Error initializing text

Hi Experts
In Ml81n, after adopting the PO,this error is coming(error initializing text),while tracking through navigation button it's taking to messsage class SE and message no. 208: error initializing text.
what may be the cause of error?
Please help
Thanks
Regards
Tushar

Hi,
Please refer to OSS notes 323532 & 905284. You may have to fix the source code.
Cheers !

Similar Messages

Error while making service entry; msg - error initializing text

Dear All,
Please help us with this, we are getting this msg of 'error initializing text' when trying to make a service entry.
The PO was rasied on the service master created using AC03..
Looking for any knid of help...
Thanks & Regards
Arun

the error msg is as given below
<i>Error initializing text
Message no. SE208
Diagnosis
An error has occurred within the system during the initialization of the long text.
Procedure
Please contact your system administrator.</i>

"error initializing import libraries"

Hi, I've spent a week designing all the parts of a portfolio online and now, when I'm trying to open the file from Flash Catalyst to create the interactions, I can't... I've tried everything.. My file have a lot of layers (about 100-125), linked 72ppp jpge images (50 and no more that 200 kb per image) text titles (25) and symbols (20). I've tried creating outlines for text, rasterizing text, creating a .fxg file and with different save options creating .ai files... and I can't open the damned file. I need to work on this project right now because of the deadlines, and I can't believe this program doesn't read anything... please help!!
When I try to open a ai file Catalyst says: "error initializing import libraries" and when I try to open a fxg file it says: "the design you have selected have too many objetcs to import in adobe flash catalyst cs5".
Please, I'd really appreciate any idea, I'm desperate!

Hi, I've spent a week designing all the parts of a portfolio online and now, when I'm trying to open the file from Flash Catalyst to create the interactions, I can't... I've tried everything.. My file have a lot of layers (about 100-125), linked 72ppp jpge images (50 and no more that 200 kb per image) text titles (25) and symbols (20). I've tried creating outlines for text, rasterizing text, creating a .fxg file and with different save options creating .ai files... and I can't open the damned file. I need to work on this project right now because of the deadlines, and I can't believe this program doesn't read anything... please help!!
When I try to open a ai file Catalyst says: "error initializing import libraries" and when I try to open a fxg file it says: "the design you have selected have too many objetcs to import in adobe flash catalyst cs5".
Please, I'd really appreciate any idea, I'm desperate!

Error initializing HTTP tunnel connection

Hi ,
I too got the same error like,
java.io.IOException: Error initializing HTTP tunnel connection:
HTTP/1.0 404 Not Found
Server: servletrunner/2.0
Content-Type: text/html
Content-Length: 95
Date: Wed, 03 Jan 2007 14:59:05 GMT
Here I used J2ME as client application, through servlet runner I am tring to connect to server program. Initially Its worked fine.. But I changed some interner explorer settings. then I got this error. When I changed those setttings to normal also I am not able to connect to the server. Even I reinstall the whole softwares. But the problem is still there.
So could any one help me to resolve the problem.
Its very Urgent project. Its completed but when I try to demonstrate, that day only to connect my PC remotly I changed internet explorer settings very badly. It causes all the damage. Even I changed them to normal also I am not getting any.
Please help me to resolve it.
waiting for your response....
Thanks,
Sri...

Size(kb): 0
Name: TEMPLATE_STORE
Records: 12
Size(kb): 14
Remaining Space(kb): 5831
file://localhost/c:/Nokia/
Midlet exit status: true
file://localhost/root1/
Midlet exit status: true
java.io.IOException: java.io.IOExceptionFilesystem root root1/ is not mounted.
file:///c:/
Midlet exit status: true
file:///e:/
Midlet exit status: true
file:///c:/Nokia/Images/
Midlet exit status: true
file:///c:/Nokia/Videos/
Midlet exit status: true
file:///CFCard/
Midlet exit status: true
java.io.IOException: java.io.IOExceptionFilesystem root cfcard/ is not mounted.
file://localhost/
Midlet exit status: true
java.lang.IllegalArgumentException: Malformed file location.
file://localhost/c:/
Midlet exit status: true
file://localhost/e:/
Midlet exit status: true
Default File System Root is: file://localhost/c:/nokia/vaayoo/
Listing files in directory and its sub directories: file://localhost/c:/nokia/vaayoo/
java.io.IOException: Error initializing HTTP tunnel connection:
HTTP/1.1 400 Bad Request
Date: Mon, 23 Apr 2007 08:13:04 GMT
Server: Apache/2.2.4 (Win32)
Content-Length: 226
Connection: close
Content-Type: text/html; charset=iso-8859-1
Error initializing HTTP tunnel connection:
HTTP/1.1 400 Bad Request
Date: Mon, 23 Apr 2007 08:13:04 GMT
Server: Apache/2.2.4 (Win32)
Content-Length: 226
Connection: close
Content-Type: text/html; charset=iso-8859-1

Error initializing localization module- essmsh

Can anyone tell me why i get an error 'Error initializing localization module' when i execute the 'essmsh' from below path where it is actually stored.
C:\oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseServer\bin>essmsh.exe
However it works fine when i do it from C:\oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin where startMaxl.bat resides without even starting the 'startMaxl.bat' file
I have updated both the path on the environment variable. But no luck. How can i get this executed from anywhere in the system.?
Thanks

Hi Santy, John
My Maxl script 'XXLOAD.msh' is something like this
import database XXX_DEV.XXX data from local text data_file 'C:\oracle\Middleware\user_projects\epmsystem1\Planning\planning1\EMTH\GL_DATA.txt' using server rules_file "NZS_PA_F" on error write to 'C:\INTEGRATION\Data\Dataerror5.log';
and i use the batch to call the above
essmsh -l admin NZSpassword# -s 198.162.49.33 C:\INTEGRATION\XXLOAD.msh
It works fine. But the issue us i can only execute from the path 'C:\oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\bin' where startMaxL.bat reside.
Can you tell me the change that i need to do in the script in order call 'startMaxL.bat' in .bat file before calling msh script.
Thanks

Java.io.IOException: Error initializing HTTP tunnel connection:

Hi,
I am running sample Midlet to communicate to any URL like http://www.google.com or my internal servlet. It is opening the connection but when I try to open the inputstream it gives me following error.
java.io.IOException: Error initializing HTTP tunnel connection:
HTTP/1.1 407 Proxy Authentication Required ( The ISA Server requires authorization to fulfill the request. Access to the Web Proxy filter is denied. )
Via: 1.1 TPSL-PROXY
Proxy-Authenticate: Negotiate
Proxy-Authenticate: Kerberos
Proxy-Authenticate: NTLM
Proxy-Authenticate: Digest qop="auth",algorithm=MD5-sess,nonce="3ace49b386edc8013f52a8f9b7c0638bfb8a6ca60b76bf826632da7cd6185c30d3c61c1a61a0aa91",charset=utf-8,realm="TPSL.LOCAL"
Connection: close
Proxy-Connection: close
Pragma: no-cache
Cache-Control: no-cache
Content-Type: text/html
Content-Length: 722
     at com.sun.midp.io.j2me.http.Protocol.doTunnelHandshake(+333)
     at com.sun.midp.io.j2me.http.Protocol.connect(+145)
     at com.sun.midp.io.j2me.http.Protocol.streamConnect(+57)
     at com.sun.midp.io.j2me.http.Protocol.startRequest(+12)
     at com.sun.midp.io.j2me.http.Protocol.sendRequest(+38)
     at com.sun.midp.io.j2me.http.Protocol.sendRequest(+6)
     at com.sun.midp.io.j2me.http.Protocol.closeOutputStream(+4)
     at com.sun.midp.io.BaseOutputStream.close(+14)
     at HTTPTest.getGrade(+155)
     at HTTPTest.startApp(+8)
     at javax.microedition.midlet.MIDletProxy.startApp(+7)
     at com.sun.midp.midlet.Scheduler.schedule(+270)
     at com.sun.midp.main.Main.runLocalClass(+28)
     at com.sun.midp.main.Main.main(+80)
I think it is going through SSL handshake which implemented in HTTP protocol in J2ME.
I have already done the proxy setup and authentication in Sun Wireless toolkit > preferences > Network configuration.
Still error is there. Please help me regarding this, not able to go ahead and rest in peace.
thanks & regards,
mJK

Hi,
have you checked proxy settings in WTK preferences?
Peter

I have a Text control string box with some initial text. I would like to highlight old text with click of mouse and type in new data from keyboard

I have a text control string box with some initial text (says: Please enter Name). I would like the operator to click on the text control box and have it automatically highlight so that when new data is typed in the old erases (all at once) and the new data is now in the text box.
I tried using the "Text.Selection" property node and when I run it and put the mouse inside the text box the initial text is highlighted and if I press "delete" on the keyboard or if I start to type in new data the initial data does delete but once I start to type new characters they erase each other. For example if I want to type in “Willi
am” I type the “W” and then the “I” but the “I” erases the “W” and now I am only left with an “I” in the text box and so on. I appreciate any help

It seems you are continuously setting the property node over and over again. This should only happen once if you mouse over it.
Create a property node for your text control with the following three items:
(1) KeyFocus (wire a "true" constant to it)
(2) Text.SelStart (Wire a "zero" constant to it)
(3) Text.SelEnd (Wire a constant containing the string length of the text).
Put this property node inside an event structure, triggered by "Mouse enter" on the string control.
(see if the attached example works for you)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Enter_Name.vi ‏23 KB

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

JDev 10.1.3 EA: Error initializing Embedded OC4J

I have installed the latest EA version of JDeveloper on a Linux machine along with JDK 5.0 and when I try to run anything I get:
[Starting OC4J using the following ports: HTTP=8988, RMI=23891, JMS=9227.]
**** Unable to obtain password from principals.xml. Using default.
/home/Mark_Rees/jdevhome/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/config>
/home/Mark_Rees/jdk1.5.0_04/bin/java -server -classpath /home/Mark_Rees/jdev_1013/j2ee/home/oc4j.jar:/home/Mark_Rees/jdev_1013/jdev/lib/jdev-oc4j-embedded.jar -Xverify:none -DcheckForUpdates=adminClientOnly -Xrs -Doracle.application.environment=development -Doracle.j2ee.dont.use.memory.archive=true -Doracle.j2ee.http.socket.timeout=500 -Doc4j.jms.usePersistenceLockFiles=false oracle.oc4j.loader.boot.BootStrap -config /home/Mark_Rees/jdevhome/system/oracle.j2ee.10.1.3.34.12/embedded-oc4j/config/server.xml
[waiting for the server to complete its initialization...]
05/12/29 13:14:24 Application: system is in state FAILED
05/12/29 13:14:24 Error initializing server: Error initializing ejb-modules: No such file or directory; nested exception is: java.util.zip.ZipException: No such file or directory
05/12/29 13:14:24 Fatal error: server exiting
Process exited with exit code 1.
Anyone got any ideas?

Check to see if helps
Unable to start oc4j in Jdeveloper 10.1.3 EA1
In my case I got that error when trying to connect to MySQL database when using OC4J

ERROR(No text fould) for a request loaded into InfoProvider.

Dear Experts,
I'm facing a typical problem. The regular data loads used to be fine. Since past 2 days, when the loads happen through the regular PCs, in some DSOs I find in the Datasource Name column DataSource Name and (No text Found),. The Sourcesystem column shows ERROR and the source system description shows ERROR(No text found). Although, the status of request loaded is green and is available for reporting. But in the next load it throws error saying the previous load is incomplete or improper.
Any help would be highly appreciated.
Thankx and Regds,
Kaushik

Thankx Srinivas for the reply.
But there have been no changes whatsoever, in the source nor in the BI Models. And it is happening continuously for the 3rd day. When I delete and reload, it just works fine.
Regds,
Kaushik

REP-3002: Error initializing printer

Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i, formserver 6i and reports 6i.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by aapmens ():
Hello,
This is my configuraton:
Computer 1 : nt4, sp3, installed: Oracledatabase 7.3.4
Computer 2 : nt4, sp3, installed: Oracle WebDb, forms 6i 6.0.8.8.0, formserver 6i and reports 6i 6.0.8.8.3.
Services WebDb and Listener are running.
I've connected an HP LaserJet III to the parallel port of computer 2. In the printer
control panel of NT4, this printer is set as the 'default' printer.
'myform.fmx' is a simple form.
The code consists only of a 'when-button-pressed' trigger as follows:
declare
pl paramlist;Ln varchar(15) :='Elsa';
BEGIN
pl :=get_parameter_list(Ln);
if not id_null(pl) then destroy_parameter_list(pl);end if;
pl :=create_parameter_list('Elsa');
add_parameter(pl,'DESTYPE', text_parameter,'PRINTER');
run_product(REPORTS,'C:\ORANT\REPORT60\myrep.rep',1,BATCH,FILESYSTEM,pl);
destroy_parameter_list(pl);
END;
'myrep.rep' is a simple report, consisting of:
select user from dual;
generated by the wizard.
When I run the form in preview for the web in formbuilder 6i, then it works very well,
it prints my report.
But when I run it from the cgi 'ifcgi60.exe' by the command
start -> programs -> oracle forms 6i -> run a form on the web
it returns
http://pent2.easyware.be/dev60cgi/ifcgi60.exe?
form=myform.fmx&userid=&otherparams=useSDI=yes&
lookAndFeel=generic&colorScheme=teal
then the error returned in the webbrowser is
'REP-3002: Error initializing printer. Please make sure a printer is installed.'
if parameter 'DESTYPE' is set to 'SCREEN' then it works very well, I can print by clicking the print icon.
Please can someone help me.
Best Regards,
Carl Willems.
[email protected]<HR></BLOCKQUOTE>
null

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analy

Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."

Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium

Acrobat 9 deployment question: error initializing interpreter

I've tried deploying Acrobat 9 silently at (3) client sites with the same result. In all cases the installation finishes with this error message:
Error initializing interpreter: Fatal error
Further patches from this point on will fail to patch the Distiller component, though a repair seems to fix it. Here are the things I have tried to far to no avail. Does anyone have any ideas?
Deploying with the following command-line options:
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QB-
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QB!
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QR
msiexec.exe /i path\to\AcroStan.msi TRANSFORMS=path\to\AcroStan.mst /QN
I have tried this while deploying the following versions:
Acrobat Professional 9.0
Acrobat Professional 9.1
Acrobat Professional 9.2
Acrobat Standard 9.0
Acrobat Standard 9.3.1
I have tried creating an administrative install point as outlined in the deployment guide, but the result is the same.
I have tried installing manually as a domain administrator and with our software distribution tools.
I am out of ideas.

Acrobat is deployed by SCCM => error message
Manual installation works => No error message
it seems that the problem comes from SCCM

Bootstrap.js script error during eval() "Error initializing JDF library"

bootstrap.js script error during eval(). Everytime I open Adobe Acrobat 6.0 I recieve this error message once it loads up. I also recieve another error messeage while it is in the process of loading "There was an error while loading the plug-in "SaveAsXML.api.' This file was not found. I am wondering if this is why I cannot convert a file to PDF from word when I go to convert from file from adobe acrobat 6.0. It is vital to my business that I convert these files from Word. Even when I try to go to Adobe Distiller the error message "Error initializing JDF library" pops up and will not allow me to convert my file to PDF
Thank you

Hello,
I solved the problem (even if I really don't know how) :-/
What I did :
1. remove all the environnement variables for ORACLE : ORASID, ORACLE_SID, ORAHOME, ORACLE_HOME, ORACLE_BASE...
(I don't know why I have so many variables...)
2. I remove any varible of LANG (NLS_LANG, ORA_LANG...)
3. I checked the rpm (it seems that some of the library where missing, for example libXtst.so.6)
By the way, I installed the patch 6078836. Unzip the patch, it will create the library libdb.so.2. Move this file to /usr/lib
4. I uninstall first the agent and the oms, then the database.
5. I reinstalled everything and run the ConfigureGC.pl script. I had to go through the bug 7483221 (the script failed twice because of invalid login/password, ORA-01017). The procedure is described on several sites, I used this one :
[http://www.idevelopment.info/data/Oracle/DBA_tips/Enterprise_Manager/OEM_10.shtml]
I hope it will help you to complete the installation.
Regards

Parsing error: Unexpected text in content of Element

Hello,
I have a problem that is leading me to believe that something is wrong with the struts.jar (ValidatorPlugIn class in particular) file shipped with jdeveloper 11g (11.1.1.1.0). I'm wondering if anybody has experienced this problem and maybe knows a solution.
Following is the error that I receive when deploying the application on weblogic 10.3:
[ERROR] Digester - Parse Error at line 5 column 100: <Line 5, Column 100>: XML-20145: (Error) Unexpected text in content of Element 'field'. <org.xml.sax.SAXParseException: <Line 5, Column 100>: XML-20145: (Error) Unexpected text in content of Element 'field'.>org.xml.sax.SAXParseException: <Line 5, Column 100>: XML-20145: (Error) Unexpected text in content of Element 'field'.
at oracle.xml.parser.v2.XMLError.flushErrorHandler(XMLError.java:422)
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:287)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:335)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:225)
at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:173)
at org.apache.commons.digester.Digester.parse(Digester.java:1666)
at org.apache.commons.validator.ValidatorResources.<init>(ValidatorResources.java:159)
at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:237)
at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:162)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:869)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:336)
at javax.servlet.GenericServlet.init(GenericServlet.java:241)
at weblogic.servlet.internal.StubSecurityHelper$ServletInitAction.run(StubSecurityHelper.java:283)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.StubSecurityHelper.createServlet(StubSecurityHelper.java:64)
at weblogic.servlet.internal.StubLifecycleHelper.createOneInstance(StubLifecycleHelper.java:58)
at weblogic.servlet.internal.StubLifecycleHelper.<init>(StubLifecycleHelper.java:48)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:521)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:1913)
at weblogic.servlet.internal.WebAppServletContext.loadServletsOnStartup(WebAppServletContext.java:1887)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1805)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3041)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1374)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:452)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:117)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:204)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:60)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:629)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:37)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:206)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:53)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:196)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:233)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:173)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:89)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
This error is referring to a file with the following contents:
<form-validation><formset><form name="ShowNotesForm"><field property="PmnNote" depends="required"> <arg0 key="Note"/></field></form><form name="ShowAttachmentsForm"><field property="pmaAttName" depends="required"><arg0 key="Name"/></field><field property="pmaNote" depends="required"><arg0 key="Description"/></field></form></formset></form-validation>
This error occurs wherever there is a white space or a new line character in the contents of a tag! If I have the entire file on one line, then I do not get the error.
In the code above, I placed all the contents of the file on one line and just added one space character (it's right before <arg0 key="Note"/>), that character is causing the error and the stack trace shown above.
If I use an older version of struts.jar (i.e. place it in the domain's lib directory so that it's added to the classpath), then I don't have a problem with white space or new line characters.
Thanks in advance

You are right and very sarcastic at the same time. My bad....however, I figured out the problem, I did not close out my mysql connection and I had an extra if "}" at the end of my code.

Error initializing text

Similar Messages

Maybe you are looking for