[ERROR:INF] : ConnectionServer Down...

Post Author: ribeiro_pires
CA Forum: Administration
Hi.
When we open a DeskI Document in Infoview we get the error message "ERROR: INF", and the report is not displayed.
One detail is that we have ConnectionServer down (and all others up) and we are unable to start It. We have a AIX installation and we do the following steps without success in order to startConnectionServer:
" [boxi_adm@udc6001bis03]/opt/boxi/bobje$ uname -a AIX udc6001bis03 3 5 00CEED0D4C00 [boxi_adm@udc6001bis03]/opt/boxi/bobje$ stopservers Stopping all... [boxi_adm@udc6001bis03]/opt/boxi/bobje$ startservers Starting all servers...
Starting cms...
Starting pageserver...
Starting cacheserver...
Starting input...
Starting output...
Starting deskijobserver...
Starting destjobserver...
Starting lovjobserver...
Starting reportjobserver...
Starting programjobserver...
Starting webijobserver...
Starting eventserver...
Starting ras...
Starting webi...
Starting ConnectionServer...
Starting fccacheserver...
Starting fcprocserver...
[boxi_adm@udc6001bis03]/opt/boxi/bobje$ ccm.sh -enable all Creating session manager... Logging onto CMS... Creating infostore... Sending query to get all server objects on the local machine... Checking server status... udc6001bis03.cms.aps has been enabled. udc6001bis03.cacheserver.cacheserver has been enabled. udc6001bis03.pageserver.pageserver has been enabled. udc6001bis03.destjobserver.jobserver has been enabled. Input.udc6001bis03.fileserver has been enabled. udc6001bis03.reportjobserver.jobserver has been enabled. udc6001bis03.Web_IntelligenceJobServer.jobserver has been enabled. udc6001bis03.Desktop_IntelligenceCacheServer.dpscacheFullClient has been enabled. udc6001bis03.Desktop_IntelligenceReportServer.dpsprocFullClient has been enabled. udc6001bis03.eventserver.eventserver has been enabled. udc6001bis03.Web_IntelligenceReportServer.webiserver has been enabled. udc6001bis03.ConnectionServer.CsContainer has been enabled. Output.udc6001bis03.fileserver has been enabled. udc6001bis03.Desktop_IntelligenceJobServer.jobserver has been enabled. udc6001bis03.programjobserver.jobserver has been enabled. udc6001bis03.ListOfValuesJobServer.jobserver has been enabled. udc6001bis03.ras.rptappserver has been enabled. Committing changes to infostore... [boxi_adm@udc6001bis03]/opt/boxi/bobje$ ccm.sh -display Creating session manager... Logging onto CMS... Creating infostore... Sending query to get all server objects on the local machine... Checking server status... udc6001bis03.cms.aps is enabled. udc6001bis03.cacheserver.cacheserver is enabled. udc6001bis03.pageserver.pageserver is enabled. udc6001bis03.destjobserver.jobserver is enabled. Input.udc6001bis03.fileserver is enabled. udc6001bis03.reportjobserver.jobserver is enabled. udc6001bis03.Web_IntelligenceJobServer.jobserver is enabled. udc6001bis03.Desktop_IntelligenceCacheServer.dpscacheFullClient is enabled. udc6001bis03.Desktop_IntelligenceReportServer.dpsprocFullClient is enabled. udc6001bis03.eventserver.eventserver is enabled. udc6001bis03.Web_IntelligenceReportServer.webiserver is enabled. udc6001bis03.ConnectionServer.CsContainer is enabled. Output.udc6001bis03.fileserver is enabled. udc6001bis03.Desktop_IntelligenceJobServer.jobserver is enabled. udc6001bis03.programjobserver.jobserver is enabled. udc6001bis03.ListOfValuesJobServer.jobserver is enabled. udc6001bis03.ras.rptappserver is enabled. [boxi_adm@udc6001bis03]/opt/boxi/bobje$
On AIX we get the message that ConnectionServer is enable, but if we access through CMC we get the message that ConnectionServer is down (red icon).
Anyone know a way to start this server, or to solve this Issue?
Thanks.

Post Author: ribeiro_pires
CA Forum: Administration
The file cs.cfg was corrupt. After I've change this file, ConnectionServer has start OK.
Thanks anyway.
M.

Similar Messages

  • Cannot open document (Error: INF)

    We have migrated reports from version Business Objects 6.5.1 to Business Objects XI 3.1 SP2. We have been receiving sporadic 'Cannot open document (Error: INF)' now and again whenever you open Desktop Intelligence reports using Infoview. Have any other users come across this issue using BOXI 3.1 SP2. I do not believe that this issue occurred on SP1.
    This error is very frustrating.
    I have browsed various forums and implemented changes which have had no effect whatsoever including the SAP Marketplace.
    We are also receiving SetPrompts Failed errors. When a report is opened in Infoview and you refresh a report, a blank dialog appears with a red cross. if you refresh the report again then the SetPrompts Failed error appears. I have evene made changes according to article 1364437 based on this error and this has not resolved the issue.
    Regards
    Dipendra

    We're on BOXI3.1 SP2 aswell and we have had the same sporadic issue - Cannot open document for Deski reports. This is causing some serious concern amongst our users over system stability.
    You can recreate the situation by shutting down the InputFileRepository server and you get the same message. I've noticed that when this happens there is a mesage in the fcproc log file 'm_repFileMgr.Download failed'
    My theory is that there may be some congestion in linking between the desktopintelligence server and the inputfilerepository. In addition, we had some logging on the fileserver and at the time of the error there was no mention of the report that failed or any error. We contacted SAP about this but did not get a satisfactory response. There were some heavily utilised DESKi reports which we managed to convert to Webi to take the load off and we also dropped the timeout to 20 minutes (not brilliant but it did mean that if we got the message the users wouldn't have to wait too long before it was resolved in case they couldn't get hold of IT).
    I also upped the parameter for Maximum Retries for File Access in case it was having problems getting the file.
    The result of this was that the error appeared to go away... until yesterday!!!
    Any further insights welcome.

  • BI Launch Pad - Error opening Web Intelligence Report (Error: INF)

    Hi:
    We're working with 4.1 Support Pack 3 Patch 1
    Version: 14.1.3.1300
    We migrated a Webi report from development environment to testing and it was working fine.
    After making some minor changes on the Web Intelligence report, we migrated again, but now when we open the Web Intelligence report we get the following error:
    Faltal Exception occured. The cause was:  com.businessobjects.corba.generic.container.proxy.internal.DependencyFailoverCallbackImpl$FailoverFatalException:
    Prepare failover failed (Error: INF)
    Any ideas?
    Thanks in advance!
    Kind regards,
    Florencia

    Hi Florencia,
    It seems like report is corrupted some how.
    To check report is existing in filestore or not , go to report in Launchpad->Properties->check File name , there should be frs path assigned to it.If not it is corrupted.
    Ex : File Name:frs://Input/a_067/064/004/278595/auytslwhrgrdneqcvzbefs0-guid[atli.nsurgzit4q8pfgonmi].wid
    If it corrupted , check in myfavourites : ~webintelligence folder , there you can find last auto saved instance.If not we may need to create new report.

  • Error "1 (Error INF)" in InfoView when using ; as separator of value

    Can anyone explain me this change of Behaviour before I log a bug ?
    Here is the workflow :
    1. Create a new WebI report using EMP from Oracle
    2. Use Empno, Ename, Job and Mgr objects
    3. Put a query filter on Mgr object In list and then prompt
    4. Run the query and then select few values
    5. save the report
    6. Open the report in Interactive mode
    7.In the left pane 'User Prompt Input' overwrite the existing value by manually inserting new ones separated by ;
    8. Select advanced button
    -> report is running fine
    Do the same workflow as above in BOXIR2 sp4
    -> error 1(Error INF) is coming up
    modify the separator by a , and then no error is coming up prompt is then showing
    Why is that ? Has there been some changes done between the 2 versions ?

    Dear Mat,
    While more details are desirable to give precise answer I guess that I know the origins of the problem. VML functions are thread-safe. VML engineers use Mircosoft TLS mechanism to maintain thread safety of VML global variables. The TLS use is different for static and dynamic case. This implies that it is impossible to use MKL static library which contains TLS stuff to build dynamic library. Indeed, your DllMain function must have VML TLS initialization/processing/finalization stuff (for details see http://msdn2.microsoft.com/en-us/library/ms686997.​aspx). In case VML TLS stuff is absent in your DllMain routine you will see Access Violation on any attempt to access VML global variables.
    VML engeneers are seeking for possible solutions/workarounds. Thus far they don't see any elegant way of solving this with existing technologies. Specifically, _mkl_vml_core_w7_vml_GetMode routine does access one of VML global variables.
    There is a possibility to build custom VML DLL from static MKL library using MKL Builder Tool. The limitation is that the built DLL cannot contain non-MKL stuff (recalling DllMain issue, MKL Builder Tool cannot put into DllMain routine user's stuff).
    Feel free to go to Intel MKL web forum or contact Intel Tech Support in case you have additional questions.
    I will keep you informed.
    Regards,
    Sergey Maidanov
    Intel Corporation

  • (Error RFC 00101) (Error: INF) Large DeskI reports in Infoview.

    Hi,
    I am getting error u2018No server was available to process the request. Please try again later. (Error RFC 00101) (Error: INF)" while opening a DeskI report in Infoview (BOXIR2 SP4).
    Same error appears while viewing scheduled instances of this report. There are more than 1 million rows in the report. WebI report with same data runs properly. No issue in DeskI full client.
    I applied the workarounds mentioned in the SAP notes 1199258, 1199491, etc. Also tried using dedicated servers for the report; no impact.
    Please advice.
    Regards,
    Hitesh

    Hi Hitestwar,
    Try these notes as well
    1363743 - '(DA0005)... no default driver specified state: IM002' and 'RFC 00101 Error INF' errors when refreshing a deskI report in InfoView
    1202263 - Error: "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1336210 - when refreshing Desktop Intelligence report in InfoView "No server was available to process request. Please try again later. (Error: RFC 00101) (Error: INF)"
    1423194 - "No Server was available to process the request. Please try again later. (Error: RFC 00101) (Error: INF)" when refreshing a DeskI document in InfoView
    1200315 - No server was available to process the request.Please try again later(Error:RFC 00101)(Error:INF)
    You can do another thing in the "Help & Support" section on the http://service.sap.com/support/ search for "Error RFC 00101" you will get more references to this issue.
    Or try to set logs on the server and check what is happening.
    Thanks,
    Vivek

  • Error while posting Down Payment

    Hi,
    I got error while posting down payment in F-48. the error was "Special G/L Indicator P is not defined for down payment".
    Thanks,

    Hello,
    "Special G/L Indicator P is not defined for down payment" because you have not maintained this indicator in your system. For maintain this you go to TC: OBYR, dbl down payment indicator P, , give your chart of accounts and press enter. Here you have to give normal Recon A/c and Alternative Recon A/c and save it. Now, go to TC: F-48 and you will able to post it now.
    Thanks
    Para

  • Error when posting Down payment with reference to down payment request

    Hi Experts,
    In October of 2010 we upgraded from version SAP 4.7 to version 604 SAPKH60406.  
    With this upgrade we decided to select the following FM setting:
    "Flag to activate down payment request update to PO history"
    If this flag is set, down payment requests are updated to the purchase order history. In addition, when you create a down payment referencing this down payment request , the down payment request is cleared by the down payment.
    Use- Set this flag if you want to see the down payment requests  in the purchase order history.
    So, since October 2010, the Down payment requests have been updated to the PO history (note - no update of the down payment request was made to the PO status tab) and the down payments (made with reference to the down payment request) have been clearing the DP requests.
    Today we have applied packages SAPKH60407 - SAPKH60409 and we are in the process of testing. 
    Now we are experiencing errors when processing down payments:
    1. create the down payment request (F-47) - this is OK
    2. create the down payment (F-48) with reference to the down payment request - ERROR MESSAGE F5373 - "Order value will be exceeded"
    Can anyone please explain why this is happening?  We would like to keep the "Flag to activate DPR update to PO history" ON
    as it has been since October 2010.
    Thanks,
    Michelle

    Hi,
    Please find the below link it will help full for you,........
    Order Value will be exceeded Msg No. F5373
    Naresh

  • Cannot open document (Error: INF) / Session is closed (Error: INF )

    SAP BO XI3.1
    last time I face this one but suddenly disappear during testing, now we once again face this issue. As all users are member of group 'EveryOne' if we add any user membership to administrator group / master group this error resolved for this user.but that is not proper solutions, so far i m unable to find the rights which is lacking to all user for these report which are available in each user infoview and causing these errors while viewing.
    Open Document error message:
    While viewing Web Intelligence reports
    [Session is closed (Error: INF )|http://yfrog.com/0cwebirightsp|Session is closed (Error: INF )]
    While viewing Desktop Intelligence reports
    [Cannot open document (Error: INF )|http://yfrog.com/mjdeskirightsp|Cannot open document (Error: INF )]

    You might need to give read rights to the folder and category this report belongs to???
    If the problem is fixed when the user who is viweing is an administrator, this means there is insufficient privileges for the other users.

  • "Cannot open document. (Error: INF) Deski docs in WEBI not opening

    Our users are receiving the following error within WEBI when oppening DESKI documents. "Cannot open document. (Error: INF). WEBI files open fine, DESKI files do not.
    I want to break something.
    Any ideas? Many thanks

    We are also having the same issue - personal (i.e. my favorite) Webi documents saved prior to today cause the error: Value Cannot be Null (Error:INF). New Webi documents or documents in the corporate repository are functioning properly.
    Any ideas on how to fix issue is greatly appreciated.
    Thank you

  • Error with Drop -down UI elements in my HCM PF Form

    Hi All,
    I am facing some error with Drop -down UI elements in my HCM PF Form. I have some 2-3 DD elements, which are not binded to any backend field, so i am specifying their values in the UI Properties itself.
    I am able to see my drop-down list values when the form first displays initally. On selecting the values from drop down, when i click on 'Check and Send' button, the form refreshes itself, and all the drop down values dissappear, along with the selected value.
    Can anyone tell me if i am missing anything here ? Do i need to define my DropDOwn field in the Generic Service of HCM PF and then Bind it in the form ?
    Any inputs on this would be welcome !
    Thanks in advance,
    Aditi

    Hi Christopher,
    Am also having the same issue like when am testing the process and clicking on check button, my do_operation method is called and the table SERVICE_DATASETS is getting updated. I am getting success message and all the fields are getting cleared. But when am clicking on second time the CHECK button am getting error's, because of the fields getting cleared in the screen.
    But after executing the process all the fields getting refreshed. Even what ever values I have entered that too is getting cleared. I have debugged and not able to figure it out why its getting cleared.
    I have activated the ISR context mapping and activated the Adobe Form too. I dont know where am going wrong.
    I will be doing the context mapping for ISR via IMG path by clicking the "Compare Form Fields button" also using Tcode HRASR_DT also i have tried.But the form is consistent.
    Do we have any note or patches regarding this issue.
    Please help me out form this as i could not process further in my development.
    Thanks & Regards,
    Raja

  • Webi Report Error: INF

    Hi All
    I am having an issue with one of the WEBI report. As soon as I open the report it pops up a box with header HTTP Status 500 - Internal error and error in the box is (Error: INF). On data refresh it gives the same error after couple of minutes, but if I edit the report and refresh the data (from edit report page) it gets the report contents. There are other reports which are based on the same universe and work fine.
    Any idea/direction is much appreciated.
    Best regards,

    Hi,
    Adapt is actually a tracking system used to track code changes (enhancements, bugs etc.) so that number can be thought of like an incident number.  So you won't see that in your error message.  The Adapt I referenced was not reproducible in FP3.5. 
    It is indeed possible that you are seeing a different problem (sometimes the same error message is given for different problems).  So one last thing I could suggest before you close this off would be that you can raise this to technical support and depending on the exact issue (does it require connectivity to your database etc.) they may be able to test the report internally to confirm it's fixed in 3.5.  However, given that you don't want to patch since you are moving to a new version anyway, that would probably be a waste of time for all parties involved.
    Sorry for the confusion with the Adapt etc.
    Thanks,
    John

  • Save after fold/unfold results in ERROR: INF

    Hello,
    We are on
    Win2003 64bit
    XI R3.1 Service Pack 2
    Sql2005
    lafix 2.0.21
    We are having issues with a report with fold and unfold capabilities. If we view a report, then selectively fold and unfold, then press save. All seems normal. Once you exit, and view the report again you receive an error saying cannot perform this action, error: inf.
    We have tried creating new reports, making the changes in edit mode as well without success. The only way it works is if you import the report into webi rich client, make the changes, and reexport to infoview.
    To replicate
    Create a webi report with breaks.
    Save the report.
    View the report from infoview.
    Selectively fold or unfold different breaks.
    Press the save button.
    Exit from the report.
    View the report again.
    An error appears:
    Open Document box says
    The actioncannot be performed (Error: INF)
    Anyone else experiencing this error?

    Sounds like something that needs to be reviewed with Support.

  • Error:INF

    Post Author: Hennie
    CA Forum: Deployment
    Hi,
    I just installed BO XI Release 2 on a server of a client. They have BO XI R2 running on another server, but due to disk restrictions on that server we need to reload it.
    We've exported all the databases for the original server and loaded SQL 2005 on the backup server. We then imported the data back into the database on the backup server. I load BO XI R2 on the backup server.  Everything went fine and I can open Info View and see the Folders, Reports, and all users created on the original server.
    The problem is that when I try to open a report, I get the error "Cannot open document. Error during import (DX0005) (Error:INF)".
    Can anyone tell me what the possible problem is and how to fix it?
    Thanks
    Hennie

    Post Author: jsanzone
    CA Forum: Deployment
    Hennie,
    BO XI R2 stores reports in a two-phase approach.  The "ID" to the report (which contains the folder name/report name) is stored in the CMS database, however, the report definition (or parameters) are stored in what is called the FS (file store).  I've never tried doing what you did (i.e. move stuff around at the database level and then try to "catch up" with the FS), but you can try one of the following:  either share out the FS on the original server and access that share in your new server (this is done by accessing the CMC, the Input/Output File Store (a server for each) and pointing to the share); or, you can try to copy the items from the FS on the old server to the new server.  IMHO, the correct way to have handled your situation would've been to make "unlocked" copies of the universe off the old server and introduce them to the new server, as well as creating a BIAR file from the old server and loading it to the new server.  As you can see, moving stuff around from server to server in BO XI R2 is not a "simple" task.
    Good luck.

  • Webi Error WIS 10901 Error: INF

    Hi,
    I am running a Query via prompt where in user can select the vendors from the list , if they choose number of vendors less than 1000, then it will run without error. If user will select all the vendors which is around 1537 , user will get this error. Is there any limitation on the prompt in regards to number of selection . Is there any setting in CMC which can increase the threshold to more than 1000
    Following Error I am getting:
    Database Error:ORA-01795 Maximum number of expression in a list is 1000. Contact your business object Administrator or database supplier for more information. (Error: WIS 10901) (Error:INF)

    Hello Ashishm,
    yes - there is a Limitation with 1000.
    Maybe this is a workaround:
    Create two DB Fields on your DB. The First with all Customer # till 1000 and a second with all Customer # above 1000
    Regards
    -Seb.

  • Error when closing down (NetworkUXBroker.exe)

    I get this error when closing down Win 10. Just to let you know...
    NetworkUXBroker.exe
    The instruction at 0x00007FFDA03BB070 referenced memory at 0x000000CA1AD04F0

    Error message when closing down computer
    Ainslie Collison - 09:03pm Sep 12, 2008 Pacific
    Adobe photoshop downloader boot will not shut down automatically when I close down the computer. What settings can I change. I cannot find anything to help in edit/preferences. I have the starter edition.

Maybe you are looking for