Error installing certificate with Cisco 5508 7.4.110
hi All,
I am getting Error while installing the web certificate on a WLC.
(Cisco Controller) >transfer download start
Mode............................................. TFTP
Data Type........................................ Site Cert
TFTP Server IP................................... 10.225.5.11
TFTP Packet Timeout.............................. 6
TFTP Max Retries................................. 10
TFTP Path........................................ ./
TFTP Filename.................................... final-cert.pem
This may take some time.
Are you sure you want to start? (y/N) y
TFTP Webauth cert transfer starting.
TFTP receive complete... Installing Certificate.
Error installing certificate.
the Copy works fine but for some reason installation doesnt complete. I am having issues even with GUI mode.
Please let me know what is should do.
What I mean is that you can't take another customers certificate and load it onto another customers WLC. The certificate is assigned to a FQDN (Fully Qualified Domain Name) whcih will be a DNS entry for the customer who it was registered to, so you can't and shouldn't use it for any other client. You need to generate one certificate per client.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Similar Messages
-
Error installing certificate - help
Hi
I am trying to install a webauth certificate on a WLC (5508 6.0.188).
I followed the "Generate CSR for Third-Party Certificates and Download Unchained Certificates to the WLC" document.
But when I try to upload the .pem file i get "the" "error installing certificate" promt.
I did not have any errors using OpenSSL.
Is there any debug commands that can help clearify the issue.
The Solution provided in this discussion has been added in the following Blog:-
https://supportforums.cisco.com/community/netpro/wireless-mobility/security-network-management/blog/2011/11/26/generate-csr-for-third-party-cert-and-download-unchained-cert-on-wireless-lan-controller-wlcI was having the same problem and worked on it for probably 8 hours trying numerous different solutions and this is what fixed it for me.
The OpenSSL versions available from www.openssl.org do not create a final.pem that work with the WLC.
I downloaded OpenSSL using this link http://www.ingate.com/files/Win32OpenSSL-0.9.6-1.0.zip and installed into C:\OpenSSL (It tries to install to program files, install location doesn't matter I just like it on the root of C)
I then followed all of the steps outline on Cisco.com http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a00806e367a.shtml
Uploaded the final.pem file and it install without any problems.
My Cert was purchased from RapidSSL I don't know if that matters or not.
This was a renewal cert, so it was my second time install a cert to my WLC and I made the mistake of not keeping my original copy of OpenSSL that worked for me the first time. Don't make the mistake I made and KEEP a copy of the OpenSSL version that works for you. That will make cert renewal much easier for you. -
Help with Cisco 5508 management interface
Hello,
I'm trying to verify some behaviors I'm seeing with my 5508 controller setup and forgive me for missing anything obvious, I've zero experience with this hardware and clueless on the best practices. With that said... out of the box I ran through the AutoInstall process.
I gave my service port an IP address on my subnet, 10.10.8.0/24 vlan 100 and gave the management interface the ip address 10.10.30.5/24 vlan 130
From my host I can ping the management interace 10.10.30.5 and the interface gateway 10.10.30.1
I cannot connect to the controller via 10.10.30.5 either through the web GUI or telnet
I can connect to the controller via 10.10.8.200 both through the web interface and telnet
while connected to the service port, I can ping the management port IP but I cannot ping the 10.10.30.1 gateway.
We have attached two test 3502I AP's and they found the controller and pulled correct ip addresses, clients can authenticate and access network resources as well as the Internet so for the most part, things are working but it concerns me that the management interface can't ping its own gateway.
Keep in mind, I did no other configurations besides what got configured in the AutoInstall process. What should I look at to resolve?
Thanks!
MikeThe service port is for out of band management and should not be connected to the network. If connected tot he network, it should not have connectivity to the management interface of the wlc.
You can create an ACL to block the service port ip to the managment vlan if you want. I normally do not connect the service port to the network. -
I am installing a VeriSign certificate and I receive the message:
Unable to load or decode certificate file
Somebody can help me with this topic
ThanksHi ,
I dont know if you have followed the correct procedure as given here:
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html
Additionally 7.6 allows chained certificate and that too complete trust chain should be present.
You can try installing it on before 7.6 , like 7.4 and verify if it installs there with out any issue. If yes then your certificate is not completely chained.
Regards
Dhiresh -
Error installing netpanzer with packer.....
hi... i am struggling getting netpanzer to install... i originally tried to install using packer, however some of my aur packages were out of date, so it complained about an error which i fixed by updating my aur packages..... now my output is as follows;
[root@HPmachine /]# packer -S netpanzer
Aur Targets (1): netpanzer
Proceed with installation? [Y/n] y
Edit netpanzer PKGBUILD with $EDITOR? [Y/n] n
==> Making package: netpanzer 0.8.4-1 (Fri Jun 1 00:03:05 BST 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
==> Extracting Sources...
==> Removing existing pkg/ directory...
==> Starting build()...
svn: E155000: Destination directory exists; please remove the directory or use --force to overwrite
svn: E155000: 'netpanzer-0.8.4' already exists
==> ERROR: A failure occurred in build().
Aborting...
The build failed.
[root@HPmachine /]#
Last edited by ninjaprawn (2012-05-31 23:16:47)Gcool wrote:Don't use packer myself, but judging from the output it simply seems to be complaining that the "netpanzer-0.8.4" directory already exists in packer's temporary directory. Simply try removing the directory and then try again.
thanks for the advice.... did that, but now i get.......
Exported revision 1370.
scons: Reading SConscript files ...
scons: warning: The Options class is deprecated; use the Variables class instead.
File "/tmp/packerbuild-0/netpanzer/netpanzer/src/netpanzer-0.8.4/SConstruct", line 60, in <module>
scons: warning: BuildDir() and the build_dir keyword have been deprecated;
use VariantDir() and the variant_dir keyword instead.
File "/tmp/packerbuild-0/netpanzer/netpanzer/src/netpanzer-0.8.4/SConstruct", line 153, in <module>
scons: warning: BuildDir() and the build_dir keyword have been deprecated;
use VariantDir() and the variant_dir keyword instead.
File "/tmp/packerbuild-0/netpanzer/netpanzer/src/netpanzer-0.8.4/SConstruct", line 154, in <module>
scons: warning: BuildDir() and the build_dir keyword have been deprecated;
use VariantDir() and the variant_dir keyword instead.
File "/tmp/packerbuild-0/netpanzer/netpanzer/src/netpanzer-0.8.4/SConstruct", line 155, in <module>
NPVERSION = 0.8.4
SVERSION = Unversioned directory
Building version 0.8.4 in linux2
scons: done reading SConscript files.
scons: Building targets ...
g++ -o build/release/src/NetPanzer/Bot/Bot.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Bot/Bot.cpp
g++ -o build/release/src/NetPanzer/Bot/BotTaskList.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Bot/BotTaskList.cpp
g++ -o build/release/src/NetPanzer/Bot/BotPlayer.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Bot/BotPlayer.cpp
g++ -o build/release/src/NetPanzer/Classes/PlayerState.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/PlayerState.cpp
g++ -o build/release/src/NetPanzer/Classes/PlacementMatrix.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/PlacementMatrix.cpp
g++ -o build/release/src/NetPanzer/Classes/ViewCamera.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/ViewCamera.cpp
g++ -o build/release/src/NetPanzer/Classes/SelectionList.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/SelectionList.cpp
g++ -o build/release/src/NetPanzer/Classes/OpcodeDebugger.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/OpcodeDebugger.cpp
g++ -o build/release/src/NetPanzer/Classes/MapFile.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/MapFile.cpp
g++ -o build/release/src/NetPanzer/Classes/WorldInputCmdProcessor.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/WorldInputCmdProcessor.cpp
g++ -o build/release/src/NetPanzer/Classes/ScreenSurface.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/ScreenSurface.cpp
g++ -o build/release/src/NetPanzer/Classes/WorldMap.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/WorldMap.cpp
g++ -o build/release/src/NetPanzer/Classes/SelectionBoxSprite.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/SelectionBoxSprite.cpp
g++ -o build/release/src/NetPanzer/Classes/SpawnList.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/SpawnList.cpp
g++ -o build/release/src/NetPanzer/Classes/PlayerUnitConfig.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/PlayerUnitConfig.cpp
g++ -o build/release/src/NetPanzer/Classes/TipOfDay.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/TipOfDay.cpp
g++ -o build/release/src/NetPanzer/Classes/TileSet.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/TileSet.cpp
g++ -o build/release/src/NetPanzer/Classes/Sprite.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Sprite.cpp
g++ -o build/release/src/NetPanzer/Classes/SpriteSorter.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/SpriteSorter.cpp
g++ -o build/release/src/NetPanzer/Classes/AI/PathingState.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/AI/PathingState.cpp
g++ -o build/release/src/NetPanzer/Classes/AI/Astar.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/AI/Astar.cpp
g++ -o build/release/src/NetPanzer/Classes/AI/PathList.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/AI/PathList.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetMessageEncoder.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetMessageEncoder.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetworkClient.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetworkClient.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetPacketDebugger.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetPacketDebugger.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/ServerMessageRouter.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/ServerMessageRouter.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetworkInterface.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetworkInterface.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetPacketQueues.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetPacketQueues.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/ServerConnectDaemon.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/ServerConnectDaemon.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetworkState.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetworkState.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/ClientMessageRouter.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/ClientMessageRouter.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetMessageDecoder.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetMessageDecoder.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/NetworkServer.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/NetworkServer.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/ClientConnectDaemon.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/ClientConnectDaemon.cpp
g++ -o build/release/src/NetPanzer/Classes/Network/ConnectNetMessage.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Classes/Network/ConnectNetMessage.cpp
g++ -o build/release/src/NetPanzer/Core/NetworkGlobals.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Core/NetworkGlobals.cpp
g++ -o build/release/src/NetPanzer/Core/main.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Core/main.cpp
g++ -o build/release/src/NetPanzer/Interfaces/PathScheduler.o -c -O2 -s -Wall -DPACKAGE_VERSION=\"0.8.4\" -DNP_DATADIR=\"/usr/share/netpanzer\" -D_GNU_SOURCE=1 -D_REENTRANT -I. -Isrc/Lib -Isrc/NetPanzer -Isrc/Lib/physfs -Isrc/Lib/lua -I/usr/include/SDL -Isrc/Lib/physfs/zlib123 src/NetPanzer/Interfaces/PathScheduler.cpp
In file included from src/NetPanzer/Interfaces/PathScheduler.hpp:24:0,
from src/NetPanzer/Interfaces/PathScheduler.cpp:23:
src/Lib/ArrayUtil/QueueTemplate.hpp: In instantiation of ‘bool QueueTemplate<TYPE>::enqueue(const TYPE&) [with TYPE = PathRequest]’:
src/NetPanzer/Interfaces/PathScheduler.cpp:445:51: required from here
src/Lib/ArrayUtil/QueueTemplate.hpp:45:9: error: ‘add’ was not declared in this scope, and no declarations were found by argument-dependent lookup at the point of instantiation [-fpermissive]
src/Lib/ArrayUtil/QueueTemplate.hpp:45:9: note: declarations in dependent base ‘ArrayTemplate<PathRequest>’ are not found by unqualified lookup
src/Lib/ArrayUtil/QueueTemplate.hpp:45:9: note: use ‘this->add’ instead
scons: *** [build/release/src/NetPanzer/Interfaces/PathScheduler.o] Error 1
scons: building terminated because of errors.
==> ERROR: A failure occurred in build().
Aborting...
The build failed.
Last edited by ninjaprawn (2012-06-01 15:43:55) -
Error Installing ruby with RVM Single User mode
I've just installed RVM on ArchLinux x64 in single user mode via the recommended install script
curl -L https://get.rvm.io | bash -s stable
I've also installed all the requirements listed in
rvm requirements
However, I'm having trouble actually installing any version of ruby. And getting the following error:
arch:~ % rvm install 1.9.3
No binary rubies available for: ///ruby-1.9.3-p194.
Continuing with compilation. Please read 'rvm mount' to get more information on binary rubies.
Fetching yaml-0.1.4.tar.gz to /home/christopher/.rvm/archives
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 460k 100 460k 0 0 702k 0 --:--:-- --:--:-- --:--:-- 767k
Extracting yaml-0.1.4.tar.gz to /home/christopher/.rvm/src
Prepare yaml in /home/christopher/.rvm/src/yaml-0.1.4.
Configuring yaml in /home/christopher/.rvm/src/yaml-0.1.4.
Error running ' ./configure --prefix=/home/christopher/.rvm/usr ', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/configure.log
Compiling yaml in /home/christopher/.rvm/src/yaml-0.1.4.
Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/yaml/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Installing Ruby from source to: /home/christopher/.rvm/rubies/ruby-1.9.3-p194, this may take a while depending on your cpu(s)...
ruby-1.9.3-p194 - #downloading ruby-1.9.3-p194, this may take a while depending on your connection...
ruby-1.9.3-p194 - #extracting ruby-1.9.3-p194 to /home/christopher/.rvm/src/ruby-1.9.3-p194
ruby-1.9.3-p194 - #extracted to /home/christopher/.rvm/src/ruby-1.9.3-p194
Skipping configure step, 'configure' does not exist, did autoreconf not run successfully?
ruby-1.9.3-p194 - #compiling
Error running 'make', please read /home/christopher/.rvm/log/ruby-1.9.3-p194/make.log
There has been an error while running make. Halting the installation.
The log files are as follows:
arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/configure.log
__rvm_log_command:32: permission denied:
arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/yaml/make.log
make: *** No targets specified and no makefile found. Stop.
arch:~ % cat ~/.rvm/log/ruby-1.9.3-p194/make.log
make: *** No targets specified and no makefile found. Stop.I can't picture what is doing this other than something missing or muxed, but perhaps it's time for a relatively painless Archive & Install, which gives you a new/old OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space and no Disk corruption, and is relatively quick & painless...
http://docs.info.apple.com/article.html?artnum=107120
Just be sure to select Preserve Users & Settings. -
User from certificate with Cisco VPN client and ASA (and radius)
Hello,
we are trying to migrate a vpn client connection from GROUP to certificate. We want that client uses the user from the certificate and doesn't ask user, only password. Is it possible? Now, with user certificate, you can connect as another user if you know the user and the password of the other user with your own certifcate.
Thanks!
Santiago.mrbacklash wrote:
Ok with that being said will the MBA 11.6 1.4ghz have the guts to make it run mostly internet based programs over the VPN connection?
I think if you are running apps over the Internet the bottleneck will be the Internet and your VPN bandwidth. Your computer can certainly execute faster than Internet communications.
Besides, Internet or remote applications run on the remote server. All your local computer does is local processing of the data if necessary.
Message was edited by: BobTheFisherman -
Error installing iTunes with WindowsXP SP3 - iTunesSetup.exe
Hi, I just buy a ipod touch and I can not use because I can not install the itunes, the computer run Windows XP SP3, the error message is (iTunesSetup.exe is not a Win32 valid application.) Anybody does know what can I do?????? Thank`s
In the course of your troubleshooting to date, have you worked through the following document?
[iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"|http://support.apple.com/kb/TS1406] -
Error installing Flash with windows 2k sp4
I just re-installed Win 2000 Pro (desktop) and I'm trying to
install support programs. I installed
IE6 SP1, I was able to install Acrobat Reader, but I can not
install Flash or Shockwave
both fail in the same place. I have a screen shot showing the
error. The forum software doesn't
appear to support screen shot images tho :(.
Message box reads:
Could not load the DLL library
C:\WINNT\System32\Kernel32.dll
(GetSystemWow64DirectoryA) The specified
procedure could not be found.
I'm purplexed ... why would a system subroutine
be missing from the windows kernel?
Am I being given the wrong version of
flash/shockwave for Win2k?
What should I look to download?
ThanksWoW (64), everybody is having this problem. Is Adobe going to
fix it or not?
The best description I have is from a translated Chinese web
page:
http://translate.google.com/translate?hl=en&sl=zh-CN&u=http://www.hszxcx.cn/Window sAPI/FunctionView.aspx%3Fid%3D35582617387108&sa=X&oi=translate&resnum=7&ct =result&prev=/search%3Fq%3Dgetsystemwow64directorya%26start%3D40%26hl%3Den%26sa%3DN
The best forum is on the Afobe site which always seems to be
down for maintence:
http://store1.adobe.com/cfusion/webforums/forum/messageview.cfm%3Fforumid%3D44%26catid%3D1 85%26threadid%3D1328948%26enterthread%3Dy&ei=jcejR_qJD6XAasSQoZcC&sig2=Zy6XaPpIzPK W0-KLEeIHcQ&zx=LUnOwhkRcfk&ct=w -
Error installing EP6 with P9resource.jar missing
Hi there,
I am installation EP6 and CM part on Windows 2000/Oracle.
I get the following error during CM installation:
Error 2 (The system cannot find the file specified.
) in execution of a 'CreateProcess' function, line (261), with parameter
(c:\j2se/bin/java -classpath F:/EP6/PORTAL/data/JARS/SAPInst.jar;
F:/EP6/PORTAL/data/JARS/UtilitiesBase.jar;
F:/EP6/PORTAL/data/JARS/P9resource.jar;
F:/EP6/PORTAL/data/JARS/P9util.jar;
F:/EP6/PORTAL/data/JARS/P9oracle.jar;
F:/EP6/PORTAL/data/JARS/P9base.jar
sapinst.Check_DB_Connection com.sap.portals.jdbc.oracle.OracleDriver toyota SAPWCM go2sleep 1527 DCM).
I have checked the F:/EP6/PORTAL/data/JARS directory and the file P9resource is not there. Where can I locate this file.
This is resolved now. There was an issue with java.exe in bin directory.
Message was edited by: Abhijeet NaiduCould you please tell me what exactly you did and where was the issue?
I also have the same error in line 569. -
Problem installing certificate .pem to WLC4404
Hi, im having several problems trying to upload my auth certificate to WLC. I tried upload to WLC but im having a error "ERROR INSTALLING CERTIFICATE"
I have seen this link. Which it seems interesting to me but i cant access.. can someone tell me how to access here?????
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsy88149
thanksThis is the error
TFTP Webauth cert transfer starting.
TFTP receive complete... Installing Certificate.
*TransferTask: Jan 22 16:50:28.849: sshpmAddWebauthCert: Extracting private key from webauth cert and using bundled pkcs12 password.
*TransferTask: Jan 22 16:50:30.800: sshpmDecodePrivateKey: calling ssh_skb_decode()...
*TransferTask: Jan 22 16:50:32.716: sshpmDecodePrivateKey: SshPrivateKeyPtr after skb_decode: 0x31afbb70
*TransferTask: Jan 22 16:50:32.717: sshpmAddWebauthCert: got private key; extracting certificate...
*TransferTask: Jan 22 16:50:32.723: sshpmAddWebauthCert: extracted binary cert; doing x509 decode
*TransferTask: Jan 22 16:50:32.724: sshpmAddWebauthCert: doing x509 decode for 1319 byte certificate...
Error installing certificate. -
Installing certificate problem
Hi,
I'm trying to install our company SSL certificate on my new N95. Copied the Certnew.cer file onto my phone, as I have done with every other series 60 phone, and browsed to it in File Manager. Normally I would just open it, it would install before asking me if I want to use it for certificate checking, etc. However, on the N95 is opens the certificate in Notes so it doesn't get installed.
Any ideas on how I can resolve this?This is the error
TFTP Webauth cert transfer starting.
TFTP receive complete... Installing Certificate.
*TransferTask: Jan 22 16:50:28.849: sshpmAddWebauthCert: Extracting private key from webauth cert and using bundled pkcs12 password.
*TransferTask: Jan 22 16:50:30.800: sshpmDecodePrivateKey: calling ssh_skb_decode()...
*TransferTask: Jan 22 16:50:32.716: sshpmDecodePrivateKey: SshPrivateKeyPtr after skb_decode: 0x31afbb70
*TransferTask: Jan 22 16:50:32.717: sshpmAddWebauthCert: got private key; extracting certificate...
*TransferTask: Jan 22 16:50:32.723: sshpmAddWebauthCert: extracted binary cert; doing x509 decode
*TransferTask: Jan 22 16:50:32.724: sshpmAddWebauthCert: doing x509 decode for 1319 byte certificate...
Error installing certificate. -
Error installing Apps on my Z10 from BB World
I've just recently started to get an error message on my Z10 when downloading apps that say “Error Installing Application” with a red bar. I thought it may have been the app I was originally trying to download, but I tried others and I continued to get that same message. Generally I have not had a problem in updating apps. I have tried rebooting many time but to no avail. I'm running OS 10.2.1.2102.
OK...then next...with a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (step 1 should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive
2) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you may need to contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Cisco VPN client install fails with Error 1722 on Windows 7
Hi,
I am having issues with laptops upgraded from Vista to Windows 7.
Prior to the upgrade they are running Cisco VPN Client 5.0.05.0290. These laptops also have Juniper Network Connect 6.5 and Citrix web client installed. The windows upgrade advisor made no recommendations regarding uninstalling / reinstalling these apps.
I have done an inplace upgade to Windows 7 (Windows Vista Enterprise 32bit to Windows 7 Enterprise 32 bit) and after the install the Cisco client is not working. Uninstalled the client (the uninstall was successful) then reinstalled and the installation fails at Installing Cisco Systems Virtual Adapter - error 1722 there was a problem with the windows installer package.
I have followed the steps for a manual uninstall of the Cisco client and then tried the install again - still not successful. Interestingly (or not) the Juniper Network Connect also fails with the error The Network Connect Virtual adapter driver is not installed properly. This also fails to reinstall after being removed.
I tried removing the VPN clients on another laptop and then running the upgrade but the same errors occured when reinstalling the VPN Client. I have tried the Winfix and DNE patch from Citrix but these fail saying there is a corruption in the application.
On another laptop where only the Cisco VPN client was installed a reinstall was required after the upgrade, but it did install successfully.
On a clean image these applications all install fine, however I have a large number of laptops do upgrade and don't want to do a fresh install and settings migration on all of them.
What files / registry entrys are involved with the DNE adapter so I can manually clear it all out before reinstalling?
Anything else I can do to troubleshoot this issue?
Cheers,
JamesYou should be able to install the 64 bit version of the Cisco VPN software
Latest version is vpnclient-winx64-msi-5.0.07.0440-k9.exe
You should download and run MCPR.exe first, to clean out any traces of McAfee products that conflict with Cisco VPN.
http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
If there is a problem with vbscript registration on the system - there is a fixit tool from Microsoft for that:
MicrosoftFixit50842.msi
(Using Shrew VPN is a possible workaround.) -
Config air-lap1041n-e-k9 with cisco 5500 (5508) series wireless controller. how to?
Hi!
I try to configure a Cisco 5508 Wireless controller and 25 Air-lap1041 to use as VoIP and data. I read documents, manuals, etc, but the AP doesn't charge the configuration, or not conect with the Wireless Controller, why? No Radius server present, only WPA security.howto, please...
I try to put a static ip in the LAP, with lwapp or capwap command, (LWAPP/CAPWAP ap ip address direccion mascara) and the AP returns "You should configure Domain and Name Server from controller CLI/GUI." and i can't change the name of the AP (Command is disabled).
Log from AP:
using ÿÿÿÿ ddr static values from serial eeprom
ddr init done
Running Normal Memtest...
Passed.
IOS Bootloader - Starting system.
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
Xmodem file system is available.
DDR values used from system serial eeprom.
WRDTR,CLKTR: 0x83000800, 0xc0000000
RQDC, RFDC : 0x80000037, 0x00000184
PCIE0: link is up.
PCIE0: VC0 is active
PCIE1: link is NOT up.
PCIE1 port 1 not initialize
PCIEx: initialization done
flashfs[0]: 6 files, 2 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32385024
flashfs[0]: Bytes used: 2369024
flashfs[0]: Bytes available: 30016000
flashfs[0]: flashfs fsck took 21 seconds.
Reading cookie from system serial eeprom...Done
Base Ethernet MAC address: 44:2b:03:dc:09:25
Ethernet speed is 1000 Mb - FULL duplex
Loading "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx"...###########################
File "flash:/c1140-rcvk9w8-mx/c1140-rcvk9w8-mx" uncompressed and installed, entr
y point: 0x4000
executing...
enet halted
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
SE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 01-Jun-10 12:53 by prod_rel_team
Proceeding with system init
Proceeding to unmask interrupts
Initializing flashfs...
FLASH CHIP: Numonyx P33
Checking for Over Erased blocks
flashfs[1]: 6 files, 2 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 32126976
flashfs[1]: Bytes used: 2369024
flashfs[1]: Bytes available: 29757952
flashfs[1]: flashfs fsck took 7 seconds.
flashfs[1]: Initialization complete.
flashfs[2]: 0 files, 1 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 11999232
flashfs[2]: Bytes used: 1024
flashfs[2]: Bytes available: 11998208
flashfs[2]: flashfs fsck took 1 seconds.
flashfs[2]: Initialization complete....done Initializing flashfs.
Ethernet speed is 1000 Mb - FULL duplex
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-LAP1041N-E-K9 (PowerPC405ex) processor (revision B0) with 98294K/32
768K bytes of memory.
Processor board ID FCZ1611W414
PowerPC405ex CPU at 333Mhz, revision number 0x147E
Last reset from reload
LWAPP image version 7.0.94.21
1 Gigabit Ethernet interface
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 44:2B:03:DC:09:25
Part Number : 73-14034-04
PCA Assembly Number : 800-34273-05
PCA Revision Number : A0
PCB Serial Number : FOC16075VZ3
Top Assembly Part Number : 800-34284-03
Top Assembly Serial Number : FCZ1611W414
Top Revision Number : A0
Product/Model Number : AIR-LAP1041N-E-K9
% Please define a domain-name first.
Press RETURN to get started!
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:00:09.574: *** CRASH_LOG = YES
Base Ethernet MAC address: 44:2B:03:DC:09:25
*Mar 1 00:00:09.838: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log
(contains, 1024 messages)
*Mar 1 00:00:11.848: %LINK-3-UPDOWN: Interface GigabitEthernet0, changed state
to up
*Mar 1 00:00:11.892: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-RCVK9W8-M), Version 12.4(23c)JA, RELEA
SE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Tue 01-Jun-10 12:53 by prod_rel_team
*Mar 1 00:08:16.954: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEth
ernet0, changed state to up
logging facility kern
^
% Invalid input detected at '^' marker.
*Mar 1 00:08:28.047: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Mar 1 00:08:28.049: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Mar 1 00:09:08.282: %CDP_PD-2-POWER_LOW: All radios disabled - LOW_POWER_CLASS
IC_NO_INJECTOR_CONFIGURED AIR-CT5508-K9 (c464.138f.9345)
*Mar 1 00:09:08.282: -Verify the required power-injector is installed on this
port: AIR-CT5508-K9(Gig 0/0/2).
*Mar 1 00:09:08.282: -If a power-injector is installed, issue the command:"pow
er inline negotiation injector installed"
*Mar 1 00:12:19.976: %CAPWAP-5-STATIC_TO_DHCP_IP: Could not discover WLC using
static IP. Forcing AP to use DHCP.
*Mar 1 00:12:29.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:39.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:49.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:12:59.994: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:13:09.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
Not in Bound state.
*Mar 1 00:13:19.993: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does
not have an Ip !!
*Mar 1 00:13:19.993: %CAPWAP-5-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
logs from wireless controller:
(Cisco Controller) >show interface summary
Interface Name Port Vlan Id IP Address Type Ap Mgr Gu
est
ap-manager 2 untagged 209.165.200.231 Dynamic Yes No
management 1 untagged 209.165.200.230 Static Yes No
service-port N/A N/A 192.168.1.157 Static No No
virtual N/A N/A 1.1.1.1 Static No No
(Cisco Controller) >
i conect with service-port ok and the management port works, i think.
AP442b.03dc.0925>ping 209.165.200.230
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 209.165.200.230, timeout is 2 seconds:
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
AP442b.03dc.0925>
Help, please!
i write in spanish:
Hola:
Tengo que configurar un cisco 5508 wireless controller con 25 air-lap1041n, para usarlo como acceso de datos y voz. ¿Cómo lo hago? He leído manuales, y seguido las instrucciones, pero el punto de acceso parace que no es capaz de cargar el perfil. No hay servidor radius, solo la configuración de una clave wpa. Alguién me puede indicar pasos, GraciasHi!
I buy a gigabit switch. I connect the service-port to gigabit switch, and laptop to gigabit switch. I used 192.168.1.x ip address (192.168.1.157 to service-port and 192.168.1.233 to wired port on laptop, well, the laptop has two ip adress, 192.168.1.233 and 209.165.200.2, and the laptop works ok. Ping to 209.165.200.230 -ip address of management interface- and ping to 209.165.200.203 -ip address for AP, is assigned by DHCP of WLC. And i connect the ap to gigabit switch, and the wlc assigns well an ip direction.
I post the run-config and sysinfo log. The gigabit switch is tp-link model tl-sg1005d, no configuration.
Before the logs, I see this message from AP:
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
Hola:
He comprado un switch gigabit. Conecto el service-port al switch gigabit y el portátil también (por cable). Uso como direcciones ip el rango 192.168.1.x (192.168.1.157 asignado al service-port y 192, 168.1.233 al portátil, bueno, el portátil tiene dos direcciones, la dicha anteriormente y la 209.165.200.2) El portátil funciona bien, hace ping al 209.165.200.230 - la ip de la management interface, y a 209.165.200.203 - ip asignada al AP por el DHCP del WLC. He conectado el AP al swtich gigabit, y el dhcp del wlc asigna correctamente una dirección ip.
Añado a continuación los resultados de los comandos "show run-config" y "show sysinfo". El switch es un TP-LINK modelo TL-S1005D, sin necesidad de configuración.
Antes de mostrar los resultados de los comandos, he visto el siguiente mensaje en el log del AP:
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
Un saludo
Antonio R.
(Cisco Controller) >show run-config
Press Enter to continue...
System Inventory
NAME: "Chassis" , DESCR: "Cisco Wireless Controller"
PID: AIR-CT5508-K9, VID: V02, SN: FCW1608L05X
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
Press Enter to continue or to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.4
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console
1.27
Build Type....................................... DATA + WPS
System Name...................................... CISCO-CAPWAP-CONTROLLER
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 209.165.200.230
Last Reset....................................... Power on reset
System Up Time................................... 0 days 0 hrs 17 mins 45 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
Rome, Vienna
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... ES - Spain
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +36 C
External Temperature............................. +23 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
Press Enter to continue or to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Network Information
RF-Network Name............................. hosp
Web Mode.................................... Disable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Enable
Secure Shell (ssh).......................... Enable
Telnet...................................... Disable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Unicast
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Disable
Mgmt Via Dynamic Interface.................. Disable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Fast SSID Change ........................... Disabled
IP/MAC Addr Binding Check .................. Enabled
Press Enter to continue or to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE SFPType
1 Normal Forw Enable Auto 1000 Full Up Enable N/A 1000BaseTX
2 Normal Disa Enable Auto Auto Down Enable N/A Not Present
3 Normal Disa Enable Auto Auto Down Enable N/A Not Present
4 Normal Disa Enable Auto Auto Down Enable N/A Not Present
5 Normal Disa Enable Auto Auto Down Enable N/A Not Present
6 Normal Disa Enable Auto Auto Down Enable N/A Not Present
7 Normal Disa Enable Auto Auto Down Enable N/A Not Present
8 Normal Disa Enable Auto Auto Down Enable N/A Not Present
Press Enter to continue or to abort
AP Summary
Number of APs.................................... 0
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location
Port Country Priority
Press Enter to continue or to abort
Press Enter to continue or to abort
AP Location
Site Name........................................ default-group
Site Description.................................
WLAN ID Interface Network Admission Control
1 management Disabled
AP Name Slots AP Model Ethernet MAC Location
Port Country Priority GroupName
Press Enter to continue or to abort
AP Config
Press Enter to continue or to abort
Press Enter to continue or to abort
AP Airewave Director Configuration
Press Enter to continue or to abort
802.11a Configuration
802.11a Network.................................. Disabled
11nSupport....................................... Enabled
802.11a Low Band........................... Enabled
802.11a Mid Band........................... Enabled
802.11a High Band.......................... Enabled
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
MCS 5........................................ Supported
MCS 6........................................ Supported
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Fragmentation Threshold.......................... 2346
TI Threshold..................................... -50
Legacy Tx Beamforming setting.................... Disabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admision Control (CAC) configuration
Voice AC:
Voice AC - Admission control (ACM)............ Disabled
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Video AC:
Video AC - Admission control (ACM)............ Disabled
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
Video max RF bandwidth........................ Infinite
Video reserved roaming bandwidth.............. 0
Press Enter to continue or to abort
802.11a Advanced Configuration
Press Enter to continue or to abort
802.11a Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
TxPower Update Logging......................... Off
Default 802.11a AP performance profiles
802.11a Global Interference threshold.......... 10 %
802.11a Global noise threshold................. -70 dBm
802.11a Global RF utilization threshold........ 80 %
802.11a Global throughput threshold............ 1000000 bps
802.11a Global clients threshold............... 12 clients
Default 802.11a AP monitoring
802.11a Monitor Mode........................... enable
802.11a Monitor Mode for Mesh AP Backhaul...... disable
802.11a Monitor Channels....................... Country channels
802.11a AP Coverage Interval................... 180 seconds
802.11a AP Load Interval....................... 60 seconds
802.11a AP Noise Interval...................... 180 seconds
--More or (q)uit current module or to abort
--More or (q)uit current module or to abort
802.11a AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -10 dBm
Max Transmit Power............................. 30 dBm
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... c4:64:13:8f:93:40
Last Run....................................... 75 seconds ago
Coverage Hole Detection
802.11a Coverage Hole Detection Mode........... Enabled
802.11a Coverage Voice Packet Count............ 100 packets
802.11a Coverage Voice Packet Percentage....... 50%
802.11a Coverage Voice RSSI Threshold.......... -80 dBm
802.11a Coverage Data Packet Count............. 50 packets
802.11a Coverage Data Packet Percentage........ 50%
802.11a Coverage Data RSSI Threshold........... -80 dBm
802.11a Global coverage exception level........ 25 %
802.11a Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
--More or (q)uit current module or to abort
Channel Update Interval........................ 600 seconds [startup]
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... c4:64:13:8f:93:40
Last Run....................................... 75 seconds ago
DCA Sensitivity Level.......................... STARTUP (5 dB)
DCA 802.11n Channel Width...................... 20 MHz
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11a 5 GHz Auto-RF Channel List
Allowed Channel List......................... 36,40,44,48,52,56,60,64
Unused Channel List.......................... 100,104,108,112,116,120,124,
128,132,136,140
DCA Outdoor AP option.......................... Disabled
Radio RF Grouping
802.11a Group Mode............................. AUTO
--More or (q)uit current module or to abort
802.11a Group Update Interval.................. 600 seconds
802.11a Group Leader........................... c4:64:13:8f:93:40
802.11a Group Member......................... c4:64:13:8f:93:40
802.11a Last Run............................... 75 seconds ago
802.11b Configuration
802.11b Network.................................. Enabled
11gSupport....................................... Enabled
11nSupport....................................... Enabled
802.11b/g Operational Rates
802.11b/g 1M Rate............................ Mandatory
802.11b/g 2M Rate............................ Mandatory
802.11b/g 5.5M Rate.......................... Mandatory
802.11b/g 11M Rate........................... Mandatory
802.11g 6M Rate.............................. Supported
802.11g 9M Rate.............................. Supported
802.11g 12M Rate............................. Supported
802.11g 18M Rate............................. Supported
802.11g 24M Rate............................. Supported
802.11g 36M Rate............................. Supported
802.11g 48M Rate............................. Supported
802.11g 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
--More or (q)uit current module or to abort
MCS 5........................................ Supported
MCS 6........................................ Supported
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Disabled
Priority 2............................... Disabled
Priority 3............................... Disabled
Priority 4............................... Disabled
Priority 5............................... Disabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Beacon Interval.................................. 100
CF Pollable mode................................. Disabled
--More or (q)uit current module or to abort
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 1
Default Tx Power Level........................... 0
DTPC Status..................................... Enabled
Call Admission Limit ........................... 105
G711 CU Quantum ................................. 15
ED Threshold..................................... -50
Fragmentation Threshold.......................... 2346
PBCC mandatory................................... Disabled
RTS Threshold.................................... 2347
Short Preamble mandatory......................... Enabled
Short Retry Limit................................ 7
Legacy Tx Beamforming setting.................... Enabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
Faster Carrier Tracking Loop..................... Disabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admision Control (CAC) configuration
Voice AC - Admission control (ACM)............ Disabled
--More or (q)uit current module or to abort
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice load-based CAC mode..................... Disabled
Voice tspec inactivity timeout................ Disabled
Video AC - Admission control (ACM)............ Disabled
Video max RF bandwidth........................ 50
Video reserved roaming bandwidth.............. 0
802.11b Advanced Configuration
Press Enter to continue or to abort
802.11b Airewave Director Configuration
RF Event and Performance Logging
Channel Update Logging......................... Off
Coverage Profile Logging....................... Off
Foreign Profile Logging........................ Off
Load Profile Logging........................... Off
Noise Profile Logging.......................... Off
Performance Profile Logging.................... Off
Transmit Power Update Logging.................. Off
Default 802.11b AP performance profiles
802.11b Global Interference threshold.......... 10 %
802.11b Global noise threshold................. -70 dBm
802.11b Global RF utilization threshold........ 80 %
802.11b Global throughput threshold............ 1000000 bps
802.11b Global clients threshold............... 12 clients
Default 802.11b AP monitoring
802.11b Monitor Mode........................... enable
802.11b Monitor Channels....................... Country channels
802.11b AP Coverage Interval................... 180 seconds
802.11b AP Load Interval....................... 60 seconds
802.11b AP Noise Interval...................... 180 seconds
802.11b AP Signal Strength Interval............ 60 seconds
Automatic Transmit Power Assignment
Transmit Power Assignment Mode................. AUTO
Transmit Power Update Interval................. 600 seconds
Transmit Power Threshold....................... -70 dBm
Transmit Power Neighbor Count.................. 3 APs
Min Transmit Power............................. -10 dBm
Max Transmit Power............................. 30 dBm
Transmit Power Update Contribution............. SNI.
Transmit Power Assignment Leader............... c4:64:13:8f:93:40
Last Run....................................... 213 seconds ago
Coverage Hole Detection
802.11b Coverage Hole Detection Mode........... Enabled
802.11b Coverage Voice Packet Count............ 100 packets
802.11b Coverage Voice Packet Percentage....... 50%
802.11b Coverage Voice RSSI Threshold.......... -80 dBm
802.11b Coverage Data Packet Count............. 50 packets
802.11b Coverage Data Packet Percentage........ 50%
802.11b Coverage Data RSSI Threshold........... -80 dBm
802.11b Global coverage exception level........ 25 %
802.11b Global client minimum exception lev.... 3 clients
Automatic Channel Assignment
Channel Assignment Mode........................ AUTO
Channel Update Interval........................ 600 seconds [startup]
Anchor time (Hour of the day).................. 0
Channel Update Contribution.................... SNI.
Channel Assignment Leader...................... c4:64:13:8f:93:40
Last Run....................................... 213 seconds ago
DCA Sensitivity Level: ...................... STARTUP (5 dB)
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11b Auto-RF Allowed Channel List........... 1,6,11
Auto-RF Unused Channel List.................... 2,3,4,5,7,8,9,10,12,13
Radio RF Grouping
802.11b Group Mode............................. AUTO
802.11b Group Update Interval.................. 600 seconds
802.11b Group Leader........................... c4:64:13:8f:93:40
802.11b Group Member......................... c4:64:13:8f:93:40
802.11b Last Run............................... 213 seconds ago
Mobility Configuration
Symmetric Mobility Tunneling (current) .......... Enabled
Symmetric Mobility Tunneling (after reboot) ..... Enabled
Mobility Protocol Port........................... 16666
Default Mobility Domain.......................... hosp
Multicast Mode .................................. Disabled
Mobility Domain ID for 802.11r................... 0x97e2
Mobility Keepalive Interval...................... 10
Mobility Keepalive Count......................... 3
Mobility Group Members Configured................ 1
Mobility Control Message DSCP Value.............. 0
Controllers configured in the Mobility Group
MAC Address IP Address Group Name Multicast
IP Status
c4:64:13:8f:93:40 209.165.200.230 hosp 0.0.0.0
Up
Advanced Configuration
Probe request filtering.......................... Enabled
Probes fwd to controller per client per radio.... 0
Probe request rate-limiting interval............. 500 msec
EAP-Identity-Request Timeout (seconds)........... 30
EAP-Identity-Request Max Retries................. 2
EAP Key-Index for Dynamic WEP.................... 0
EAP Max-Login Ignore Identity Response........... enable
EAP-Request Timeout (seconds).................... 30
EAP-Request Max Retries.......................... 2
EAPOL-Key Timeout (milliseconds)................. 1000
EAPOL-Key Max Retries............................ 2
dot11-padding.................................... Disabled
Authentication Response Timeout (seconds)........ 10
Rogue Entry Timeout (seconds).................... 1200
AP Heart Beat Timeout (seconds).................. 30
AP Discovery Timeout (seconds)................... 10
AP Local mode Fast Heartbeat (seconds)........... disable
AP Hreap mode Fast Heartbeat (seconds)........... disable
AP Primary Discovery Timeout (seconds)........... 120
AP Primed Join Timeout (seconds)................. 0
Packet Forwarding watchdog timer (seconds)....... 240 (enable)
Location Configuration
RFID Tag data Collection......................... Enabled
RFID timeout.................................... 1200 seconds
RFID mobility.................................... Oui:00:14:7e : Vendor:pango S
tate:Disabled
Interface Configuration
Interface Name................................... management
MAC Address...................................... c4:64:13:8f:93:40
IP Address....................................... 209.165.200.230
IP Netmask....................................... 255.255.255.0
IP Gateway....................................... 209.165.200.1
External NAT IP State............................ Disabled
External NAT IP Address.......................... 192.168.1.1
VLAN............................................. untagged
Quarantine-vlan.................................. 0
Active Physical Port............................. 1
Primary Physical Port............................ 1
Backup Physical Port............................. Unconfigured
Primary DHCP Server.............................. 209.165.200.230
Secondary DHCP Server............................ Unconfigured
DHCP Option 82................................... Disabled
ACL.............................................. Unconfigured
AP Manager....................................... Yes
Guest Interface.................................. No
Interface Name................................... service-port
MAC Address...................................... c4:64:13:8f:93:41
IP Address....................................... 192.168.1.157
IP Netmask....................................... 255.255.255.0
DHCP Option 82................................... Disabled
DHCP Protocol.................................... Disabled
AP Manager....................................... No
Guest Interface.................................. No
Interface Name................................... virtual
MAC Address...................................... c4:64:13:8f:93:40
IP Address....................................... 1.1.1.1
DHCP Option 82................................... Disabled
Virtual DNS Host Name............................ Disabled
AP Manager....................................... No
Guest Interface.................................. No
WLAN Configuration
WLAN Identifier.................................. 1
Profile Name..................................... HOSP3C
Network Name (SSID).............................. HOSP3C
Status........................................... Enabled
MAC Filtering.................................... Disabled
Broadcast SSID................................... Enabled
AAA Policy Override.............................. Disabled
Network Admission Control
NAC-State...................................... Disabled
Quarantine VLAN................................ 0
Number of Active Clients......................... 0
Exclusionlist Timeout............................ 60 seconds
Session Timeout.................................. 1800 seconds
CHD per WLAN..................................... Enabled
Webauth DHCP exclusion........................... Disabled
Interface........................................ management
WLAN ACL......................................... unconfigured
DHCP Server...................................... 209.165.200.230
DHCP Address Assignment Required................. Enabled
Quality of Service............................... Platinum (voice)
Scan Defer Priority.............................. 5,6
Scan Defer Time.................................. 100 milliseconds
WMM.............................................. Disabled
Media Stream Multicast-direct.................... Disabled
CCX - AironetIe Support.......................... Enabled
CCX - Gratuitous ProbeResponse (GPR)............. Disabled
CCX - Diagnostics Channel Capability............. Disabled
Dot11-Phone Mode (7920).......................... Disabled
Wired Protocol................................... None
IPv6 Support..................................... Disabled
Peer-to-Peer Blocking Action..................... Disabled
Radio Policy..................................... 802.11b and 802.11g only
DTIM period for 802.11a radio.................... 1
DTIM period for 802.11b radio.................... 1
Radius Servers
Authentication................................ Disabled
Accounting.................................... Disabled
Dynamic Interface............................. Disabled
Local EAP Authentication......................... Disabled
Security
802.11 Authentication:........................ Open System
Static WEP Keys............................... Disabled
802.1X........................................ Disabled
Wi-Fi Protected Access (WPA/WPA2)............. Enabled
WPA (SSN IE)............................... Disabled
WPA2 (RSN IE).............................. Enabled
TKIP Cipher............................. Enabled
AES Cipher.............................. Enabled
Auth Key Management
802.1x.................................. Disabled
PSK..................................... Enabled
CCKM.................................... Disabled
FT(802.11r)............................. Disabled
FT-PSK(802.11r)......................... Disabled
FT Reassociation Timeout......................... 20
FT Over-The-Air mode............................. Enabled
FT Over-The-Ds mode.............................. Enabled
CKIP ......................................... Disabled
Web Based Authentication...................... Disabled
Web-Passthrough............................... Disabled
Conditional Web Redirect...................... Disabled
Splash-Page Web Redirect...................... Disabled
Auto Anchor................................... Disabled
H-REAP Local Switching........................ Disabled
H-REAP Learn IP Address....................... Enabled
Infrastructure MFP protection................. Enabled
Client MFP.................................... Optional
Tkip MIC Countermeasure Hold-down Timer....... 60
Call Snooping.................................... Disabled
Band Select...................................... Enabled
Load Balancing................................... Enabled
Mobility Anchor List
WLAN ID IP Address Status
Press Enter to continue or to abort
Press Enter to continue or to abort
ACL Configuration
Press Enter to continue or to abort
CPU ACL Configuration
CPU Acl Name................................ NOT CONFIGURED
Wireless Traffic............................ Disabled
Wired Traffic............................... Disabled
RADIUS Configuration
Vendor Id Backward Compatibility................. Disabled
Call Station Id Case............................. lower
Call Station Id Type............................. IP Address
Aggressive Failover.............................. Enabled
Keywrap.......................................... Disabled
Fallback Test:
Test Mode.................................... Off
Probe User Name.............................. cisco-probe
Interval (in seconds)........................ 300
MAC Delimiter for Authentication Messages........ hyphen
MAC Delimiter for Accounting Messages............ hyphen
Authentication Servers
Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/P
hase1/Group/Lifetime/Auth/Encr
Accounting Servers
Idx Type Server Address Port State Tout RFC3576 IPSec - AuthMode/P
hase1/Group/Lifetime/Auth/Encr
--More or (q)uit current module or to abort
TACACS Configuration
Authentication Servers
Idx Server Address Port State Tout
Authorization Servers
Idx Server Address Port State Tout
Accounting Servers
Idx Server Address Port State Tout
LDAP Configuration
Press Enter to continue or to abort
Local EAP Configuration
User credentials database search order:
Primary ..................................... Local DB
Timer:
Active timeout .............................. 300
Configured EAP profiles:
EAP Method configuration:
EAP-FAST:
Server key ................................
TTL for the PAC ........................... 10
Anonymous provision allowed ............... Yes
Authority ID .............................. 436973636f00000000000000000000
00
Authority Information ..................... Cisco A-ID
Press Enter to continue or to abort
HREAP Group Summary
HREAP Group Summary: Count: 0
Group Name # Aps
Press Enter to continue or to abort
HREAP Group Detail
Press Enter to continue or to abort
Route Info
Number of Routes................................. 0
Destination Network Netmask Gateway
Press Enter to continue or to abort
Qos Queue Length Info
Platinum queue length............................ 100
Gold queue length................................ 75
Silver queue length.............................. 50
Bronze queue length.............................. 25
Press Enter to continue or to abort
Mac Filter Info
Press Enter to continue or to abort
Authorization List
Authorize MIC APs against AAA ................... disabled
Authorize LSC APs against Auth-List ............. disabled
Allow APs with MIC - Manufactured Installed C.... disabled
Allow APs with SSC - Self-Signed Certificate..... disabled
Allow APs with LSC - Locally Significant Cert.... disabled
Load Balancing Info
Aggressive Load Balancing........................ Disabled
Aggressive Load Balancing Window................. 5 clients
Aggressive Load Balancing Denial Count........... 3
Statistics
Total Denied Count............................... 0 clients
Total Denial Sent................................ 0 messages
Exceeded Denial Max Limit Count.................. 0 times
None 5G Candidate Count.......................... 0 times
None 2.4G Candidate Count........................ 0 times
Press Enter to continue or to abort
Dhcp Scope Info
Scope: PUNTOSAP
Enabled.......................................... Yes
Lease Time....................................... 86400 (1 day )
Pool Start....................................... 209.165.200.201
Pool End......................................... 209.165.200.229
Network.......................................... 209.165.200.0
Netmask.......................................... 255.255.255.0
Default Routers.................................. 0.0.0.0 0.0.0.0 0.0.0.0
DNS Domain.......................................
DNS.............................................. 0.0.0.0 0.0.0.0 0.0.0.0
Netbios Name Servers............................. 0.0.0.0 0.0.0.0 0.0.0.0
Press Enter to continue or to abort
Exclusion List ConfigurationUnable to retrieve exclusion-list entry
Press Enter to continue or to abort
CDP Configuration
Press Enter to continue or to abort
Country Channels Configuration
Configured Country............................. ES - Spain
KEY: * = Channel is legal in this country and may be configured manually.
A = Channel is the Auto-RF default in this country.
. = Channel is not legal in this country.
C = Channel has been configured for use by Auto-RF.
x = Channel is available to be configured for use by Auto-RF.
(-,-) = (indoor, outdoor) regulatory doamin allowed by this country.
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11bg :
Channels : 1 1 1 1 1
: 1 2 3 4 5 6 7 8 9 0 1 2 3 4
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-
ES (-E ,-E ): A * * * * A * * * * A * * .
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
802.11a : 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Channels : 3 3 3 4 4 4 4 4 5 5 6 6 0 0 0 1 1 2 2 2 3 3 4 4 5 5 6 6
: 4 6 8 0 2 4 6 8 2 6 0 4 0 4 8 2 6 0 4 8 2 6 0 9 3 7 1 5
-----------------:+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-
ES (-E ,-E ): . A . A . A . A A A A A * * * * * * * * * * * . . . . .
Press Enter to continue or to abort
WPS Configuration Summary
Auto-Immune
Auto-Immune.................................... Disabled
Client Exclusion Policy
Excessive 802.11-association failures.......... Enabled
Excessive 802.11-authentication failures....... Enabled
Excessive 802.1x-authentication................ Enabled
IP-theft....................................... Enabled
Excessive Web authentication failure........... Enabled
Signature Policy
Signature Processing........................... Enabled
Press Enter to continue or to abort
Custom Web Configuration
Radius Authentication Method..................... PAP
Cisco Logo....................................... Enabled
CustomLogo....................................... None
Custom Title..................................... None
Custom Message................................... None
Custom Redirect URL.............................. None
Web Authentication Type.......................... Internal Default
External Web Authentication URL.................. None
Configuration Per Profile:
Rogue AP Configuration
Rogue Location Discovery Protocol................ Disabled
Rogue on wire Auto-Contain....................... Disabled
Rogue using our SSID Auto-Contain................ Disabled
Valid client on rogue AP Auto-Contain............ Disabled
Rogue AP timeout................................. 1200
MAC Address Classification # APs # Clients Last Heard
Adhoc Rogue Configuration
Detect and report Ad-Hoc Networks................ Enabled
Auto-Contain Ad-Hoc Networks..................... Disabled
Client MAC Address Adhoc BSSID State # APs Last Heard
Rogue Client Configuration
Validate rogue clients against AAA............... Disabled
Rogue Client Configuration
Validate rogue clients against AAA............... Disabled
--More-- or (q)uit
MAC Address State # APs Last Heard
Ignore List Configuration
MAC Address
Rogue Rule Configuration
Priority Rule Name State Type Match Hit Count
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 6.0.199.4
Bootloader Version............................... 1.0.1
Field Recovery Image Version..................... 6.0.182.0
Firmware Version................................. FPGA 1.3, Env 1.6, USB console
1.27
Build Type....................................... DATA + WPS
System Name...................................... CISCO-CAPWAP-CONTROLLER
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... 209.165.200.230
Last Reset....................................... Power on reset
System Up Time................................... 0 days 0 hrs 41 mins 2 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin,
Rome, Vienna
Current Boot License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... ES - Spain
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +39 C
External Temperature............................. +23 C
Fan Status....................................... OK
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Disabled
Number of WLANs.................................. 1
3rd Party Access Point Support................... Disabled
Number of Active Clients......................... 0
Burned-in MAC Address............................ C4:64:13:8F:93:40
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 25
(Cisco Controller) >
The AP log
AP442b.03dc.0925>
*Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Selected MWAR 'CISCO-CAPWAP-CONTROLLER
'(index 0).
*Apr 19 23:10:18.428: %CAPWAP-3-ERRORLOG: Go join a capwap controller
logging facility kern
^
% Invalid input detected at '^' marker.
logging facility kern
^
% Invalid input detected at '^' marker.
*Apr 19 23:10:19.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_i
p: 209.165.200.230 peer_port: 5246
*Apr 19 23:10:19.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Apr 19 23:10:20.200: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully
peer_ip: 209.165.200.230 peer_port: 5246
*Apr 19 23:10:20.201: %CAPWAP-5-SENDJOIN: sending Join Request to 209.165.200.23
0
*Apr 19 23:10:20.201: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Apr 19 23:10:20.211: %CAPWAP-3-ERRORLOG: This AP is not supported in controller
version 6.0.199.4 ---->What's mean that? Is it compatible the ap with the WLC? ¿Es compatible el AP con el WLC?
*Apr 19 23:10:20.354: %CAPWAP-5-CHANGED: CAPWAP changed state to CFG
*Apr 19 23:10:20.355: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 209
.165.200.230:5246
*Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 19 23:10:20.356: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Apr 19 23:10:20.412: %CAPWAP-3-ERRORLOG: Dropping dtls packet since session is
not established
Maybe you are looking for
-
How to recover deleted files from a shared volume?
Setup - Mac Mini Server (OSX 10.8.4, Server 2.2.1(169)), 256GB Flash drive, System data only. External 8TB G-Raid holds all business data, backed up to a LaCie 6TB Quadra using Intego Backup Manager Pro 1.0.9. The G-Raid has two folders 0_Clients a
-
Acrobat Batch Plug-in and accessing user input parameters
I have written a plug-in for acrobat 9 and need to retreive the value stored in the "select output location" field from the default "edit batch sequence" dialog. How can I get a handle to the "edit batch sequence" dialog and the dialog's user input f
-
I am evaluating RoboHelp as a possible way to create help files (probably will end up being .CHM files). We'd like to be able to go from the files used for our printed documentation, which are generated using LaTeX and output as PDF files. We use LaT
-
My website page won't display in IE7 and goes wierd in Safari
Hi, I am working on a website( www.katecornish.co.uk ) for somebody. In Firefox the whole website looks fine. In IE the 'Attic 09' page (www.katecornish.co.uk/Attic09.html) does not display at all, I just get a blank page. In Safari this same page
-
JDev CVS integration Compare error
I have successfully integrated JDev 10g 9.0.5.0.0.1375 with a CVS server. When I attempt to compare two different versions in the history of an XML file using the "Compare...." option, the following class cast exception is thrown and the compare fail