Error installation macromedia captivate

Hi, I'm new in this forum.
I have trouble when installation macromedia captivate. A message says "The Wizard was interrupted before macromedia captivate could be completely installed".
My Computer OS is Windows Server Service Pack 2.
So, How make resolve my trouble? Why this trouble happen?
Anyone help me???
Thanks before

OS compatibility might be the issue. Here is the system requirments for Captivate 1.0.
http://reviews.cnet.com/software/macromedia-captivate-v-1/4507-3513_7-31763017.html
Sreekanth

Similar Messages

  • "unable to load wingenerator.dll" error message in Captivate 4

    Has anyone run into the "unable to load wingenerator.dll" error message in Captivate 4.  I didn't see this type of error in v3...so just wondering if it is an issue with this version.  I have to save my project after every change in order to not loose my work.  I get this error and then the program crashes without saving my work.  

    Hello Cat,
    Welcome to our community. This sounds like the Windows registry has either become corrupt or has an incorrect permission. If you are using Windows XP then you might want to take a look at the following blog post
    Adobe Captivate 4 Installation Issues on Microsoft XP 
    If you are using Windows Vista then I would suggest that you contact Adobe using the Adobe Captivate Feature Request/Bug Report Form
    Adobe Captivate Feature Request/Bug Report Form 
    Regards - Mark

  • I get a 213.10 error after installing Captivate

    Why do I get a 213.10 error after installing Captivate 7 on a Windows 7 32 bit workstation?

    These ones are tricky. But the following instructions are worth a try.
    First do a complete uninstall of iTunes and related components (but don't reinstall just yet), as per the following document:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    a. Launch regedit (Start >> Search Programs and Files >> type Regedit and open the regedit that comes up.)
    b. Access the following Location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData \S-1-5-18\Components
    c. Perform the following actions
    i. Right Click on Components Folder
    ii. Select Permissions
    iii. Select Full Control and Read Permissions options
    iv. Select Advanced Button
    v. Select Owner Tab
    vi. Select to Change Owner to the Administrators
    vii. Check the option “Replace owner on subcontainers and objects”
    viii. Select OK when prompted that it may not change all.
    ix. Select Apply
    x. Select Apply again
    xi. Exit the Registry Editor
    Now try reinstalling iTunes again. Does it go in properly this time?

  • ERROR MESSAGE "MACROMEDIA PROJECTOR HAS STOPPED WORKING"

    I am using Windows Vista, and can no longer play any of my
    games. Was able to play before now I get this stupid
    error message: "Macromedia Projector has stopped working." I
    have tried redownloading the games again, tried redownloading the
    Flash and shockwave players, still nothing. HELP!

    I suddenly started getting the same error message and was reaching my wits end in trying to find a solution.
    This may sound bizarre, and you may not have the same situation as I found, but check your system/Windows date setting.
    Somehow, the year on my system had become 2096. I corrected it, and bingo! PSE 8 Editor works again.

  • A Fatal Error Has Occured - Captivate 6

    Hi there, I have seen some threads on different error issues of Captivate, but mine is worse.
    Since the Captivate 4 installed in my office PC, it never ran smooth. Our IT purchased version 6 for PC with hope to improve performance. But since day one, it has never worked.
    First, it refused to boot, because the folder 'My Adobe Captivate Projects' was set to be installed in 'user's documents' folder, as by default. There wasn't much space in that folder because our company PC was set to limit the users' personal space, and I wasn't able to ask it to install in another folder (such as C drive, which would solve my problem). This folder wasn't installed at first. My Captivate opens then quits instantly. Our IT came and manually copied the 'My Adobe Captivate Projects\Layouts' folder from another computer which has it installed. Now I have one file named White.cptm in the folder named 'My Adobe Captivate Projects\Layouts\6_0\en_US'. That's the only Captivate file I have under Documents.
    After adding the 'My Adobe Captivate Projects' folder, it can be opened. But as soon as I set to 'capture', it quits with fatal error message within 6 seconds into capturing. The temp folder, the export folder and cache all set to D drive (local drive). I can not open someone else's project files, I can not record, or any other operations.
    Our IT came in again, we did a major clean up of all temp files, cache, etc... Still no luck, same fatal error. The message look like this (classical, like many users')
    Could anyone tell me where has gone wrong? How can I ask Captivate to NOT READ FROM MY DOCUMENT FOLDER, instead I move everything to C drive (where rest of Captivate programme files are located)? Or there is a problem somewhere else?
    I would be very greatful if someone can give a hint...!
    OS: Windows 7 Enterprise. Intel Celeron 2.5GHz. Ram 8GB.

    Thanks very much for your speedy answer! I tried hard to change it without any result, so I expected it could not be done...
    Since I cleaned up my personal space just for Captivate, I will not store anything in my document, to make space. Now technically there is enough space to work with.
    I have already set my preference settings to export/save/cache/whatsoever into D drive. It was the first tihng I attempted. I think the problem lays deeper though.
    Now when I open the programe, it refuses to show me more than the welcome screen.
    I can click 'blank project', then click on one of the default values, then OK. Nothing happens, I am back at welcome screen.
    The only button actually can perform is the capture (software stimulation). If I start capture, it will show me fatal error instantly.
    Everytime I open it, I would get stuck in one of the steps, today here, tomorrow there...I dont think I can have IT upgraded it very soon. So I try to solve this problem in the meantime... I will ask them to make it Admin for me, and see how it goes.
    Do you know if there could be other things I could try?
    Thanks a million.

  • Upgrade macromedia captivate 1 to captivate 5

    hello,
    I have version macromedia captivate 1 and I want to upgrade to captivate 5.
    Is it possible?
    Thank you.

    Hi there
    I believe upgrading the software will occur fine. Where you will have issues is upgrading any projects you created in version 1 to work with version 5. I don't believe version 5 will understand the version 1 format. So you will likely need to find someone with a copy of version 2, 3 or 4 and upgrade any projects to one of those versions. THEN you can upgrade the project to version 5 format.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • CR Dev XI Installation Error - "Installation Suspended, Incomplete"

    Post Author: Phoenix17
    CA Forum: Deployment
    I am attempting to do an unattended installation of CR Dev XI using the installation parameters defined in the user documentation. What I am running into is a consistant error message "Crystal Reports Setup Error" "Installation Suspended, Incomplete ".The install runs 99% of the way and when the error occurs the install aborts and the shortcuts are not created. When attempting to launch the application it displays an error "Couldn't find Keycode.dll".
    If I run the same installation script a second time on the same machine - the installation kicks into repair mode and completes the install.
    I was able to trap the MSI exit code and the MSIEXEC returns a "0" - which indicates that MSIEXEC installed the code in total with no MSI errors detectable.
    The script string is the following:
    Setup.exe" CLIENTLANGUAGE=EN REBOOT=ReallySuppress /qb! PIDKEY=XXXXX-XXXXXXX-XXXXXX-XXXX INSTALLDIR="C:\Program Files\Business Objects\Crystal Reports Developer 11" COMMONDIR="C:\Program Files\Common Files\Business Objects\3.0" ADDLOCAL=ALL
    Note the the PID has been X'ed out   I have tried a variety of MSI switches ( /qr , /qn, etc ... ) and the results are the same.
    How can I get this app to install cleanly on the first pass? Is there an updated install? I am trying to install Crystal Rpt Dev 11 - Version 11.0.0.1282.
    Any insight is greatly appreciated...
    Thanks - Phoenix

    Post Author: mteegarden
    CA Forum: Deployment
    I'm having a similar problem when trying to install CR Pro 11.5.  Here's the string that we have been using.
    start /high setup.exe ADDLOCAL=ALL EXCLUDEDOTNETFILES=1 EXCLUDEJAVAFILES=1 EXCLUDERDCFILES=1 CLIENTLANGUAGE=EN REBOOT=ReallySuppress PIDKEY=XXXXX-XXXXXXX-XXXXXX-XXXX INSTALLDIR="C:\Program Files\Business Objects\Crystal Reports 11.5" /le c:\temp\cr_11.log /qn
    The last part of the string is for logging and we are consistantly seeing an error at the end of the installation returning an error of 1603 when we set an ALLUSERS=1 and a 1604 when we use ALLUSERS=2.
    The results are the same as yours.  If I interrupt the installation after the error, but before it is completely backed out, and reboot the machine, the installation picks up and completes successfully.  The problem area seems to be in the adding of the shortcuts to either the All Users desktop or the specific users desktop.
    We are at a point where we are going to open a support call in order to get this resolved, but it sounds like a bug in their installer.

  • Should I buy Adobe and Macromedia Captivate?

    I am looking to use Capitivate as a teaching aid for
    software. Please can I have some advice about the difference
    between Adobe and Macormedia Captivate. Which is the best to buy?
    Cheers
    ML

    There is no Macromedia Captivate. Captivate was a Macromedia
    product . . .
    Adobe bought Macromedia (the whole company) after Captivate
    version 1 was released, then created version 2 branded for Adobe.
    So the long and short of it is that if you have version 1, you have
    Macromedia Captivate, and if you have version 2, you have Adobe
    Captivate.
    Hope this helps ...

  • 502 error "Installation Failed  Download error.

    I keep getting a 502 error "Installation Failed  Download error. Unable to reach Adobe Servers." Managed after a number of tries to get Photoshop and Illustrator 2014 to download but still getting this message with the other 2014 downloads I want to make.

    All downloaded successfully after a while.
    Cannot think how it could have been firewall related when the error message would appear after the download had started and after a number of tries the software would download? As my message states Photoshop and Illustrator came down after number of tries the rest took much longer.

  • ERROR INSTALLATION PHOTOSHOP CS5 "ERROR CODE: 20"

    ERROR INSTALLATION PHOTOSHOP CS5 "ERROR CODE: 20"

    Exit Code: 20 - install source path does not exist
    Install source files are missing.
    Reextract or copy the contents of the installer.
    See: Installation, launch log errors | CS5, CS5.5, CS6, CCM
    http://helpx.adobe.com/x-productkb/global/installation-launch-log-errors-creative.html

  • Can't install iCloud control panel on vista? I keep getting the error "Installer encountered errors before control panel could be installed" Knowing what errors and where to start would help?!

    Can't install iCloud control panel on vista? I keep getting the error "Installer encountered errors before control panel could be installed" Knowing what errors and where to start would help?!

    Try this: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

  • EndInstall() returned an error,installation(propably) failed

    Hi friends,
             When I am going install addon one error "EndInstall() returned an error,installation(propably) failed" is coming.
    can you guide me.
    Regards,
    Silambu

    Hi friends,
                         I solved this problem. I was searching exe file in backend (C:\Program Files\SAP\SAP Business One\AddOns).
    There is no addon files.Then I did following procedure. Now It is working.
    solution:
                    1) Uninstall (Remove) previous addons.
                    2) Install same addon once again.
    Thanks,
    Silambu

  • Error installation

    Hello guys,
    I have question about my error installation with Mac Air. After I use Macbook Air software Reinstall Drive and proceeding, summary came up that "The installation failed" and ask me to contact the software manufacturer for assistance then I tried to contact iStudio in Bangkok, Thailand. He couldn't check for me what's problem (I didn't bring my notebook) but he gave me iLife'11 install DVD to my falshdrive so I came back to try again with new installer but still couldn't work. The summary pop up as same as above text. What should I suppose to do to install my iPhoto and stuff from iLife to ma MacBook Air? Also if my software reinstall drive was broken could be possible to change a new one?
    Look forward to hearing from you too soon
    Patthanant K.

    Hi Lukelt,
    Please refer the KB : http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html

  • Macromedia Captivate Registration

    Ramesh from adobe tech support suggested I ask my question here.  The registration process for my verison of captivate no longer works.  Is there a way to register this product so I can use it longer than 30 days?  I have the registration number.

    Perhaps by posting here one of the Adobe Captivate development team will see this and be able to offer a suggestion. If you have Macromedia Captivate, that's version 1 of the software prior to Adobe obtaining it. That would be circa 2007? I'd be surprised if there is any way to "activate".
    You really should consider an upgrade if you are serious about using Captivate.
    Cheers... Rick

  • Macromedia Captivate for OS X

    I am a pc convert who used to use Macromedia Captivate to create how to videos on different software systems... Now I have converted almost all to OS X but I need software which I can use to create how to's like Captivate does. Anyone know of similar software for OS X?

    Thanks for your reply.  I don't use itunes so that couldn't be it.  Reading about Little Snitch and Hands Off, however,  educated me about the data harvesting in many apps and that when buying from the AppStore one will more likely get Apps with benign data harvesting.

Maybe you are looking for

  • Error while making a graph in excel

    I can create an excel file + worksheet + inserting data. But when i try to make a graph i get the error: Error accessing the OLE registry. in Excel Import Module.vi->Excel Insert Graph.vi->Excel Easy Graph.vi->excelreport.vi i searched the forum but

  • Telnet port 25

    I have users that want to access GW with different clients than the GW client (smart phone, Thunderbird etc). They can POP the email from the server to their client, but cannot send. In troubleshooting, I'm trying to telent to port 25 on the public I

  • Modifying the selection screen in an LDB

    Hello Experts,    I have a requirement wherein, i need to copy a standard report which used an LDB 'ERM', into a z report and modify its selection screen(Add a check box). Is this possible? If yes, can you tell me how? Thanks in advance, Regards, Rav

  • Batch script to monitor tbs

    Hi guys. On windows machine, I do have cron jobs that monitor tablespace usage and when a tbs reaches a machine, an alert is sent. Now, I do have other dbs runing on windows and would like to do the same. The problem is that am not use to windows and

  • Concurrent LRUCache?

    Hi, I'd like to know if you know of an LRU (least recently used) cache that would use java.util.concurrent. I'm currently using the following implementation that is based on java.util.LinkedHashMap. Do you know if there is an implementation based on