Error installing APX 3.01 on XE: script \builder\f4411.sql
Hello,
I have installed ORACLE XE 10.2.0 on Windows XP in German.
I want now to install APEX 3.01 using the script
@apexins password SYSAUX SYSAUX TEMP /i/
The installation script cannot be performed to the end.
The following error appears at the end of the logfile:
...authentication schemes
......scheme 36917030094496871
......scheme 36917105493496871
begin
FEHLER in Zeile 1:
ORA-01756: Anführungsstrich fehlt bei Zeichenfolge
ORA-06512: in Zeile 2
This error happens when the installation runs the script ...\Apex\builder\f4411.sql
Thank you for any support.
Before trying to install this release you must setting NLS_LANG like that :
SET NLS_LANG=AMERICAN_AMERICA.WE8ISO8859P1
Best Regars
Similar Messages
-
Error while executing SSIS package which contains Script component through SQL Server Agent Job
Hello All,
I have written one SSIS 2012 package which is fetching records from CSV and put it into staging DB and from staging DB , using SSIS script component task, I am inserting data into Dynamics CRM. So far it is working fine when
I manually execute SSIS package.
but when I run the SSIS package using SQL server agent job, I encounter below error. After seeing below error at step "Insert TLM Headers Script Component " I understand that it is failing at script component which I have used in SSIS package,
but I am not sure what is the cause behind that? please advise.
Error:
Executed as user: domain\user account. Microsoft (R) SQL Server Execute Package Utility Version 11.0.5556.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 1:21:41 PM Error: 2015-02-25
13:21:45.94 Code: 0xC0047062 Source: Insert TLM Headers Script Component [205] Description: System.ServiceModel.FaultException: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs. Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message
reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) Exception rethrown at [0]: at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.HandleUserException(Exception
e) at Microsoft.SqlServer.Dts.Pipeline.ScriptComponentHost.ProcessInput(Int32 inputID, PipelineBuffer buffer) at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100
wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket) End Error Error: 2015-02-25 13:21:45.94 Code: 0xC0047022 Source: Insert TLM Headers SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Script Component" (205) failed with error code 0x80131501 while processing input "Input 0" (215). The identified component returned an error
from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:41 PM Finished: 1:21:45 PM Elapsed: 4.009 seconds. The package execution failed. The step failed.
Thanks
Pankajdomain\user account has not proper rights
That being said, often SSIS jobs require a proxy to be runnable and this is how you make one up
http://www.mssqltips.com/sqlservertip/2163/running-a-ssis-package-from-sql-server-agent-using-a-proxy-account/
Arthur
MyBlog
Twitter -
Error installing BW 3.1 (WAS 6.20) on MS-SQL
Hi all
I'm currently working on a new installation of BW 3.1 (WAS 6.20) on MSSQL. I got the SQL Server installed, along with SP3 and I have setup the Central Instance with no errors as well. However, when I do the Database Instance install, I get an error at the Database Load (post processing) Screen.
Up to this point, it appears ok but now I get a pop up message saying there has been a error. When I check SAPSSEXC.log I can isolate the following error.
***LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
I've tried reinstalling multiple times and it keeps happening. Is it an authorization issue with MS SQL? Can someone advise, if I need to change any user ids, etc. I'am logged in as administrator, trying to do a local installation and have tried to log in as <SID>adm as well but get the same error...
Some details: OS is Win2003 server, DB is MSSQL 2000 with SP3, CI and DB are one same server. If anyone can advise, i would appreciate any input.
Below is a paste of the complete SAPSSEXC logfile.
Regards
/Frank
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20041129162541
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\BW1\SYS\exe\run/R3load.exe -ctf I C:\InstalFiles\Export1/DATA/SAPSSEXC.STR C:\InstalFiles\Export1/DB/DDLMSS.TPL C:\SAPinst MSSQL KERNEL/SAPSSEXC.TSK MSS -l C:\SAPinst MSSQL KERNEL/SAPSSEXC.log
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: job completed
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20041129162542
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: START OF LOG: 20041129162604
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: sccsid @(#) $Id: //bas/620/src/R3ld/R3load/R3ldmain.c#6 $ SAP
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: version R6.20/V1.2
E:\usr\sap\BW1\SYS\exe\run/R3load.exe -dbcodepage 1100 -i C:\SAPinst MSSQL KERNEL/SAPSSEXC.cmd -l C:\SAPinst MSSQL KERNEL/SAPSSEXC.log -loadprocedure fast
DbSl Trace: SQLOLEDB Provider Release:08.50.1022
DbSl Trace: Shared cache sizes: header 52 bytes, 10000 names (13360000 bytes), 1000 dynamic statements (5436000 bytes), total 18796052 bytes
DbSl Trace: Initializing private procedure name cache.
DbSl Trace: procedure cache created/attached
DbSl Trace: Thank You for using the SLOLEDB-interface
DbSl Trace: Connected to db server : [cphtst26], dbname: BW1, dbuser: bw1
DbSl Trace: Using dynamic link library 'E:\usr\sap\BW1\SYS\exe\run\dbmssslib.dll'
DbSl Trace: dbmssslib.dll patch info
DbSl Trace: patchlevel 0
DbSl Trace: patchno 494
DbSl Trace: patchcomment MSSQL: SY-DBCNT for EXEC SQL. EXECUTE(..) ENDEXEC (574316)
DbSl Trace: The IRow interface is supported by this OLEDB provider
DbSl Trace: ParamStmtExec: line 23549. hr: 0x80040e37 Invalid object name 'SVERS'.
DbSl Trace: HandleOledbError [ParamStmtExec,line 23549]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
DbSl Trace: ParamStmtExec failed. HR 80040e37 DBSL retcode 103. stmt: [SELECT VERSION AS c FROM SVERS ]
DbSl Trace: Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:12157
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on open
DbSl Trace: DbSlRead - <##Y2CPHTST26bw100000019040000000001162604>
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on fetch
DbSl Trace: DbSlRead - <##Y2CPHTST26bw100000019040000000001162604>
Mon Nov 29 16:26:04 2004
***LOG BZA=> table SVERS does not exist on database [dblink#1 @ 1292] [dblink 1292 ]
(DB) INFO: connected to DB
DbSl Trace: ParamStmtExec: line 23549. hr: 0x80040e37 Invalid object name 'SVERS'.
DbSl Trace: HandleOledbError [ParamStmtExec,line 23549]: Error/Message: (err 208, sev 16), Invalid object name 'SVERS'.
DbSl Trace: ParamStmtExec failed. HR 80040e37 DBSL retcode 103. stmt: [SELECT VERSION AS c FROM SVERS ]
DbSl Trace: Conn_i:1 selection:1 singleton:1 flag_fupd:0 use_cursor:0 chksum:12157
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on open
DbSl Trace: DbSlRead - <##Y2CPHTST26bw100000019040000000002162604>
DbSl Trace: DbSlRead - Error 103 (dbcode 208) on fetch
DbSl Trace: DbSlRead - <##Y2CPHTST26bw100000019040000000002162604>
Interface access functions from dynamic library dbmssslib.dll loaded.(IMP) INFO: import of BRATEXT completed (259725 rows)
(IMP) INFO: import of D010INC completed (359297 rows)
(IMP) INFO: import of D010TAB completed (1180062 rows)
(IMP) INFO: import of D020S completed (26058 rows)
(IMP) INFO: import of D020T completed (46964 rows)
(IMP) INFO: import of D021T completed (220317 rows)
(IMP) INFO: import of D301T completed (0 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of D345T completed (0 rows)
(IMP) INFO: import of D347T completed (0 rows)
(IMP) INFO: import of DBDIFF completed (156 rows)
(IMP) INFO: import of DD01L completed (13508 rows)
(IMP) INFO: import of DD01T completed (28975 rows)
(IMP) INFO: import of DD02L completed (35238 rows)
(IMP) INFO: import of DD02T completed (73738 rows)
(IMP) INFO: import of DD03L completed (368844 rows)
(IMP) INFO: import of DD03T completed (33493 rows)
(IMP) INFO: import of DD04L completed (53152 rows)
(IMP) INFO: import of DD04T completed (111036 rows)
(IMP) INFO: import of DD06L completed (56 rows)
(IMP) INFO: import of DD06T completed (212 rows)
(IMP) INFO: import of DD07L completed (20163 rows)
(IMP) INFO: import of DD07T completed (54024 rows)
(IMP) INFO: import of DD09L completed (10510 rows)
(IMP) INFO: import of DD20L completed (19 rows)
(IMP) INFO: import of DD25L completed (3015 rows)
(IMP) INFO: import of DD26S completed (5793 rows)
(IMP) INFO: import of DD27S completed (23964 rows)
(IMP) INFO: import of DD28S completed (4856 rows)
(IMP) INFO: import of DD29L completed (2229 rows)
(IMP) INFO: import of DD30L completed (1157 rows)
(IMP) INFO: import of DD30T completed (2332 rows)
(IMP) INFO: import of DD31S completed (1310 rows)
(IMP) INFO: import of DD32S completed (3925 rows)
(IMP) INFO: import of DD33S completed (3406 rows)
(IMP) INFO: import of DD35L completed (1663 rows)
(IMP) INFO: import of DD36S completed (5348 rows)
(IMP) INFO: import of DD40L completed (7005 rows)
(IMP) INFO: import of DD40T completed (14165 rows)
(IMP) INFO: import of DD42S completed (1828 rows)
(IMP) INFO: import of DDTYPES completed (103119 rows)
(IMP) INFO: import of DDTYPET completed (2820 rows)
(IMP) INFO: import of DDXTF completed (0 rows)
(IMP) INFO: import of DDXTF_CONV_UC completed (0 rows)
(IMP) INFO: import of DDXTT completed (0 rows)
(IMP) INFO: import of DDXTT_CONV_UC completed (0 rows)
(IMP) INFO: import of DF03L completed (0 rows)
(IMP) INFO: import of DF03T completed (24502 rows)
(IMP) INFO: import of DF04L completed (44 rows)
(IMP) INFO: import of DF04T completed (25145 rows)
(IMP) INFO: import of DF06L completed (0 rows)
(IMP) INFO: import of DF06T completed (0 rows)
(IMP) INFO: import of DF07L completed (0 rows)
(IMP) INFO: import of DF07T completed (0 rows)
(IMP) INFO: import of DF08L completed (0 rows)
(IMP) INFO: import of DF08T completed (0 rows)
(IMP) INFO: import of DF10L completed (0 rows)
(IMP) INFO: import of DF10T completed (0 rows)
(IMP) INFO: import of DF11L completed (0 rows)
(IMP) INFO: import of DF11T completed (0 rows)
(IMP) INFO: import of DF12L completed (0 rows)
(IMP) INFO: import of DF12T completed (0 rows)
(IMP) INFO: import of DF13L completed (0 rows)
(IMP) INFO: import of DF13T completed (0 rows)
(IMP) INFO: import of DF14L completed (542 rows)
(IMP) INFO: import of DF14T completed (7042 rows)
(IMP) INFO: import of DF15L completed (0 rows)
(IMP) INFO: import of DF15T completed (0 rows)
(IMP) INFO: import of DF16L completed (0 rows)
(IMP) INFO: import of DF16T completed (0 rows)
(IMP) INFO: import of DF30S completed (0 rows)
(IMP) INFO: import of DF34S completed (0 rows)
(IMP) INFO: import of DF40D completed (91 rows)
(IMP) INFO: import of DF41S completed (373 rows)
(IMP) INFO: import of DF42S completed (0 rows)
(IMP) INFO: import of DF43S completed (0 rows)
(IMP) INFO: import of DIAPAR completed (682 rows)
(IMP) INFO: import of DM02L completed (286 rows)
(IMP) INFO: import of DM02S completed (0 rows)
(IMP) INFO: import of DM02T completed (572 rows)
(IMP) INFO: import of DM03S completed (192 rows)
(IMP) INFO: import of DM25L completed (93 rows)
(IMP) INFO: import of DM26L completed (281 rows)
(IMP) INFO: import of DM40L completed (109 rows)
(IMP) INFO: import of DM40T completed (218 rows)
(IMP) INFO: import of DM41S completed (370 rows)
(IMP) INFO: import of DM42S completed (371 rows)
(IMP) INFO: import of DM42T completed (975 rows)
(IMP) INFO: import of DM43T completed (13 rows)
(IMP) INFO: import of DM45L completed (39 rows)
(IMP) INFO: import of DM45T completed (1235 rows)
(IMP) INFO: import of DM46S completed (79 rows)
(IMP) INFO: import of DOKCLU completed (298826 rows)
(IMP) INFO: import of DOKHL completed (361786 rows)
(IMP) INFO: import of DOKIL completed (311698 rows)
(IMP) INFO: import of DSYST completed (1880 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of DYNPSOURCE completed (26058 rows)
(IMP) INFO: import of ENLFDIR completed (54453 rows)
(IMP) INFO: import of EUDB completed (5577 rows)
(IMP) INFO: import of EUGUITEXT completed (854 rows)
(IMP) INFO: import of EUOBJ completed (417 rows)
(IMP) INFO: import of EUOBJEDIT completed (277 rows)
(IMP) INFO: import of EUOBJT completed (536 rows)
(IMP) INFO: import of FUNCT completed (353242 rows)
(IMP) INFO: import of FUPARAREF completed (364467 rows)
(IMP) INFO: import of IADB2 completed (20 rows)
(IMP) INFO: import of IADB6 completed (20 rows)
(IMP) INFO: import of IAINF completed (20 rows)
(IMP) INFO: import of IAMSS completed (0 rows)
(IMP) INFO: import of IAORA completed (20 rows)
(IMP) INFO: import of IGDB2 completed (10 rows)
(IMP) INFO: import of IGORA completed (15 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: import of INDTEXT completed (42717 rows)
(IMP) INFO: import of LDBA completed (0 rows)
(IMP) INFO: import of LDBB completed (0 rows)
(IMP) INFO: import of LDBD completed (17 rows)
(IMP) INFO: import of LDBH completed (6 rows)
(IMP) INFO: import of LDBN completed (38 rows)
(IMP) INFO: import of LDBNT completed (76 rows)
(IMP) INFO: import of LDBQUAN completed (5 rows)
(IMP) INFO: import of LDBT completed (35 rows)
(IMP) INFO: import of MACID completed (16 rows)
(IMP) INFO: import of MACOB completed (18 rows)
(IMP) INFO: import of MCUSREXITS completed (0 rows)
(IMP) INFO: import of MSSPROCS completed (201 rows)
(IMP) INFO: import of MSSSOURCE completed (20644 rows)
(IMP) INFO: import of MSSSPVERS completed (2 rows)
(IMP) INFO: import of MSSSTORAGE completed (1 rows)
(IMP) INFO: import of NOTRA completed (192 rows)
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: InitFastLoad failed with <3: (null)>(IMP) INFO: DBSL will be used(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of SEOCLASSEX completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of SEOCOMPOEX completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TERCL completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TERCL3 completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TERM2 completed (0 rows)
(IMP) INFO: import of TERM3 completed (0 rows)
(IMP) INFO: import of TERM4 completed (0 rows)
(IMP) INFO: import of TERM6 completed (0 rows)
(IMP) INFO: import of TERM7 completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TFM18X completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TITLE completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TRBAT completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TSTC_SRT completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(IMP) INFO: import of TTREEN completed (0 rows)
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(RFF) ERROR: file SAPSSEXC.002 not found
(TFH) ERROR: Unable to close C:\InstalFiles\Export1/DATA/SAPSSEXC.001
(DB) INFO: disconnected from DB
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: job finished with 68 error(s)
E:\usr\sap\BW1\SYS\exe\run/R3load.exe: END OF LOG: 20041129173637Hello!
I am having exactly the same problem with my install of BW IDES. I have reinstalled 10 times and have it admit I'm getting tired of the repetition!
How were you able to overcome or workaround this error?
Thanks,
Bob -
As stated previously...I have removed and re-installed Firefox, but am still getting "script error" when shutting it down and going to "restore session" when opening. Please advise what to do about this problem. Thank you.
Firefox 21 and Firefox 22 running on Windows 7 have been reported to take a long time to "wake up" from sleep. I realize hibernation is different than sleep, but... this is the closest match for your description.
Some users have reported that this problem is resolved in Firefox 23 (currently in beta). Others have had inconsistent luck with minimizing Firefox before letting Windows sleep and other measures.
Please check out this (very long) thread for more information: [https://support.mozilla.org/questions/961898 browser freezes after resuming from sleep]
Or jump to the part about Firefox 23: https://support.mozilla.org/questions/961898?page=3#answer-457321
The fact that this just started recently suggests perhaps it is related to another program or update, but I don't think anyone has confirmed the exact interaction that causes the problem. -
I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks! -
get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
Script: chrome://browser/content/places/editBookmarkOverlay.js:909 -
Error: installing Java Add-in for Central instance
Dear experts,
i've installed the SCS and the Java Add-in for DB successful. While trying to install the java add-in for the central instance i get the following error:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In for ABAP > MaxDB > Central System > Central Instance Java Add-In ( Last error reported by the step :TypeError: instance has no properties (in script NW_Addin_CI|ind|ind|ind|ind, line 109346: ???)
Thanks in advance.
DanielHi,
Check below thread:
Error installing SAP NetWeaver 2004s Java Trial Version (SP9)
Thanks
Sunny -
Error installing Eterm(libast)
Good evening.
I'm using fluxbox and need Eterm to be able to set the background and such.
Unfortunately I get the message that I need libast in order to build Eterm.
So I execute the following commands:
wget http://aur.archlinux.org/packages/libast/libast.tar.gz
tar xfv libast.tar.gz
cd libast
makepkg
Then a huge amount of text fills the terminal and at the end I find the following message:
==> ERROR: Build failed. Aborting...
For those who are interested here's the output produced by makepkg:
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
/home/daniel/libast/src/libast-0.7/missing: Unknown `--run' option
Try `/home/daniel/libast/src/libast-0.7/missing --help' for more information
configure: WARNING: `missing' script is too old or missing
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for preferred libtoolize... libtoolize
checking for preferred aclocal... aclocal
checking for preferred autoconf... autoconf
checking for preferred autoheader... autoheader
checking for preferred automake... automake
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking how to run the C preprocessor... gcc -E
checking for egrep... grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for a sed that does not truncate output... /bin/sed
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... no
checking for f77... no
checking for xlf... no
checking for frt... no
checking for pgf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for f90... no
checking for xlf90... no
checking for pgf90... no
checking for epcf90... no
checking for f95... no
checking for fort... no
checking for xlf95... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for gfortran... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc static flag works... yes
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
appending configuration tag "F77" to libtool
checking how to run the C preprocessor... gcc -E
checking for AIX... no
checking for library containing strerror... none required
checking minix/config.h usability... no
checking minix/config.h presence... no
checking for minix/config.h... no
checking whether gcc needs -traditional... no
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking if malloc debugging is wanted... no
checking for sed... /bin/sed
checking for rm... rm
checking for cp... cp
checking for chmod... chmod
checking for tar... tar
checking for mkdir... mkdir
checking for ctags... true
checking for ar... ar
checking for mv... mv
checking whether ln -s works... yes
checking for char... yes
checking size of char... 1
checking for short... yes
checking size of short... 2
checking for int... yes
checking size of int... 4
checking for long... yes
checking size of long... 4
checking for long long... yes
checking size of long long... 8
checking whether byte ordering is bigendian... no
checking for an ANSI C-conforming const... yes
checking for inline... inline
checking for sys/wait.h that is POSIX.1 compatible... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/select.h usability... yes
checking sys/select.h presence... yes
checking for sys/select.h... yes
checking sys/time.h usability... yes
checking sys/time.h presence... yes
checking for sys/time.h... yes
checking sys/sockio.h usability... no
checking sys/sockio.h presence... no
checking for sys/sockio.h... no
checking sys/byteorder.h usability... no
checking sys/byteorder.h presence... no
checking for sys/byteorder.h... no
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking utmpx.h usability... yes
checking utmpx.h presence... yes
checking for utmpx.h... yes
checking for unistd.h... (cached) yes
checking bsd/signal.h usability... no
checking bsd/signal.h presence... no
checking for bsd/signal.h... no
checking stdarg.h usability... yes
checking stdarg.h presence... yes
checking for stdarg.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking whether time.h and sys/time.h may both be included... yes
checking for mode_t... yes
checking for off_t... yes
checking for pid_t... yes
checking for uid_t in sys/types.h... yes
checking return type of signal handlers... void
checking for memmove... yes
checking for putenv... yes
checking for strsep... yes
checking for memmem... yes
checking for usleep... yes
checking for snprintf... yes
checking for vsnprintf... yes
checking for strcasestr... yes
checking for strcasechr... no
checking for strcasepbrk... no
checking for strrev... no
checking for strnlen... yes
checking for library containing hstrerror... none required
checking whether snprintf ignores n... no, snprintf is ok
checking whether vsnprintf ignores n... no, vsnprintf is ok
checking security of interaction between symlink and open... secure
checking for working RLIMIT_NPROC resource limit... no
checking for working RLIMIT_MEMLOCK resource limit... no
checking for debugging level... 4
checking if STRICT_ISO_C99 required... yes
checking for X... libraries , headers
checking for gethostbyname... yes
checking for connect... yes
checking for remove... yes
checking for shmat... yes
checking for IceConnectionNumber in -lICE... yes
checking for XOpenDisplay in -lX11... yes
checking for imlib2-config... imlib2-config
checking for MMX support... yes
checking pcre.h usability... yes
checking pcre.h presence... yes
checking for pcre.h... yes
checking for library containing pcre_compile... -lpcre
checking for regular expression support... pcre
checking if backquote execution support should be enabled... yes
configure: creating ./config.status
config.status: creating include/libast/types.h
config.status: creating Makefile
config.status: creating include/Makefile
config.status: creating include/libast/Makefile
config.status: creating src/Makefile
config.status: creating test/Makefile
config.status: creating libast-config
config.status: creating config.h
config.status: config.h is unchanged
config.status: creating include/libast/sysdefs.h
config.status: include/libast/sysdefs.h is unchanged
config.status: executing depfiles commands
libast 0.7
Configuration:
Source code location: .
Host System Type: i686-pc-linux-gnu
Preprocessor: gcc -I/usr/include
Compiler: gcc -march=i686 -mtune=generic -O2 -pipe
Linker: gcc -L/usr/lib -L/usr/lib -lImlib2 -lfreetype -lz -L/usr/X11R6/lib -lX11 -lXext -ldl -lm -lSM -lICE -lpcre
Install path: /usr
Now type 'make' to build libast 0.7.
make all-recursive
make[1]: Entering directory `/home/daniel/libast/src/libast-0.7'
Making all in include
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/include'
Making all in libast
make[3]: Entering directory `/home/daniel/libast/src/libast-0.7/include/libast'
Makefile:425: warning: overriding commands for target `types.h'
Makefile:234: warning: ignoring old commands for target `types.h'
make all-am
make[4]: Entering directory `/home/daniel/libast/src/libast-0.7/include/libast'
Makefile:425: warning: overriding commands for target `types.h'
Makefile:234: warning: ignoring old commands for target `types.h'
make[4]: Nothing to be done for `all-am'.
make[4]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[3]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[3]: Entering directory `/home/daniel/libast/src/libast-0.7/include'
make[3]: Nothing to be done for `all-am'.
make[3]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
Making all in src
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/src'
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT array.lo -MD -MP -MF ".deps/array.Tpo" -c -o array.lo array.c; \
then mv -f ".deps/array.Tpo" ".deps/array.Plo"; else rm -f ".deps/array.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT array.lo -MD -MP -MF .deps/array.Tpo -c array.c -fPIC -DPIC -o .libs/array.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT array.lo -MD -MP -MF .deps/array.Tpo -c array.c -o array.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT builtin_hashes.lo -MD -MP -MF ".deps/builtin_hashes.Tpo" -c -o builtin_hashes.lo builtin_hashes.c; \
then mv -f ".deps/builtin_hashes.Tpo" ".deps/builtin_hashes.Plo"; else rm -f ".deps/builtin_hashes.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT builtin_hashes.lo -MD -MP -MF .deps/builtin_hashes.Tpo -c builtin_hashes.c -fPIC -DPIC -o .libs/builtin_hashes.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT builtin_hashes.lo -MD -MP -MF .deps/builtin_hashes.Tpo -c builtin_hashes.c -o builtin_hashes.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT conf.lo -MD -MP -MF ".deps/conf.Tpo" -c -o conf.lo conf.c; \
then mv -f ".deps/conf.Tpo" ".deps/conf.Plo"; else rm -f ".deps/conf.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT conf.lo -MD -MP -MF .deps/conf.Tpo -c conf.c -fPIC -DPIC -o .libs/conf.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT conf.lo -MD -MP -MF .deps/conf.Tpo -c conf.c -o conf.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT debug.lo -MD -MP -MF ".deps/debug.Tpo" -c -o debug.lo debug.c; \
then mv -f ".deps/debug.Tpo" ".deps/debug.Plo"; else rm -f ".deps/debug.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT debug.lo -MD -MP -MF .deps/debug.Tpo -c debug.c -fPIC -DPIC -o .libs/debug.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT debug.lo -MD -MP -MF .deps/debug.Tpo -c debug.c -o debug.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT dlinked_list.lo -MD -MP -MF ".deps/dlinked_list.Tpo" -c -o dlinked_list.lo dlinked_list.c; \
then mv -f ".deps/dlinked_list.Tpo" ".deps/dlinked_list.Plo"; else rm -f ".deps/dlinked_list.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT dlinked_list.lo -MD -MP -MF .deps/dlinked_list.Tpo -c dlinked_list.c -fPIC -DPIC -o .libs/dlinked_list.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT dlinked_list.lo -MD -MP -MF .deps/dlinked_list.Tpo -c dlinked_list.c -o dlinked_list.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT file.lo -MD -MP -MF ".deps/file.Tpo" -c -o file.lo file.c; \
then mv -f ".deps/file.Tpo" ".deps/file.Plo"; else rm -f ".deps/file.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT file.lo -MD -MP -MF .deps/file.Tpo -c file.c -fPIC -DPIC -o .libs/file.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT file.lo -MD -MP -MF .deps/file.Tpo -c file.c -o file.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT linked_list.lo -MD -MP -MF ".deps/linked_list.Tpo" -c -o linked_list.lo linked_list.c; \
then mv -f ".deps/linked_list.Tpo" ".deps/linked_list.Plo"; else rm -f ".deps/linked_list.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT linked_list.lo -MD -MP -MF .deps/linked_list.Tpo -c linked_list.c -fPIC -DPIC -o .libs/linked_list.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT linked_list.lo -MD -MP -MF .deps/linked_list.Tpo -c linked_list.c -o linked_list.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mbuff.lo -MD -MP -MF ".deps/mbuff.Tpo" -c -o mbuff.lo mbuff.c; \
then mv -f ".deps/mbuff.Tpo" ".deps/mbuff.Plo"; else rm -f ".deps/mbuff.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mbuff.lo -MD -MP -MF .deps/mbuff.Tpo -c mbuff.c -fPIC -DPIC -o .libs/mbuff.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mbuff.lo -MD -MP -MF .deps/mbuff.Tpo -c mbuff.c -o mbuff.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mem.lo -MD -MP -MF ".deps/mem.Tpo" -c -o mem.lo mem.c; \
then mv -f ".deps/mem.Tpo" ".deps/mem.Plo"; else rm -f ".deps/mem.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mem.lo -MD -MP -MF .deps/mem.Tpo -c mem.c -fPIC -DPIC -o .libs/mem.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mem.lo -MD -MP -MF .deps/mem.Tpo -c mem.c -o mem.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT msgs.lo -MD -MP -MF ".deps/msgs.Tpo" -c -o msgs.lo msgs.c; \
then mv -f ".deps/msgs.Tpo" ".deps/msgs.Plo"; else rm -f ".deps/msgs.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT msgs.lo -MD -MP -MF .deps/msgs.Tpo -c msgs.c -fPIC -DPIC -o .libs/msgs.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT msgs.lo -MD -MP -MF .deps/msgs.Tpo -c msgs.c -o msgs.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT obj.lo -MD -MP -MF ".deps/obj.Tpo" -c -o obj.lo obj.c; \
then mv -f ".deps/obj.Tpo" ".deps/obj.Plo"; else rm -f ".deps/obj.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT obj.lo -MD -MP -MF .deps/obj.Tpo -c obj.c -fPIC -DPIC -o .libs/obj.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT obj.lo -MD -MP -MF .deps/obj.Tpo -c obj.c -o obj.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT objpair.lo -MD -MP -MF ".deps/objpair.Tpo" -c -o objpair.lo objpair.c; \
then mv -f ".deps/objpair.Tpo" ".deps/objpair.Plo"; else rm -f ".deps/objpair.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT objpair.lo -MD -MP -MF .deps/objpair.Tpo -c objpair.c -fPIC -DPIC -o .libs/objpair.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT objpair.lo -MD -MP -MF .deps/objpair.Tpo -c objpair.c -o objpair.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT options.lo -MD -MP -MF ".deps/options.Tpo" -c -o options.lo options.c; \
then mv -f ".deps/options.Tpo" ".deps/options.Plo"; else rm -f ".deps/options.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT options.lo -MD -MP -MF .deps/options.Tpo -c options.c -fPIC -DPIC -o .libs/options.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT options.lo -MD -MP -MF .deps/options.Tpo -c options.c -o options.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT regexp.lo -MD -MP -MF ".deps/regexp.Tpo" -c -o regexp.lo regexp.c; \
then mv -f ".deps/regexp.Tpo" ".deps/regexp.Plo"; else rm -f ".deps/regexp.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT regexp.lo -MD -MP -MF .deps/regexp.Tpo -c regexp.c -fPIC -DPIC -o .libs/regexp.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT regexp.lo -MD -MP -MF .deps/regexp.Tpo -c regexp.c -o regexp.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT socket.lo -MD -MP -MF ".deps/socket.Tpo" -c -o socket.lo socket.c; \
then mv -f ".deps/socket.Tpo" ".deps/socket.Plo"; else rm -f ".deps/socket.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c socket.c -fPIC -DPIC -o .libs/socket.o
socket.c: In function 'spif_url_get_portnum':
socket.c:763: warning: cast from pointer to integer of different size
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c socket.c -o socket.o >/dev/null 2>&1
/bin/sh ../libtool --mode=link --tag=CC gcc -march=i686 -mtune=generic -O2 -pipe -L/usr/lib -o libast.la -rpath /usr/lib -version-info 2:1:0 array.lo builtin_hashes.lo conf.lo debug.lo dlinked_list.lo file.lo linked_list.lo mbuff.lo mem.lo msgs.lo obj.lo objpair.lo options.lo regexp.lo socket.lo str.lo strings.lo snprintf.lo tok.lo url.lo -L/usr/lib -lImlib2 -lfreetype -lz -L/usr/X11R6/lib -lX11 -lXext -ldl -lm -lSM -lICE -lpcre
rm -fr .libs/libast.so .libs/libast.so.2 .libs/libast.so.2.0.1
gcc -shared .libs/array.o .libs/builtin_hashes.o .libs/conf.o .libs/debug.o .libs/dlinked_list.o .libs/file.o .libs/linked_list.o .libs/mbuff.o .libs/mem.o .libs/msgs.o .libs/obj.o .libs/objpair.o .libs/options.o .libs/regexp.o .libs/socket.o .libs/str.o .libs/strings.o .libs/snprintf.o .libs/tok.o .libs/url.o -L/usr/lib -lImlib2 -lfreetype -lz -L/usr/X11R6/lib -lX11 -lXext -ldl -lm -lSM -lICE -lpcre -march=i686 -mtune=generic -Wl,-soname -Wl,libast.so.2 -o .libs/libast.so.2.0.1
(cd .libs && rm -f libast.so.2 && ln -s libast.so.2.0.1 libast.so.2)
(cd .libs && rm -f libast.so && ln -s libast.so.2.0.1 libast.so)
ar cru .libs/libast.a array.o builtin_hashes.o conf.o debug.o dlinked_list.o file.o linked_list.o mbuff.o mem.o msgs.o obj.o objpair.o options.o regexp.o socket.o str.o strings.o snprintf.o tok.o url.o
ranlib .libs/libast.a
creating libast.la
(cd .libs && rm -f libast.la && ln -s ../libast.la libast.la)
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/src'
Making all in test
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/test'
make[2]: Nothing to be done for `all'.
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/test'
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7'
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7'
make[1]: Leaving directory `/home/daniel/libast/src/libast-0.7'
Making install in include
make[1]: Entering directory `/home/daniel/libast/src/libast-0.7/include'
Making install in libast
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/include/libast'
Makefile:425: warning: overriding commands for target `types.h'
Makefile:234: warning: ignoring old commands for target `types.h'
make[3]: Entering directory `/home/daniel/libast/src/libast-0.7/include/libast'
Makefile:425: warning: overriding commands for target `types.h'
Makefile:234: warning: ignoring old commands for target `types.h'
make install-exec-hook
make[4]: Entering directory `/home/daniel/libast/src/libast-0.7/include/libast'
Makefile:425: warning: overriding commands for target `types.h'
Makefile:234: warning: ignoring old commands for target `types.h'
/bin/sh ../../mkinstalldirs /home/daniel/libast/pkg/usr/include/libast
for i in array.h avl_tree.h dlinked_list.h iterator_if.h linked_list.h list_if.h map_if.h mbuff.h obj.h objpair.h regexp.h socket.h str.h sysdefs.h tok.h types.h url.h vector_if.h ; do \
/bin/install -c -m 644 ./$i /home/daniel/libast/pkg/usr/include/libast/ ; \
done
make[4]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/include'
make[3]: Entering directory `/home/daniel/libast/src/libast-0.7/include'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/home/daniel/libast/pkg/usr/include" || mkdir -p -- "/home/daniel/libast/pkg/usr/include"
/bin/install -c -m 644 'libast.h' '/home/daniel/libast/pkg/usr/include/libast.h'
make[3]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
make[1]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
Making install in src
make[1]: Entering directory `/home/daniel/libast/src/libast-0.7/src'
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/src'
test -z "/home/daniel/libast/pkg/usr/lib" || mkdir -p -- "/home/daniel/libast/pkg/usr/lib"
/bin/sh ../libtool --mode=install /bin/install -c 'libast.la' '/home/daniel/libast/pkg/usr/lib/libast.la'
/bin/install -c .libs/libast.so.2.0.1 /home/daniel/libast/pkg/usr/lib/libast.so.2.0.1
(cd /home/daniel/libast/pkg/usr/lib && rm -f libast.so.2 && ln -s libast.so.2.0.1 libast.so.2)
(cd /home/daniel/libast/pkg/usr/lib && rm -f libast.so && ln -s libast.so.2.0.1 libast.so)
/bin/install -c .libs/libast.lai /home/daniel/libast/pkg/usr/lib/libast.la
/bin/install -c .libs/libast.a /home/daniel/libast/pkg/usr/lib/libast.a
ranlib /home/daniel/libast/pkg/usr/lib/libast.a
chmod 644 /home/daniel/libast/pkg/usr/lib/libast.a
libtool: install: warning: remember to run `libtool --finish /usr/lib'
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/src'
make[1]: Leaving directory `/home/daniel/libast/src/libast-0.7/src'
Making install in test
make[1]: Entering directory `/home/daniel/libast/src/libast-0.7/test'
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/test'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/test'
make[1]: Leaving directory `/home/daniel/libast/src/libast-0.7/test'
make[1]: Entering directory `/home/daniel/libast/src/libast-0.7'
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7'
test -z "/home/daniel/libast/pkg/usr/bin" || mkdir -p -- "/home/daniel/libast/pkg/usr/bin"
/bin/install -c 'libast-config' '/home/daniel/libast/pkg/usr/bin/libast-config'
make install-data-hook
make[3]: Entering directory `/home/daniel/libast/src/libast-0.7'
/bin/sh ./mkinstalldirs /home/daniel/libast/pkg/usr/share/aclocal
mkdir /home/daniel/libast/pkg/usr/share/aclocal
for i in libast.m4 ; do \
/bin/install -c -m 644 ./$i /home/daniel/libast/pkg/usr/share/aclocal/ ; \
done
make[3]: Leaving directory `/home/daniel/libast/src/libast-0.7'
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7'
make[1]: Leaving directory `/home/daniel/libast/src/libast-0.7'
install: cannot stat `LICENSE.txt': No such file or directory
daniel/libast/pkg/usr
mkdir /home/daniel/libast/pkg/usr/include
mkdir /home/daniel/libast/pkg/usr/include/libast
for i in array.h avl_tree.h dlinked_list.h iterator_if.h linked_list.h list_if.h map_if.h mbuff.h obj.h objpair.h regexp.h socket.h str.h sysdefs.h tok.h types.h url.h vector_if.h ; do \
/bin/install -c -m 644 ./$i /home/daniel/libast/pkg/usr/include/libast/ ; \
done
make[4]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/include/libast'
make[2]: Entering directory `/home/daniel/libast/src/libast-0.7/include'
make[3]: Entering directory `/home/daniel/libast/src/libast-0.7/include'
make[3]: Nothing to be done for `install-exec-am'.
test -z "/home/daniel/libast/pkg/usr/include" || mkdir -p -- "/home/daniel/libast/pkg/usr/include"
/bin/install -c -m 644 'libast.h' '/home/daniel/libast/pkg/usr/include/libast.h'
make[3]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
make[2]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
make[1]: Leaving directory `/home/daniel/libast/src/libast-0.7/include'
Making install in src
make[1]: Entering directory `/home/daniel/libast/src/libast-0.7/src'
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT array.lo -MD -MP -MF ".deps/array.Tpo" -c -o array.lo array.c; \
then mv -f ".deps/array.Tpo" ".deps/array.Plo"; else rm -f ".deps/array.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT array.lo -MD -MP -MF .deps/array.Tpo -c array.c -fPIC -DPIC -o .libs/array.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT array.lo -MD -MP -MF .deps/array.Tpo -c array.c -o array.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT builtin_hashes.lo -MD -MP -MF ".deps/builtin_hashes.Tpo" -c -o builtin_hashes.lo builtin_hashes.c; \
then mv -f ".deps/builtin_hashes.Tpo" ".deps/builtin_hashes.Plo"; else rm -f ".deps/builtin_hashes.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT builtin_hashes.lo -MD -MP -MF .deps/builtin_hashes.Tpo -c builtin_hashes.c -fPIC -DPIC -o .libs/builtin_hashes.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT builtin_hashes.lo -MD -MP -MF .deps/builtin_hashes.Tpo -c builtin_hashes.c -o builtin_hashes.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT conf.lo -MD -MP -MF ".deps/conf.Tpo" -c -o conf.lo conf.c; \
then mv -f ".deps/conf.Tpo" ".deps/conf.Plo"; else rm -f ".deps/conf.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT conf.lo -MD -MP -MF .deps/conf.Tpo -c conf.c -fPIC -DPIC -o .libs/conf.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT conf.lo -MD -MP -MF .deps/conf.Tpo -c conf.c -o conf.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT debug.lo -MD -MP -MF ".deps/debug.Tpo" -c -o debug.lo debug.c; \
then mv -f ".deps/debug.Tpo" ".deps/debug.Plo"; else rm -f ".deps/debug.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT debug.lo -MD -MP -MF .deps/debug.Tpo -c debug.c -fPIC -DPIC -o .libs/debug.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT debug.lo -MD -MP -MF .deps/debug.Tpo -c debug.c -o debug.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT dlinked_list.lo -MD -MP -MF ".deps/dlinked_list.Tpo" -c -o dlinked_list.lo dlinked_list.c; \
then mv -f ".deps/dlinked_list.Tpo" ".deps/dlinked_list.Plo"; else rm -f ".deps/dlinked_list.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT dlinked_list.lo -MD -MP -MF .deps/dlinked_list.Tpo -c dlinked_list.c -fPIC -DPIC -o .libs/dlinked_list.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT dlinked_list.lo -MD -MP -MF .deps/dlinked_list.Tpo -c dlinked_list.c -o dlinked_list.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT file.lo -MD -MP -MF ".deps/file.Tpo" -c -o file.lo file.c; \
then mv -f ".deps/file.Tpo" ".deps/file.Plo"; else rm -f ".deps/file.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT file.lo -MD -MP -MF .deps/file.Tpo -c file.c -fPIC -DPIC -o .libs/file.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT file.lo -MD -MP -MF .deps/file.Tpo -c file.c -o file.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT linked_list.lo -MD -MP -MF ".deps/linked_list.Tpo" -c -o linked_list.lo linked_list.c; \
then mv -f ".deps/linked_list.Tpo" ".deps/linked_list.Plo"; else rm -f ".deps/linked_list.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT linked_list.lo -MD -MP -MF .deps/linked_list.Tpo -c linked_list.c -fPIC -DPIC -o .libs/linked_list.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT linked_list.lo -MD -MP -MF .deps/linked_list.Tpo -c linked_list.c -o linked_list.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mbuff.lo -MD -MP -MF ".deps/mbuff.Tpo" -c -o mbuff.lo mbuff.c; \
then mv -f ".deps/mbuff.Tpo" ".deps/mbuff.Plo"; else rm -f ".deps/mbuff.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mbuff.lo -MD -MP -MF .deps/mbuff.Tpo -c mbuff.c -fPIC -DPIC -o .libs/mbuff.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mbuff.lo -MD -MP -MF .deps/mbuff.Tpo -c mbuff.c -o mbuff.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mem.lo -MD -MP -MF ".deps/mem.Tpo" -c -o mem.lo mem.c; \
then mv -f ".deps/mem.Tpo" ".deps/mem.Plo"; else rm -f ".deps/mem.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mem.lo -MD -MP -MF .deps/mem.Tpo -c mem.c -fPIC -DPIC -o .libs/mem.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT mem.lo -MD -MP -MF .deps/mem.Tpo -c mem.c -o mem.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT msgs.lo -MD -MP -MF ".deps/msgs.Tpo" -c -o msgs.lo msgs.c; \
then mv -f ".deps/msgs.Tpo" ".deps/msgs.Plo"; else rm -f ".deps/msgs.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT msgs.lo -MD -MP -MF .deps/msgs.Tpo -c msgs.c -fPIC -DPIC -o .libs/msgs.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT msgs.lo -MD -MP -MF .deps/msgs.Tpo -c msgs.c -o msgs.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT obj.lo -MD -MP -MF ".deps/obj.Tpo" -c -o obj.lo obj.c; \
then mv -f ".deps/obj.Tpo" ".deps/obj.Plo"; else rm -f ".deps/obj.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT obj.lo -MD -MP -MF .deps/obj.Tpo -c obj.c -fPIC -DPIC -o .libs/obj.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT obj.lo -MD -MP -MF .deps/obj.Tpo -c obj.c -o obj.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT objpair.lo -MD -MP -MF ".deps/objpair.Tpo" -c -o objpair.lo objpair.c; \
then mv -f ".deps/objpair.Tpo" ".deps/objpair.Plo"; else rm -f ".deps/objpair.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT objpair.lo -MD -MP -MF .deps/objpair.Tpo -c objpair.c -fPIC -DPIC -o .libs/objpair.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT objpair.lo -MD -MP -MF .deps/objpair.Tpo -c objpair.c -o objpair.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT options.lo -MD -MP -MF ".deps/options.Tpo" -c -o options.lo options.c; \
then mv -f ".deps/options.Tpo" ".deps/options.Plo"; else rm -f ".deps/options.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT options.lo -MD -MP -MF .deps/options.Tpo -c options.c -fPIC -DPIC -o .libs/options.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT options.lo -MD -MP -MF .deps/options.Tpo -c options.c -o options.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT regexp.lo -MD -MP -MF ".deps/regexp.Tpo" -c -o regexp.lo regexp.c; \
then mv -f ".deps/regexp.Tpo" ".deps/regexp.Plo"; else rm -f ".deps/regexp.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT regexp.lo -MD -MP -MF .deps/regexp.Tpo -c regexp.c -fPIC -DPIC -o .libs/regexp.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT regexp.lo -MD -MP -MF .deps/regexp.Tpo -c regexp.c -o regexp.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT socket.lo -MD -MP -MF ".deps/socket.Tpo" -c -o socket.lo socket.c; \
then mv -f ".deps/socket.Tpo" ".deps/socket.Plo"; else rm -f ".deps/socket.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c socket.c -fPIC -DPIC -o .libs/socket.o
socket.c: In function 'spif_url_get_portnum':
socket.c:763: warning: cast from pointer to integer of different size
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT socket.lo -MD -MP -MF .deps/socket.Tpo -c socket.c -o socket.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT str.lo -MD -MP -MF ".deps/str.Tpo" -c -o str.lo str.c; \
then mv -f ".deps/str.Tpo" ".deps/str.Plo"; else rm -f ".deps/str.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT str.lo -MD -MP -MF .deps/str.Tpo -c str.c -fPIC -DPIC -o .libs/str.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT str.lo -MD -MP -MF .deps/str.Tpo -c str.c -o str.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT strings.lo -MD -MP -MF ".deps/strings.Tpo" -c -o strings.lo strings.c; \
then mv -f ".deps/strings.Tpo" ".deps/strings.Plo"; else rm -f ".deps/strings.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT strings.lo -MD -MP -MF .deps/strings.Tpo -c strings.c -fPIC -DPIC -o .libs/strings.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT strings.lo -MD -MP -MF .deps/strings.Tpo -c strings.c -o strings.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT tok.lo -MD -MP -MF ".deps/tok.Tpo" -c -o tok.lo tok.c; \
then mv -f ".deps/tok.Tpo" ".deps/tok.Plo"; else rm -f ".deps/tok.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT tok.lo -MD -MP -MF .deps/tok.Tpo -c tok.c -fPIC -DPIC -o .libs/tok.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT tok.lo -MD -MP -MF .deps/tok.Tpo -c tok.c -o tok.o >/dev/null 2>&1
if /bin/sh ../libtool --mode=compile --tag=CC gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT url.lo -MD -MP -MF ".deps/url.Tpo" -c -o url.lo url.c; \
then mv -f ".deps/url.Tpo" ".deps/url.Plo"; else rm -f ".deps/url.Tpo"; exit 1; fi
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT url.lo -MD -MP -MF .deps/url.Tpo -c url.c -fPIC -DPIC -o .libs/url.o
gcc -DHAVE_CONFIG_H -I. -I. -I.. -I../include/libast -I../include -I../include/libast -I/usr/include -march=i686 -mtune=generic -O2 -pipe -MT url.lo -MD -MP -MF .deps/url.Tpo -c url.c -o url.o >/dev/null 2>&1
/bin/sh ../libtool --mode=link --tag=CC gcc -march=i686 -mtune=generic -O2 -pipe -L/usr/lib -o libast.la -rpath /home/daniel/libast/pkg/usr/lib -version-info 2:1:0 array.lo builtin_hashes.lo conf.lo debug.lo dlinked_list.lo file.lo linked_list.lo mbuff.lo mem.lo msgs.lo obj.lo objpair.lo options.lo regexp.lo socket.lo str.lo strings.lo snprintf.lo tok.lo url.lo -L/usr/lib -lImlib2 -lfreetype -lz -L/usr/X11R6/lib -lX11 -lXext -ldl -lm -lSM -lICE -lpcre
rm -fr .libs/libast.a .libs/libast.la .libs/libast.lai .libs/libast.so .libs/libast.so.2 .libs/libast.so.2.0.1
gcc -shared .libs/array.o .libs/builtin_hashes.o .libs/conf.o .libs/debug.o .libs/dlinked_list.o .libs/file.o .libs/linked_list.o .libs/mbuff.o .libs/mem.o .libs/msgs.o .libs/obj.o .libs/objpair.o .libs/options.o .libs/regexp.o .libs/socket.o .libs/str.o .libs/strings.o .libs/snprintf.o .libs/tok.o .libs/url.o -L/usr/lib -lImlib2 -lfreetype -lz -L/usr/X11R6/lib -lX11 -lXext -ldl -lm -lSM -lICE -lpcre -march=i686 -mtune=generic -Wl,-soname -Wl,libast.so.2 -o .libs/libast.so.2.0.1
(cd .libs && rm -f libast.so.2 && ln -s libast.so.2.0.1 libast.so.2)
(cd .libs && rm -f libast.so && ln -s libast.so.2.0.1 libast.so)
ar cru .libs/libast.a array.o builtin_hashes.o conf.o debug.o dlinked_list.o file.o linked_list.o mbuff.o mem.o msgs.o obj.o objpair.o options.o regexp.o socket.o str.o strings.o snprintf.o tok.o url.o
ar: conf.o: No such file or directory
make[1]: *** [libast.la] Error 1
make[1]: Leaving directory `/home/daniel/libast/src/libast-0.7/src'
make: *** [install-recursive] Error 1
install: cannot stat `LICENSE.txt': No such file or directory
The LICENSE.txt do however exist in the libast directory.
I have tried google and the searchfunction here at the forum, but I still can't find the answer.
Hope you'll be able to help me.
Cheers :)
Last edited by fluxme (2007-12-13 22:51:56)Your problem is here...
ar: conf.o: No such file or directory
So it seems this no longer compiles using the PKGBUILD. Eterm does not have a maintainer so it looks like you are on your own here. You could look at another distribution to see if they have a patch to fix this. -
Error installing 2.4.13 with db-4.7.25
I get the following error, which seems to show the configure script getting a goofed-up value for DB version: "4.6\n4.7":
sh buildall.sh enable-java with-tcl=/path/to/x86-64-linux/tcl/lib with-junit=/path/to/x86-64-linux/lib/junit-4.4.jar enable-perl with-berkeleydb-prefix=/path/to/x86-64-linux/db-4.7.25 -b 64 prefix=/path/to/x86-64-linux/dbxml-2.4.13 --build-one=dbxml
checking if --with-berkeleydb=DIR option specified... /path/to/x86-64-linux/dbxml-2.4.13
checking for Berkeley DB version from install tree... 4.6
4.7
configure: error: /path/to/x86-64-linux/dbxml-2.4.13 is version 4.6
4.7, which is not a supported version of Berkeley DB. The version must be at least 4.3
YorickFirst of all, thank you for the reply.
Undertood I've downloaded the newer version and it installed fine.
Thanks a lot! -
Error installing tuxedo12.1.1 32-bit on AIX7.1
I'm getting this error installing Tuxedo12.1.1 on AIX
I'm logged in via XTerm to AIX machine. (Used same method/login as when i installed Oracle12c DB client)
Is "oui/instImages/images.properties" Not part of my Oracle database install?
can I copy file from Oracle11.1 or does it need to be installed?
$ cd install
$ ls
addLangs.sh oneclick.properties runInstaller
attachHome.sh oraparam.ini runSSHSetup.sh
clusterparam.ini oraparam.ini.orig unzip
detachHome.sh oraparamsilent.ini
lsnodes resource
$ ./runInstaller
Starting Oracle Universal Installer...
Checking swap space: must be greater than 500 MB. Actual 4096 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 256 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2014-12-15_11-29-23AM. Please wait ...$ Oracle Universal Installer, Version 12.1.0.1.0 Production
Copyright (C) 1999, 2013, Oracle. All rights reserved.
java.io.FileNotFoundException: /tmp/OraInstall2014-12-15_11-29-23AM/oui/instImages/images.properties (No such file or directory)
at java.io.FileInputStream.<init>(FileInputStream.java:137)
at java.io.FileInputStream.<init>(FileInputStream.java:96)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.loadProperties(OiifmSp
lashScreen.java:490)
at oracle.sysman.oii.oiif.oiifm.OiifmSplashScreen.<clinit>(OiifmSplashSc
reen.java:95)
at java.lang.J9VMInternals.initializeImpl(Native Method)
at java.lang.J9VMInternals.initialize(J9VMInternals.java:200)
at oracle.sysman.oii.oiif.oiifm.OiifmGraphicInterfaceManager.<init>(Oiif
mGraphicInterfaceManager.java:280)
at java.lang.J9VMInternals.newInstanceImpl(Native Method)
at java.lang.Class.newInstance(Class.java:1474)Well...seems some time now, but here goes :
Firstly, your installation should work with the free MS VC++ Express Edition which is free, at least mine did.
Secondly, there is NO Free / Trial version of MKS Developers (as I think its called now) or ToolKit (as widely known), but there is a bit of good news, there is an alternative now in Cygwin which is free, and you can download this at http://www.cygwin.com , however, you have to read the Metalink document regarding this, as the installation of all its component is not advised, so you have to know the right utilities to include as options during installation
Thirdly, if you attempt staging with the adautostage.pl ( The perl script for staging an area for the installation files) it does not matter which you unzip first. This script arranges the installation folders as intended by Oracle.
If you have further queries, let us know.
Good Luck -
Hi, I have browesed the forums many a time and found answers to my questions but this one I have yet to find. Recently I cannot upgrade any apple related software. I am running the last gen G4 Powerbook(10.4.8). Today I tried to install the new iTunes 7.1 i belive. It will download fine but will not install. I tried from the site and the apple updater. Turns out that there were three updates(iTunes, QuickTime, and ProAppRuntime) from apple and non could install. All gave me a error installing software. I had also tried installing MatLab for use in one of my courses earlier this month and got the same result. I have repaired my permissions, somthing i do quite regulalry through use of a automater script. Now since these arnt must have upgrades im not overly worried about them, im more worried about not being able to upgrade somthing Key later down the road.
ThanksDo you have a retail Leopard disc that you can use to install with?
You can also try installing 10.4 using Target Disk Mode.
Please post back with results, -
'There were errors installing the software. Please try installing again.'
Can anyone provide a solution for a sudden problem I've encountered. It began when trying to install Backup 3.1 and has now been repeated with OS X 10.4.5.
When trying through Software Update I'm told The update [packagename] can't be installed. Sorry, an unexpected error occurred. The Installer package has been moved to the Trash. To try again, open the package from the Finder.
When I try opening the Installer packages from the Finder the Installer reaches the stage of 'preparing target volume' and then displays this error: There were errors installing the software. Please try installing again.
Installer's Error Log says: Install failed: The following install step failed: run preflight script for [packagename].
Console.log contains this:2006-02-15 21:07:27.431 Software Update[331] session:product:061-2046 didFailWithError:NSError "Error SUSessionErrorDomain 6" Domain=SUSessionErrorDomain Code=6 UserInfo={errorCode = -2; }
Unsuccessful steps I've taken to resolve this issue have been: (1) I trashed com.apple.installer.plist, (2) I repaired disk persmissions; (3) I repaired the disk (when I did so, Disk Utility reported that no repairs were necessary); (4) I restarted in Safe Mode; and (5) I tried installing using a different User account.
Anyone?Since first posting, I learned of further updates being available in Software Update (all the iLife '06 suite, basically). Horrified, I suspected that my Installer problem would rear its ugly head again with these, and sure enough that's precisely what happened. As a test, I unchecked all but one of the new items in Software Update and tried installing that. The exact same problem reoccurred.
Fortunately I also have an iBook G4 on which I had earlier run a successful upgrade to OS X 10.4.5. I ran Software Update on that machine, installed everything successfully, and then used Target Disk mode between iBook and iMac to first install 10.4.5 on the iMac and then to copy over the new versions of Backup, iDVD, iMovie, iPhoto, iTunes and iWeb. So my iMac is now up to date, but only by intervention of another machine. My original question remains: what could be causing the problem with Installer?
Thanks Jpfresno for your response. The only part of it which I had not tried was disconnecting my external Firewire HD before running Installer. -
Error Installing Exchange 2013 CU6
setup startup give me this error
Method 'get_MultifactorRegistrationEnabled' in type 'Microsoft.Exchange.Data.Directory.SystemConfiguration.PushNotificationApp' from assembly 'Microsoft.Exchange.Data.Directory, Version=15.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' does
not have an implementation.
Have you any suggestion to solve it?Here the result!
Display Name Name Install State
[X] Active Directory Domain Services AD-Domain-Services Installed
[X] Application Server Application-Server Installed
[X] .NET Framework 4.5 AS-NET-Framework Installed
[X] Windows Process Activation Service Support AS-WAS-Support Installed
[X] HTTP Activation AS-HTTP-Activation Installed
[X] DHCP Server DHCP Installed
[X] DNS Server DNS Installed
[X] Fax Server Fax Installed
[X] File And Storage Services FileAndStorage-Services Installed
[X] File and iSCSI Services File-Services Installed
[X] File Server FS-FileServer Installed
[X] Storage Services Storage-Services Installed
[X] Print and Document Services Print-Services Installed
[X] Print Server Print-Server Installed
[X] Internet Printing Print-Internet Installed
[X] Remote Access RemoteAccess Installed
[X] DirectAccess and VPN (RAS) DirectAccess-VPN Installed
[X] Routing Routing Installed
[X] Web Server (IIS) Web-Server Installed
[X] Web Server Web-WebServer Installed
[X] Common HTTP Features Web-Common-Http Installed
[X] Default Document Web-Default-Doc Installed
[X] Directory Browsing Web-Dir-Browsing Installed
[X] HTTP Errors Web-Http-Errors Installed
[X] Static Content Web-Static-Content Installed
[X] HTTP Redirection Web-Http-Redirect Installed
[X] WebDAV Publishing Web-DAV-Publishing Installed
[X] Health and Diagnostics Web-Health Installed
[X] HTTP Logging Web-Http-Logging Installed
[X] Custom Logging Web-Custom-Logging Installed
[X] Logging Tools Web-Log-Libraries Installed
[X] ODBC Logging Web-ODBC-Logging Installed
[X] Request Monitor Web-Request-Monitor Installed
[X] Tracing Web-Http-Tracing Installed
[X] Performance Web-Performance Installed
[X] Static Content Compression Web-Stat-Compression Installed
[X] Dynamic Content Compression Web-Dyn-Compression Installed
[X] Security Web-Security Installed
[X] Request Filtering Web-Filtering Installed
[X] Basic Authentication Web-Basic-Auth Installed
[X] Centralized SSL Certificate Support Web-CertProvider Installed
[X] Client Certificate Mapping Authentic... Web-Client-Auth Installed
[X] Digest Authentication Web-Digest-Auth Installed
[X] IIS Client Certificate Mapping Authe... Web-Cert-Auth Installed
[X] IP and Domain Restrictions Web-IP-Security Installed
[X] URL Authorization Web-Url-Auth Installed
[X] Windows Authentication Web-Windows-Auth Installed
[X] Application Development Web-App-Dev Installed
[X] .NET Extensibility 4.5 Web-Net-Ext45 Installed
[X] ASP Web-ASP Installed
[X] ASP.NET 4.5 Web-Asp-Net45 Installed
[X] CGI Web-CGI Installed
[X] ISAPI Extensions Web-ISAPI-Ext Installed
[X] ISAPI Filters Web-ISAPI-Filter Installed
[X] FTP Server Web-Ftp-Server Installed
[X] FTP Service Web-Ftp-Service Installed
[X] FTP Extensibility Web-Ftp-Ext Installed
[X] IIS Hostable Web Core Web-WHC Installed
[X] Management Tools Web-Mgmt-Tools Installed
[X] IIS Management Console Web-Mgmt-Console Installed
[X] IIS 6 Management Compatibility Web-Mgmt-Compat Installed
[X] IIS 6 Metabase Compatibility Web-Metabase Installed
[X] IIS 6 Management Console Web-Lgcy-Mgmt-Console Installed
[X] IIS 6 Scripting Tools Web-Lgcy-Scripting Installed
[X] IIS 6 WMI Compatibility Web-WMI Installed
[X] IIS Management Scripts and Tools Web-Scripting-Tools Installed
[X] Management Service Web-Mgmt-Service Installed
[X] .NET Framework 3.5 Features NET-Framework-Features Installed
[X] .NET Framework 3.5 (includes .NET 2.0 and 3.0) NET-Framework-Core Installed
[X] .NET Framework 4.5 Features NET-Framework-45-Fea... Installed
[X] .NET Framework 4.5 NET-Framework-45-Core Installed
[X] ASP.NET 4.5 NET-Framework-45-ASPNET Installed
[X] WCF Services NET-WCF-Services45 Installed
[X] HTTP Activation NET-WCF-HTTP-Activat... Installed
[X] Message Queuing (MSMQ) Activation NET-WCF-MSMQ-Activat... Installed
[X] Named Pipe Activation NET-WCF-Pipe-Activat... Installed
[X] TCP Activation NET-WCF-TCP-Activati... Installed
[X] TCP Port Sharing NET-WCF-TCP-PortShar... Installed
[X] Group Policy Management GPMC Installed
[X] Ink and Handwriting Services InkAndHandwritingSer... Installed
[X] Media Foundation Server-Media-Foundation Installed
[X] Message Queuing MSMQ Installed
[X] Message Queuing Services MSMQ-Services Installed
[X] Message Queuing Server MSMQ-Server Installed
[X] RAS Connection Manager Administration Kit (CMAK) CMAK Installed
[X] Remote Server Administration Tools RSAT Installed
[X] Feature Administration Tools RSAT-Feature-Tools Installed
[X] Failover Clustering Tools RSAT-Clustering Installed
[X] Failover Cluster Management Tools RSAT-Clustering-Mgmt Installed
[X] Failover Cluster Module for Windows ... RSAT-Clustering-Powe... Installed
[X] Failover Cluster Command Interface RSAT-Clustering-CmdI... Installed
[X] WINS Server Tools RSAT-WINS Installed
[X] Role Administration Tools RSAT-Role-Tools Installed
[X] AD DS and AD LDS Tools RSAT-AD-Tools Installed
[X] Active Directory module for Windows ... RSAT-AD-PowerShell Installed
[X] AD DS Tools RSAT-ADDS Installed
[X] Active Directory Administrative ... RSAT-AD-AdminCenter Installed
[X] AD DS Snap-Ins and Command-Line ... RSAT-ADDS-Tools Installed
[X] DHCP Server Tools RSAT-DHCP Installed
[X] DNS Server Tools RSAT-DNS-Server Installed
[X] Fax Server Tools RSAT-Fax Installed
[X] Print and Document Services Tools RSAT-Print-Services Installed
[X] Remote Access Management Tools RSAT-RemoteAccess Installed
[X] Remote Access GUI and Command-Line T... RSAT-RemoteAccess-Mgmt Installed
[X] Remote Access module for Windows Pow... RSAT-RemoteAccess-Po... Installed
[X] RPC over HTTP Proxy RPC-over-HTTP-Proxy Installed
[X] Telnet Client Telnet-Client Installed
[X] User Interfaces and Infrastructure User-Interfaces-Infra Installed
[X] Graphical Management Tools and Infrastructure Server-Gui-Mgmt-Infra Installed
[X] Desktop Experience Desktop-Experience Installed
[X] Server Graphical Shell Server-Gui-Shell Installed
[X] Windows Identity Foundation 3.5 Windows-Identity-Fou... Installed
[X] Windows Internal Database Windows-Internal-Dat... Installed
[X] Windows PowerShell PowerShellRoot Installed
[X] Windows PowerShell 3.0 PowerShell Installed
[X] Windows PowerShell 2.0 Engine PowerShell-V2 Installed
[X] Windows PowerShell ISE PowerShell-ISE Installed
[X] Windows Process Activation Service WAS Installed
[X] Process Model WAS-Process-Model Installed
[X] Configuration APIs WAS-Config-APIs Installed
[X] Windows Server Backup Windows-Server-Backup Installed
[X] WINS Server WINS Installed
[X] WoW64 Support WoW64-Support Installed -
Error installing Adobe Flash 11 "launchfail" after enable AppLocker
Error installing Adobe Flash 11 "launchfail" after enable AppLocker please help. I have allow everyone from publisher for .exe and .msi
I'll ask around, but I don't have any experience with AppLocker. Have you gone through all of the documentation here?
http://technet.microsoft.com/en-us/library/dd723678(v=ws.10).aspx -
Hi,
I want to install SharePoint Foundation 2013 on a standalone server with SQL Express but I want to be able to name the content databases without their GUID references. Will I have to use an install script (AutoSPInstaller perhaps?) to achieve this?
Thanks.You can't do a standalone install if you want the alias (also if you plan to move the databases in the future)
You'll need to create the alias before you create the farm with the Configuration wizard or PowerShell so you can specify the alias. Whether you create the alias before or after installing SQL Express doesn't matter as long as it points to the instance.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights
Maybe you are looking for
-
MAJOR Zen Vision: M 30GB PROBLE
First, when trying to recover my computer after some problems, the software no longer worked with my ZEN. I didn't want to install another Service Pack and potentially lose everything else I had, so I just started using Windows Media Player to add mu
-
Webpage link problem in adobe acrobat 8 pro
Webpage links work fine locally. When I put these PDFs with webpage links online, they still work fine. After i combine PDFs as a package, webpage links only work fine locally. The links cannot open after i put the PDF package on our website. Pls giv
-
Permissions problem with a disk
My iMac's HD has 2 partitions, Macintosh HD and another one called Backups HD. If I copy files to the root of Backups HD it's fine, but if I try to add any files to any of the folders on the disk it asks me to authenticate and I have to enter my user
-
hello all , new to mac... went to change screensaver tonight and .... no Display in System Preferences, what have I inadvertently done??? Thanking you all in advance for any help!
-
Can somebody please tell me what to do when ants invade your ibook? Today I discovered black ants really love my clamshell. I was so angry. This is the first time I've experienced something like this and this is my second laptop! They were everywhere