Error Installing DVDSP 3 Upgrade

New to discussions. First post.
Recently acquired DVD Studio Pro v1 + v3 upgrade intending to install under OS X 10.3.9 on mirrored RAID drives.
Tried to install v3 upgrade without first installing v1, hoping it would merely prompt for valid license. Installer accepted v3 serial, then prompted for original, but it won't accept the v1 serial. Several attempts proved not a typo.
Installed v1 by booting into separate volume under 10.2.8/9.2.2 within Applications OS9 folder, then launched and serialized it. All seems find with v1 install, but experienced same problem after subsequently trying to install v3 under 10.3.9 again. Can't get past prompt to supply "original" serial number.
I was led to believe the v1 serial number would be all I would need. My intention is to clear the old 10.2.8/9.2.2 volume for use as a video disc, so is there anyway I can get this installed under 10.3.9? Or alternatively how can I get this installed by keeping 10.2.8/9.2.2 volume intact.
Disc capacity not issue!

PROBLEM SOLVED!
While it wasn't a typo, it was a misread of the S/N that tripped me up. I consistently put a numerical 1 where an uppercase I was meant. Enter it correctly and voila, magic.
While your analysis may not have proven entirely accurate, David, it nevertheless correctly pinpointed a problem with the S/N (or rather, my eyes, he says sheepishly admitting his eyes are not what they used to be). I very much thank you for that.
Kudos also to Apple Tech Support who willingly verified the S/N despite an expired AppleCare and having purchased from the used market. They quickly noted the alphanumeric switch and now I'm able to start designing my first DVD. I am looking forward to the experience.
Thanks, Again!

Similar Messages

  • Installing DVDSP 4 Upgrade

    I am upgrading from v.1 and am having problems with the install. It seems to hang on the template. I have everyhing else installed ok, I think. I have opened DVDSP4 and it seemed to be ok. I would like to have the transitions and the templates. Any advise from anyone?
    This is being installed on a G4 dual 896 with 1.7 gig ram running 10.4.3
    Thanks,
    tony

    It helps to search sometimes cause this has come-up before:
    http://discussions.apple.com/click.jspa?searchID=-1&messageID=2101463
    -Jake

  • Unable to install Dreamweaver CS6 Upgrade ! from Hard Drive DUMP - Error : Adobe Genuine Software Verification Failure

    Hello,
    I am Unable to install Dreamweaver CS6 Upgrade  from CS4  from Hard Drive DUMP -
    Error :Installation Failed
    Adobe Genuine Software Verification Failure
    The product you are trying to install is not an adobe Genuine Software and appears to be counterfeit.
    Can any one help me with this issue. I earlier installed it from DVD but, i am unable to find DVD. I have a copy of full DVD Dump in network.
    Can someone help me fix the issue.
    Note: I have installed Dreamweaver CS4 with serial number.and am trying to install upgrade over cs4.
    Please help.
    Thank you,
    Sin

    It was because i was installing directly from network dump.
    I've managed to install and register software.
    Thanks and my problem is resolved.

  • Upgraded to Yosemite and now my CS5.1 won't start. Error install Java SE 6 runtime.  How do I fix it?

    upgraded to Yosemite and now my CS5.1 won't start. Error install Java SE 6 runtime.  How do I fix it?

    Install the version of Java they want from here: Java for OS X 2014-001
    See if CS 5.1 launches.
    If not reinstall CS5.1 and any updates.
    Gene

  • Unable to install photoshop cs4 upgrade. getting error message

    unable to install photoshop cs4 upgrade. getting error message

    but the error message says that Apple Power PC apps no longer supported.
    You still need to contact the manufacturer.  You need to determine from them if they have drivers that support the OS that is currently installed on your comp or read the following KB Articles: 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download
    http://support.apple.com/kb/PH11070 OS X Mountain Lion: Troubleshoot a network printer 
    http://support.apple.com/kb/PH11143 OS X Mountain Lion: Reset the printing system 
    A scanner driver you may wish to consider:  VueScan Scanner Software 

  • I get an Error 1935 when I install lightroom 5 upgrade on my PC running Windows 8

    I get an Error 1935 when I install lightroom 5 upgrade on my PC running Windows 8

    Hi standicker ,
    Please follow the steps mentioned in the kb: http://helpx.adobe.com/creative-suite/kb/error-1935-assembly-component-microsoft.html and let me know whether it worked.
    Regards,
    Romit Sinha

  • After upgrading to 27, firefox will not start. Saw an error message during the upgrade process.

    After upgrading to 27, firefox will not start. Saw an error message during the upgrade process but cannot remember.
    Tried to run firefox.exe -P but receive error message:
    XML Parsing error: undefined entity
    Location: chrome://mozapps/content/profile/profileSelection.xul
    Line number 18, Column 1:
    <dialog
    ^
    Running on Windows XP SP3. No problem whatsoever before upgrading to 27. Sending this from Chrome as I cannot open Firefox at all.

    Thanks jschaer2000: after starting it once in safe mode, I closed Mozilla and tried several restarts in normal mode. So far, all worked:-)
    Thank you very much again.
    Still the automatic update process bothers me: it took me several days to discover the reason to the malfunction, since when I removed the problematic version from Add and Remove Programs, I didn't pay attention at first that it was another version, not v26 which I installed from my folder.
    In addition, I like to save the installation files before I run new programs and if I didn't have v26 exe file, I couldn't have operated Mozilla at all. Not that it was fun to remove and install again each time v27 didn't react, but it was better than nothing, I still prefer Mozilla over its competition.

  • Error message while while upgrading FIM RTM to FIM Service pack 1

    Hi All,
    I am getting the below error message while while upgrading FIM RTM to FIM Service pack 1, I had followed the same procedure in one of my test lab and it upgraded successfully. Kindly advice.
    Regards,
    Anirban Singha

    HI Dominik,
    Thanks for reply,
    Event Error,
    Product: Forefront Identity Manager Synchronization Service - Update 'FIM Synchronization Service Hotfix KB 2814853' could not be installed. Error code 1603. Additional information is available in the log file E:\FIMR2-SP1\logfile.txt.
    MSI Logs:
    CustomAction DetectServiceAccount returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
    Action ended 15:06:14: DetectServiceAccount. Return value 3.
    MSI (c) (C4:10) [15:06:14:359]: Doing action: SetupCompleteError
    Action 15:06:14: SetupCompleteError.
    Action start 15:06:14: SetupCompleteError.
    MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
    MSI (c) (C4:20) [15:06:14:365]: Transforming table Binary.
    MSI (c) (C4:20) [15:06:14:365]: Note: 1: 2262 2: Binary 3: -2147287038
    Action 15:06:14: SetupCompleteError. Dialog created
    MSI (c) (C4:A0) [15:06:14:376]: Note: 1: 2731 2: 0
    Action ended 15:06:19: SetupCompleteError. Return value 2.
    Action ended 15:06:19: INSTALL. Return value 3.
    MSI (c) (C4:10) [15:06:19:627]: Destroying RemoteAPI object.
    MSI (c) (C4:E0) [15:06:19:628]: Custom Action Manager thread ending.
    Property(C): DiskPrompt = [1]
    Property(C): UpgradeCode = {545334D7-13CD-4BAB-8DA1-2775FA8CF7C2}
    Property(C): PID = 04783-270-0001260-04309
    Property(C): MIIS_PATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
    Property(C): INSTALLDIR = C:\Program Files\Microsoft Forefront Identity Manager\2010\
    Property(C): WWF35 = 3.5.30729.5420
    Property(C): DOTNETINSTALLROOT = C:\Windows\Microsoft.NET\Framework64\
    Property(C): SQLDB = FIMSynchronizationService
    Property(C): EVENTSOURCE = FIMSynchronizationService
    Property(C): EVENTPRODUCTNAME = FIM Synchronization Service
    Property(C): SYNCINSTALLPATH = C:\Program Files\Microsoft Forefront Identity Manager\2010\Synchronization Service\
    Property(C): GROUPADMINS = MPHASIS\FIMSyncAdmins
    Property(C): GROUPOPERATORS = MPHASIS\FIMSyncOperators
    Property(C): GROUPACCOUNTJOINERS = MPHASIS\FIMSyncJoiners
    Property(C): GROUPBROWSE = MPHASIS\FIMSyncBrowse
    Property(C): GROUPPASSWORDSET = MPHASIS\FIMSyncPasswordSet
    Property(C): SQLServerStore = LocalMachine

  • ITunes restore error message after iphone upgrade to OS5

    Since installing iphone OS5 I've been getting a message when connecting to itunes that my restore was interrupted and would I like to continue to restore from my last backup. I've tried restoring several times and I keep getting the same error message at the end of the restore. I also had trouble installing the OS5 upgrade because of an error -34 (something related to the fact that my music was compressed). How do I restore my phone so that this error does not keep appearing? It seems no data was lost.

    Do you still have access to the old system? If so drag the iPHtoo library on the new system to the desktop and Connect the two Macs together (network, firewire target mode, etc)  or use an external hard drive formatted Mac OS extended (journaled) and drag the iPhoto library intact as a single entity from the old Mac to the pictures folder of the new Mac - launch iPhoto on the new mac and it will open the library and convert it as needed and you will be ready move forward.
    LN

  • Error message after iTunes upgrade

    The error message reads:
    "The attempt to burn the disc failed. The device failed to calibrate the laser power level for this media."
    What does this mean?
    I am using the same discs as I always have. I just installed the latest upgrade. version 6.0.5
    imac   Mac OS X (10.4.4)  

    Well, I thought that the iTunes upgrade had something to do with my inability to burn CDs. I can't say for sure that was the case but I do know that what fixed my problem (if you can believe this) was installing the QuickTime update. I'm thinking that the iTunes update corrupted something, but installing the QT update corrected the problem. Now I can burn with no problems whatsoever. You may want to give it a try.

  • There must be a real solution to "Windows found driver software for your device but encountered an error installing"

    "Windows found driver software for your device but encountered an error installing"
    I've spent hours researching this error - Seems like many people have the same issue although there is no difinitive fix or known cause.
    I'm hoping someone here has an answer.
    Windows 7 Home Premium x64 OEM (HP)
    This is not an upgraded Vista system.
    It's not a specific driver related issue as it's the same response/effect be it graphics/chip set/usb/printer drivers.
    Please dont suggest to flatten and re-install or run a repair install - It's not an option, I only have remote access to the unit
    as it's currently in field use.
    This is a machine specific issue - identical machine purchased at the same time and configured the same has no issue.
    So the story.
    User has been fine for weeks - no hardware of software changes except Windows Updates.
    A Camera/USB connection that was working no longer does.
    Tried in all USB ports
    Plug in - windows announces found new hardware, tries to install drivers then fails
    with "Windows found software for your device but encountered an error installing ...."
    Device manager finds and identifies device although it is in the 'Unknown Device" category.
    Manually updating drivers via search/internet or point directly at a driver has exactly the same effect.
    Thinking this was just the camera drivers - I researched and downloaded new drivers from camera manufacturers sites
    Fuji and Canon.
    Same effect.
    Deleted/uninstalled drivers completely, deleted/uninstalled all USB root hub and USB devices (hidden and visible)
    SFC /Scannow finds no error
    Cold boot finds USB and chipset(?) devices on boot attempts to reinstall then we get
     "Windows found driver software for your device but encountered an error installing"
    So now I have no usb devices at all - memory stick/card reader/printer...... nada.
    in fact if I try to update any device driver I get the same message generated.
    Restore point does not help either. 
    After much trawling I found reference to a permisions issue and stale driver cache data.
    (This is using an administrator account - not user with admin permissions?)
    I'm willing to try anything at this time
    I deleted the infcache.1 and other .dat files under c:\windows\system32\driverstore
    Copied the usb  .inf and .pnf from the appropriate FileRepository directory into c:\windows\inf
    Uninstalled all the usb/unkown devices from device manager again.
    Rebooted
    Takes a little longer to boot as I take it it's rebuilding the driver cache then
    a very short hurrah!!!
    I can now use usb memory card and pen drives - no issue
    Plug in a camera or printer...
    "Windows found driver software for your device but encountered an error installing"
    Several attempt at this trying different driver versions.
    It should not be vendor specific, the other field machine that works is using Microsoft drivers for these devices.
    I even copied the drivers from one machine to the other - repeated everything above...
    "Windows found driver software for your device but encountered an error installing"
    And then the nail in my sanity
    Try windows update....
    Reboot
    "Windows found driver software for your device but encountered an error installing"
    but this time its different.
    The device it thinks it cannot install is the generic MTP-PTP drivers  (Photo Transfer Protocol -so am I getting somewhere)
    so it still finds but cannot install.
    The cameras are always found but appear as 'unknown devices' and cannot be accessed
    Uninstall all USB/unkown again - reboot..
    Same message and this time I've lost all the USB again.
    Restore point to before Win Update gets me USB back again although I still have no cameras  - so theres an update issue as well.
    This has to be tied down to a file access/ registry problem although I'm loath to go cutting about without some guidance.
    I'm no great believer in 'registry cleaners' unless anyone can point to a definitive/no ad's/sales version that really works.
    As I said above, flattening/rebuild at this time is not an option - the user is not best pleased and I'm completley stumped.
    If anyone has experienced(manu of you have) and fixed(still to find one) this issue please let me know how as soon as possible.
    Chris 

    I know I am replying to an old thread - but I have the answer and resolved this error, and since this message comes up first in search results, and part of my answer came from this thread, I wanted to help someone else as this took an extra
    12 hours and a lot of technical insight to resolve. See below for detailed explanation that others ask for above.
    My original issue was that iTunes didnt reinstall. generating this error that said I am trying to access an unavailable network resource and to browse to find itunes64setup (again). This may partly have been due to me deleting old install version folders.
    Research led me to completely uninstall apple products and reinstall per their instruction and fixed the issue with iTunes. see
    Remove and reinstall iTunes and related software components for Windows Vista, Windows 7, or Windows 8 - Apple Support
    The SAME error I had while updating itunes recurred while uninstalling it from my Windows 7 SP1 system...so I went to microsoft Fixit and attempted to correct and it properly uninstalled iTunes for me, which allowed the reinstall.
    What didnt work was my USB web root/ root hub, which partly involved my older system and USB 1.0, and the delete/reinstall existing drivers with the c:\windows\winsxs folder as source of drivers (thank you Magon Liu!!!) which I had to figure out what/why
    and how.
    Then I had an intel chipset issue...my new Iphone wasn't recognizing in plug and play, and there was an error with installing the device drivers for my new iphone 6. Manual applications didn't work, even though a generic device showed in control panel -
    device manager with a yellow !
    Per above blog answer - I tried to remove and reinstall my USB controller or update the drivers (I have an Alienware M15 laptop - a few years old.) I discovered that the USB host controller - an Intel(R) 5 Series / 3400 Series Chipset family USB Enhanced
    Host controller - (port) was not covered by current Intel chipset programs which are Series 6 and later, but did have an update (8/20/2009 v9.1.1.1020)  that supported USB 2.0 (and therefore 3.0 backwards compatibility which as an issue with my new iPhone
    and some USB thumb drives.) To find this I had to look at the Support - Downloads and Drivers - browse for drivers and somewhere found an option to look for older no longer supported drivers. I found infinst_autol.exe for my case.
    Once downloaded I tried to install and failed. Found the log in C:\Intel\Logs and contains:
    [InstallDev]
              [Device]
                Driver = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
                INF = C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf
                Installed INF =
                Previous driver package =
    !           Warning 0xE0000235: DriverPackageGetPath failed.
                Difx = 64 bit
    Execute command: C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\x64\Difx64.exe -DriverInf "C:\Users\DAVIDS~1\AppData\Local\Temp\IPMx7\WIN7\ibexusb.inf" -Flags 20 -KeyPath "Software\Intel\Difx64"
                Using RegDeleteKeyEx
    !!!         ERROR 0xE0000246: DriverPackageInstall generated an unexpected error
     HERE'S THE ADDED EXPLANATION TO BRIAN'S POST THAT EXPLAINS THE SECURITY ISSUE:
    This turned out to be an error for two reasons. First, after manually running the command in an "run as administrator" window (same error result), thinking it related to my anti-virus (turned that off/disabled firewall and A/V), and from this thread
    granting my user administrative rights to files in an install folder and trying to reinstall inf files and drivers from C:\Windows\winsxs vs my copied infinst_autol.exe expansion (as found from log in C:\Users\David Samuels\AppData\Local\Temp\IPMx7\WIN7 folder).....that
    there was an easier solution as the reason this error actually happens is a permissions problem.
    To access the proper windows system folders - you have to be the TrustedInstaller service - not just in the administrator group...or you have to be the actual "Administrator" account. To become actual administrator on
    your own laptop, Open a command window "run CMD.exe as administrator", then execute command
    > net user administrator /active:yes
    This creates a local PC Administrator account with no password. Coincidentally it has proper permissions to windows directories for installing drivers. Log in as this user, go to device manager and update the USB hub and any other drivers. if updating the
    USB root - it doesn't replace it right away as the system cant disable the currently resident in memory "running" driver  - you have to update, then restart the system, log in as administrator and repeat at the next lower layer that has issues.
    Once completed - log in as yourself again and disable the administrator account in a command window with > net user administrator /active:no
    This in my case enabled all my USB 2.0 and 3.0 devices on my originally only USB 1.0 laptop and everything else works properly again - I hope this helps many of you to resolve your own issues that were difficult to find and resolve and that got as far as
    this thread. Good luck!
     Regards,
     Dave Samuels

  • Error installing iTunes 10 on Windows 7 64 Bit

    I upgraded to Windows 7 from XP since I changed laptop. I did tried to install iTunes on this new machine (win 7 64 bit Corei7 processor and 4G RAM) but during the installation when the status screen states "Publising Product Information", I'm getting the following error message:
    "An error occurred during the installation of assembly 'Microsoft.VC80.CRT,version="8.0.50727.4053",type="win32",publicKeyToken='1fc8b 3b9a1e18e3b",processorarchitecture="x86". Please refer to Help and Support for more information. HRESULT:0x800736FD."
    Following this message, the installer reverses the installation process and after a 10-15 minute wait, a screen comes up that says the Itunes installation was complete. Obviously it wasn't but that is what the message says. When you close out of that message, Itunes tries to start and this message pops up:
    "Apple Application Support was not found.
    Apple Application Support is required to run iTunes. Please uninstall itunes, then install iTunes again.
    Error 2"
    Any help will be very much appreciated

    HRESULT:0x800736FD
    It's rarer to see these on Windows 7 than it is on Vista. Somtimes they're a bit easier to deal with on 7, too.
    First, head to Windows Update and see if you can update the PC. If you can, and you collect updates without any errors, try another iTunes install.
    If you get errors installing Windows Updates, double click on the failed updates in your Update history to bring up a small window containing alphanumeric codes for the erros. Are they also 800736FDs, or are you getting other error codes?

  • Error occurred during automatic upgrade of MDL file

    The MDL file is exported from 10.2, we were trying to imported it into 11.2 using OMBIMPORT, got following error message.
    MDL1323: Error occurred during automatic upgrade of MDL file </opt/etl/etl.mdl>.
    Detailed Error Message:
    Error: MDL1122: Import data file auto_upgrade.src not found
    Any suggestion is greatly appreciated.

    I had the same problem
    MDL1323: Error occurred during automatic upgrade of MDL file <>.
    Detailed Error Message:
    Error: MDL1122: Import data file auto_upgrade.src not found
    Reason:
    I exported mdl from 11.2.0.2 version to 11.2.0.1
    Solution:
    - Upgrade version DWH from 11.2.0.1 to 11.2.0.2
    - Install separate client on the server DWH and run import script from client directory

  • Experiencing Lots of Errors Installing CS 5.5 on Windows 8 / 64 Bit PC

    Details below. Any help is appreciated. CS 5 installed with no problems. I am attempting to install the upgrade.
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 6 error(s), 106 warning(s)
    WARNING: DS013: Payload {4355EE3F-2FDD-4EF4-83EA-2465FBF95B16} GermanSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {01CABE2B-CE62-4924-8F8F-D9EF7491B23B} GermanSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the session payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {234A555C-70F5-48FB-A7E2-32410EB5AF64} ItalianSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {277DDEAC-D86F-404B-BC5F-AC5B3E073671} ItalianSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {D5CC77BE-BC5B-424E-8E45-DF60AFF7BE9C} Pixel Bender Toolkit 2.0.0.0 is already installed and the session payload {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {66173EC7-974E-4652-9468-4A93D2481BF0} CSXS Story Extension 1.0.0.0 is already installed and the session payload {3450d4c5-a82b-4428-a512-842ee1555a14} CSXS Story Extension 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {36D02DA9-35F2-4686-A2FE-EF3014D2E226} SpanishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {3A95850D-2A0E-48FC-95C0-3F27B95DA7EC} SpanishSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {40F95A03-885A-45fb-9A14-486BEFEDDF34} Adobe Flash Player 10 Plugin 10.1.52.14 is already installed and the session payload {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {78A53622-CDBA-49D1-A3D0-D563FB398D0C} AdobeColorCommonSetRGB 3.0.0.0 is already installed and the session payload {45063C56-A2A2-4FD1-A56A-A964723EEE1E} AdobeColorCommonSetRGB 3.1.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {39CB2E53-5326-4939-8B5A-0402C6EFBFE3} AdobeColorCommonSetCMYK 3.0.0.0 is already installed and the session payload {54D89F03-8EED-4FF9-BCDF-3B2E11D448A6} AdobeColorCommonSetCMYK 3.1.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {7E5AA19B-0B85-4f44-BA26-728851489200} Adobe Flash Player 10 ActiveX 10.1.52.14 is already installed and the session payload {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {3BF96AC2-0CA1-11DF-B07B-459956D89593} AdobeHelp 1.0.0.0 is already installed and the session payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {0EDAD58E-71F3-4D0E-9D32-A205533FC0E9} KoreanSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {85A65551-7D55-4AB5-83EB-2B352A0DDD08} KoreanSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {E7F2C606-8529-4028-B26E-8407DB43DD45} FrenchSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {A92DAC1E-9F7C-46A3-BD06-8E629A5E1D07} FrenchSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {925ED7E4-E1B6-4544-8141-1C98A18D2E2E} AdobeOutputModule 3.0.0.0 is already installed and the session payload {AC003BC0-704F-4F02-A72E-AC8B7044DE24} AdobeOutputModule 3.1.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {F46A4C18-2EAD-49F0-A244-994226F93B39} JapaneseSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {C25C56B5-DF4B-4D25-B25F-9E7953648016} JapaneseSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {CD693E49-C5EF-4FA6-9037-9B636931C02B} AmericanEnglishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {CCB778B5-25B8-4E57-9F20-72B11B443EF9} AmericanEnglishSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    WARNING: DS013: Payload {A1E0C87F-BFE5-490A-898E-05BD4DD2BADF} InternationalEnglishSpeechAnalysisModels 1.0.0.0 is already installed and the session payload {F3AEA2B8-DC79-470F-9D16-A4E9CF2F8810} InternationalEnglishSpeechAnalysisModels 2.5.0.0 has no upgrade/conflict relationship with it.
    ERROR: DS013: Verifying payload integrity : Failed with code 1
    WARNING: DW066: OS requirements not met for {0D96CFE6-376D-44B8-808A-16F3BEB73263}
    WARNING: DW066: OS requirements not met for {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6}
    WARNING: DW066: OS requirements not met for {43A1C48E-3E50-410e-951C-E17A66BBF824}
    WARNING: DW066: OS requirements not met for {3450d4c5-a82b-4428-a512-842ee1555a14}
    WARNING: DW066: OS requirements not met for {11C0657F-2BD4-4CBC-87F3-9455DC91886E}
    WARNING: DW066: OS requirements not met for {8F366029-8F3C-4400-BB65-7BFD1A58F200}
    WARNING: DW066: OS requirements not met for {B55FDCCB-8A45-4943-8D90-585C3490A032}
    WARNING: DW066: OS requirements not met for {4603E0C5-6880-4A4F-BCF8-DF1F6AE0E317}
    WARNING: DW066: OS requirements not met for {EB186BF2-0A84-40A2-B794-0326D3DF9973}
    WARNING: DW066: OS requirements not met for {0669F23C-1B69-41B4-A3ED-4F54A5986D66}
    WARNING: DW066: OS requirements not met for {6BC81374-1E33-4495-93E2-DD2B10D358EE}
    WARNING: DW066: OS requirements not met for {067E43CD-3E9C-44BA-89FA-EDE7461BC22B}
    WARNING: DW066: OS requirements not met for {C1302004-7A3C-467A-80AC-4D0C9F6982C1}
    WARNING: DW066: OS requirements not met for {7CAD45EF-24AD-4281-9236-7F8DDB0B9538}
    WARNING: DW066: OS requirements not met for {61D7BE95-B5C3-4257-A773-64596D72E848}
    WARNING: DW066: OS requirements not met for {C2F8BD34-1692-40F9-BA1B-1CFB2B5FED3A}
    WARNING: DW066: OS requirements not met for {00AEBAF2-D950-467B-BD24-449BCA2A4424}
    WARNING: DW066: OS requirements not met for {FF5837B9-6F4D-1014-B2FA-C016F4A584FA}
    WARNING: DW066: OS requirements not met for {F37EA9EC-638F-4E61-BED4-BDB10461D73B}
    WARNING: DW066: OS requirements not met for {F194231A-13B9-45B9-9699-1B9AC6500263}
    WARNING: DW066: OS requirements not met for {7745F18B-FD8A-4011-BE16-588900C503D0}
    WARNING: DW066: OS requirements not met for {32C78855-194D-4E66-9EB5-D6DC1C418D79}
    WARNING: DW066: OS requirements not met for {89823DB1-05CA-1016-BA4A-BE6A29E42461}
    WARNING: DW066: OS requirements not met for {7CF76BDA-73EA-4C46-A59D-FC3142D83E65}
    WARNING: DW066: OS requirements not met for {B0D32525-8AFA-43C4-B84D-AB2A844D5EAD}
    WARNING: DW066: OS requirements not met for {0A186736-9C62-48B2-B1DF-8A9C5CF7C997}
    WARNING: DW066: OS requirements not met for {4C08199E-0D93-4227-8325-F024E71CA7A1}
    WARNING: DW066: OS requirements not met for {BD3F3C6B-5F98-109B-A0CA-B0FAE4A7D983}
    WARNING: DW066: OS requirements not met for {301D39AF-43B1-445B-88CF-D78584200322}
    WARNING: DW066: OS requirements not met for {CC35904A-0197-4F06-BD70-9CE3DB24DBFD}
    WARNING: DW066: OS requirements not met for {4B51E596-6BB0-4244-9AB9-344AD5FA6726}
    WARNING: DW066: OS requirements not met for {CCB778B5-25B8-4E57-9F20-72B11B443EF9}
    WARNING: DW066: OS requirements not met for {07C64F28-6F4E-1014-A82C-D40EE8D79912}
    WARNING: DW066: OS requirements not met for {260BF844-6F4D-1014-A611-DFCB82217C38}
    WARNING: DW066: OS requirements not met for {47CE893F-A0FF-4094-AA16-5209AEA7C7E0}
    WARNING: DW066: OS requirements not met for {A92DAC1E-9F7C-46A3-BD06-8E629A5E1D07}
    WARNING: DW066: OS requirements not met for {01CABE2B-CE62-4924-8F8F-D9EF7491B23B}
    WARNING: DW066: OS requirements not met for {208DE3D5-541C-41B0-8595-7A608A6E4306}
    WARNING: DW066: OS requirements not met for {F3AEA2B8-DC79-470F-9D16-A4E9CF2F8810}
    WARNING: DW066: OS requirements not met for {277DDEAC-D86F-404B-BC5F-AC5B3E073671}
    WARNING: DW066: OS requirements not met for {C25C56B5-DF4B-4D25-B25F-9E7953648016}
    WARNING: DW066: OS requirements not met for {85A65551-7D55-4AB5-83EB-2B352A0DDD08}
    WARNING: DW066: OS requirements not met for {4A4F91EA-5951-4C5C-B911-027D802817EB}
    WARNING: DW066: OS requirements not met for {3A95850D-2A0E-48FC-95C0-3F27B95DA7EC}
    WARNING: DW066: OS requirements not met for {4883A813-2805-4FA8-A91C-073BA7B2667A}
    WARNING: DW066: OS requirements not met for {9F16123E-05FC-1016-91BC-C090234C0EE3}
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    WARNING: DW066: OS requirements not met for {606A0AC5-5F90-4379-81AE-11B44707E094}
    WARNING: DW066: OS requirements not met for {3EE734CB-F7AD-4691-9712-066E9FEC3E62}
    WARNING: DW066: OS requirements not met for {B7091600-995D-44EC-9B67-0E2025FDA600}
    WARNING: DW066: OS requirements not met for {D5B1535A-FDFC-4B40-B2E2-21DA83D9CB57}
    WARNING: DW066: OS requirements not met for {AD60EB24-4CEE-4CA0-A6AA-526EAF41F2DB}
    WARNING: DW066: OS requirements not met for {650C9D09-D5BD-4532-8BEE-01DBC1DF5537}
    WARNING: DW066: OS requirements not met for {D8D2B468-8342-411A-8760-BCC362C3408F}
    WARNING: DW066: OS requirements not met for {5D2A85AB-7391-4EAC-AA61-D5D9C09E4F17}
    WARNING: DW066: OS requirements not met for {3D51982E-45C6-4B4B-9362-B356E1610821}
    WARNING: DW066: OS requirements not met for {0215A652-E081-4B09-9333-DC85AAB67FFA}
    WARNING: DW066: OS requirements not met for {35ED8892-98E5-488A-A23C-6DB842A46EA5}
    WARNING: DW066: OS requirements not met for {DD309051-FACF-4A5E-87F1-C57154BB3DE8}
    WARNING: DW066: OS requirements not met for {B32795C5-827C-4184-9A36-FF23AB3CDA30}
    WARNING: DW066: OS requirements not met for {D8CCCF4C-C227-427C-B4BE-736657D2AB7E}
    WARNING: DW066: OS requirements not met for {8DADF070-FE60-4899-8EF0-4242E7702F7D}
    WARNING: DW066: OS requirements not met for {1C9D6B02-8B92-4E40-8B22-37D8C95430F0}
    WARNING: DW066: OS requirements not met for {273F6D81-E280-4B31-90E7-8B337DB641CF}
    WARNING: DW066: OS requirements not met for {BF093B6B-F94F-4D77-99C9-4C0F6B2F44B6}
    WARNING: DW066: OS requirements not met for {23767F5D-A80C-4264-B8EA-ED4085FC332A}
    WARNING: DW066: OS requirements not met for {DDBDE7B0-6FC4-40B1-B673-66EEE8CB60CF}
    WARNING: DW066: OS requirements not met for {C0329E33-DEB4-48D9-B7B6-19493A6F062E}
    WARNING: DW066: OS requirements not met for {C61B093E-259E-45D8-B9B6-24630A700398}
    WARNING: DW066: OS requirements not met for {08EF22BC-43B2-4B4E-BA12-52B18F418F38}
    WARNING: DW066: OS requirements not met for {EDE888ED-3BD7-4D8C-AB35-7E4C661A94D9}
    WARNING: DW066: OS requirements not met for {10355145-8A4C-47F3-994B-B9B81B4DABF5}
    WARNING: DW066: OS requirements not met for {F9F276DA-9EC6-492C-AF58-F27C5EC19D66}
    WARNING: DW066: OS requirements not met for {D97AF04B-B70A-4862-BC25-31E6D9C4A529}
    WARNING: DW066: OS requirements not met for {E348E466-429A-4FB0-AFCF-8306C16BBFF1}
    WARNING: DW066: OS requirements not met for {2EA9B52E-8613-41A0-9EEF-FF54AD4CC810}
    WARNING: DW066: OS requirements not met for {970C9F3A-39C5-480B-BE51-7C70AB9F84DB}
    WARNING: DW066: OS requirements not met for {857CC5F0-040E-1016-A173-D55ADD80C260}
    WARNING: DW066: OS requirements not met for {50509A36-0291-1016-9CCF-FC05E9E55550}
    WARNING: DW066: OS requirements not met for {B98CCEE8-0217-1016-B5BF-F06B878DAC9A}
    WARNING: DW066: OS requirements not met for {EFB5A1C3-ECCA-4D8A-B598-81D21DE25C34}
    WARNING: DW066: OS requirements not met for {FE35B66A-C8F1-4D62-B823-C2EE2C7DA702}
    ----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
    WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging    0X1.BE848FP-1013rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9d a68fce32_32_f80493091e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Master Collection CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
    ----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
    ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\JinxyKat\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\JinxyKat\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
    ----------- Payload: {47CE893F-A0FF-4094-AA16-5209AEA7C7E0} Firefox Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-FFPlugin\OEM(Seq 32)
    ----------- Payload: {208DE3D5-541C-41B0-8595-7A608A6E4306} IE Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-IEPlugin\OEM(Seq 26)
    ----------- Payload: {4A4F91EA-5951-4C5C-B911-027D802817EB} Office Plugin CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-OfficePlugin\OEM(Seq 34)
    ----------- Payload: {DD309051-FACF-4A5E-87F1-C57154BB3DE8} Adobe Contribute CS5.1 6.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeContribute6.1-mul\OEM(Seq 8283)
    ----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
    ----------- Payload: {1C9D6B02-8B92-4E40-8B22-37D8C95430F0} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
    WARNING: DF012: File/Folder does not exist at J:\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_USLanguagePack\OEM(Seq 74)
    ----------- Payload: {D97AF04B-B70A-4862-BC25-31E6D9C4A529} Adobe Flash CS5.5 11.5.0.0 -----------
    ERROR: DR012: Setting Registry Value Failed. Error 5 Access is denied.(Seq 154)
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Adobe Flash Player 10 ActiveX: Install failed

    Hi ,
    The only reason because of which you are facing these error's is that your machine does not meet minimum system requirements available for this product to work .Windows 8 is avaiable for CS6 and above products only .
    If you wish to do further troublshooting for the mentioned issue you can use this link:  : http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    Regards,
    Kartikay Sharma

  • Can't install itunes on mac!! error installing application!

    I can't seem to install itunes. when the software updated my itunes, it was screwed up. the screen was white and u couldn't see the playlist and during the software update it said that there was an error in installing the itunes upgrade or something. soo i've deleted all my files and trried to install it back but it wont allow me i constantly get the "error installing application" message. please help! should i jsut send it back and explain to them what happened. i still have to send it back either way because i get the random shutdowns. Also, i used the mac os install discs and after that i kept getting a message saying something about the not enough memory and stuff like that.
    what should i do?!? thanks!

    i tried doing that but it still won't work. i completely moved it from the computer. there's another itunes.pkg file so i dont know if i should remove that as well.

Maybe you are looking for

  • How to file a request for assistance on your site if you do not speak English? Apple is advertising in all languages​​, but to solve a problem or get a board that does not exist.

    For several months, when i use iTunes or Adobe, my mac osx Snow Leopard, does not close automatically, I doid use the power button. I tried a command on the terminel by : fsck)and yf . I received this message " The volume appaers to be OK. Then I ent

  • How to Customize W_Day_D

    Hi There! We have a requirement to have custom calendar in W_Day_D. The requirement is as follows Year = Calendar year Quarter = Calendar Quarter Month = Calendar Month Week = The week should start from Monday instead of Sunday. The week num should c

  • Ifiles not playing movies

    I have tried to download some .WMV movies to my IPAD. A screen says movie has been saved to Ifiles. I click on the Ifiles link and Ifiles app opens. I double click on the movie filename. The movie control displays then closes. I can't get any saved m

  • Quicktime that works on a PC

    hi, I'm exporting minidv NTSC footage using FILE>EXPORT>QUICKTIME MOVIE The result is a "Final Cut Pro Movie File". This will open using quicktime player on my mac. I want to show the project on a PC though. The PC won't open the Final Cut Pro Movie

  • Audio transfer issues from Keynote to iDVD???

    Hi all; I built my presentation in Keynote. I recorded the slideshow, so that way I can export it with the recorded timing. I turned down the built in microphone in system preferences. However, when I'm "previewing" my keynote through iDVD, I can't h