Error Installing a TREX Instance Only 7.0 on a Windows 2003 Server (64 bit)

Hello,
during the installation of a TREX 7.0 Instance on a Windows 2003 (64 bit) Server following error occured:
"SAP System XXX is a ABAP or double stack system. Cannot switch this to a java standalone system."
The error occured after/during the step SAP System > OS User Passwords
On the server runs a CRM 7.0 EH1 double stack system XXX.
Also there runs a TREX 6.1 which should be upgraded to 7.1.
Could anybody help me?
Regards,
Thomas

Hi Michael,
we're running KW 7.0 on w2k3 without any Problems.
The KW 7.0 System consists of a WebAS 6.40(ABAP+JAVA)and a SAP Content Server. Both components are supported on w2k3(PAM).
René

Similar Messages

Trex can't be updated to higher levels on windows 2003 server 64 bit

Hi gurus,
We have a portal system (EP 7.0 SP18) and a Trex 7.0 server which are
working on windows 2003 server 64 bit on the same server.
After upgrading our portal system from sp15 to sp18, we can not see
indexes on Index Administration screen. When we tried to create the
indexes from the beginning, we faced the message "An index with the samename already exists."
We thought that the level of the Trex server(25) is low which may cause
this problem and decided to update the Trex server to level 46. We
downloaded "TREX70_46-20001842.SAR TREX 7.0 REV 46" from
service.sap.com and tried to update Trex server according to
NW70_SPSTACK_GUIDE_SPS18.pdf.During the installation a warning
message "You started an installation of sofware for platform
i386, but SAPinst is running on platform AMD64" was given. When we
continued the installation, an error message
was shown in a message box."Running msiexec.exe failed with return code
1603:Fatal error during installation. Commandline was
msiexec.exe/norestart/L sapmmcx86u.log/i sapmmcx86u.msi/qn" I searched
the sapmmcx86u.log and the error message says that this installation
package is not for windows
2003 server 64 bit.
"This installation does not support 64 Bit Windows Operating systems.
Please use the corresponding 64 Bit installation package.
Action ended 8:26:08: LaunchConditions. Return value 3.
Action ended 8:26:08: INSTALL. Return value 3.
MSI (s) (10:84) [08:26:08:578]: Product: SAP MMC SnapIn -- Installation
failed."
We searched in OSS notes and found the note "Note 1021003 - TREX 7.00 -
Update Windows 2003 64-Bit installed from DVD"
.We did the things in the note but unfortunately nothing changed.
We tried the install revision 45,44 etc but we got the same warning and
error messages.
Any suggestions?
Edited by: Tolga Akinci on Apr 30, 2009 3:08 PM

Hi Tolga,
You face with this error, because of Trex installation package is trying to install native i386 redistributables (vcredist_x86.msi) during the process. In order to patch Trex system on x64 architecture, follow the instructions, below;
1) Start sapinst, under your <TREX_PATCH> path
2) Ignore AMD64 warning popup
3) When popup appears on the "1603:Fatal error during installation." error, change temp folders on both environment variables, on my computer
4) Download and execute "vcredist_x64.exe" then run installer
5) After respective installation click on "Retry" button on error popup
At the end of this operation, your Trex patch will be succeeded. Please do not forget to undo your temp directory settings, on your Trex host. I hope that it is clarify your question.
Best regards,
Orkun Gedik
Senior SAP Development And Basis Consultant

Installing problem on Windows 2003 Server 64 bit

Dear All,
I'am trying to install XE onto a Windows 2003 Server 64 bit.. The installation process ends without any errors but the database itself seems not to start.
I tried several hints that have been mentioned here within the forum. But none of them worked. While experimenting I saw that there is not a single registry entry of Oracle within HKEY_LOCAL_MASCHINE\Software .
Is there a possiblity to set those needed registry entries manually? Is there a script for that purpose?
Thank you very much for your help!
Regards
Matthias

Hi,
thank you for your reply. As 32bit programs should run under Windows 64bit I thought the XE should run under 64bit, too.
The installation of XE itself seems to finish without any errors. But within the log files it can be read that the database has not started up due to a out of memory problem. This causes many log entries within all other logfiles as no database could be created.
The out of memory problem might be the same as within Advice on running XE on a small virtual Linux host ("Virtuozzo") because I am using a virtual windows 2003 server with "Virtuozzo", too.
At this time I am on discussing the issue with the provider. Maybe I will get a dedicated server with Windows Server 2003 64bit. Hopefully the XE could be installed on the 64bit Windows Server because 32bit dedicated servers are rare.
Best regards
Matthias

Error in installation database in Windows 2003 server 64 bits

Hi, I have a problem. I am trying to install a database Oracle Enterprise Edition 9.2.6 in a machine that has Windows 2003 Server 64 bits
. On having finished the installation and begin the Database Configuration Assistant appears the error ora-12546 TNS permission denied. In the file listener.log
the following messages appear:
TNS-12500: TNS:listener failed to start a dedicated server process
TNS-12546: TNS:permission denied
TNS-12560: TNS:protocol adapter error
TNS-00516: Permission denied
32-bit Windows Error: 5: Input/output error
I see the note 722966 and my procesador is EM64T
I install in local mode, not remote and using Administrator user.
Help me, please!

Hello,
There is a note in SAP that indicates that EMT64/x64 is not compatible with Oracle 9.2 (nota 12546) There is Oracle's FAQ that indicates Oracle's versions and Windows that he(she) supports EMT64.
http://www.oracle.com/technology/tech/windows/faq.html#x86-64
Since you can see it(he,she) indicates that Oracle 9.2 is supported in Windows 32 bits with technology EMT64
And that alone the version 10g 2 be reread it(he,she) is compatible with Windows 2003 SEVER 64 bits with technology EMT64
I hope that this costs(suits) us to solve our problems
A greeting

EP 6.0 on Oracle 9i 32 bit for Windows 2003 server x86_64 bit env Install

We are facing issues while performing instalations of EPortal 6.0 on Windows 2003 enterprise edition server(X64 version) on AMD 64 bit processor.We have installed 32 bit Oracle software alongwith 32 bit SAP kernel 640 dumps
We had to install oracle 9.2.0.5 32 bit ,since there is no oracle
realease for oracle 9i 64 bit ,on OS windows 2003 server X_86 64 bit,after doing this when we go ahead kenel 32 bit, we faced error during database creation phase of the NW java installation.The error logs are
as follows,
ERROR 2008-04-05 23:09:27
CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message:
ORA-12546: TNS:permission denied
plz respond asap

hi sm,
this seems to be an issue with the rights of the user and the DB install. check is the TNS is up and running and that the SIDADM has fill access to it. Also , have you checked the latest PAM. why are you trying to implement EP6 right now? I would suggest to go for EP7.0
regards,
Shantanu

Oracle 10g install on Windows 2003 Server 32-bit

As far as I can tell there doesn't appear to be an Oracle10g download for 10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1 for Windows then apply the patch to bring it up to 10.2.0.4. Am I seeing this correctly or am I missing something?
Thanks!

>
As far as I can tell there doesn't appear to be an Oracle10g download for
10.2.0.4 for Windows 2003 Server. It looks like you have to download 10.2.0.1
for Windows then apply the patch to bring it up to 10.2.0.4.
Am I seeing this correctly or am I missing something?
>
Indeed you are; your eyes are definitely not lying to you. 10.2.0.4 is a patchset which can only be applied to an already existing Oracle Home.
You might want to try and understand a little bit more about what the 10.2.0.4 means by accessing the links below.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14238/intro.htm#sthref14
http://download.oracle.com/docs/cd/B19306_01/server.102/b14231/dba.htm#sthref94
http://wiki.oracle.com/page/Patchset+Number+Overview
Perhaps you also ought to go through this {message:id=3251402}
Regards,
Phiri

Error=2 in jre1.6.0_07 when calling cmd /c -- Windows 2003 server 5.2

Must be very simple. Although, I do not where else to check.
A java application allows opening the OS shell and executing programs. For Windows
(without further details) a "cmd /c" prefix is recomended in the config file. None
for Linux.
The application runs the shell from a path relative to its configurations file,
for which I have defined "../scripts".
Thus a .wsf script located at MyAppPath\scripts can be executed as "Cscript //NoLogo MyScript.wsf". It works OK under XP Profesional, Version 2002, Service Pack3, jre1.6.0_07, JAVA_HOME defined. The application log reports a proper application start up using Java VM 10.0b-23. and execute the shell as many times as called without any problem.
The applications works also fine for every aspect on Windows 2003 server 5.2, except for calling the os Shell. The following error is displayed:
Cannot run program "cmd /c Cscript //NoLogo Myscript.wsf" (in directory C:\MyAppPath\script"): CreateProcess error=2 the system can not find the file specified.
Of course, the file "Myscript.wsf" is there...
In both cases (XP and 2003), CompSpec is set to %SystemRoot%\system32\cmd.exe and PATHEXT inlcudes ".WSF".
Any help will be most appreciated.

I have no experience with cscript, but by typing cscript in a command prompt i get:
Microsoft (R) Windows Script Host Version 5.7
Copyright (C) Microsoft Corporation. All rights reserved.
Usage: CScript scriptname.extension [option...] [arguments...]
Options:
//B         Batch mode: Suppresses script errors and prompts from displaying
//D         Enable Active Debugging
//E:engine Use engine for executing script
//H:CScript Changes the default script host to CScript.exe
//H:WScript Changes the default script host to WScript.exe (default)
//I         Interactive mode (default, opposite of //B)
//Job:xxxx Execute a WSF job
//Logo      Display logo (default)
//Nologo    Prevent logo display: No banner will be shown at execution time
//S         Save current command line options for this user
//T:nn      Time out in seconds: Maximum time a script is permitted to run
//X         Execute script in debugger
//U         Use Unicode for redirected I/O from the consoleDoesn't this mean that the script file name should come before the option (//Nologo)?
I run XP SP 3.

HP Officejet Pro 8610 will not install on Windows 2003 Server 32 bit.

When installing the 8610 with the disk, at the end it states and error occurred during the installation of the device. The specified module could not be found.
When I install using the downloaded drivers, after the files extract and the program connects to the printer, when I hit Continue a screen pops up and states the operating system of this computer is not supported... even though the 2003 Windows server is on the list. Is there anything I can do to install the drivers? All I need is basic printing . I'm about ready to pack it up and return it... which means the other printers will have to be returned because I like them all to be the same.
Please help.

Hi,
Follow the steps below to install the software using an MSIEXEC command, the installation should not be done using the installer as any clieant operating system.
The steps below are also applicable for installing the 8610 on a server OS:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03351547&lc=en&product=5367608&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can't install ITunes on Windows 2003 server (WHS box)

Hi,
I can't install the latest ITunes because it incorrectly mistakes my Windows 2003 server as Windows XP. So after search I find that I can change the MSI files as according to this thread: http://discussions.apple.com/thread.jspa?threadID=2154140.
This seems to work for all MSI file sin the ITunes etup exe except for this: AppleMobileDeviceSupport.msi. If I change the MSI LaunchConditions it gives my error 2229 no matter what.
So I'm stuck. Should I call Apple next?

I can't help you with the error you get, but just to clarify while iTunes isn't "officially" supported for use on Server 2003, it does work. Sort of. iTunes 8 could be installed by editing the MSI, iTunes 9 however while this method is still required you'll run into a problem with iPodService.exe crashing, and iTunes refuses to finish the install until that service is up and running.
There are a few topics on here that detail what you can do to get around this problem. I believe currently the only tried and tested method is to use the iPodService.exe from iTunes 8, doing a swap trick when the iTunes 9 service crash occurs so that you can at least get the application to install.
I can't be bothered to go to the trouble though. I'm interested in seeing if Apple will silently stop with the BS and just fix the installer's version mismatch errors (easily done), and fix iPodService.exe. The reason why the service crashes, according to what I've read, is because it seemingly misidentifies Server 2003 and similar OS's as Vista or Windows 7, and then begins calling functions for those OSs from ntdll.dll - which causes the crash.
As for your error, presumably that is with Orca. All I could find relating to the errors is something about transforming the MSI and language translations. It could also be because of an older version of Orca. Perhaps try and re-download iTunes, and extract the MSI packages again. But you should only need to edit the LaunchCondition for AppleMobileDevice.msi - and you don't need to delete the table either, you can simply change the number in NTVersion from 501 to 502, save the package and it'll all work. It did for me when I first tried it anyway.

Installing AS 10g (10.1.2) on Windows 2003 Server

I have problem installing AS 10g (10.1.2.0.0) on Windows 2003 Server. Installation seems to be ok, but when I tried (on server) to go into Enterprise Manager (EM), I wasn't asked for password, only blank page was shown. So I tried enter EM on workstation (XP, SP2) - succesfully. All seemed OK, until I tried deploy some application from ear file. I waited a long time, but nothing happened. On server I see, that nothing at all is being uploaded into applications directory. I tried all that again on AS installed on XP workstation - without any problems, so problem will probably be on 2003 server. Do you have any idea where? Thanks.

I solved one thing - running Enterprise Manager on server is now possible after I changed security level in Internet Explorer. Now I can deploy applications from server, whether the .ear file is on server or shared from workstation. I still have problems with deploy from workstation (though I was several times succesfull). After browsing to .ear file and clicking on Continue button on first (out of 3) page, the IE waits very long time (many minutes) to next page. Once on next page, I am able to finish it all OK quite quickly.

Installing Oracle 10.1.0.2.0 (32 bit) on windows 2003 server

Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PM

user11153253 wrote:
Hi all,
During installation of Oracle 10.1.0.2.0 (32 bit) on windows 2003 server 64 bit standard edition there is failure in Oracle Net configuration , oracle Data Base configuration Assistance.
and i saw the log file of the installtion but its very complex and saying some Unexpected error occured and showing some coding. any suggestions about this. thanks in advance.
BEST REGARDS
Edited by: user11153253 on Jan 10, 2011 11:57 PMYes, I would suggest you actually show us the error message. All of our crystal balls are out for repair at this time.
"My car won't start. It makes funny sounds when I try. I looked under the hood and saw a lot of complex machinery. Any suggestions on how to start my car?"

Error Installing patch 6272725 on Windows 2003 server

Hi all,
I am trying to install the RUP3 patch on Windows 2003 server. I am getting the following error when installing patch 6272715 which is required to be installed before installing patch 6141000. If i continue installing patch 6141000 after ignoring this error, i get same error during installation of patch 6141000. Please can any one suggest me what i should do to get rid this error.
AD utilities can support a maximum of 999 workers. Your
current database configuration supports a maximum of 83 workers.
Oracle recommends that you use between 2 and 4 workers.
Enter the number of parallel workers [2] :
AutoPatch will run in parallel mode.
Did not need to apply new applterr.txt.
Applying new applprod.txt (if any)...
Did not need to apply new applprod.txt.
Performing version checking for driver files...
Log and Info File sync point:
Mon Nov 26 2007 12:33:27
AutoPatch found some files which it will not apply.
These files are listed in the AutoPatch informational message file.
Copying driver files into installation area...
No driver files were selected for copying.
Skipping...
ForceCopy driver files into installation area for Specified driver
since no such action is present for this driver file
Screening out files not valid for this installation...
Determining valid on-site files...
Extracting object modules from product libraries...
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
aiosp2() Error: failure in usdspn()
Contents of error buffer are:
"usdsop cannot create a new process
Cause: usdsop encountered an error creating a new process. [Reason].
Action: Check that your system had enough resources to start a new process. Cont
act your system administrator to obtain more resou (RE"
An error occurred while extracting files from library.
Continue as if it were successful [No] :
--- Thank You.

Sir,
I am posting the output as told by you.
G:\>which ls
ls: Command not found.
G:\>c:
C:\>ls
'ls' is not recognized as an internal or external command,
operable program or batch file.
C:\>cd e:\cygwin\bin
C:\>e:
E:\cygwin\bin>which ls
ls: Command not found.
E:\cygwin\bin>
I am also posting the output of adadmin utility in which i tried ti relink FND programs
Enter list of products to link ('all' for all products) [all] :
Generate specific executables for each selected product [No] ?
AD Administration can relink your Oracle Applications programs with debug
information. Oracle recommends that you do not relink your programs
with debug information unless asked to do so by Oracle Support Services.
Relink with debug information [No] ?
Relinking selected modules in Application Object Library.
setEnvAdrelink: Error: Cannot open registry key:
SOFTWARE\ORACLE
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 33: a
wk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 203:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 534:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 538:
tr: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 548:
awk: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 573:
cat: command not found
/cygdrive/g/ora12/VIS/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh: line 575:
rm: command not found
Usage: adrelink force=y [<optional args>] <targets>
or: adrelink force=y [<optional args>] filelist=<file>
where <targets> = { <product module> [<product module>] ... }
and <product module> = "<product> <module name>"
- <product> should be in lower case
- <module name> should exactly match the executable name
Valid <optional args> are:
envfile=adsetenv.sh
Used only by the 'adsetup' script
link_debug=y
Will we link executables with debug or not? Default is 'n'
backup_mode=none
Which executables will we back up when linking with force=y?
Default is 'file'. Meanings are:
- none: do not back up any executables
- all : back up all executables
- file: do what $APPL_TOP/admin/adlinkbk.txt says to do
Type 'adrelink examples' to see some examples of running adrelink.
An error occurred while relinking application programs.
Continue as if it were successful [No] :
It is clear that there is some problem with Cygwin. I have renamed the following executabes after the cygwin installation.
gcc to cc
egrep to grep
gawk to awk
gnumake to make
i have also copied which.exe to "Windows\system32" directory from "cygwin\bin" folder and
Copy LINK.exe to "Windows\system32" directory from "VC98" directory.
Please tell me if there is something wrong with Cygwin installation.

After installing Crystal Reports XI on Windows 2003 server with one error..

After installing Crystal Reports XI on Windows 2003 server with one error... REGSVR sapldap.dll error. I had to regsvr it manually. Crystal still didn't run. Found out that Crystal Reports XI will not run until you change DEP to protect only windows program and services. Thanks.

Thank you for sharing your finding. Very much appreciated.
The DEP is a known issue and it is documented in [this|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] note.
Crystal Reports XI was not compiled with the nx flag as it released before Windows XP Service Pack 2 or Windows 2003 Service Pack 1.
As for the sapldap.dll. I'm not sure where this is coming from. I do not see this dll on my install, however it does come with the SAP portal integration kit. So I'm not sure if that is flying around somewhere on that server(?)
Ludek

How to Install 64-bit "Generic / Text Only" print driver on a 32-bit Windows 2003 Server?

Hi All,
In a nutshell, I need to Install the 64-bit Generic / Text Only print driver on a 32-bit Windows 2003 Server’s “Generic / Text Only 32-bit print queue.
The problem is that there is no Driver-Disk to get the drivers. I’ve been able to isolate 14 files related to the 64 bit drivers from a Windows 7 x64 computer and copy them to a temp folder on the Windows 2003 x32 server. When I try to add the 64 bit driver
to the Windows 2003 x32 server, it wants a *.inf file, which I don’t have and can’t find.
Because Microsoft will no longer support Windows XP, my client is replacing all of their Point-of-Sale Windows XP x32 systems with Windows 7 x64. They use Terminal Services (Remote Desktop) to connect to a Windows 2003 x32 server to use the POS system. The
POS software redirects LPT1 back to the local Generic / Text Only printer. This works great for XP x32.
When we use the Terminal Services POS software on the new Windows 7 x64 system, none of the labels print out because it’s redirected in 32-bit back to the local Windows 7 x64 Generic / Text Only 64-bit printer.
This will be a huge issue for me if I can’t get this to work.
Thanks in advance for any suggestions and help! -Rob

those may be helpful...
http://social.technet.microsoft.com/Forums/en-US/a129f49a-0216-41f0-b190-3efb46fbb8ac/generic-text-only-driver-on-windows-2008-server-r2?forum=winserverprint
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/how-to-add-64-bit-print-drivers-on-32-bit-windows-server-2003-or-windows-server-2008-print-server.aspx
Best,
Howtodo

Install 10.2 Grid Control on Windows 2003 Server - Always erorr on Agent

I have a Windows 2003 Server in a Domain and have tried to install several times OEM Grid Control 10g (B30800-01), but every time the last step (Agent Configuration Assistant) prints "Failed" on the OUI-Screen. I checked the log on the directory "cfgtoollogs\cfgfw", but for a beginner it is a little bit difficult to find the key for the error. Somoebody has a minute left to look at it, please? (It's only the last part of the file CfmLogger). Everything else worked fine for the Installation.
Thank's a lot.
INFO: oracle.sysman.top.oms:The plug-in OMS Configuration has successfully been performed
INFO: CfwProgressMonitor:actionProgress:About to perform Action=configuration Status=is running with ActionStep=2 stepIndex=2 microStep=0
INFO: oracle.sysman.top.agent:About to execute plug-in Agent Configuration Assistant
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant is running
INFO: oracle.sysman.top.agent:Internal PlugIn Class: oracle.sysman.emcp.agent.AgentPlugIn
INFO: oracle.sysman.top.agent:Classpath = D:\OracleHomes\agent10g\jlib\srvm.jar;D:\OracleHomes\agent10g\jlib\srvmhas.jar;D:\OracleHomes\agent10g\oui\jlib\srvm.jar;D:\OracleHomes\agent10g\sysman\jlib\agentPlug.jar;D:\OracleHomes\agent10g\jlib\emConfigInstall.jar;D:\OracleHomes\agent10g\sysman\jlib\emagentSDK.jar
INFO: Error reading file D:\OracleHomes\db10g\sysman\config\emd.properties
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:AgentPortHandler for D:\OracleHomes\agent10g and hosts=ora1.ramseier.local returned Port to Use=3872
INFO: oracle.sysman.top.agent:Configuring the agent
INFO: oracle.sysman.top.agent:Performing free port detection on host=ora1.ramseier.local
INFO: oracle.sysman.top.agent:AgentPlugIn:perform: DiscoverTargets for racMode=false and request doDiscovery=true, chainedInstall=true,omsOnly=false, iasName=EnterpriseManager0.ora1.ramseier.local, CRShome=, dbName=emrep.ramseier.local, seedInstall=true, connectDescriptor=(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=ORA1)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=emrep.ramseier.local)))
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Securing Agent with agentSecure=true for non RAC
INFO: oracle.sysman.top.agent:Securing the agent
INFO: oracle.sysman.top.agent:Securing the agent...
INFO: oracle.sysman.top.agent:Executing Command: cmd /c D:\OracleHomes\agent10g\bin\emctl.bat secure agent
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:AgentPlugIn:perform:Configuring Agent...
INFO: oracle.sysman.top.agent:Performing targets discovery and agent configuration
INFO: oracle.sysman.top.agent:DiscoverTargets:constructor with params: eRoot=D:\OracleHomes\agent10g,hname=ora1.ramseier.local...
INFO: oracle.sysman.top.agent:configureAgent:discovery on non RAC:
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\host.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="host" NAME="ora1.ramseier.local" >
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outhost file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outhost to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracledb.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_database" NAME="emrep.ramseier.local" >
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="UserName" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="ora1.ramseier.local" />
<Property NAME="Port" VALUE="1521" />
<Property NAME="SID" VALUE="EMREP"/>
<Property NAME="ServiceName" VALUE="emrep.ramseier.local"/>
</Target>
<Target TYPE="oracle_listener" NAME="LISTENER_ora1.ramseier.local" >
<Property NAME="ListenerOraDir" VALUE="D:\OracleHomes\db10g\network\admin" />
<Property NAME="LsnrName" VALUE="LISTENER" />
<Property NAME="Machine" VALUE="ora1.ramseier.local" />
<Property NAME="OracleHome" VALUE="D:\OracleHomes\db10g" />
<Property NAME="Port" VALUE="1521" />
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outdb file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outdb to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:discoverTargets:executing addPwdinDBTarget for seedInstall=true
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\ocs_mailstore_discovery.pl D:\OracleHomes\agent10g ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outocs file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outocs to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_ias.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.emd.conf).
log4j:ERROR Please initialize the log4j system properly.
STDOUT=
<Targets>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_home" DISPLAY_NAME="home" VERSION="1.3">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="9.0.4"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_apache" NAME="EnterpriseManager0.ora1.ramseier.local_HTTP Server" DISPLAY_NAME="HTTP_Server" VERSION="2.0">
<Property NAME="version" VALUE="10.1.2"/>
<Property NAME="HTTPPort" VALUE="80"/>
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_webcache" NAME="EnterpriseManager0.ora1.ramseier.local_Web Cache" DISPLAY_NAME="Web Cache">
<Property NAME="HTTPProtocol" VALUE="http"/>
<Property NAME="HTTPMachine" VALUE="localhost"/>
<Property NAME="HTTPMachineForAdmin" VALUE="ora1.ramseier.local"/>
<Property NAME="HTTPPath" VALUE="/"/>
<Property NAME="HTTPQuery" VALUE=""/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="MonitorPort" VALUE="9402"/>
<Property NAME="AdminPort" VALUE="9400"/>
<Property NAME="logFileName" VALUE="access_log"/>
<Property NAME="logFileDir" VALUE="D:\OracleHomes\oms10g\webcache\logs"/>
<Property NAME="version" VALUE="10.1.2.1.0"/>
<Property NAME="IASInternalName" VALUE="WebCache"/>
<Property NAME="authrealm" VALUE="Oracle Web Cache Administrator"/>
<Property NAME="authuser" VALUE="36cceb58627a6c450d87b23feaca4062" ENCRYPTED="TRUE"/>
<Property NAME="authpwd" VALUE="960c169811d6091c" ENCRYPTED="TRUE"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" ASSOCIATION="null"/>
</CompositeMembership>
</Target>
<Target TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local" VERSION="1.0">
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="host" VALUE="ora1.ramseier.local"/>
<Property NAME="StandaloneConsoleURL" VALUE="http://ora1.ramseier.local:18100/emd/console"/>
<Property NAME="StatusURL" VALUE="http://ora1.ramseier.local:7778"/>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EM" DISPLAY_NAME="OC4J_EM">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
<Target TYPE="oc4j" NAME="EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV" DISPLAY_NAME="OC4J_EMPROV">
<Property NAME="HTTPMachine" VALUE="ora1.ramseier.local"/>
<Property NAME="OracleHome" VALUE="D:\OracleHomes\oms10g"/>
<Property NAME="version" VALUE="10.1.2"/>
<AssocTargetInstance ASSOCIATION_NAME="ias" ASSOC_TARGET_NAME="EnterpriseManager0.ora1.ramseier.local" ASSOC_TARGET_TYPE="oracle_ias"/>
<CompositeMembership>
<MemberOf TYPE="oracle_ias" NAME="EnterpriseManager0.ora1.ramseier.local"/>
</CompositeMembership>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outias file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outias to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to iAS Homes
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgents:Adding the Central Agent home to D:\OracleHomes\oms10g, VERSION=null
INFO: oracle.sysman.top.agent:DiscoverTargets:addCentralAgent:performing command=D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g, for emdRoot=D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\jdk\bin\java -cp D:\OracleHomes\oms10g\jlib\emConfigInstall.jar oracle.sysman.emSDK.conf.TargetInstaller addcentralagent D:\OracleHomes\agent10g D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
0 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local:18120 of type oracle_emd to D:\OracleHomes\agent10g
9243 [main] DEBUG emSDK.config - Adding target ora1.ramseier.local of type host to D:\OracleHomes\agent10g
16504 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_home of type oc4j to D:\OracleHomes\agent10g
73786 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_HTTP Server of type oracle_apache to D:\OracleHomes\agent10g
183984 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_Web Cache of type oracle_webcache to D:\OracleHomes\agent10g
296266 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local of type oracle_ias to D:\OracleHomes\agent10g
419333 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EM of type oc4j to D:\OracleHomes\agent10g
535770 [main] DEBUG emSDK.config - Adding target EnterpriseManager0.ora1.ramseier.local_OC4J_EMPROV of type oc4j to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\oracle_apache.pl D:\OracleHomes\agent10g ora1.ramseier.local
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
log4j:ERROR No appenders could be found for category (emSDK.config).
log4j:ERROR Please initialize the log4j system properly.
java.lang.UnsatisfiedLinkError: no oraInstaller in java.library.path
     at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1517)
     at java.lang.Runtime.loadLibrary0(Runtime.java:788)
     at java.lang.System.loadLibrary(System.java:834)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.loadNativeLib(OiipwWin32NativeCalls.java:940)
     at oracle.sysman.oii.oiip.osd.win32.OiipwWin32NativeCalls.<clinit>(OiipwWin32NativeCalls.java:42)
     at oracle.sysman.oii.oiip.oiipg.OiipgEnvironment.getEnv(OiipgEnvironment.java:208)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.initUnixPtrFileLoc(OiipgPropertyLoader.java:212)
     at oracle.sysman.oii.oiip.oiipg.OiipgPropertyLoader.<clinit>(OiipgPropertyLoader.java:125)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.updateProperties(OiicStandardInventorySession.java:448)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:255)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:230)
     at oracle.sysman.oii.oiic.OiicStandardInventorySession.initSession(OiicStandardInventorySession.java:179)
     at oracle.sysman.emSDK.conf.InventoryLoader.initInventorySession(InventoryLoader.java:296)
     at oracle.sysman.emSDK.conf.InventoryLoader.getHomeLocations(InventoryLoader.java:328)
     at oracle.sysman.emSDK.conf.InventoryLoader.getAllHomeLocations(InventoryLoader.java:189)
     at oracle.sysman.emSDK.conf.InventoryLoader.main(InventoryLoader.java:454)
Exception in thread "main"
STDOUT=
<Targets>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outapache file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outapache to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\sysman\admin\discover\csa_collector.pl ora1.ramseier.local D:\OracleHomes\oms10g
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 0
INFO: oracle.sysman.top.agent:STDERR=
STDOUT=
<Targets>
<Target TYPE="oracle_csa_collector" NAME="ora1.ramseier.local_oms_csa_collector" DISPLAY_NAME="ora1.ramseier.local_oms_csa_collector">
<Property NAME="recvFileDir" VALUE="D:\OracleHomes\oms10g\oms_csa\results"/>
</Target>
</Targets>
INFO: oracle.sysman.top.agent:Adding D:\OracleHomes\agent10g\sysman\install\target.outcsa file to D:\OracleHomes\agent10g
INFO: oracle.sysman.top.agent:addToTargetsXML:TargetInstaller added target file = D:\OracleHomes\agent10g\sysman\install\target.outcsa to D:\OracleHomes\agent10g successfully.
INFO: oracle.sysman.top.agent:Doing Chronos Configurarion...
INFO: oracle.sysman.top.agent:Executing Command: D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl
INFO: oracle.sysman.top.agent:Requested Operation Completed with Status = 1
INFO: oracle.sysman.top.agent:STDERR=
'stty' is not recognized as an internal or external command,
operable program or batch file.
'stty' is not recognized as an internal or external command,
operable program or batch file.
The Oracleagent10gAgent service is not started.
More help is available by typing NET HELPMSG 3521.
The Oracleagent10gAgent service could not be started.
A service specific error occurred: 1.
More help is available by typing NET HELPMSG 3547.
STDOUT=
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
The Oracleagent10gAgent service is starting...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
Configuring webserver, document root D:\OracleHomes\oms10g/Apache/Apache/htdocs
Javascript and gif files copied in to document root directory.
Configuring webcache D:\OracleHomes\oms10g
Checking if opmn is up ...
D:\OracleHomes\oms10g/opmn/bin/opmnctl status
Processes in Instance: EnterpriseManager0.ora1.ramseier.local
------------------------------------------------+---------
ias-component | process-type | pid | status
------------------------------------------------+---------
DSA | DSA | N/A | Down
HTTP_Server | HTTP_Server | 3248 | Alive
LogLoader | logloaderd | N/A | Down
dcm-daemon | dcm-daemon | N/A | Down
OC4J | home | 3312 | Alive
OC4J | OC4J_EM | 3228 | Alive
OC4J | OC4J_EMPROV | 3600 | Alive
WebCache | WebCache | 3316 | Alive
WebCache | WebCacheAdmin | 3252 | Alive
Restarting webcache...
D:\OracleHomes\oms10g/opmn/bin/opmnctl stopproc process-type=WebCache
opmnctl: stopping opmn managed processes...
D:\OracleHomes\oms10g/opmn/bin/opmnctl startproc process-type=WebCache
opmnctl: starting opmn managed processes...
Adding collection for webcache target : EnterpriseManager0.ora1.ramseier.local_Web Cache
EnterpriseManager0.ora1.ramseier.local_Web Cache ::: EnterpriseManager0_ora1_ramseier_local_Web_Cache
Attempting to reload Agent.
D:\OracleHomes\agent10g/bin/emctl reload
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Oracle Enterprise Manager 10g Release 10.2.0.2.0.
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
Agent is Not Running
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:51:35 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:07 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:52:39 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL*Plus: Release 10.1.0.4.2 - Production on Wed Jan 16 20:53:10 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected.
DEFAULT WEBSITE EM Website CREATION FAILED : ORA-01403: no data foundORA-01403:
no data found
BEGIN
ERROR at line 1:
ORA-20999: CREATE DEFAULT WEBSITE FAILED : ORA-01403: no data found
ORA-06512: at line 224
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.4.0 - Production
With the Partitioning, OLAP and Data Mining options
Website target creation script failed.
INFO: oracle.sysman.top.agent:Requested Operation D:\OracleHomes\agent10g\perl\5.8.3\bin\MSWin32-x86-multi-thread\perl.exe D:\OracleHomes\agent10g\bin\chronos_config.pl has failed to perform with Status = 1
INFO: oracle.sysman.top.agent:6
INFO: oracle.sysman.top.agent:Internal PlugIn for {Micro Step state:step:1:configuration in CfmAggregateInstance: oracle.sysman.top.agent:10.2.0.2.0:common:family=CFM:oh=D:\OracleHomes\agent10g:label=0} failed with an unhandled exception:
java.lang.Exception: 6
     at oracle.sysman.emcp.agent.AgentPlugIn.startProcessing(AgentPlugIn.java:248)
     at oracle.sysman.emcp.agent.AgentPlugIn.invoke(AgentPlugIn.java:223)
     at oracle.sysman.emCfg.core.PerformMicroStep.runJavaClass(PerformMicroStep.java:509)
     at oracle.sysman.emCfg.core.PerformMicroStep.executeMicroStep(PerformMicroStep.java:121)
     at oracle.sysman.emCfg.core.ActionPerformer.performMicroStep(ActionPerformer.java:917)
     at oracle.sysman.emCfg.core.ActionPerformer$Performer.run(ActionPerformer.java:1038)
INFO: oracle.sysman.top.agent:The plug-in Agent Configuration Assistant has failed its perform method
INFO: OuiConfigVariables:IAction.perform() was called on {Action state:OUICA in CfmAggregateInstance: OuiConfigVariables:1.0.0.0.0:common:family=CFM:oh=D:\OracleHomes\oms10g:label=0}
INFO: Framework waiting for Action to complete at 20:53:43.068
INFO: CfwProgressMonitor:actionProgress:About to perform Action=OUICA Status=is running with ActionStep=0 stepIndex=0 microStep=0
INFO: OuiConfigVariables:About to execute plug-in OUI_CA
INFO: OuiConfigVariables:The plug-in OUI_CA is running
INFO: OuiConfigVariables:Launching CmdExec
INFO: OuiConfigVariables:ExitCode=0
INFO: OuiConfigVariables:The plug-in OUI_CA executed as attached=true in separate process with exitcode=0
INFO: OuiConfigVariables:The plug-in OUI_CA has successfully been performed
INFO: done waiting for Action from 20:53:43.068
INFO: Cfm.save() was called
INFO: Cfm.save(): 21 aggregate instances saved
Best Regards
Andy

sorry, but thats only the beginning of the torture....
i tried to update my gridcontrol installation to the actual version, .... many times with many retries but still havent a step by step resultion :-(
much thanks to vmware or ms hyper-v for snapshotfeatures

Error Installing a TREX Instance Only 7.0 on a Windows 2003 Server (64 bit)

Similar Messages

Maybe you are looking for