Error installing DS10g 10.1.2.0.2 on windows 7 (64bit)

Hello,
I have on error when installing.
Error.
Javaw.exe - Entry Point Not Found.
The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL.
Any suggestions that will help me to solve it?
Thank You.
Charles.

Did you look at this thread: How to install Oracle Developer Suite 10g on Windows 7 (64-bit) ?
cheers

Similar Messages

Error installing new 4630 e all in one to windows xp workstation with usb

error installing new 4630 e all in one to windows xp workstation with usb
cannot install this hardware error occured during this installation of the device the specified module could not be found
local printer trying to connect with usb. just purchased the printers.
Tried:
loading hp dectect to detect printer, can not detect it
loaded diagnostic says nothing is wrong
loaded drivers form hp website
if i go into device manager the comptuers does see the printer there, with a ! next to it saying drivers are not loaded, but cant get the drivers to load.
as the instructions say in the book received with the printer. to troubleshoot do this... which I did, uninstalled rebooted, removed cd and unplug usb, loaded software then pluged in usb and still get same error, cannot install this hardware error occured during this installation of the device the specified module could not be found..
someone help please

I also just bought a 4630 and have the same problem (Windows XP) BUT after finally figuring out how to enter numbers on the key pad I was able to get the device to recognize and accept my wireless connection HOWEVER when attempting to print the software claims it could not communicate with the printer BUT the printer worked just fine and I was able to get at least 8 pages of high quality text.
So, it looks as though HP is SNAFU, the left hand does not know what the right hand is doing.
I'll keep playing with the software to see if I can clean up this mess.

Error installing Sun ONE Directory Server 5.2 under Windows 2000 SP3

Hi,
When I attempt to install the Sun ONE Directory Server 5.2 under Windows 2000 Server SP3, I get the following errors:
Installing Sun ONE Server Basic System Libraries
Installed:C:\WINNT\system32\icudt2.dll
Installed:C:\WINNT\system32\icuin2.dll
Installed:C:\WINNT\system32\icuuc2.dll
Installed:C:\WINNT\system32\libadminutil52.dll
Installed:C:\WINNT\system32\libadmsslutil52.dll
Uninstalling C:\WINNT\System32\icudt2.dll
Uninstalling C:\WINNT\System32\icuin2.dll
Uninstalling C:\WINNT\System32\icuuc2.dll
Uninstalling C:\WINNT\System32\libadminutil52.dll
Uninstalling C:\WINNT\System32\libadmsslutil52.dll
Uninstalling C:\WINNT\System32\libnspr4.dll
Uninstalling C:\WINNT\System32\libplc4.dll
Uninstalling C:\WINNT\System32\libplds4.dll
Uninstalling C:\WINNT\System32\nsldap32v50.dll
Uninstalling C:\WINNT\System32\nsldappr32v50.dll
Uninstalling C:\WINNT\System32\nsldapssl32v50.dll
Uninstalling C:\WINNT\System32\nss3.dll
Uninstalling C:\WINNT\System32\sasl32.dll
Uninstalling C:\WINNT\System32\smime3.dll
Uninstalling C:\WINNT\System32\ssl3.dll
Product Install Failed: java.io.FileNotFoundException: C:\WINNT\System32\libnspr4.dll (Access is denied)
I've checked, and this file does not pre-exist under WINNT\System32.
Any ideas why I'm getting this error? Is this a bug in the installer?
Cheers,
Scott

IIRC this file, sasl32.dll, should get installed onto %WINDIR%\system32 when you install DS5.2 windows version.
You may run WinZIP and File/Open "d52diu.zip" (DS5.2 zip image) and look for "nsbasesys.zip", double click to Open it and you should find "sasl32.dll" there.
Gary

Error Installing JDeveloper 11.1.2.2.0 in windows 7

Hello friends,
I have a problem installing JDeveloper Studio for 64-bit Windows, the installer used is as follows> jdevstudio11122install.exe
Here more details of the error message:
Could not extract the archive since it is corrupted error code = 2
Any recommendations to successfully complete the installation process.
Very grateful...
Edited by: Luis_vkacito on Nov 14, 2012 12:43 PM

Friend,
Installer file size is:
Size: *1.23 GB (1,323,085,837 bytes).*
Size on disk: *1.23 GB (1,323,089,920 bytes).*
I tested also disabling antivirus on my PC and disconnect the power cord before starting the installation of JDeveloper. In both tests the result was the same.
Some additional recommendations to solve this case.
Thank you for supporting.
Edited by: Luis_vkacito on Nov 15, 2012 6:48 AM

Error installing Service Provider Foundation- pre-requisite for configuring Windows Azure Pack

We are trying to setup lab at our premises to get hands on with WAP and explore.
We are able to install all the pre-requisite software’s except the "Service Provider Foundation (SPF)" component. Using SPF we are trying to configure the WAP that is installed successfully.
Software installed on Target machine-
Win Server 2012 OS.
Server roles enabled on host-Hyper-V,IIS, WSUS, File and storage services.
SQl Server W2k12-sp1-Standard edition in mixed authentication mode.
SCVMM.
WAP.
Issue description:-
We try to run the 'Orchestatorsetup.exe' with both Local admin/domain admin account. Pre-requisite check during the installation of SPF is successful.
When we select "Install” button, Setup.exe is getting terminated halfway through abruptly.
We tried to analyze the attached error log file extract.
[061C:0F60][2014-12-02T12:30:03.146+05:30]: Applying package: Id.Setup.msi, action: Install, path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\Microsoft.SystemCenter.Foundation.Setup.msi, arguments: ' INSTALLLOCATION="C:\inetpub"
SCVMMCHECKED="1" SCDPMCHECKED="0" SCOMCHECKED="0" SCSMCHECKED="0" WEBSITE_NAME="SPF" PORT_NUMBER="8090" SPECIFY_CERTIFICATE="0" CERTIFICATE_STORE="My" CERTIFICATE_SERIAL="1714309174975BA5442B9ADF17FB6657"
USE_SSL="1" SCVMM_APPPOOL_NAME="VMM" SCVMM_DIRECTORY_NAME="VMM" SCVMM_USERNAME_VALUE="NETWORK SERVICE" SCVMM_DOMAIN_VALUE="NT AUTHORITY" SCVMM_PASSWORD_VALUE="" SCADMIN_APPPOOL_NAME="Admin"
SCADMIN_DIRECTORY_NAME="Admin" SCADMIN_USERNAME_VALUE="NETWORK SERVICE" SCADMIN_DOMAIN_VALUE="NT AUTHORITY" SCADMIN_PASSWORD_VALUE="" SCPROVIDER_APPPOOL_NAME="Provider" SCPROVIDER_DIRECTORY_NAME="Provider"
SCPROVIDER_USERNAME_VALUE="NETWORK SERVICE" SCPROVIDER_DOMAIN_VALUE="NT AUTHORITY" SCPROVIDER_PASSWORD_VALUE="" SCUSAGE_APPPOOL_NAME="Usage" SCUSAGE_DIRECTORY_NAME="Usage" SCUSAGE_USERNAME_VALUE="NETWORK
SERVICE" SCUSAGE_DOMAIN_VALUE="NT AUTHORITY" SCUSAGE_PASSWORD_VALUE="" SCDPM_APPPOOL_NAME="DPM" SCDPM_DIRECTORY_NAME="DPM" SCDPM_USERNAME_VALUE="NETWORK SERVICE" SCDPM_DOMAIN_VALUE="NT AUTHORITY"
SCDPM_PASSWORD_VALUE="" DATABASE_SERVER="localhost" DATABASE_PORT="1433" DATABASE_EXISTS="False" DATABASE_NAME="SCSPFDB" DPM_SECURITYGROUPUSERS="WAPLABS\vmmadmin" VMM_SECURITYGROUPUSERS="WAPLABS\vmmadmin"
ADMIN_SECURITYGROUPUSERS="WAPLABS\vmmadmin" PROVIDER_SECURITYGROUPUSERS="WAPLABS\vmmadmin" USAGE_SECURITYGROUPUSERS="WAPLABS\vmmadmin" ARPSYSTEMCOMPONENT ="1"'
[061C:0F60][2014-12-02T12:30:24.948+05:30]: Error 0x80070643: Failed to install MSI package.
[061C:0F60][2014-12-02T12:30:24.949+05:30]: Error 0x80070643: Failed to execute MSI package.
[18C0:17D4][2014-12-02T12:30:24.950+05:30]: Error 0x80070643: Failed to configure per-machine MSI package.
[18C0:17D4][2014-12-02T12:30:24.952+05:30]: Error 0x80070643: Failed to execute MSI package.
[061C:0F60][2014-12-02T12:30:24.952+05:30]: Removing cached package: {69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0, from path: C:\ProgramData\Package Cache\{69344E86-7183-4384-A230-499E9914BE14}v7.2.1902.0\
[18C0:17D4][2014-12-02T12:30:24.957+05:30]: EverestBootstrapperApplication_ExecuteComplete
[18C0:17D4][2014-12-02T12:30:24.958+05:30]: MSI execution completed
[18C0:17D4][2014-12-02T12:30:24.963+05:30]: Installation finished
Workaround tried:-
1. As per the TechNet MS site changing the time zone to Pacific/London time zone. Tried it but issue persists.
2. Tried to run the setup.exe using domain account and local admin account.
Any help appreciated much..

UAC was turned off and installation was tried using local admin account. The error log suggested it was failing to create a firewall exception rule for 8090/UDP port. Windows Firewall service was enabled. SPF got installed successfully.
Thanks Darryl for helping us break the deadlock :)

Error installing NI TPC Service on a 3rd party windows XPe Based Touch Panel

Hi,
First of all sorry for my English.
I'm having trouble when i try to install NI TPC SERVICE on a 3rd party Touch Panel that runs Windows XPe (Embedded).
I have tried lot of time. I'm installing the msi application for XPe from the folder "NI_TP_Service" of the Installation Path for LabVIEW 8.6 Touch Panel Module.
The installer file hungs after installing the service and just when it tries to initialize it and I get a Error Windows that says "Error 1920. Service 'NI TPC Service' (NITPCService) falied to start. Verify that you have sufficient privileges to start system services."
I'm logged as Administrator, and I don't know what to do.
If anyone know what can i do I'll be pleased in hearing the answer.
Regards

Hi AlexDarsigny,
You will need either the Touch Panel Module or the Datalogging and Supervisory Control Module (DSC). Either of these modules will allow you to deploy and install NI software to your touch panel. They also include many other features for developing those applications. You will also need a deployment license for any non-NI touch panel that you plan on deploying the applications to. The other software needed on the touch panel itself will include the LabVIEW Run-Time Engine and the NI TPC Service. The following link has some information on this:
http://zone.ni.com/reference/en-XX/help/371618H-01/lvxpe/tpc_install_tpc_srvc/
Once deployed, the program will run as a stand-alone application that can be started from the HMI itself. Of course this depends on the functionality you create within the application, just like you would for any standard LabVIEW application.
David C

Error Installing Citadel ODBC Driver 3.0.9 On Windows XP

Hello,
I am looking to read some data out of a Lookout database which is a Citadel 3 database. I am having an issue installing the Citadel ODBC Driver 3.0.9 on Windows XP (located here: http://www.ni.com/download/citadel-odbc-driver-3.0.9/512/en/). Everytime I run the setup.exe I get the following error:
I have tried running the setup program in compatitibility mode for Windows 2000, 98, 95, and NT with the same result. Is there something I can do to manually install the driver?
Thank you,
Luke

May have to install on a Win 2000 virtual machine alongside a newer database to convert to Citadel 4/5
Forshock - Consult.Develop.Solve.

Error Installing Flash ActiveX 12.0.0.77 on Windows 8.1

We use SCUP 2011 to deploy our Flash Updates. Today I deployed the ActiveX 12.0.0.77 to our systems, both Windows 7 and Windows 8.1 and found errors with the deployments to Windows 8.1. I realized that the SCUP update, from the Adobe Flash Catalog shouldn't have been deployed to Windows 8.1 as Microsoft supplies these updates now. I pulled the deployment back and now I want to change the Installable rules to prevent updating any Windows 8.x / Server 2012 systems.
Is it as simple as changing the Installable Rules to Less Than or Equal to Windows 7 SP1? What is the definition of Custom Version? This is what I currently have...

Please check this flash player admin guide for the details,
http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/flashplayer/pdfs/flas h_player_12_0_admin_guide.pdf

Unable to install itunes 10.5 after update issue. "windows installer package error"

So when the update for itunes happened, it wiped my ipod, and then my ipod would not work with itunes. So I uninstalled itunes and tried to reinstall it and it gives me that error message. "There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor." I have tried all the fixes from deleting everything to running command prompts. I think i tried everything.
Method 1: Right click on the setup file and, from the drop down menu, select 'run as administrator'
Method 2: Open command prompt in elevated mode and, then unregistered and re-register Windows Installer.
1. In the Start search box and then type 'cmd', when the command application appears at the top of the start window, right click on it and, from the drop down menu, select 'run as administrator' and type each of these commands in the command prompt and press Enter
   • msiexec /unregister
   • msiexec /regserver
msiexec.exe belongs to the Windows Installer Component and is used to install new programs that use Windows Installer package files (MSI)
http://windows.microsoft.com/en-US/windows7/Command-Prompt-frequently-asked-ques tions
Method 3: Start the Windows Installer service
1. Click Start, type Services.msc and press {ENTER}
2. Double-click Windows Installer
3. Set the Startup type of Windows Installer to Manual
4. Click Start to start the service. Note down the error message if any.
5. Click OK.
If the above mentioned steps don’t resolve the issue, then
follow the steps and check whether you can resolve the issue:
Method 4: Empty your Temp directory and restart
1.       Choose Start > Computer
2.       In Computer, open the "C:" drive.
3.       Open the Users folder.
4.       Double-click the folder titled with your username.
5.       If you see an AppData folder, skip to step 10. If you don't see an AppData folder, proceed to the next step.
6.       Choose Organize > Folder and Search Options.
7.       Click the View tab.
8.       Select the option to "Show hidden files and folders." (In Windows 7 this option will be called "Show hidden files, folders, and drives").
9.       Click OK.
10.    Double-click the AppData folder to open it. If Windows needs your permission to continue click Continue.
11.    Double-click the Local folder to open it.
12.    Right-click on the Temp folder and choose Delete.
13.    In the confirmation dialog that appears click Yes.
14.    If you are unable to delete the Temp folder, close all programs, especially those in the Notification area ("System Tray") of the Windows Task bar and repeat step 12.
15.    Restart your computer.
Method 5: Removing iTunes
Note: iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes.
1.       Quit iTunes.
2.       From the Start menu, click Control Panel.
3.       In Control Panel, click Uninstall a program. The Programs and Features Control Panel opens.
Alternately, in Classic Panel of Control Panel, click Programs and Features.
4.       Select iTunes from the list of currently installed programs, then click Uninstall.
5.       When asked if you would like to remove iTunes, click Yes.
6.       After the uninstallation is complete, do not restart your computer if you are prompted to.
7.       If other program entries were listed for iTunes in Programs and Features remove those as well.
8.       In Programs and Features, also remove any iPod Updater applications that are listed in the same fashion as you removed iTunes.
Method 6: You may also try downloading the Windows Installer Cleanup utility and run that to remove the leftover ITunes installer files that may be causing issues with your current installation.
You may refer the following article to download the Windows Installer Cleanup Utility:
http://support.microsoft.com/kb/290301
1. Click on Start > All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
2. Select iTunes from the list and click Remove. If you have multiple iTunes files, remove all of them.
3. Once you have completed the above steps to Empty your Temp directory, Completely remove iTunes and QuickTime, and Clean up iTunes installer files on the computer, you can install the latest version of iTunes from
To this:
This solution correct my bug.
I had the same error in with the i-tunes installation and i did this and it worked.... This works for any i tunes that fails to install itself on 64 Bit
You have to go into your registry.
Start, run, type in “regedit”.
Next go to HKEY_LOCAL_MACHINE.
SYSTEM
CurrentControlSet
Services
MSIServer
To the right you’ll see WOW64. Double click on it, or right click on it and click on modify. Change the setting from 1 to 0.
Next, go to the start menu again and type in the search box: “services.msc”.
Look for and find the Windows Installer service.
Double click on it and tell it to stop. Next, tell it to start.
You should now be able to install your programs.
------ By the way I dont have the WOW64 option is not available.
I was able to install quick time just fine. All of the other apple software associated with itunes installed fine but itunes did not. Im not sure if there is a virus that could do this. I didnt delete anything but apple folders.
I have tried other things but i cant remember exactly there were.
When the install process for itunes is running it changes with the error message shows up during install.
Thanks.

I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
Apple helps you find Original Sin with the Windows.

Error installing Adobe Flash 11 "launchfail" after enable AppLocker

Error installing Adobe Flash 11 "launchfail" after enable AppLocker please help. I have allow everyone from publisher for .exe and .msi

I'll ask around, but I don't have any experience with AppLocker. Have you gone through all of the documentation here?
http://technet.microsoft.com/en-us/library/dd723678(v=ws.10).aspx

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this

When trying to update my CC apps, the update fails. I get this error: Update Failed. There was an error installing this update. Please try again later or connect customer support. This is currently happening for InDesign, Photoshop and Bridge. I had this problem previous and was able to fix by doing a complete wipe of my computer and reinstalling CC. However, I should not have to wipe my computer clean everytime I need to do a CC update. HELP!

Hi,
Please download the updates directly from the link below:
WIN: All Adobe CC 2014 Updates: The Direct Download Links for Windows | ProDesignTools
MAC: All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
Regards,
Sheena

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.

I am having a issue installing Adobe Acrobat XI. I am running Windows 8.1. When go to install it gets an error. The error is with transform in registry and will not install product. I am looking at how I can fix this registry problem.
I have tried to uninstall all Abode Acrobat installations but one file remains and refuses to be uninstalled. It gives me this error : Error applying Transforms . Verify that specified paths are valid. It was installed on Sept 18 2014. I have downloaded a Transform update but it tells I do not have a Adobe Acrobat product installed.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

I have Creative Suite 6 Design & Web Premium installed on my HP Windows 7 laptop. All of a sudden Acrobat Pro will not open and I cannot reinstall. Get errors 2203, & Error-Install MSI payload failed with error 1603. Help.

I have not been able to reinstall Acrobat Pro on my laptop. I have Suite 6 Design & Web Premium on my HP laptop. I have Windows 7 operating system. All of a sudden Acrobat Pro will not open so I uninstalled and tried to reinstall the program.
The error messages I get are:
ERROR: Error 2203.Database: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error -2147287035.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2203.atabase: C:\Windows\Installer\12102c.ipi. Cannot open database file. System error - 2147287035.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
Help PLEASE!

Hi Patricia ,
For error 2203 ,please refer to the following link.
https://helpx.adobe.com/creative-suite/kb/error-2203-install-creative-suite.html
For error 1603 ,refer to this link.
https://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html
Let us know if this solves the issue .If required ,we"ll surely assist you further.
Regards
Sukrit Dhingra

Error: installing Java Add-in for Central instance

Dear experts,
i've installed the SCS and the Java Add-in for DB successful. While trying to install the java add-in for the central instance i get the following error:
An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options > Java Add-In for ABAP > MaxDB > Central System > Central Instance Java Add-In ( Last error reported by the step :TypeError: instance has no properties (in script NW_Addin_CI|ind|ind|ind|ind, line 109346: ???)
Thanks in advance.
Daniel

Hi,
Check below thread:
Error installing SAP NetWeaver 2004s Java Trial Version (SP9)
Thanks
Sunny

Error while trying to install SAP CE 7.1 EHP 1 on Windows 7

I am trying to install SAP CE 7.1 EHP 1 on Windows 7. I am getting below error while trying to install. can you please help to fix this problem?
Running msiexec failed with return code 1603: undefined
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
Thanks,
Sridhar.

I donu2019t think so it is windows 7 or 64/32 bit hardware/software issue. I have faced u201Cmsiexec failed with return code 1603u201D error many times during SAP installation and solved this issue with below mentioned procedure.
Solution:
Just change the location of temp directory to empty folder in user environment variable without cancel installation in current user session. After that, click on yes button to continue the installation. If installation will ended after click on yes button, restart the installation with continue old installation option.
Regards.
Yasir

Error installing DS10g 10.1.2.0.2 on windows 7 (64bit)

Similar Messages

Maybe you are looking for