Error InfoObject inactive while activation of Business content for cube
I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PM
Hi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye
Similar Messages
-
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error while activating PM Business Content DSO 0PM_DS01
I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
AbhishekHi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar -
Error while activating the Business Content
Hi BI gurus,
I am installing the business content for the sales overview infocube with the grouping option data flow before and install in back ground option. The back ground job is cancelled with the error msg"STDO: Log could not be written on output device T" and at the end it shows ABAP/4 processor: LOAD_PROGRAM_LOST error.
Can any one give solution for this. This is very urgent,
With Regards,
Balachander.SAnd also check whether there are any dumps in ST22.
Khaja -
Error in transfer structure while activating the business content
Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/] -
Error while activating the business content object
Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
ThanksThanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks -
Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul... -
Error during activation of business content
Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance! -
Error while activation of Bi content of Bi cockpit
Hi all,
I am doing BI content activation for BI admin cockpit, from SPRO -- Activation of BI content of BI admin cockpit , i ran the activation but it got failed. The error message says:
DataSource 0TCTBWOBJCT_ATTR from source system BWQCLNT500 could not be activated
This error is coming for data sources :0TCTPRCSVAR_ATTR, 0TCTBWOBJCT_TEXT, 0TCTPRCSVAR_TEXT and 0TCTBWOBJCT_ATTR.
I have applied the sap note 1110642 , 1110641 . also ran the program RSSM_SHIPDVERS_CLEANUP but did not able to find these info packages for this data spurces:
0PAK_8K20VQGEBZRQXUE2PKWS90ZO8
0PAK_934GEKKIBBDKPVMVDJHVNPIMV
0PAK_99MQNPZISKNSNWKT9HF2CWPLK
0PAK_BFYU3MMMU2T2WOI50MXHCEH07
I also tried activating these data sources manually in BI content one by one , there alaso iam getting error :
Data source can not be actvatedm, troied in RSDS also by replicating but says there also that this data source does not exist in source system.
Due to this data sources iam geting problem inmy process chain..
PLease help .Pts wil be assigned.
Thanks and Regards.
AkashAkash you may be wrong.
When I tried to install Technical content in my BW system, I faced the same problem what you have mentioned.
What the system does in such cases is gathers certain system specific informations from teh connected sources. In my case, it tried to install teh datasources to the APO system & the CRM system.
However I unchecked the option while installing from Business Content for these two systems and rest went on fine.
Myself source system was perfectly ok and the DS got installed correctly on BW.
So please check if the error is for other Source Systems.
Regards
Anujit Ghosh
Edited by: Anujit Ghosh on Jul 23, 2008 2:03 PM
While installing from Business Content, do one by one(first InfoProviders, then DataSources etc) using the following help
http://help.sap.com/saphelp_nw70/helpdata/en/48/bc406a800a4226951dcc57428e03f2/frameset.htm
You will find a list of all the related objects here. -
Error in Activating the Business Content Infocube 0CRM_C08
Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUNHi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Errors while transporting the Business Content
hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
Start of the after-import method for object type R3TR IOBJ (Activation Mode)
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manickshi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07 -
Error while installing Business Content SD Cubes
Hello BW Guru's,
I am installing the business content for the sales overview infocube with the grouping option data flow before & later sometime it says that backgorund programm was been modified.
I checked it in st22 its showing an dump with the status msg LOAD_PROGRAM_LOST error.
What could be the problem? how to resolve this issue?
Please through some inputs on this issue....
Points Asssured.
Urs,
RK.Hi,
The LOAD_PROGRAM_LOST error occurs when there are two
or more versions of a given program loaded into the buffer at any given time. This happens when the program is changed by one user while it is still in use by another user.
When a user gets to the program that is having this problem and R/3 attempts to load the generated version from the buffer, it sees that the version is not the most current and tries to swap it out for the most current, but the load was lost from the pxa buffer, hence the dump of LOAD_PROGRAM_LOST.
To correct the error you need to run tranx SAMT & regenerate the program(s) that are listed in the dump. You can then do a $SYNC in the OK code field in the affected applciation server, but the other application servers should not be running. After the $SYNC, the other app servers can be brought up and the
buffers should then be in sync.
Hope this helps,
Regards
CSM Reddy -
XI Business content for MDM - Syntax error in IDOC adapter
Hi mates,
I'm trying out the Master Data Harmonization scenario for Vendor data with R/3 as the client system. I'm using SAP delivered XI Business content for MDM. The mapping program is generating ADRMAS and CREMAS IDocs but the IDOC adapter reports that there is a syntax error in ADRMAS IDOC. Find below the details.
<i><SAP:Category>XIAdapter</SAP:Category>
<SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_IDOC_METADATA</SAP:Code>
<SAP:P1>Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error: Segment 'E1BPAD1VL', segmentnumber '000001' not correct in structure ADRMAS02</SAP:Stack>
<SAP:Retry>M</SAP:Retry></i>
Generated ADRMAS IDOC is
<i> <?xml version="1.0" encoding="utf 8" ?>
<ADRMAS02>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1" />
<E1ADRMAS>
<OBJ_TYPE>LFA1</OBJ_TYPE>
<OBJ_ID>0000500140</OBJ_ID>
<CONTEXT>0001</CONTEXT>
<E1BPAD1VL SEGMENT="1">
<FROM_DATE>00010101</FROM_DATE>
<TO_DATE>99991231</TO_DATE>
<NAME>Swift Transportation</NAME>
<COUNTRY>US</COUNTRY>
<COUNTRYISO>US</COUNTRYISO>
<LANGU>E</LANGU>
<LANGU_ISO>EN</LANGU_ISO>
<SORT1>SWIFT TRANSPORTATION</SORT1>
<TIME_ZONE>CST</TIME_ZONE>
<E1BPAD1VL1 SEGMENT="1">
<LANGU_CR>E</LANGU_CR>
<LANGUCRISO>EN</LANGUCRISO>
<ADDR_GROUP>BP</ADDR_GROUP>
</E1BPAD1VL1>
</E1BPAD1VL>
</E1ADRMAS>
</IDOC>
</ADRMAS02></i>
Strangely, the control record is blank. I looked at the XSLT program, it is coded that way. I do not understand the reason. Is the error pointing to the control record?
Look at the code sample from XSLT mapping program
<xsl:for-each select="IDOC/*/E1ADRMAS">
<IDOC BEGIN="1">
<!-- The header data of each single ADRMAS-IDoc needs to be there but does not require specific data -->
<EDI_DC40 SEGMENT="1"/>
<xsl:apply-templates select="."/>
</IDOC>
</xsl:for-each>
How can an IDOC w/o control record be posted?
Did anyone come across this error? Whats wrong/missing?
I appreciate ur inputs.
thx in adv
praveenMoorthy,
I tried reloading the IDOC metadata from IDX2. Still I get the same error.
Regd, IDOC w/o control record, can u elaborate on "dynamic value while posting IDOCs". From where, XI message SOAP header with Business System replaced by corresponding logical system names?
Thanks
Praveen -
Syntax Error in Routine while Activating Transformation
Dear All,
I am activating whole scenario for 0SD_C03. we have made transformation for 2lis_11_vaitm, during installation we get below errors:
- Rule (target: 0SUBTOT_1S, group: 01 Standard Group): Syntax error in routine
-Rule (target: 0NET_VAL_S, group: 01 Standard Group): Syntax error in routine
-Rule (target: 0PROD_CATEG, group: 01 Standard Group): Syntax error in routine
I really appreciate your any input for this.
Thanks & Regards,
DarshanHi,
I hope there is inbalance in between SOURCE Datapackage and Target Datapackage. So in the start routines pls check it and it not found then add in DATA_PACKAGE...
Check with ABAPer
under ,
TYPES:
BEGIN OF tys_TG_1_full,
SUBTOT_1S TYPE /BI0/OISUBTOT_1S,
and also you can fin dsimilar kind of threads in SDN.
Re: Syntax Error in Routine while Activating Transformation
Re: Issue while creating Transformation from Update rule.
Re: 0IC_C03 activation of Transformation rule ends with ERROR
Re: Error in activation of transformation
Thanks
Reddy -
Question on activation of Business content.
Hi friends,
Our client is implementing BW , and we are in the process of activation of business content, I already some content activated already , for Porcurement, right not I see , in Administrator work bench > Infoprovider TAB>0MMPUR_IO and all the master data objects under neath it and the same under Infosources tab also , so what is the grouping they might have follwed in installing and with what activation they must have started with ( IO, Infoarea, Insource..data targets ..)?
Once we know what they have followed with , we want to continue the same for others .
thank you.You can still activate content with grouping as required but in the process just make sure you set/flag the Match(x)or Copy and Installation will not impact/overwrite already activated objects.
Maybe you are looking for
-
Hi, My ICloud was hacked. So I updated my password and now have my Iphone and the Icloud online email working. Yet the email set up on my Macbook Pro still will not work and I ran through the troubleshooting. It has ICloud IMAP. Can someone pleas
-
Error while updating DBDIFFVIEW table
Hi, When we are doing new entries into the table: DBDIFFVIEW, the error: " Fill table key for table DBDIFFINFO only up to position 040 only " is coming. Since updating the table at DB level directly is not advisable, please advise to correct the abo
-
Photosmart premium all in one and wireless G network
Is the new photosmart premium with built-in Ethernet, WiFi 802.11n backward compatible on b/g wireless network? Will it connect wirelessly to my Linksys WiFi 802.11g network? Thanks!
-
Tree In TableView Using Iterator
Can I creat a Tree in a TableView using Iterator( Which is implemented as a local class in a Model Class)
-
Create New Auxilliary Channel Strip in Logic X ? Taken Away ?
Using create new channel strip setting seems to have been removed or is it a bug ? I took the plunge only to find that a lot has changed in the new DAW. I am particularly distressed that one of the best features on Logic 9 has been removed or just DO