Error installing DS 4.0: "previous operation did not complete"

When I try to install DS 4.0 I get the following error:
Installer has detected that a previous operation did not complete. Do you want to resume?
I had previously installed Information Platform Services 4.0 but the install crashed. Now I am unable to uninstall IPS and I can't install anything else. ( trying to uninstall IPS from Programs and Features just blinks and then doesn't do anything)
Has anyone faced this issue? Can someone PLEASE tell me how to uninstall IPS and/or circumvent the error so I can get DS installed?

I had the same problem a while ago. I solved this by
1. Go to folder C:\Program Files (x86)\SAP BusinessObjects\InstallData
2. Under this file you'll find "InstallManifest.sqlite" file. You need to open this file through SQLite editor. You can download it https://addons.mozilla.org/en-US/firefox/addon/sqlite-manager/ as an add-on to your firefox.
3. There are 13 tables in this database. Go to "DUTransaction" table. You will see "Committed" column change the value if there is any zero 0 value to 1.
4. Save and close the file.
5. Restart your installation.
This should solve your problems.

Similar Messages

Installer has detected that a previous operation did not complete with another user

Hi experts,
I actually have a SAP Business Objects 4.0 SP4 and I try to upgrade to 4.1 SP2.
The documents I found on the topic clearly let me understand that it could be totally and easily achieved.
However, I keep having this error message :
In the CMC, I successfully disabled all the servers (except the CMS) then I restarted the SIA in order to kill all the active sessions.
Could you please give me some counsels?
Thanks a lot!

That's OK, I finally found the solution :
SAP BO 4.0 SP02 update to SP05 "Incomplete Operation Detected"
Thanks!

Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057))

We are trying to convert a physical windows 2003 R2 32 bit server to a VM using VMM 2008 R2 with all updates installed. Each time when we scan the system on VMM, it gets this message: Error (2901) The operation did not complete successfully because of
a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)). If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

Hi Sir,
>> If I use disk2vhd.exe to convert only C drive, I get parameter is incorrect. Any ideas?
>> gets this message: Error (2901) The operation did not complete successfully because of a parameter or call sequence that is not valid. (The parameter is incorrect (0x80070057)
Please refer to following article regarding this error :
http://blogs.technet.com/b/hugofe/archive/2010/07/09/abe.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

2.0 - 0x803d0006 - The Operation Did not complete within the time allotted

I integrated MBAM 2.0 into ConfMgr 2012 SP1 on Srv2008R2 & SQL 2008R2 box. All MBAM components lying on the same server. Network is encrypted, using https, clients and server have certificates from inside PKI.
- Manual encryption attempt with MBAM client fails ends with "An error has occurred". During this, there is no error codes anywhere.
- During automatic triggering of MBAM client, 0x803d0006 comes up into event viewer.
- Laptops are partitioned with extra Bitlocker partition as they should be
- Laptops are able to communicate with
MBAMRecoveryAndHardwareService/CoreService.svc
- Group Policies are applied with necassary MBAM settings. Reporting point is disabled because ConfMgr integration takes care of that.
- During the error on a client side, I don´t see any logs in event viewer on a server side

I solved this By creating GPO policies only via MBAM node. Previously I had a mixup with policies, because I had configured Bitlocker Encryption policies also. With MBAM, only MBAM´s own policies should be configured.
So this error massage is occured only because of GPO conflict. I also noticed, that you can easily mix up things with MBAM´s policies also, if configuring different encryption settings and causing conflict between them (like encryption package, keys etc).
So if you don´t know, what you are doing (like me, hehe), leave encryption polices as default.

(-200474): Specified operation did not complete, because the specified timeout expired

What are the conditions under which this error (-200474) occurs in the NI-DAQmx driver?
I am looking for something similar to this: http://digital.ni.com/public.nsf/allkb/485201B647950BF886257537006CEB89. Also a more detailed description of this error would be nice.
I encountered this error using a PCI MIO-16E-4 board while reading from an analog input channel. I have a loop that continuously measures values. To obtain a value, I start a task, average a number of 10 000 samples, and then stop that task, and so the loop repeats itself again.

Hi Casper,
The interesting thing is that my application works fine for a number of hours (more than 5-10 h) and then at some point, I get this error.
>How fast are you trying acquire your data?
Once every second I start a task, read 10 000 individual samples, average them, and then stop the task. So I guess it's pretty intensive.
>This is error tells you there are not enough samples to read within the specified timeout.
It can be that during the starting and stoping the task, one of the DAQmxReadAnalogScalarF64 calls returns me this error at some point, because the driver doesn't have time to give me a value anymore. I will try to lower the 1Hz sampling rate a bit, but I will leave the sequential DAQmxReadAnalogScalarF64 calls running at the speed of my app.
A possible solution to my problem would be to configure the driver to average 10 000 samples for me, and then return me a single value. I would appreciate any idea of how to configure the task to do this using the NI-DAQmx API.
Could you also give me some plausible scenarios which could result in an occurrence of this error?
Regards,
Cristian

Random file uploads fail - LDS (LDS did not complete request)

Hello,
It's happening on about 15% of our uploads to FCServer where we see the error, ""LDS (LDS did not complete request)". It's happening on both FCP project uploads and MOVs'.
Thanks!

i've been getting the error while trying to write XML
in the job detail i don't get a Destination Filename:, then STATUS: FAIL
and at the bottom:
ERROR: E_COM Error in comms channel to LDS (LDS did not complete request)

ITunes 7 - Install of Quicktime did not complete successfully error on inst

I have been running the iTunes installer 7.0.2.16 and keep getting the following error.
"The installation of Quicktime did not complete successfully. iTunes requires Quicktime."
I had iTunes 6.0.5 installed and have tried uninstalling it and doing the install. No Luck! I have tried installing Quicktime 7.1.3 seperately and then iTunes 7 with no luck as well. The Quicktime 7.1.3 install works fine. I have read the vaious "support" topics from Apple and have tried the "Complete Removal" of all previous files with no luck. I have went through the registry and removed various Quicktime and iTunes entries with no luck. I have ALL Microsoft updates and tried diabling all firewall and virus type programs. I have started the computer with all system tray items turned off and still NO LUCK!
I am an IT guy by profession and have no problems with any other software or computer. My only guess is that Apple put some Quicktime check in the install routine that is not working. The install does not even get to the file installation portion, it is in the initial "checking" phases of the install.
I have had this problem for a couple of weeks and this discussion is a final chance to get this working before I too return the iPod that was purchased for XMAS like so many other have posted.
If you are having the same problem, please post your thoughts here as well. I know there are more of us based on the 50-60 posts I have read!
APPLE Would you respond with a fix or give me a seperate install of iTunes. I can install Quicktime myself!!!!!!!

Thank you for your response, but I have went through that list of things to do and so far nothing. I have done the install of the MS Uninstall tool and still nothing. I looked for the QuicktimeVR and other file and they are gone. Quicktime installed perfectly by itself. It is the iTunes + Quicktime that says that it is not installed correctly. Why would the new Quicktime install and then the iTunes installs and says it is not installed? Shouldn't it locate the install and see that it is installed?
I work in software and been working on computers for many years, this is a check that is done when you build the install routine and the version checker. Can I please just get a stand-alone installer of iTunes without the QT included? You must have one somewhere.....
Windows XP Pro

My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. Why?

My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?

Hey Manaskala,
First point of call on all grey screen issues is the following:
http://support.apple.com/kb/TS2570
Given this issue has appeared after a software update, I'd advise you do the following instead though:
1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
3. Get out of Disk Utility, and click Reinstall Mac OS X.
4. When asked where, choose to install onto your external hard drive.
5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
-Users.
-Applications.
-Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
10. Reboot the machine holding 'Option', go to recovery HD.
11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
12. When this is complete, make another admin user called test and password test, like you did last time.
13. Run Software Update from the  menu of your Mac.
14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
15. Go to Finder up next to the  and choose File -> New Finder Window.
16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
18. This might take a while.
19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
20. Click the '+' sign, and make a new administrator user.
21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
25. ???????
26. Profit.
There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine!

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??

Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect

New Galaxy 5s. Trying to connect to a guest wireless that routes browser to a login screen. The wireless will not connect (gives authentication error), so will not pull up browser window. My previous Android did not have this problem (it would connect and immediately reroute to the login screeen).

Would you please try manually set the DNS address on client NIC to the IP of your server, then try run the connector again?

Move operation did not succeed

Hi!
Trying to get Qmaster working but having some issues. The closest I have is ending up with "move operation did not succeed" and a file that contains the last 10 frames..
Well, my setup. Tried different things but right now I have 2 machines, 1 is running Shake and the other one is running a QuickCluster. Only thing I have done with the Quickcluster setup is that I have changed the cluster storage to a different local drive.
On the Shake machine I have the script with all the files in a folder on a mediadrive that is read/write for everyone that wants it - this drive is mounted on the Quickcluster. The only naming convention for the mediafile paths that work in the script is /Volume/mediadrive/path to files. The file out node is also pointing to the same folder on the shared drive.
So, well, when I submitt the batch to the QuickCluster it starts working but complains about "move operation did not succeed". The test script is 30 frames and it splits that up on to 3x10 threads. I end up with a file that includes the last 10 frames..
Any1 got any ideas?
Thanks,
Lars Petter

You need shake on every node in the cluster. That move operation did not succeed is actually harmelss from what I can tell. If you are using Shake and doing QT FileOut nodes, and you don't have Shake installed on all the machines I can see how you ended up with a 10 frame file.
Check /Library/Logs/Qmaster/service/com.apple.qmaster.executor*.log and see what the error is.

Won't let me open itunes and it keeps saying Error itunes needs to be reinstalled did not complete. so i did and still the same message pops up. i even tried to unistall everything and re do it. nothing works

try to open itunes and a error message pops un asking to reinstall that it did not complete. I re did it and same thing pops up. I tried to uninstall everything start from scratch, still same message pops up HELP

Hey KarlaOrtega23,
Thanks for the question. I understand that you are experiencing issues with iTunes on your PC. I also understand that you have already uninstalled iTunes and the problem persists. While you have already attempted these steps, there are some specific details outlined in the following resource that may help to lead to a resolution. For example, make sure that you have uninstalled all components of iTunes in the order listed. Uninstalling the components in a different order, or only uninstalling some of these may have unintended affects:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks,
Matt M.

Hey ! here is my question actually i made an apple id but i did not complete the information previously and now i want to make my id without creditcard but it is not showing me the NONE option what to do please help?

hey ! here is my question actually i made an apple id but i did not complete the information previously and now i want to make my id without creditcard but it is not showing me the NONE option what to do please help?

lvlajicl wrote:
I Have An Apple ID And It Has 10$ In It
But When I Want To Buy Pile Of Gems In Clash Of Clans For 5$ It Gives me an error
Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Note:
Some In-App Purchases require a Credit Card.

Sorry the answer to my previous question did not help....when trying to get app message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

Sorry the answer to my previous question did not help....when trying to get new app installed on iPad message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?

Whatever the reasons are that you think the problem exists, you will not be able to resolve it on your own. Did you see this at the bottom of the support article that I suggested that you read?
Additional Information
If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance.
You should probably contact iTunes Support.

I need some help uninstalling Acrobat 8 that did not completly install because of I believe my Windo

I need some help removing, uninstalling Adobe Acrobat 8 that did not completely install because of I believe my computers operating system Windows 7 Ultimate. I purchased Adobe Acrobat XI and it will not install until I remove the old Adobe Acrobat 8.

Hi Wzachare,
http://helpx.adobe.com/acrobat/kb/manually-remove-acrobat-8-windows.html may help.
Thanks!
Eshant

Error installing DS 4.0: "previous operation did not complete"

Similar Messages

Maybe you are looking for