Error inserted into my LDAP request by Weblogic

I have been unsuccesful trying to get LDAP working with my installation
(wl8.1 sp2, w2k). I finally loaded a sniffer and captured packets going to
the LDAP server to see what was being sent and I think I have found my
problem. There is some filter entry that it; WL, does not like and it
generates an error message BUT, WL doesn't error out it just inserts the
error message as the filter string in the LDAP request packet; which of
course doesn't work. How can I find out what filter it doesn't like? This is
on the LDAP request packet NOT the reply packet so I know its coming from
the WL server...

If you can, the best way would be to to change the column name from SUBTYPE to something that isn't a SQL reserved key word.
You might get around this particular problem by adding @Column(name = "\"SUBTYPE\"") on your attribute. This will force eclipselink to add quotation marks in the generated SLQ, but I think it will cause problems when it comes to some more complicated queries.
In my opinion, the only safe way here is to not use column names that are in conflict with SLQ reserved key words.
Pedja

Similar Messages

HELP!!: Error inserting into table in exception block

I have some pl/sql code. In the exception section I have several lines of code similar to:
WHEN NO_DATA_FOUND THEN
INSERT INTO SCHEMA.ERR_TABLE (err_num, line)
values ('101', V_LINE);
When I try to compile the code it gives me an error:
(1):PLS-00201: identifier 'TEMP_ERRS' must be declared
(2):PL/SQL: SQL Statement ignored
(3):PLS-00201: identifier 'TEMP_ERRS' must be declared
(4):PL/SQL: SQL Statement ignored
TEMP_ERRS is just a table that exists in a schema?
I tried inserting a record into this table in plain sql code and it worked.
What am I missing??
TIA-
null

I was able to insert a test record into TEMP_ERRS using plain sql, and it worked so I believe I should have the correct previlage.
The only difference is that the PL/SQL code is part of a trigger, what specific previlage would I need?
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Kaleem Mohammed Abdul ([email protected]):
If the table/Synonym is not in the current schema, check for the privileges<HR></BLOCKQUOTE>
null

MS SQL Server 2014: Error inserting into Temp table with index and identity field

In this thread, I mentioned a problem with SQL Server 2014:
SQL Server 2014: Bug with IDENTITY INSERT ON
The question was answered, it is a bug. To keep you informed on this issue, I open this discussion.
Problem:
The code below works perfectly fine on MS SQL Server 2008 R2 and MS SQL Server 2012, but gives an error every second time the proc is executed on MS SQL Server 2014. If I do not define any index on the temp table, the problem disappears. Defining the index
after the insert, does not help.
SET NOCOUNT ON
GO
IF EXISTS (SELECT 1 FROM sys.procedures WHERE name = 'usp_Test') DROP PROC dbo.usp_Test;
GO
CREATE PROC dbo.usp_Test AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #Source(ID integer NOT NULL);
INSERT INTO #Source VALUES (1), (2), (3);
CREATE TABLE #Dest (ID integer IDENTITY(1,1) NOT NULL);
CREATE INDEX #IDX_Dest ON #Dest (ID);
PRINT 'Check if the insert might cause an identity crisis';
SELECT 'Source' AS SourceTable, * FROM #Source;
SELECT 'Destination' AS DestTable, * FROM #Dest;
SET IDENTITY_INSERT #Dest ON;
PRINT 'Do the insert';
INSERT INTO #Dest (ID) SELECT ID FROM #Source;
PRINT 'Insert ready';
SET IDENTITY_INSERT #Dest OFF;
SELECT * FROM #Dest;
DROP TABLE #Source;
DROP TABLE #Dest;
END;
GO
PRINT 'First execution of the proc, everything OK';
EXEC dbo.usp_Test;
PRINT '';
PRINT 'Second execution of the proc, the insert fails.';
PRINT 'Removing the index #IDX_Dest causes the error to disappear.';
EXEC dbo.usp_Test;
GO
DROP PROC dbo.usp_Test;
GO

There is some progress. Communication from a former Microsoft employee tells us this:
Shivendra Vishal
Engineer at Microsoft
I am no longer with MS, and I do not have code access, however from the public symbols, I could make out following:
sqlmin!SetidentI2I4+0x1f3:
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] ds:00000000`00000000=????????????????
ExceptionAddress: 000007fef4d865d3 (sqlmin!SetidentI2I4+0x00000000000001f3)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
This is a read AV and from registers it is clear that we were trying to move the value of location pointed by qword of register rax which is not valid:
rax=0000000000000000 rbx=0000000000000038 rcx=0000000000001030
rdx=0000000000000006 rsi=00000001f55def98 rdi=00000000106fd070
rip=000007fef4d865d3 rsp=00000000106fcf40 rbp=00000000106fcfe9
r8=0000000000000000 r9=00000001f55def60 r10=00000001f55defa0
r11=00000000106fcd20 r12=0000000000000000 r13=0000000000000002
r14=00000001f49c3860 r15=00000001f58c0040
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
The stack is:
# Child-SP RetAddr Call Site
00 00000000`106fcf40 000007fe`f30c1437 sqlmin!SetidentI2I4+0x1f3
01 00000000`106fd050 000007fe`f474e7ce sqlTsEs!CEsExec::GeneralEval4+0xe7
02 00000000`106fd120 000007fe`f470e6ef sqlmin!CQScanUpdateNew::GetRow+0x43d
03 00000000`106fd1d0 000007fe`f08ff517 sqlmin!CQueryScan::GetRow+0x81
04 00000000`106fd200 000007fe`f091cebe sqllang!CXStmtQuery::ErsqExecuteQuery+0x36d
05 00000000`106fd390 000007fe`f091ccb9 sqllang!CXStmtDML::XretDMLExecute+0x2ee
06 00000000`106fd480 000007fe`f08fa058 sqllang!CXStmtDML::XretExecute+0xad
07 00000000`106fd4b0 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
08 00000000`106fd5f0 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
09 00000000`106fd7e0 000007fe`f152cfaa sqllang!CSQLSource::Execute+0x86c
0a 00000000`106fd9b0 000007fe`f152c9e8 sqllang!CStmtExecProc::XretLocalExec+0x25a
0b 00000000`106fda30 000007fe`f152a1d8 sqllang!CStmtExecProc::XretExecExecute+0x4e8
0c 00000000`106fe1e0 000007fe`f08fa058 sqllang!CXStmtExecProc::XretExecute+0x38
0d 00000000`106fe220 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
0e 00000000`106fe360 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
0f 00000000`106fe550 000007fe`f0902267 sqllang!CSQLSource::Execute+0x86c
10 00000000`106fe720 000007fe`f0909087 sqllang!process_request+0xa57
11 00000000`106feee0 000007fe`f2bf49d0 sqllang!process_commands+0x4a3
12 00000000`106ff200 000007fe`f2bf47b4 sqldk!SOS_Task::Param::Execute+0x21e
13 00000000`106ff800 000007fe`f2bf45b6 sqldk!SOS_Scheduler::RunTask+0xa8
14 00000000`106ff870 000007fe`f2c136ff sqldk!SOS_Scheduler::ProcessTasks+0x279
15 00000000`106ff8f0 000007fe`f2c138f0 sqldk!SchedulerManager::WorkerEntryPoint+0x24c
16 00000000`106ff990 000007fe`f2c13246 sqldk!SystemThread::RunWorker+0x8f
17 00000000`106ff9c0 000007fe`f2c13558 sqldk!SystemThreadDispatcher::ProcessWorker+0x3ab
18 00000000`106ffa70 00000000`775d59ed sqldk!SchedulerManager::ThreadEntryPoint+0x226
19 00000000`106ffb10 00000000`7780c541 kernel32!BaseThreadInitThunk+0xd
1a 00000000`106ffb40 00000000`00000000 ntdll!RtlUserThreadStart+0x21
Unassembling the function:
000007fe`f4d8658e 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d86591 4533e4 xor r12d,r12d
000007fe`f4d86594 410fb7d5 movzx edx,r13w
000007fe`f4d86598 4533c9 xor r9d,r9d
000007fe`f4d8659b 4533c0 xor r8d,r8d
000007fe`f4d8659e 488bc8 mov rcx,rax
000007fe`f4d865a1 4489642420 mov dword ptr [rsp+20h],r12d
000007fe`f4d865a6 41ff5230 call qword ptr [r10+30h]
000007fe`f4d865aa 8b5597 mov edx,dword ptr [rbp-69h]
000007fe`f4d865ad 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d865b0 4489642438 mov dword ptr [rsp+38h],r12d
000007fe`f4d865b5 4489642430 mov dword ptr [rsp+30h],r12d
000007fe`f4d865ba 458d442401 lea r8d,[r12+1]
000007fe`f4d865bf 4533c9 xor r9d,r9d
000007fe`f4d865c2 488bc8 mov rcx,rax
000007fe`f4d865c5 c644242801 mov byte ptr [rsp+28h],1
000007fe`f4d865ca 4488642420 mov byte ptr [rsp+20h],r12b
000007fe`f4d865cf 41ff5250 call qword ptr [r10+50h]
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] <=================== AV happened over here
000007fe`f4d865d6 488bc8 mov rcx,rax
000007fe`f4d865d9 4c8bf0 mov r14,rax
000007fe`f4d865dc ff5268 call qword ptr [rdx+68h]
000007fe`f4d865df 488d55e7 lea rdx,[rbp-19h]
000007fe`f4d865e3 4c8b00 mov r8,qword ptr [rax]
000007fe`f4d865e6 488bc8 mov rcx,rax
000007fe`f4d865e9 41ff5010 call qword ptr [r8+10h]
000007fe`f4d865ed f6450a04 test byte ptr [rbp+0Ah],4
I remember few issues with scan2ident function, I am not sure if they have fixed it however it appears that this is intoduced to SQL 2014 and we need help from MS to get this resolved as it needs code analysis.
It is not getting simulated for other versions of SQL apart from SQL 2014.
Also to add, interestingly, the value of rax is not visibly changed and it was successfully passed on to rcx, which has a valid value, so something should have changed the value of rax inside call to function using call qword ptr [r10+50h], and looking at this
it appears that it might be a list of functions and we are going at particular offset [50h]. So, bottom line is that the call to function qword ptr [r10+50h], should be changing something in rax, and debugging/analyzing this code might give us some more idea.

Error inserting into database

need help,am tryin to insert data into my database which contains date,
names,phone,address and deposit and it's giving this error message:
java.lang.ClassCastException:java.util.Date cannot be cast to java.sql.Date.
somebody help me please.thanks in advance.
code:
'\n'
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.sql.*;
import java.text.*;
public class NewCustomerRecord extends JFrame{
     private JTextField firstnameF,othernameF,phoneF,addressF,depositF,currentF,dateF;
     private JButton registerbutton;
     private Connection con;
     private Statement st;
     private ResultSet set;
     private PreparedStatement stat;
     public NewCustomerRecord(){
          //super(f,"",true);
          JPanel panel = new JPanel();
          panel.setLayout(null);
          JLabel firstL = new JLabel("First Name:");
          firstL.setBounds(5,15,80,20);
          panel.add(firstL);
          firstnameF = new JTextField();
          firstnameF.setBounds(70,15,100,20);
          panel.add(firstnameF);
          JLabel otherL = new JLabel("Other Names:");
          otherL.setBounds(175,15,80,20);
          panel.add(otherL);
          othernameF = new JTextField();
          othernameF.setBounds(255,15,100,20);
          panel.add(othernameF);
          JLabel phoneL = new JLabel("Phone No.:");
          phoneL.setBounds(5,40,80,20);
          panel.add(phoneL);
          phoneF = new JTextField();
          phoneF.setBounds(70,40,100,20);
          panel.add(phoneF);
          JLabel addressL = new JLabel("Address:");
          addressL.setBounds(185,40,80,20);
          panel.add(addressL);
          addressF = new JTextField();
          addressF.setBounds(255,40,100,20);
          panel.add(addressF);
          JLabel depositL = new JLabel("Deposit:");
          depositL.setBounds(5,65,60,20);
          panel.add(depositL);
          depositF = new JTextField();
          depositF.setBounds(70,65,100,20);
          panel.add(depositF);
          /*JLabel currentL = new JLabel("Current Bill:");
          currentL.setBounds(135,65,80,20);
          panel.add(currentL);
          currentF = new JTextField();
          currentF.setBounds(205,65,50,20);
          panel.add(currentF);*/
          JLabel dateL = new JLabel("Date:");
          dateL.setBounds(185,65,50,20);
          panel.add(dateL);
          dateF = new JTextField();
          dateF.setBounds(255,65,100,20);
          panel.add(dateF);
          registerbutton = new JButton("Register Customer");
          registerbutton.setBounds(115,100,145,20);
          registerbutton.addActionListener(new ActionListener(){
               public void actionPerformed(ActionEvent e){
                    insertRecord();
                    dispose();
          registerbutton.setMinimumSize(new Dimension(50,20));
          panel.add(registerbutton);
          add(panel);
          setSize(400,200);
          setDefaultCloseOperation(EXIT_ON_CLOSE);
     public void insertRecord(){
          double bal=0.0;
          String s=depositF.getText();
          double dep = Double.parseDouble(s);
          bal+=dep;
          //String ss=dateF.getText();
          //short dd=Short.parseShort(ss);
          String ss=Double.toString(dep);
          String bb=Double.toString(bal);
          String fullName=firstnameF.getText()+"\t"+othernameF.getText();
          try{
               Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
               con=DriverManager.getConnection("jdbc:odbc:sparkletransaction","","");
               SimpleDateFormat sdf = new SimpleDateFormat("dd/mm/yy"); //added
               Date d = (Date)sdf.parse(dateF.getText());
               //java.sql.Date date = new java.sql.Date();
               //date.setTime(d.getTime());
               String insert="INSERT INTO personaltransaction(date,name,phone,addres,deposit,balance) VALUES(?,?,?,?,?,?)";
               //insert=insert+;
               stat=con.prepareStatement(insert);
               stat.setDate(1,d);
               stat.setString(2,fullName);
               stat.setString(3,phoneF.getText());
               stat.setString(4,addressF.getText());
               stat.setString(5,ss);
               stat.setString(6,bb);
               stat.executeUpdate();
               stat.close();
          catch(Exception e){
               System.out.println(e);
     public static void main(String[] arg){
          new NewCustomerRecord().setVisible(true);
}

java.lang.ClassCastException:java.util.Date cannot be
cast to java.sql.Date.
Hint:
public static java.sql.Date convert2SqlDate(java.util.Date date) {
    return new java.sql.Date(date.getTime());
}

Error:insert into testtable numbercolumn values('9,000.00')

In testtable, ID(number(12), amount(number(12))
Now I want to insert the following record. I got error,a invalid number .
insert into testtable(id,amount) values('111','9,000.00');
I think data type is different. amount is number type but '9,000.00' is varchar2.
How can i insert '9,000.00' to number data type?
I do insert to_number('9,000.00'). It doesn't work. Would you help me for this problem.

Since the datatype is number, if your data is not coming from any convertable source as '9,000.00' (i.e a big auto-generated file from another system that needs data conversation), why bother when oracle will still store it in the table as 9000.
SQL> create table testtable (ID number(12), amount number(12));
Table created.
SQL> insert into testtable(id,amount) values(111,to_number('9,000.00','9,999.00'));
1 row created.
SQL> select * from testtable;
ID AMOUNT
111 9000
SQL> insert into testtable(id,amount) values(111,9000);
1 row created.
SQL> select * from testtable;
ID AMOUNT
111 9000
111 9000
SQL>

APEX 4.0 install error - insert into wwv_flow_flash_map_regions

Hi guys,
just to let you know, I have just tried to install apex_4.0.zip into my local 11.2 instance on Windows7.
I was hitting the following problem:
insert into wwv_flow_flash_map_regions(id,file_id,region_id,region_name,centroid_x,centroid_y) values(223,9,'DNK-VBR','V
iborg','9.06804513931274','56.6578197479248')
FEHLER in Zeile 1:
ORA-01722: Ungnltige Zahl
After setting
set NLS_LANG=AMERICAN_AMERICA.WE8MSWIN1252 before starting sqlplus and then running the apexins.sql script it worked fine.
My NLS settings in the registry are as follows:
NLS_LANG=GERMAN_GERMANY.WE8MSWIN1252
Cheers,
Dietmar.

New files will be available between 11:30 - 12 PT that will fix this issue. Please download again after that time.
-- Sharon

OLEDB Syntax error INSERT INTO in DAL

hi guys im having problems with my DAL in my school project
before im starting new one maybe you can help me
using
System;
using
System.Collections.Generic;
using
System.Linq;
using
System.Web;
using
System.Data;
using
System.Data.OleDb;
public
class
DAL
private
string dbPath;
private
OleDbConnection conn;
private
OleDbCommand command;
private
OleDbDataAdapter adpter;
private
string strQuery;
public DAL(string
dbPath)
this.dbPath = dbPath;
string ConnectionString =
string.Format(@"Provider=Microsoft.ACE.OLEDB.12.0;Data
Source={0}", dbPath);
        conn =
new
OleDbConnection(ConnectionString);
        command =
new
OleDbCommand(strQuery, conn);
        adpter =
new
OleDbDataAdapter(command);
public
DataSet GetDataSet(string
strSql)
DataSet ds =
new
DataSet();
        command.CommandText = strSql;
        adpter.SelectCommand = command;
        adpter.Fill(ds);
return (ds);
public
void SetDataSet(DataSet
ds)
OleDbCommandBuilder builder =
new
OleDbCommandBuilder(adpter);
        adpter.InsertCommand = builder.GetInsertCommand();
        conn.Open();
        adpter.Update(ds);
        conn.Close();
public
bool InsertRow(string
sqlInsert)
int rowsEffected;
        command.CommandText = sqlInsert;
        conn.Open();
        rowsEffected = command.ExecuteNonQuery(); // -------> the problem is here <--------
        conn.Close();
return (rowsEffected > 0);

Hi
tzaxcu,
Did you get some error information? Could you please post more information here?
Best wishes!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error when inserting into a table

Hi,
I am running this insert stmt
SQL> insert into cntct select * from CUSTSRV_ADMN.cntct_bk1;
ERROR at line 1:
ORA-01733: virtual column not allowed here
Below is the table structure.
SQL> desc cntct;
Name Null? Type
CNTCT_KEY NOT NULL NUMBER(10)
CNTCT_NUM NOT NULL CHAR(12)
SRC_SYS_DESC NOT NULL VARCHAR2(5)
ACTVTY_DT NOT NULL DATE
CNTCT_TYPE_DESC NOT NULL VARCHAR2(15)
CNTCT_INIATR_CD NOT NULL CHAR(1)
CNTCT_INIATR_DESC NOT NULL VARCHAR2(10)
CNTCT_INIATR_NAME NOT NULL VARCHAR2(30)
CNTCT_INIATR_PHONE_NUM VARCHAR2
CNTCT_STUS_CD NOT NULL CHAR(1)
CNTCT_STUS_DESC NOT NULL VARCHAR2(10)
CNTCT_AGE_DAYS_CNT NOT NULL NUMBER(4)
CNTCT_ELPSD_TIME_SEC_CNT NOT NULL NUMBER(10)
CNTCT_RCVD_DT NOT NULL DATE
CNTCT_OPEN_DT NOT NULL DATE
CNTCT_RSLTN_DT NOT NULL DATE
CNTCT_NEW_IND NOT NULL CHAR(1)
HIGHST_NMIS_CD NOT NULL NUMBER(1)
INIATNG_AGENT_KEY NOT NULL NUMBER(5)
CLSNG_AGENT_KEY NOT NULL NUMBER(5)
CNTCT_ID NOT NULL VARCHAR2(20)
IMG_NUM NOT NULL VARCHAR2(13)
PRVDR_NPI NOT NULL VARCHAR2(10)
PRVDR_TIN NOT NULL VARCHAR2(9)
CNTCT_OPEN_DTIME NOT NULL DATE
CNTCT_RSLTN_DTIME NOT NULL DATE
Please advise.
Regards,
Narayan

No its another table.
I also tried using columns instead of '*'
SQL> insert into cntct
2 select CNTCT_KEY,
3 CNTCT_NUM,
4 SRC_SYS_DESC,
5 ACTVTY_DT,
6 CNTCT_TYPE_DESC,
7 CNTCT_INIATR_CD,
8 CNTCT_INIATR_DESC,
9 CNTCT_INIATR_NAME,
10 CNTCT_INIATR_PHONE_NUM,
11 CNTCT_STUS_CD,
12 CNTCT_STUS_DESC,
13 CNTCT_AGE_DAYS_CNT,
14 CNTCT_ELPSD_TIME_SEC_CNT,
15 CNTCT_RCVD_DT,
16 CNTCT_OPEN_DT,
17 CNTCT_RSLTN_DT,
18 CNTCT_NEW_IND,
19 HIGHST_NMIS_CD,
20 INIATNG_AGENT_KEY,
21 CLSNG_AGENT_KEY,
22 CNTCT_ID,
23 IMG_NUM,
24 PRVDR_NPI,
25 PRVDR_TIN,
26 CNTCT_OPEN_DTIME,
27 CNTCT_RSLTN_DTIME
28 from CUSTSRV_ADMN.cntct_bk1;
Still have the same error.
insert into cntct
ERROR at line 1:
ORA-01733: virtual column not allowed here
Please advise.
Regards,
Narayan

ORA-06502: error when inserting into table via db link with long datatype

Folks,
I am getting the following error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
This occurs when an insert is done via a database link into a table that has a LONG data type for one of the columns, and the string contains some carriage returns and or line feeds.
I have checked by removing the db link, and inserting into a local table with identical column data types, where there is no error.
So this might be another db link bug?
So I need to remove the carriage returns and/or line feeds
in my pl/sql block in the page process. I have tried
l_text := REPLACE(l_text, CHR(10), ' ');
l_text := REPLACE(l_text, CHR(13), NULL);
but still getting the ORA-06502. Would really appreciate some advice here, please.
Cheers
KIM

Scott,
Time to 'fess up':
My fault sorry, the error was coming from another page process where I had allowed insufficient string length for one of the variables, and my error message did not identify the page process clearly.
This leads me to make a request for future releases, could the system error messages state which page process caused the problem?
One other thing I notice, and this might be a feature not a fault, the page processes are numbered: "Page Process: 3 of 5". However process 3 is not the 3rd one to be processed, and probably refers to the order in which they are created. Should the number reflect the process order?
Cheers
KIM

URGENT - Insert into database error

Hi people.
I am using this code to insert multiple records into a table from a multi select box.
Sometimes it works, other times It throws an error saying:
Error. [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt
Why would this be? and how can I fix this?
<%
int memberId = 0;
int groupId = Integer.parseInt(request.getParameter("groupId"));
String[] x = request.getParameterValues("totalUsers");
String groupName = "";
String name = "";
String groupId2 = "";
String name2 = "";
int m = x.length;
String query = "SELECT MemberID FROM tGroup_X_Member WHERE (MemberID IN (SELECT memberID FROM tGroup_X_Member WHERE (MemberID IN (SELECT UogID FROM tSubject WHERE Name IN (SELECT CallerName FROM CALLS WHERE CallerName = ?)))))";
String insertQuery = "INSERT INTO tGroup_X_Member(MemberID, GroupID)" + "VALUES (?, ?)";
Connection conn = null;
PreparedStatement prep = null;
PreparedStatement prep2 = null;
ResultSet rSet = null;
try {
DBConnection db = new DBConnection();
conn = db.conn;
conn.setAutoCommit(false);
prep = conn.prepareStatement(query);
prep2 = conn.prepareStatement(insertQuery);
for (int i=0; i<m; i++) {
prep.setString(1, x);
ResultSet resSet = prep.executeQuery();
if (resSet.next()) {
memberId = resSet.getInt(1);
prep2.setInt(1, memberId);
prep2.setInt(2, groupId);
prep2.executeUpdate();
conn.commit();
response.sendRedirect("modifyGroupExpand.jsp?groups=" + groupId);
} catch (Exception ex) {
try {conn.rollback();} catch (Exception ex1) {ex1.printStackTrace();}
out.println("Error. " + ex.getMessage());
finally {
try {rSet.close();} catch (Exception ex1) {ex1.printStackTrace();}
try {prep.close();} catch (Exception ex1) {ex1.printStackTrace();}
try {prep2.close();} catch (Exception ex1) {ex1.printStackTrace();}
try {conn.close();} catch (Exception ex1) {ex1.printStackTrace();}
}%>
Thanks

Looks like you might be trying to insert a row before all of the rows are returned from the query, this is possible - how many rows do you get back on the members that fail the insert?
You could create a seperate connection for the inserts or move to your last row before starting to insert.
Secondly, your query seems very intense with all the sub selects. Will the following not work?
Select tGroup_X_Member.MemberId
From tGroup_X_Member, tSubject, CALLS
Where tGroup_X_Member.MemberID = tSubject.UogID And
tSubject.Name = CALLS.CallerName And
CALLS.CallerName = ?

Why this Error comes "ORA-01461: can bind a LONG value only for insert into

I'm using Oracle 9.2 with Weblogic 8 server. After Googling i got to resolve this issue "ORA-01461: can bind a LONG value only for insert into a LONG column" by adding : oracle.jdbc.RetainV9LongBindBehavior=true in server properties for the datasource.
But why did this error come and after keeping the above property why did this error go away ?
Can anyone help me on this.....

You have an error in the code:
1. you don't provide a value for 'what' - you have to tell Oracle what it should execute when it submits the job.
And remember - with ISUBMIT the next_date parameter has datatype VARCHAR2 - SUBMIT uses datatype DATE. So make sure you provide a VARCHAR2 value and do not rely on implicit conversion.
>
PROCEDURE DBMS_JOB.ISUBMIT
(job IN BINARY_INTEGER
,what IN VARCHAR2
,next_date IN VARCHAR2
,interval IN VARCHAR2 DEFAULT 'null'
,no_parse IN BOOLEAN DEFAULT FALSE);
PROCEDURE DBMS_JOB.SUBMIT
(job OUT BINARY_INTEGER
,what IN VARCHAR2
,next_date IN DATE DEFAULT SYSDATE
,interval IN VARCHAR2 DEFAULT 'null'
,no_parse IN BOOLEAN DEFAULT FALSE);

Error adding BW object into a transport request

Hi all, I'm modifying an OHD and when I'm trying to save into a new request I got the following error: "Attention!. The selected object is already locked by another transport request". And it shows me which is the TR that has the object locked, however, when I go to SE10 in order to check if the object its locked there, it is not!. Any ideas on how to solve this problem?
Mauro

Did you try unlocking from SE03 - enter that request which system warned and execute and try collecting the Object again in new request
SE03 - Search for Objects in Requests/Tasks - enter IOBJ - Obj tech name - select Modifiable option and execute .. you will see the request numbers .. where this object is locked

ORA-00604 error when trying to insert into a XMLTYPE stored as BINARY

Hi. Here's the scenario.
Here's my Oracle version:
Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
The database is encoded as AL32UTF8.
First I create the table...
create table binary_table (the_field XMLTYPE) XMLTYPE COLUMN the_field STORE AS BINARY XML;
Now I try and do an insert like this...
insert into binary_table values (xmltype('<?xml version="1.0" encoding="AL32UTF8"?>' || chr(10) || '<a>b</a>' || chr(10)));
and I get this error:
SQLState: 60000
ErrorCode: 604
Position: 122
Error: ORA-00604: error occurred at recursive SQL level 1
ORA-00942: table or view does not exist
If I create the table with a CLOB storage option for the XMLTYPE, the insert works fine. If I repeat these steps in another database instance, same Oracle version, that's encoded as WE8ISO8859P1, it also works fine. It behaves the same in several clients. I also tried it with several different values for NLS_LANG and that didn't help.
I do want to say that this database instance has just been set up especially for me so I can do some R&D on AL32UTF8 and XMLTYPE to see if it fits our needs. So it might be a problem with the database instance.
Thanks for taking a look at this.
Ralph
Edited by: stryder100 on Jul 24, 2009 12:11 PM

Hi,
Use this
Load data
append Into TABLE HS_HRMIG_EMP_PER_20MAR07 fields terminated by "," optionally enclosed by '"'
TRAILING NULLCOLS.
Here optional enclosed by is for doubles quotes which should needs to place in single quotes.
like '"'.
try with this.
--Basava.S

Inconsistent datatypes error when inserting into a object

I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1                VC2_40,
ADDR2               VC2_40,
CITY_TX          VC2_40,
COUNTY_CD          VC2_40,
POST_CD          VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX           NAME_T,
FNAME_TX           NAME_T,
BIRTH_DATE          DATE,
TELEPHONE          VC2_20,
EMAIL               VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID     NUMBER (10),
PERSON     PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypes

Gavin,
What is your VC2_40 and NAME_T type definition? Your insert used these as varchar2, which is a built-in type not a user-defined type. If you explicitly define these to be varchar2's, the insert statement works fine.
Regards,
Geoff
I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1                VC2_40,
ADDR2               VC2_40,
CITY_TX          VC2_40,
COUNTY_CD          VC2_40,
POST_CD          VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX           NAME_T,
FNAME_TX           NAME_T,
BIRTH_DATE          DATE,
TELEPHONE          VC2_20,
EMAIL               VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID     NUMBER (10),
PERSON     PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypes

Oracle error ORA-01461when trying to insert into an ORACLE BLOB field

I am getting Oracle error ‘ORA-01461: can bind a LONG value only for insert into a LONG column' when trying to insert into an ORACLE BLOB field. The error occurs when trying to insert a large BLOB (JPG), but does not occur when inserting a small (<1K) picture BLOB.(JPG). Any ideas?
BTW, when using a SQL Server datasource using the same code.... everything works with no problems.
ORACLE version is 11.2.0.1
The ORACLE datasource is JDBC using Oracle's JDBC driver ojdbc6.jar v11.2.0.1 (I also have tried ojdbc5.jar v11.2.0.1; ojdbc5.jar v11.2.0.4; and ojdbc6.jar v11.2.0.4 with the same error result.)
Here is my code:
<cfset file_mime = Lcase(Right(postedXMLRoot.objname.XmlText, 3))>
<cfif file_mime EQ 'jpg'><cfset file_mime = 'jpeg'></cfif>
<cfset file_mime = 'data:image/' & file_mime & ';base64,'>
<cfset image64 = ImageReadBase64("#file_mime##postedXMLRoot.objbase64.XmlText#")>
<cfset ramfile = "ram://" & postedXMLRoot.objname.XmlText>
<cfimage action="write" source="#image64#" destination="#ramfile#" overwrite="true">
<cffile action="readbinary" file="#ramfile#" variable="image_bin">
<cffile action="delete" file="#ramfile#">
<cfquery name="InsertImage" datasource="#datasource#">
INSERT INTO test_images
image_blob
SELECT
<cfqueryparam value="#image_bin#" cfsqltype="CF_SQL_BLOB">
FROM dual
</cfquery>

Can't you use "alter index <shema.spatial_index_name> rebuild ONLINE" ? Thanks. I could switch to "rebuild ONLINE" and see if that helps. Are there any potential adverse effects going forward, e.g. significantly longer rebuild than not using the ONLINE keyword, etc? Also wondering if spatial index operations (index type = DOMAIN) obey all the typical things you'd expect with "regular" indexes, e.g. B-TREE, etc.

Error inserted into my LDAP request by Weblogic

Similar Messages

Maybe you are looking for