell me?
    Is there any place in this site that has a error description and possible reasons?
    When I get a parameter wrong I get a different error (I tried to make smaller functions and they work fine).
    Thanks for the help,
    Nuno Felino
    Message was edited by: Nuno Felino

    Hi,
    I'll explain what I'm doing:
    - we have a set of services made in a C and VB that are available using an API in C#, these services must be available to SAP. So I have a program that will see what parameters the API service requires and makes a proxy so that SAP can call these services.
    To do this I must map SAP types with C#, build the function signature and then implement it. So I cannot use the wizard to do this
    Now, back to the question, what kind of customer attributes I got wrong to get that exception? The most logic is the AbapName of the function but they are equal (the one called in SAP and the one in the customer attributes of the function)...
    Thanks for the answer, can you give me any more hint?

  • Error while opening the report from Sap Business one

    Hi Experts,
    I am facing a Problem while importing a CrystalReport in SAPBusiness One, it displaying an erroru201CNo matching records found u2018Queriesu2019 (OUQR) (ODBC -2028) Message 131-183u201D , and there is no use of this table OUQR in the query.
    Kindly let me know the solution.

    Hi,
    I am having the same issue. I am not able to import Crystal Report.
    the error is "No matching records found  'Queries' (OUQR) (ODBC -2028)  [Message 131-183]"
    I have previewed the report using Preview external crystal report option and is running perfect.
    please guide ASAP.
    Regards
    Sonil

  • Error while displaying PCUI page from SAP GUI

    Hi,
    I did a new development in a SAP GUI report program such that when the report program is called in Portal, on clicking a button, PCUI application for service order will appear. This I did by calling the function module CALL_BROWSER and passing the URL
    (for eg:- http://...../irj/servlet/prt/portal/prtroot/com.sap.portal.navigation.portallauncher.default?NavigationTarget=/roles/com.sap.pct.crm.ServiceManager/ServiceCycle/nf/ServiceOrders/BSPOrdersManager&DynamicParameter=CRM_OBJECT_TYPE%3DSERVICEPROCESSCRM%26CRM_BOR_TYPE%3DBUS2000116%26CRM_OBJECT_ID%3DFD3A2213D9F449CE83D7AF4EDCF642BA%26CRM_LOGSYS%3DCRD100%26sap-syscmd%3Dnocookie%26CRM_LOGSYS%3DCRD100%26CRM_BOR_TYPE%3DBUS2000116)
    This is working fine when the connection is HTTP but when the connection is HTTPS, a new window is opening with Portal header details but the PCUI application is not opening.
    Do I have perform any additional steps to get the application opened up in HTTPS connection?
    Thanks & Regards
    G.Raja

    Hi Matthew,
    Thanks for your reply. The CRM version is CRM 4.0 SP6. Unfortunately the notes could not be used in our scenario.
    The URL is created by us and the function module CALL_BROWSER is called to display the PCUI application. The PCUI application is not getting displayed if the connection is secured (HTTPS) connection.
    Thanks & Regards
    G.Raja

  • Error in Excel while exporting from SAP query.

    Hi Gurus,
    While exporting one SAP query to excel the last row/line of information lost partially.
    Means we get some information in the last line of excel but some information is not exported in that same line.
    Can you throw some light on this please....

    Hi
    Due to special Chracters in the Values sometimes this happens when exporting to excel.
    Please download into Unconverted format selection & after downloading Open with excel & save it in excel
    Thanks & Regards
    Kishore

  • Connect from SAP gateway to RFC server failed

    Good day and a happy new year to you all!
    I am failing to connect to my SAP BW system from BEx. The logon fails with this message:
    >>>>>Start<<<<<<<<<<
    Error Group
    RFC_ERROR_COMMUNICATION
    Message
    Connect from SAP gateway to RFC server failed
    Connect_PM  GWHOST=10.16.64.77, GWSERV=sapgw02, ASHOST=10.16.64.77, SYSNR=02
    LOCATION    SAP-Gateway on host bwsys / sapgw02
    ERROR       timeout during allocate
    TIME        Sat Dec 31 13:16:19 2005
    RELEASE     640
    COMPONENT   SAP-Gateway
    VERSION     2
    RC          242
    MODULE      gwr3cpic.c
    LINE        1785
    DETAIL      no connect of TP sapdp02 from host 10.16.64.77 after 22 sec
    COUNTER     2
    >>>>>>>>>END<<<<<<<<<<<<
    I only experience this problem when connecting using any BEx component, but, I can successfully connect to the SAP BW system from SAP gui.
    Additionally, I have the service 'sapdp02' defined in the services file, both on the workstation and the server.
    What could be wrong or missing in my configuration?
    Regards,
    Joao.

    hi Joao,
    check if oss note 447882 relevant
    you may ask basis for help
    Symptom
    You want to access the customer system using the BEx Analyzer.The connenction fails:The system displays the error RFC_ERROR_COMMUNICATION.In the detail screen, the system displays message "Partner not reached" (host 192.168.4.2, service sapgw 00).
    Other terms
    SAP Gateway, RFC_ERROR_COMMUNICATION, partner not reached
    Reason and Prerequisites
    The SAP gateway host is deactivated or the TCP/IP port 33xx (where xx corresponds to the system number) is not open.
    Solution
    Issue statement ping <IP address> (In this example:192.168.4.2) No reply: Boot SAP Gateway host required.
    An answer:Check whether the TCP/IP port 33xx is open (where xx corresponds to the system number) and start the SAP gateway.
    The TCP/IP port is also partially defined in the services file as an sapgw<SID> or sapgwxx entry (where xx corresponds to the system number). The services file is in the Windows directory or in WinNT/System32/drivers/etc.

Maybe you are looking for