Error installing Admin Utility on Win XP SP2

Hello all,
I am getting this error when I try to install the admin utility on my Dell Lattitude C610...
1608: Unable to create InstallDriver instance, Return Code: -2147024894
I have tried re-downloading the application to a new location and still get the same message. I did a search on the forums and found nothing which applies. Any Ideas? I was trying to connect to a clients Extreme for administration.... I was able to access the internet via the APEX without difficulty.

Have a look at:
http://consumer.installshield.com/kb.asp?id=Q108440

Similar Messages

Configuration error -- airport admin utility

I'm stuck and hoping someone here might be able to help me. I have a new AirPort Extreme 802.11n and when I open the airport admin utility, a "Configuration Error" message appears telling me that "This version of Airport Admin Utility does not support this base station..."
What's worse is that there is only a "Continue" button, and it does not work (i.e. does not do anything, including dismiss the message box).
I installed the software that came with the router, but I get this error on both my MBP and my iMac.
I've tried selecting the check box that says "No longer warn me for this base station", but I am still unable to dismiss this message. The fact that this message won't go away means I can't access the panel behind it to actually configure the router. The message is not modal but also not draggable, so although I can access some fields, I can't access the fields directly underneath the message.
This is so frustrating -- please help!

Hi James,
The installation disk that came with your AE installed two programs to your Utilities folder. One is Airport Utility. The other is Airport Disk Utility.
The Airport Administration Utility was already on your machine, and that only works with previous Airports. Go back again and click to open Airport Utility and you should be fine.

Error installing LabVIEW 2011 on Win 7

I'm getting an error installing LabVIEW 2011 Professional:
I found a thread concerning missing MSIs, which suggested that one run setup.exe with the /log function, so I did, but I don't think it actually says anything useful.
I also found a Microsoft download page for WindowsInstaller-KB893803-v2-x86.exe, which is the thing that's supposed to be missing. This seems to be an old version of the installer (most recent compatible OS = WinXP SP2), so I don't really feel like installing this on my Windows 7 system.
Help!! Thanks in advance.
-- Philip

Hi Keller,
I'm Jamie an Applications Engineer at NI UK.
It does seem that you are missing some of the necessary support files required for the installer to run correctly, the details of which are available in the KnowledgeBase article here. Did you download the install files or are you installing from disk?
In addition to the setup.exe file, ensure that you have copied the following folders to the target PC or destination folder when creating an installer with LabVIEW.
bin
license
supportfiles
Hope this helps get you up and running with LabVIEW 2011, let me know if you experience any further issues.
Thanks
Jamie
Jamie S.
Applications Engineer
National Instruments

Error Installing Airport Utility on OSX 10.8.2

I can't install Airport Utility on OSX 10.8.2 so that I can install Airport Extreme. Error message says the version of Mac OS X is not supported. What can I do? Easily!

You have to install AirPort Utility from the disc if you're using Windows on your PC, so that's because Apple doesn't say it. Also, you could have bought an old AirPort Extreme that includes an older AirPort version for another Mac OS X

Error installing SAP IK XI 3.1 + SP2

Have installed BOE XI 3.1 + SAP IK + BOE XI 3.1 SP2. Trying to install SAP IK SP2, I get the following error message...
"The SAP unicode RFC library could not be found. This library is avaialble as a part of SAP Frontend, which is a pre-requiste for the installation of this software. Please install 'Unicode RFC libraries' feature in SAP GUI 710 installer, then re-run this setup"
Per the installation documentation server side pre-requisites, I don't need SAP GUI installed on the server and have not installed it. I have installed SAP JCO. Copied the 2 dll files to Windows\System32 and copied the sapjco.jar to Tomcat shared\lib.
SAP Integration Kit XI 3.1 installed ok.
I am able to add the BW Server information in the SAP Authentication tab and import roles.
Using SAPJCO 2.1.8
Do I need SAP GUI on the server? Anybody seen this error message?
Assistance appreciated.
Thanks,
Thiag.

Ingo,
Thanks for the response... I have both the librfc32.dll and sapjcorfc.dll in the Windows/System32 directory. SAP IK installed ok, able to set up SAP Authentication and import roles.
I'm only getting this error with the install of SAP IK - SP2. I have checked the install logs also, there are no other error messages.
Anything else, I can look at?
Appreciate the assistance..
Thanks,
Thiag.

Error installing Oracle 10g on Windows XP SP2

Hi
I had an error message at the end of the setup.
Error instantiating EM configuration files.
Log about the error is below.
thanks in advance for your help
OS:windows xp sp2
C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\orcl\emconfig.log
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: '\regedit.exe' i ya da d? komut, al?t?r?labilir
program ya da toplu i dosyas? olarak tan?nm?yor.
Creating registry entries failed. Aborting...
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C C:\oracle\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole C:\oracle\product\10.2.0\db_1\mylaptop_orcl mylaptop:3938 mylaptop orcl
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Failed to deploy state dirs
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error instantiating EM configuration files
at oracle.sysman.emcp.EMAgentConfig.updateAgentConfigFiles(EMAgentConfig.java:2560)
at oracle.sysman.emcp.EMAgentConfig.performConfiguration(EMAgentConfig.java:1166)
at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:207)
at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:185)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:146)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at java.lang.Thread.run(Thread.java:534)

Hi
I had an error message at the end of the setup.
Error instantiating EM configuration files.
Log about the error is below.
thanks in advance for your help
OS:windows xp sp2
C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\orcl\emconfig.log
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: '\regedit.exe' i ya da d? komut, al?t?r?labilir
program ya da toplu i dosyas? olarak tan?nm?yor.
Creating registry entries failed. Aborting...
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing CMD /C C:\oracle\product\10.2.0\db_1\bin\emctl.bat deploy dbconsole C:\oracle\product\10.2.0\db_1\mylaptop_orcl mylaptop:3938 mylaptop orcl
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.EMAgentConfig instantiateEMConfigFiles
CONFIG: Failed to deploy state dirs
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error instantiating EM configuration files
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\orcl\emConfig.log for more details.
Dec 7, 2005 7:40:57 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error instantiating EM configuration files
at oracle.sysman.emcp.EMAgentConfig.updateAgentConfigFiles(EMAgentConfig.java:2560)
at oracle.sysman.emcp.EMAgentConfig.performConfiguration(EMAgentConfig.java:1166)
at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:207)
at oracle.sysman.emcp.EMAgentConfig.invoke(EMAgentConfig.java:185)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:146)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:430)
at java.lang.Thread.run(Thread.java:534)

Error installing acrobat XI Pro win 8.1 64 bit

I am getting the following error every time I try to install Acrobat XI Pro on my windows 8.1 64-bit machine.
I have tried looking everywhere I can find online having to do with this error but no matter what I try I cannot get it to install properly.
Any help would much appreciated.

Moving this question to the Acrobat Installation & Update issues forum.
Acrobat Installation & Update Issues

Problems downloading/installing Acrobat Reader on WIN XP SP2

I ma having trouble with the Acrobat installer .exe that downloads from this page:
http://get.adobe.com/reader/download/?installer=Reader_11.0_English_for_Windows&os=XP&brow ser_type=KHTML&browser_dist=Chrome&d=McAfee_Security_Scan_Plus_Chrome_Browser&dualoffer=fa lse
It proceeds to download the installer. When I run the installer it gives me a couple of .js errors and then sticks on 0% recieving install...
On this same exact page, below it reads:
Click here for troubleshooting information.
Which links to a broken URL.
Please allow for a direct download for when problems like these occur.

The Minimum requirement for Reader X and XI is Windows XP SP3.

Airport Admin Utility Problem: Configuration error

I just bought an Airport Extreme 802.11n. Installed the program, checked for updates, setted up, everything is working fine.
Except, the AirPort Admin Utility. Everytime I open the program and select Config, it pops up with a window that says Config Error: This version of AirPort Admin Utility does not support this base station. You can't update the sofware for this base station, but you may be able to make confiuration changes to it.
And this window does not go away when I click continue. But I am able to change password and select any of the options that is showing on the current screen. But the error window does not go away.
I need to get into the Port Mapping window but this error window is blocking it. Please Help.

On mine there was a previous Airport Admin Utility App. This one was pre-installed and doesn't work with my new AirPort Extreme BS. There is another App called, "Airport Utility" that was installed from the new DVD and it works w/ the new Airport Extreme BS.

Airport Admin Utility Error

I just bought a new G5 with the new Airport Extreme and upgraded to OS X 10.4.9 because I was getting a "Configuration" error when running the Airport Admin Utility. The error reads "Configuration Error, This version of Airport Admin Utility does not support this base station." I went the the apple support site and downloaded an update to the airport extreme software.
The problem was not solved. While I can connectivity through ethernet on one machine, the airport's light is flashing amber and I have no wireless connectivity. Could anyone help me with this? Thanks

Airport Utility is for the new Airport Extreme although one can use it to setup an Express to a point.
The Airport Admin Utility does not work with the new Extreme router.
When you install the Airport software from the CD you received when you bought the router it does not overwrite the older Airport software.

Configuration error on Airport Admin Utility

Just bought an airport extreme 802.11n. Loaded the software that came with it, then when I try to use the Airport Admin Utility, I get a "Configuration Error" that says this version of the utility does not support this base station. You can't update the software for this base station, but you may be able to make configuration changes to it. Please go to apple.com/support to locate a newer version of the utility.
So, I did that, downloaded, mounted, installed, and it doesn't see the base station. So, I manually entered the ip and password, and it would not update the utility.
I'm getting an amber blinking light, so I need to use the utility to change settings and get it running properly.
What am I doing wrong?
Thanks for any help,
Cindy

Duane, Thanks! I just now figured that one out. Now I'm green across the board - even with my son's XBOX live! YAY!
Thanks.

Airport Admin Utility Error 6753

Trying to add original Airport Express (for iTunes) to Windows wireless network based on a Belkin G54 router but after inputing router IP address and password in Airport Admin Utility I get the Error 6753 and flashing amber when the program tries to read router. Running Windows VISTA and Live OneCare. I've tried resetting, uninstalling OneCare, and newer Airport Utility but same result. Would appreciate any help with this.

Airport Utility is for the new Airport Extreme although one can use it to setup an Express to a point.
The Airport Admin Utility does not work with the new Extreme router.
When you install the Airport software from the CD you received when you bought the router it does not overwrite the older Airport software.

Hal.dll error during/after Win XP SP2 installation

At the moment I'm trying to install Win XP (SP2) into a bootcamp partition. I have a Mac Pro with 4 HDDs.
HDD1: OSX
HDD2: free
HDD3: OSX Data (raid 1)
HDD4: OSX Data (raid 1)
The setup I'd like to have is:
HDD2:
(1) Bootcamp-Partition (NTFS ~75GB)
(2) Bootcamp-Scratch (NTFS ~150GB)
(3) Scratch (HFS+ ~250GB)
I partitioned the disk that way (with FAT32 instead of NTFS) and booted from the Windows install disk. The installer starts, reformats disk (1) to NTFS and copies data onto the disk.
After the first reboot it breaks with hal.dll error. The files are on the disk but boot.ini seems to be corrupt. The "bootcfg" command from the recovery console is not working - it only duplicates the wrong entry in boot.ini.
After the third non-working installation I tried to move the Bootcamp-Partition into the middle, OSX in front:
(1) Scratch (HFS+ ~250GB)
(2) Bootcamp-Partition (NTFS ~75GB)
(3) Bootcamp-Scratch (NTFS ~150GB)
Same error.
Any hints on howto do that? Or will I have to move the Bootcamp-Disk to the end? How to succeed in having the Bootcamp-Scratch as 'D:' in Windows if I swap those two partitions?
BTW: I succeeded to install WinXP on the same disk before. Back then I only had a 75GB Bootcamp-Partition on the disk (no other partition) and had the disk in Bay 3. But I moved it to Bay 2 because of performance problems in Bay3/4 (PIO-mode) and don't want to waste 400GB in the future .

First of all I believe this is not the right place to discuss the issue. This issue is related to the Windows operating system file corruption and I think the physical location of the hard drive is not the cause of the issue.
The hal.dll file is a system file which holds the hardware access layer information and linking the necessary components. This include the information about all the hardware resources for the operating system. What you had done to change the hardware configuration files in the boot.ini looks ok. Also you can try this link.
http://shanegfowler.wordpress.com/2007/01/10/missing-haldll-error-corrupt-bootin i-file-quick-fix/
Hope that helps you........

Can't install ITunes-Error 2324-Admin log in

When I tried opening ITunes tonight, it asked me to download the new version. When I tried to download, it wouldn't allow me to do it. I uninstalled ITunes and when I tried to re-install, I got an error stating that it had encountered an unexpected error installing this package, error code 2324. I looked up error code 2324 on the computer and Microsoft instructed me to run the Fix It program. After running this program, I was able to run the ITunes install to a certain point, getting further than I had so far tonight. Then I got an error box that said, "The installer has insufficient privileges to access this directory: C:\Program Files\iTunes. The installation cannot continue. Log in as administrator or contact your system administrator."
What do I have to log into as the administrator? My computer? I am the only user/admin on my computer and the only person who even uses my computer.
I need to fix this....all of my music is on my IPod and without iTunes, I can't access it or purchase new music, which was all I was trying to do tonight.
Thanks!

Error 1305 is usualy something to do with the CD drive or the media.
Are you trying to install from the CD?
You can download iTunes here -> http://www.apple.com/support/downloads/itunes605.html
Error 1603 is usually a disk space problem. See here -> http://consumer.installshield.com/kb.asp?id=Q111019
How much free space is on your C: drive?
Start -> My computer.

Error of "Not a Valid Win 32 application " installing 7.0 for iPod Shuffle

I have downloaded the apple Itunes 7 software and I get an error of : Not a Valid Win 32 application I have windows xp I have been trying to figure this out for a couple of hours.
All I can figure out is that it is because I have dial up and not a broadband connection (which is one of the requirements for 7.0). If this is the problem, what do I do to get around the not having broadband?
Any help would be greatly appreciated!!!! I would love my new present to work! PS. a family member already has an Ipod Nano installed, can we use the same iTunes?

I have downloaded the apple Itunes 7 software and I
get an error of : Not a Valid Win 32 application I
have windows xp I have been trying to figure this out
for a couple of hours.
All I can figure out is that it is because I have
dial up and not a broadband connection (which is one
of the requirements for 7.0). If this is the
problem, what do I do to get around the not having
broadband?
Any help would be greatly appreciated!!!! I would
love my new present to work! PS. a family member
already has an Ipod Nano installed, can we use the
same iTunes?
I found that I had a bad (not complete) download. After redownloading 7.0 and installing it, it worked great. Hope this helps other with my same problem.

Error installing Admin Utility on Win XP SP2

Similar Messages

Maybe you are looking for