Error installing Developer suite 10g

Hello,i have downloaded the oracle developer suite 10g 10.1.2.0.2
i get this error whenever i try to start the setup program :
Error in writing to directory C:\Documents And settings\<MY_CURRENT_USER>\Local Settings\TEMP\OraInstall...
please ensure that this directory is writable and has at least 55 MB of disk space
Installation cannot continue
i can see there is a OraInstall<time> directory with a size of app. 50 MB created under my local Documents and Settings\<MY_CURRENT_USER>\LOCAL~1\TEMP
Im using Windows XP sp2, and i have 10g Database Release 1 installed.
i've tried with another account on another similar XP station ( same configuration on both machines ) and i got the same error.
Any help is appreciated.
Thank you

Hi,
Do you have Admin access to the PC? Have you tried using a different TEMP directory?
Rod West

Similar Messages

Error Installing Developer suite 10g in windows 7

hi everyone,
I hve installed oracle 11g R.2 in my machine, now when i try to install oracle developer suite 10g directly using setup.exe it becomes not responding. I hve changed the compatibility mode, since getting the same. So i tried with oracle universal installer 11g but it shows an error and stops installing
error :
some components in the stage area have stage version less than 10.2.0.0.0. please ensure that all the components have their stage version greater than or equal to 10.2.0.0.0.
Pls help me to install this. I need oracle forms and reports.
Thanks for the reply.

Hi,
Please refer links below:
http://windows7bugs.wordpress.com/2010/02/18/install-oracle-10g-onward-database-developer-on-windows-7/
How to Install Oracle 10g in Windows 7 Home premium 64bit operating system
Hope this helps :)
thanks,
X A H E E R

Install developer suite 10g on windows 7

hi to all,
I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

How to install developer Suite 10g on linux 9

i am trying to install developer suite 10g on linux 9 ... but i am unable to it.please suggest

Hi,
Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
regards

To install developer suite 10g wondows2003

hi to all,
I would like to install developer suite 10g on my notebook windows2003 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Installing Developer Suite 10g R2 on Windows Vista failed !!

It seems Oracle has a new challenge of producing a new edition of Developer Suite that will install on Windows newest falvour, Vista. I installed Oracle db 11g on my Vista O.S. and everything runs normally. But my Developer Suite 10g R2 failed to launch setup.exe, giving me the following error:
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2007-11-16_06-40-54PM.log
Please press Enter to exit...
Any idea to solve the problem? Or it's all that I have to wait Oracle for an 11g Developer Suite version that is supported by Vista??!
Thanks!

Either your tnsnames.ora file that Forms is using is not set up properly to connect to your database, or else you need to install the Microsoft Loopback Adapter.
I have set up laptops with a Loopback Adapter, so Forms will connect regardless of the Windows computer name. If the computer name is included in the tnsnames entry for your on-board database, then you probably don't need it.
When you installed the 11g database, the installation set up a tnsnames.ora file with an entry for that database. First, try copying the entry into the corresponding tnsnames.ora file used by Forms.
In my system, I have four distinct tnsnames.ora files, each one is a duplicate of the others. Whenever I need to change an entry, I do it in one of them, then do a Save As three times to replace the other three. I use these comment lines at the top of the file to help me:
#-- For reference, save as: C:\oracle\tnsnames___ref.ora
#-- For Forms6i,   save as: C:\oracle\orant\NET80\admin\tnsnames.ora
#-- For Forms10,   save as: C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
#-- For SQL Plus10,save as: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.oraWithin the laptop running withOUT the loopback adapter, this is the entry for the on-board Oracle 10 database:
#-- Laptop           Could use: (HOST = Steve-PC) / 127.0.0.1
ORCL =          (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)
                                  (HOST = 127.0.0.1)
                                  (PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)
                          (SERVICE_NAME = orcl) ) )Note the replacement of the HOST entry from the Windows computer name with the generic IP address for the local platform.

Installing Developer Suite 10g for Windows

As part of a prototype test for upgrading to 10g we have installed Oracle 9i database onto a Windows XP PC and are now trying to install the developer suite 10g.
The ORACLE_HOME directory for the DB is D:\Oracle\ora92.
The Oracle Uinversal Installer defaults to this directory for Oracle Home when we try to install the 10g software, but we then get the following error:
Dependencies
Oracle Developer SUite 10g cannot be installed into an existing Oracle 9i 9.2.0.1.0 or higher Oracle Home.
Could you advise please.

Yes, and got the message - install has encountered an error while attempting to verify your virtual memory settings....
We have changed the paging size for the D: drive where we were trying to load to - and it has loaded OK now thanks.

Are BI Beans already installed with Developer Suite 10g R2?

I wish to use BI Beans in Forms Builder 10g R2. Do I have to download the BI Beans separately or it has already been included when I install Developer Suite 10g R2? Thanks.

If you are planning to use Forms against a relational data source then you will only be able to use the BI Graph bean as part of your development. The graph bean is automatically shipped with JDeveloper and there is no need to install BI Beans.
There are lots of examples of how to use the graph bean with relational data sources and these can be found on the following sites:
OTN Reports Home Page - Links to the FAQ on graphing
BI Blog - posting on how to use the graph bean
BI10gR2 samples - contains a JSP example of how to use the graph bean with a relational and XML data source.
Forms does not support multi-dimensional data sources so there is no way to use the other BI Beans components such as query builder, calculation builder, crosstab beans unless you are using a multi-dimensional data source which requires use of Oracle OLAP (preferably 10gR2).
What do you want to build with BI Beans?
Keith Laker
Oracle EMEA Consulting
BI Blog: http://oraclebi.blogspot.com/
DM Blog: http://oracledmt.blogspot.com/
BI on Oracle: http://www.oracle.com/bi/
BI on OTN: http://www.oracle.com/technology/products/bi/
BI Samples: http://www.oracle.com/technology/products/bi/samples/

Developer Suit 10g Installation

I am trying to install Developer Suit 10g. My configuration is 1024 MB RAM, 80 GB HDD and AMD Athlon 3400+ processor. The OS is XP Home. Database 10g is already installed and running on the same machine.
In the very begining Universal Installer is giving me this error message, "Invalid staging area. There is no top level components for Windos NT, Windos 2000 available for installation in this staging area."
My question is can I install Developer on XP Home?

select deferent folder and defferent home for developer. by default installer select the home where you have install database. you should change it.

Connectivity and Installation Problem in Developer suite 10g

Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
6. There is no middle tier in this case. Only One server as domain
and client pcs.
Please guide me,matter urgent.
Thanks in advance

Regarding this point -
1.
Then you should be able, for testing purposes, to do the same from other Clients.
Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
2.
For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
(We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
Please explain the steps to proceed .
thank you

Appropriate windows platform for developer suit 10g release 2

hi
i've installed developer suit 10g on windows xp sp2 but it does not work properly
can anyone tell me which is appropriate windows platform for developer suit 10g release 2
thank U

Hello,
another solution : edit the file cauprefs.ora in ORACLE_HOME and modify the following values :
Reports.root_ht = 480
Reports.root_max = No
Reports.root_wd = 640
Reports.root_x = 0
Reports.root_y = 0
Regards

Developer Suit 10g As Application Server

Can i use 10g Developer Suit as my application server?
i mean installing developer suit 10g and keeping oc4j running and report services running on my server machine serve the purpose of an application server?
i have tried installing and configuring report services on 10g Application Server after getting tired i am planning to do this.
Thanx in advance

Developer suite can not be officially used as production server since it is light weight . It may not handle the load. If it is for limited number of users
go for it.
Rajehs Alex

Error on installing Oracle Developer Suite 10g (10.1.2.0.2)

I try to install:
Oracle Developer Suite 10g (10.1.2.0.2), and lick on the set up icon. Then
I get error message:
"Actuall checking SWAP space: 1440 MB availabe, 1535 MB required... Failed "
I don't understand what is meant, and how to fix it?
I have C:\ dirve free space 11.1GB, and G:\ drive free space 463 GB. I try to install the package in G: dirve. I use MS Window XP.
Thank you
Alex

Alex-
Increase your Windows paging file by going to Control Panel->System->Advanced(tab)->Performance Settings(button)->Advanced(tab)->Virtual Memory. Change the Initial size to be at least 1535MB.
Dan

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

Getting Error while running Developer Suite 10g forms.

After designing the form when I'm trying to run the form I'm getting the error message The Java Runtime Environment Cannot be loaded from <\bin\client\jvm.dll>. I have installed oracle database 11g and developer suite 10g in Windows XP Prof. Pc. Please guite some one. Trying from last 2 days but nothing is happening.

You may not have admin rights to install Jinitiator on your box.
Cheers

Error installing Developer suite 10g

Similar Messages

Maybe you are looking for