Error : Inspection type not properly maintained

Hi Experts,
I am trying to perform MB1B for a material and its giving me an error ...." Error : Inspection type not properly maintained" any suggestions would be appreciated...
Regards
Albert

Hi
Check the material master Quality management view where the inspection type is maintained.
Check the settings for inspection type in that material master.
Regards
Prasad

Similar Messages

Error Tax Indicator not properly maintained

I had error while doing VA01 Sales order as Tax Indicator not properly maintained. someone ha sanswer then help me to solve the same

Hi
Check the material master Quality management view where the inspection type is maintained.
Check the settings for inspection type in that material master.
Regards
Prasad

ERROR OGG-01148 programming error, data type not supported for column

I am getting following error when I put null in insert statement
2011-03-31 18:30:45 ERROR OGG-01148 programming error, data type not supported for column TXID in table advoss.tblaudittrail.
I am replicating MySQL 5.5.9 to Oracle 11g rel2 via goldengate 11

I am able to diagnose what is cuasing the problem
unsigned flag was the culprit of this error
I am able to insert null after removing unsigned flag.
thank you very much for your kind support

ESS Business Package Error: Period type not allowed for profile ESS

Hi,
We are trying to configure the business package for Employee Self Service on Enterprise Portal 6.0. We followed this SDN contribution <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a">ESS doc guide</a>
So far we have successfully deployed the business packages and followed all the configurations that were pointed out in the doc guide. Unfortunately when we try to access the Employee Self-Service portal pages (Overview, Employee Search, etc), we encounter this error:
Critical Error:
Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Period type not allowed for profile ESS, error key: RFC_ERROR_SYSTEM_FAILURE
Any ideas on how to fix this issue?
Regards,
Jojo

Hi Jojo,
Have you solved the problem? If yes can you please help me even I am facing the same error.
this is very help full to me .
Thanks and Regards,
Shilpi.

Itunes startup error itunes was not properly installed. If you wish to ....

itunes startup error
itunes was not properly installed. If you wish to import or burn cds, you need to reinstall itunes
help?

Are you actually unable to import or burn CDs? I get that error every time as well, but I don't actually have any problems.

LSMW Error - You have not fully maintained the descriptions

Hi Experts,
I was trying to Extend the materials to plant by using Direct input menthod where prog - RMDATIND.
When I execute final step i.e "Start Direct Input Program" I faced with an error " You have not fully maintained the descriptions".
I know this error with regards to Language Key and Description.
I executed Display converted data under structure BMMH5, where Language key is blank.
Kindly guide me why this language key is not captured, and also how to default the Language key as EN.
Thanks nd Regards,
Laxmi.........

LSMW u2013 Legacy System Migration Workbench
1.        Maintain object attributes
2.        Maintain source structures
3.        Maintain source fields
4.        Maintain structure relations
5.        Maintain field mapping and conversion rules
6.        Maintain fixed values, translations, user-defined routines
7.        Specify files
8.        Assign files
9.        Read data
10.     Display read data
11.     Convert data
12.     Display converted data
13.     Create batch input session
14.     Run Batch Input session

Oracle 10g: Initialization error SQL*Net not properly installed

Hello, everyone.
I have an app that uses Oracle 10g client to connect a remote Oracle 10g server.
I encountered a pop-up error saying
" Initialization error SQL*Net not properly installed. "
OracleHomeKey: SOFTWARE\ORACLE
OracleHomeDir:
Please advise a fix.
Thanks.

Maybe PL/SQL Developer is trying to use some missing registry values, or a missing ORACLE_HOME environment variable
Check the ORACLE_HOME is pointing to your 10g client path, and then try to add the following entries in the registry, making a .reg file with the following, replacing with your paths, and executing (from Windows PATH variable
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE]
"inst_loc"="C:
Program Files\\Oracle
Inventory"
"API"="D:\\oracle\\product\\10.1.0
db_1"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES]
"HOME_COUNTER"="1"
"DEFAULT_HOME"="HOME0"
"LAST_HOME"="0"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ALL_HOMES\ID0]
"NAME"="Oracle - ORACLE_HOME"
"PATH"="D:\oracle\product\10.1.0\db_1"
"NLS_LANG"="NA"
[HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\HOME0]
"ID"="0"
"ORACLE_GROUP_NAME"="Oracle - ORACLE_HOME"
"ORACLE_HOME_NAME"="ORACLE_HOME"
"ORACLE_HOME"="D:\\oracle\\product\\10.1.0\\db_1"
I hope this help
Regards,
Alfonso Vicente

Creating extensions Firefox 3.6.13: When dragging an XPI file (even pre-made), i'm always getting some error, which is not properly readable, but it says "not found" and an "ok" button.

Hi! I want to develop an extension for Firefox.
My problem is that none of the tutorials and sample which i find online work for Firefox 3.6.13 (on Mac).
When dragging an XPI file (even pre-made), i'm always getting some error, which is not properly readable, but it says "not found" and an "ok" button.
Please send me some info on how to make a "helloworld" extension installable in Firefox 3.6.13.
My email is [email protected] Thank you very much!

You can try to install the extension via File > Open File
A forum better suited for such questions is this forum:
*http://forums.mozillazine.org/viewforum.php?f=19 - mozillaZine Extension Development forum
You need to register on the MozillaZine forum site in order to post at that forum.

Error of type Not a known DirStatus - WGM throws error upon user creation

Dear MacWorld,
i run a OS-X 10.5.8 Server as OD-Master, clean install on MacPro, no migration, all updates applied, everything fresh from scratch, but my 2md installation of OS-X-server. All standard checks accomplished (Kerbreros, DNS, LDAP, ... everything fine so far).
Each time i add a user in WGM (run remotely via ARD) i receive the errormessage
"Got unexpected error
Error of type Not a known DirStatus (-1) on line 2112 of /SourceCache/WorkgroupManager/WorkgroupManager-319.2.2/Plugins/UserAccounts/Use rAdvancedPluginView.mm"
Makes me feel uncomfortable, although the resulting accounts look healthy so far. Since this is the last check before the final roll out of my OD in my organization, i'd like to get rid of it now rather then troubleshoot the OD later.
Any hints?
Cheers,
my first post here!

You seem to have your targetEntity mixed up, the @OneToMany should be B.class and @ManyToOne should be A.class.

Co Code not properly maintained

I am getting error while creating material .
"Company Code XXXX does not exist or has not been properly maintained.
I tried setting the fiscal year variant and i even created a purchase org and assigned to co code.
My enterprise structure seems to be all right but still i am getting this error.
what can be the reason and how to solve it?

hi
You company code is not initialized yet .
T code: OMSY
and maintain the year and period for your company code
Regards

Error: 'Transaction type not possible (no affiliated company specified)'

Hello,
I am trying to transfer an asset under construction to following asset class: 'low value assets' with ABUMN
It get the error message: 'Transaction type not possible (no affiliated company specified)'.
I could go to AO76 to mark the 'post to affiliated company'.
How can I check which transaction type it uses? With the transactio type group? Or something else...?
Regards,
Pamela

Hello,
actually, the problem lies with the transfer of assets under construction to low value assets with are happening in the CURRENT year, and not the previous year. AuC to LVA transfers from previous years are allowed, but not the one in the current year. Because it uses a different transfer transaction type... The transfer variant 4 (= transfer within company code) is the correct one I assume.
Regards,
Pamela

CallableStatement error: SQL command not properly ended

I am getting a strange error using CallableStatement and Oracle 7.3.4 with PL/SQL 2.3 using Classes12 JDBC driverset from Oracle. Here is the code we are using, which is almost verbatim from several Java/Oracle CallableStatement examples for Oracle 8. I am wondering what I am missing to make this work on Oracle 7 and am unable to find a reference online:
//String query = "begin PAC.PAC_WIP_WIPHEADER_PKG.GetWipNumPartList(?,?); end;";
String query = "{ call PAC.PAC_WIP_WIPHEADER_PKG.GETWIPNUMPARTLIST(?,?) } ";
CallableStatement csth = Connection.prepareCall(query);
csth.setString(1, wipNumber);
csth.setInt(2, PacCarousel.getCarouselNumber());
csth.execute();
using either the Begin or the call query (Begin commented in above code snip) is returning the following error from the JDBC driver:
java.sql.SQLException: ORA-00933: SQL command not properly ended
This identical 'begin' query works fine in TOAD or the PL/SQL console for Oracle, but just won't work using this set of JDBC drivers.
Has anyone run into this problem before or perhaps have some suggestions?
Thanks in advance

I am getting a strange error using CallableStatement and Oracle 7.3.4 with PL/SQL 2.3 using Classes12 JDBC driverset from Oracle. Here is the code we are using, which is almost verbatim from several Java/Oracle CallableStatement examples for Oracle 8. I am wondering what I am missing to make this work on Oracle 7 and am unable to find a reference online:
//String query = "begin PAC.PAC_WIP_WIPHEADER_PKG.GetWipNumPartList(?,?); end;";
String query = "{ call PAC.PAC_WIP_WIPHEADER_PKG.GETWIPNUMPARTLIST(?,?) } ";
CallableStatement csth = Connection.prepareCall(query);
csth.setString(1, wipNumber);
csth.setInt(2, PacCarousel.getCarouselNumber());
csth.execute();
using either the Begin or the call query (Begin commented in above code snip) is returning the following error from the JDBC driver:
java.sql.SQLException: ORA-00933: SQL command not properly ended
This identical 'begin' query works fine in TOAD or the PL/SQL console for Oracle, but just won't work using this set of JDBC drivers.
Has anyone run into this problem before or perhaps have some suggestions?
Thanks in advance

Error Document type "" not defined

Hi All,
I am getting below error message when i am trying to see the output of a query build on Infoset in SAP R3 system.
The Infoset is build on top of BKPF,BSEG and EKPO Tables.
Document type not defined
Message no. F5814
Diagnosis
Financial Accounting service: document type "" was not found in the document type table. There are two possible causes:
document type "" has not been set up in FI customizing
document type is supplied incorrectly from the calling application
System Response
System error.
Procedure
There are two possible measures:
set up document type "" in FI customizing
system error within the calling application - get in contact with the SAP Hotline Service.
Any input on above issue will be of great help.
Regards,
Anjali Singh

Hi Anjali,
In which system you are getting this error? Development or Production?
I think you have doc. type just in BKPF (Accounting documents headers). Check if you have any record with document type blank.
You can use t code SE16N for this issue. When you are setting filter on field "document type" (BLART) you can see the list of values. Check if there is any blank item
Regards,
Omid

While click on document shows error"document type not defined"

HI
we have folder structure in DMS like:
public folder->engineering folder->design folder->document(any)
while i am clicking on document it shows error msg document type not defined
please let me know why this error occur

Hi,
Since you are using document structure functionality, You are require to create an public folder initially and private folder for each user which is specific to user ID.
If you dont want to create private folder you can select "Select document Via in CV03N screen and select only" Selection screen " and not browser.
If the above changes is done then system will not through an error from CV03N screen"document type not defined"
reward points if useful.
Rgds,
Nayeem.

Dotfuscator CE error: External type not found System.Windows.Input.ICommand,PresentationCore

Preemptive will not support CE so I am trying here...
I have an application targeting the .NET Framework 4.0. It builds and runs fine but I cannot get it to compile in Dotfuscator CE. I am stuck.
Dotfuscator CE (v5.0.2500.0) with Visual Studio 2010 SP1. Here is the Error:
Resolving method references...
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Build Error.
The problem seems to originate from ICommand being moved from PresentationCore.dll (in NET 4.0) to System.dll (in NET 4.5). Studio handles this and compiles fine as I am targeting NET 4.0 and the references all point to
C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0\
Dotfuscator CE however does not seem to handle it correctly and I am not sure how to correct the issue. Any help would be greatly appreciated!!

Hi Perter,
Thanks for your response.
External type not found System.Windows.Input.ICommand,PresentationCore, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35.
Maybe it is related to the references in your project.
Reference:
The type 'System.Windows.Input.ICommand' exists in both 'PresentationCore.dll' and 'System.dll'
Since it is not the VS General issue, I am moving your question to the moderator forum ("Where is the forum for..?").
The owner of the forum will direct you to a right forum. Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error : Inspection type not properly maintained

Similar Messages

Maybe you are looking for