Error: Initial Download of Materials

Hello,
I came across these errors with initial download for materials. I had downloaded relevant cutomizing objects, dnl_cust_prod, -prod1, -prod3, -plnt etc.
Pls suggest any resolutions for the issues listed here.
1 Assign product &1 to a category from hierarchy &2
2 Data on set type & cannot be maintained
3 Logical system &1 does not exist in table TBDLS
4 Category for R/3 product hierarchy & does not exist
5 No descriptions exist for product &1
6 Enter a base unit of measure
Issues:
2. Set types 'COMM_PR_MAT' and 'BBPM_PR_GENERAL'are missing in CRM. Can these be entered manually in CRM. These set types were not created in CRM with customizied download of objects.
3. Does logical system name and RFC destination name has to be maintained same?
4. Can the specific category be created manually in CRM. OR does it have to be done with cutomized objects download.
5. Description is given in R/3 for the product
6. Is the 'base unit of measure' different from 'unit of measure'. How to specifically maintain 'base unit of measure' in CRM
Your help is greatly appreciated and rewarded.
Regards,
Jay

Hello Sebstian,
First check the B doc status in T CODE SMW01,where you select the error or aborted,and give your linked Bdoc with
business obj material in t code R3AC1.
Than in SMW01 goto environment check object link,here u will find the error of this object. If it needs, u have to run request for this object in R3AR2.
I hope it will help you
regards
naren..

Similar Messages

Initial download of MATERIALS

Hi Gurus,
another needed help.....I'm still in the initial download phase and I'm trying to download MATERIALS from ECC to CRM. After several, now resolved, errors about Tax Groups (missing coutries, sequence and values), I'm facing to another blocking problem.
For some materials system retrieves me this error message: "A key was used twice for multirows set_type CRMM_PR_TAX". I've checked this table both in CRM and ECC system: the table is empty, so there should not be a "key"...
Could anyone of you help me?
Thanks in advance,
best regards,
A.

Hello Sebstian,
First check the B doc status in T CODE SMW01,where you select the error or aborted,and give your linked Bdoc with
business obj material in t code R3AC1.
Than in SMW01 goto environment check object link,here u will find the error of this object. If it needs, u have to run request for this object in R3AR2.
I hope it will help you
regards
naren..

Initial Download - Material

Hi,
After I got some errors(COMM_PR_MAT, COMM_PR_SHTEXT) during initial download of materials from R/3 > CRM I found the below helpful information here in the forum. So I checked the assignments of the hierarchy R3PRODSTYP in CRM. Only COM_PR_LGTEXT1 and COM_PR_GTIN were asigned to category MAT_. How can I set these missing assignments? Thanks in advance.
In addition, the SAP-defined CRM set types are assigned to the categories of the hierarchy R3PRODSTYP as follows:
○ The following set types are assigned to the category MAT_:
■ COMM_PR_MAT (basic data on materials)
■ COMM_PR_SHTEXT (description)
■ COMM_PR_UNIT (conversion of units of measure)
■ COMM_PR_LGTEXT1 (basic texts)
As a result, these set types are inherited by all material types.
○ The following set types are also assigned to the category MAT_ if the status Sales is assigned to the material type in the ERP system:
■ CRMM_PR_SALES (sales: distribution chain)
■ CRMM_PR_SALESA (sales: control fields, units of measure, and quantities)
■ CRMM_PR_SALESG (sales: groupings)
■ CRMM_PR_TAX (sales: taxes)
■ CRMM_PR_LGTEXT2 (sales: texts)
■ CRMM_PR_LGTEXT (texts)
● ERP product hierarchies
This information is transferred to the CRM hierarchy R3PRODHIER.
Activities
1. Using transaction R3AS, transfer the following middleware objects for the class CUSTOMIZING:
○ DNL_CUST_PROD0 (storage form of material numbers in sending system)
○ DNL_CUST_PROD1 (material types, material groups, and product hierarchy)
○ DNL_CUST_PROD3 (material statuses in sales and distribution)

Hi Rahul,
If you are done with all your middleware settings (Refer Best practices 1. Generation 2. Connectivity 3. Customizing replication) then you should be ableto see the ERP material in CRM.
Review the documents and check if you have done the settings properly as per the document.
If yes then perform Initial Load R3AS trx for MATERIAL object. Check your filter settings for MATERIAL in R3AC1 trx.

Redo initial download

Hi all,
I did intial download of Materials successfully but forgot to put the set types in place. Now we have completed the config for set types in CRM & I am planning to redo initial download of Materials so that the fields in the set type are re-populated.
Am I following the right step of redoing initial download for above scenario?
Is there any issue or point to be considered before redoing initial download?
thanks,
LSP

LearnSAP,
If you want to get the values into those set types from your OLTP system, then you have few choices
1. If you dont need this data for all materials right away, then whenever the material is changed in R/3, it will trigger down this data in CRM.
However, if you need the data for these set types right away
2. As you indicated do the initial load for product master again
3. You can write a program in CRM to call RFC in R/3 to get the required data for these set types. You can then call FM 'COM_PROD_MATERIAL_MAINTAIN' to update set type data for materials in CRM.
I suggest do the initial load. Its easy and does not involve development.
Please reward points if this helps.
Regards
Haseeb

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

Reg:error in initial download

Hi All,
this is srikanth, i am new in sdn community,
i got an error regarding initial download
while i am downloading bupa_main in r3as -tx
its shows successfully download i checked in r3am1 it shows successfully but in bdoc's messages shows error
i.e1.Business partner with GUID E80239A5DABC3A409A629D9B5E3C12F6 does not exist
regards
srikanth

Hi,
Pls check whether you have created number range in CRM for the Partner and also check if you maintined the Partner Grouping.
For number range:
SPRO: Cross-Application Components > SAP Business Partner > Business Partner > Basic Settings > Number Ranges and Groupings > Define number Ranges
For Partner Gruouping:
SPRO: Cross-Application Components > SAP Business Partner > Business Partner > Basic Settings > Number Ranges and Groupings > Define Groupings and Assign number ranges

BP initial download error: CRM_BUPA_FRG0040, Attribute do not exist

Hi,
I am trying to make an initial download for BPs on CRM 5.0 from R/3 4.7.
For some of the BPs I am getting an error (CRM_BUPA_FRG0040 / 402) saying:
- Attribute 9 09A do not exist
- Attribute 3 2. do not exist
Those BP's having the error were not transferred to CRM.
What could this error be related with?
Dou you have any idea?
Thanks in advance...

Hi Nigne,
i presume the error is related to Classification data of BP. but could not get what is error exactly related to. Please try to check where therea are anything missing in classification data of BP
Siva

Initial Download: object(s) status RUNNING in R3AM1

Hi,
I am trying to download materials from R/3 to CRM for which I am following building blocks B09 and C03. I started downloading customizing objects, initial download for object DNL_CUST_ACGRPB. The status in R3AM1 stays as RUNNING and it's been a while.
All other objects also stay in the same status without any change in block size.
Please let me know any possible reasons and solution to fix this problem. Thank you.
BR.

Hi,
As requested by all, the Basis consultant has tested the RFC settings and they are working fine.
- In SMQ1 (CRM) I can see SYSFAIL for the object DNL_CUST_ACGRPB - on double-click it says there has been a short dump but no dumps can be found in ST22.
- In R3AM1 the queue cannot be found.
- In R3AS - When I execute the download of the object, sys. msg is: Please read the OSS Note no. 212666 (Outbound Queue already exists in CRM:R3AI_DNL_CU
Further details show the error occured in Function module: CRS_FIRST_DOWNLOAD_TRIGGER for the program: SMOF_MONITOR_SMOFDSTAT.
Help plz !
BR.

Problem with initial download of a data object

Dear All,
I have created a data object named "EQUIPMENT", which has three nodes. EQUIPMENT is the header node, DETAILS is the child node to EQUIPMENT and LOCATION is the child node to DETAILS. I have also done explicit key mapping to DETAILS and LOCATION.
I have selected the following as the BE Keys in the nodes.
SERIAL NO in EQUIPMENT header node.
TYPE in DETAILS node.
ZIPCODE in LOCATION node.
In the explicit key mapping of DETAILS node we have selected "SERIAL NO" field in this node.
In the explicit key mapping of LOCATION node we have selected "SERIAL NO" and "TYPE" fields in this node.
Data object contains no errors and i have activated the data object and it was successful.
Then i have also created back adapter which has EQUIPMENT get list and get detail. Get list returns only serial numbers (which is the BE key in EQUIPMENT node). Get detail takes "serail no" as input, returns "DETAILS" and "LOCATION" data in tables parameter. I have tested the get list and get detail interfaces, they are working fine. Then i have activated back end adapter and that was successful.
Now i have triggered an initial download for the "EQUIPMENT" data object, but there is no data downloaded into the data object. I have checked the monitoring in administration portal, it is showing status "Ended with errors", but there is no details of an error.
So can you please let me know what could be mistake i have done or how to check what is the error. Please help us to resolve the issue.
Regards,
Kiran.

Hi Kiran
Are you checking in the NWMA>>Monitoring>>Logs and Traces>>Backend Integration? The logs should have the proper error.
If not can you regenerate the DO, edit and activate your adapter and try again?
Regards
Rohith

Html error while downloading table entries to Excel.

Hi,
I am getting an error while downloading table entries from webdynpro to excel. After some entries below error script comes and this is not comming all the times.
Is this because of large size?Can anyone please suggest me on this?
Here is the dump:
[code]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
 <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 500 Internal Server Error</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP J2EE Engine/6.40 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Application error occurs during processing the request.
<table><tr><td valign="top"> Details:</td><td valign="top"><PRE><pre>com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The stream has already been committed.
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:792)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:780)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:768)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.responseCachedWebResource(WebDynproExchangeHandler.java:98)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.doExchange(WebDynproExchangeHandler.java:189)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doExchangeProcessing(DispatcherServlet.java:164)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:119)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
</pre></PRE></td></tr></table>
</body>
</html>[/code]
Thanks,
Sanjeev

Hallo Sanjeev,
How do you exactly "download the table entries from Web Dynpro to Excel?"
I wrote a new Wiki Code Tutorial which demonstrates how to download an Excel file from a Web Dynpro Table UI element on-demand. In this scenario the resource gets re-created on every request. The solution is based on re-initializing the context with a new 0-byte resource object within the calculated context attribute getter method.
See <a href="https://wiki.sdn.sap.com/wiki/display/Snippets/ExportingTableDatainWebDynproJava-SAPNetWeaver04s">Exporting Table Data in Web Dynpro Java - SAP NetWeaver 04s</a>
Regards, Bertram

Error while downloading Contacts from R/3 to CRM system

Hi All,
I am trying to download Contacts from R/3 to CRM system.
Through Initial Download. For this i have set filters through Tcode: R3AC1
as on KNVP and KNVV for the field VKORG.
As we have our requirement to download contacts based on or differentiating
on 'Sales Org".
We have downloaded our Accounts properly without any errors.
But for Contacts we are facing issues such as one or more extra
relationships are getting created between Contacts and Accounts other than
its original Contacts.
Means already existing contacts are creating more relationships after
download.
But a unique feature is visible for all, All those with false
contact-account relationships.
Contact has field value for 'Address type' missing while the same address
type field is properly added for correct relationships. ( please find attached the screenshot of the same)
Any pointers in which direction we should proceed for the solution would be
appreciated.
Thanks in advance.
Cheers,
Sharad

Dear Vimal,
Sorry not sure then...
Sometimes the RFC connection is refused and use to give that particular error messgae due to:
The old RFC library having version 6.20 automatically converted the
password into uppercase with a size limit of 8 characters before sending it to the SAP system.
The RFC library version 6.40 does not perform this conversion any more, because mixed case passwords upto 40 characters are now supported by SAP Basis version 7.00 (eg. NW2004s) and above.
So need to use upper case passwords when connecting to an SAP system having version less than 7.00.
But this is not valid in this scenario.
Thanks,
Atin

Initial download of Z contract table from R/3 to CRM

Hi,
We have two contract tables called ZCONTRACTHEAD and ZCONTRACTITEM in our R/3 system which we bring to our CRM system to the same respective tables.
We use a downloadable object ZZCONN_HEAD and ZZCONN_ITEM in transaction r3ac1 and do an initial download using r3as.
My problem is that in CRD client 200 which is mapped to R/3 client 200, this download does not bring any data into CRM. The download says complete but I get a BDOC error in SMW01 saying validation error.
This download works perfectly fine in CRD client 100 which is mapped to R/3 client 600.
I know that this is custom table and not a SAP standard table. But I really don't understand why this would work in one client and not in the other client. I have checked the RFC destinations and also did some other initial downloads on CRD 200 which works fine except for this particular table.
Could you please give me your opinion on how can I debug this and find where is the problem? After doing few debugging myself I found out that I am getting the validation error in BDOC in CRD client 200 is because the intitial download is not bringing any record from R/3.
Due to this problem our contract pricing is not working on our DEV system and I am not able to do any further tests or enhancements.
Any suggestion or insight on this will be very helpful.
Thanks,
Prasoon

Hi Michael,
Thanks for your reply. I tried to debug the initial trasfer from CRM to R/3 but I am not able to debug the function in R/3. Also when I do a Test Function module in R/3 I am not sure as what correct parameter to put. I did refer few OSS notes 656823and 573857 but was not able to debug it in R/3. We are on CRM 3.0 Service Pack 14. Could you please suggest as to how can I debug this initial download ?
Since this initial load works perfectly fine in the other client(100) and not in in client 200, I am not sure what could be the problem.
Any suggestions will be appreciated.
Thanks,
Prasoon

Mat. for Initial Download: Table not supported by function "C_"

Hi All,
We are in SRM 5.0 & ECC 6.0 with Classic scenario. While uploading the MATERIAL through R3AS, we have the "Mat. for Initial Download: Table not supported by function C_" & "No product ID determined for material number ... of logical system" error in SMW01.
In SMQ2 in SRM, Queue is blocked with "Error in Mapping (Details: transaction SMW01)"
For your information RFC Users at both the ends have SAP_ALL authorisation. SAP Notes 720819, 420980 & 432339 are implemented.
Please guide me to resolve this issue.
Regards
Ashutosh

hi,
How was the issue resolved , i am having the same problem.
can somebody provide with clue
regards

Error initializing ejb-module; Exception javac.exe not found under

Dear all,
I got followings error after i had tried to doing some lab.I had checked the folder "C:\Program Files\Oracle\jre\1.3.1" exists but missed but missing javac.exe. Could anyone can advice me what is going wrong?
04/04/14 16:44:20 Auto-deploying - web/WEB-INF/classes (No previous deployment found)...
04/04/14 16:44:20 Error instantiating application 'lab04' at file:/C:/share/oc4j
/labs/lab04/: Error initializing ejb-module; Exception javac.exe not found under
C:\Program Files\Oracle\jre\1.3.1, please use a valid jdk or specify the locati
on of your java compiler in server.xml using the <java-compiler .../> tag
Thanks in advance!
Best Regards,
Chris CHIU

Dear Chris,
The answer lies in the error message you got, namely:
please use a valid jdkAccording to your post, you don't have a JDK, you only have a JRE. The javac compiler is part of the JDK, it is not part of the JRE.
You can download the JDK from the J2SE Download Web page. Look for the Download J2SE SDK link -- do not choose the Download J2SE JRE link!
Good Luck,
Avi.

Error: Previous downloads were not completely finished: Termination

Hi,
when replicating an condition adapter object i get a mapping error in SMW01 with detail text:
Previous downloads were not completely finished: Termination
Error when carrying out initial download
The adapter object was definitly downloaded some month ago with a green light in R3AM1
and not changed since then
Now it gets stuck
Someone can help what to do?
Thanks

Hello Norbert,
Please see note 661881.There could be an incorrect entry in table "CND_MAPC_INF_DNL" for the object. Please delete the object from this table and reload again.
Thanks,
Rohit

Error: Initial Download of Materials

Similar Messages

Maybe you are looking for