Error installing email microsoft exchange

hey all,
I tried to register or install or access my work email from my Macbook air which is linked to microsoft exchange if that is right as I'm not sure how you call it.
Anyway, I have my gmail and yahoomail working fine with my Macbook air but problem is with work email. I get the following message-
"The server returned the error: The Exchange Server “postkasse.intervare.dk” doesn’t have the minimum required version installed. To use Mail with Exchange, the server must be running Update Rollup 4 for Exchange Server 2007 Service Pack 1 or later. Contact your server administrator."
How do I find an update or solution to the above error.
Thanks,
Sapple1.

Do what the message says. Otherwise, use Outlook or webmail.

Similar Messages

Cannot install the Microsoft Exchange connectivity analysis tool

I am troubleshooting our new 2013 Exchange server because Outlook client cannot connect but OWA is working fine. The 2 new 2013 Exchange server as DAG were installed to co-exist with Exchange 2007.
I am trying to download and install Microsoft Exchange connectivity analysis tool BUT always got an error "Error attempting to install the Microsoft Exchange connectivity analysis tool" and in the log the error is "URLDownloadToCacheFile
failed with HRESULT '-2146697208'.
I am installing it in Windows 8 64b, Please help as we are troubleshooting the new Exchange without any success so far...If there is an full download link, please provide.
Thanks in advance...

Hi Teyob,
Did you try to use different browser to check if the issue persist?
This issue was occurred on browser. If you IE with this issue, we should check to clear the option "Warn if changing between secure and not secure mode" from your Internet Explorer(IE) Tools--Internet Options--- Advanced--Security.
If the setup URL of the ClickOnce application being installed is redirected from a non-secure to a secure site (or vice-versa), the installation would fail due to the Internet Explorer warning. Therefore, please make sure to remove the redirection completely
and point to the actual setup URL.
If the issue persists, we could perform Windows Update to install updates and then run the Desktop configuration again.
If there are any questions regarding this issue, please be free to let me know.
Best Regard,
Jim
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Jim Xu
TechNet Community Support

MS Outlook 2013 Error message "The microsoft exchange administrator had made a change that requires you to quit and restart outlook"

I am currently running 2 HP Servers, SAN Storage. I have Exchange 2013 installed and MS Outlook 2013 randomly appears with the message
"The Microsoft exchange administrator has made a change that requires you to quit and restart outlook" It is happening very frequently and is appearing every few seconds on a lot of users.

Hi WeeMac22,
If you migrated from Exchange 2010 to Exchange 2013, I found a KB for your reference:
Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
http://support.microsoft.com/kb/2934750/en-us
If not, I suggest using OWA to verify whether this issue remains.
1. If everything works well in OWA, it seems an issue on the Outlook client side.
I suggest run Outlook under safe mode to avoid some AVs and add-ins.
I suggest re-create profile to refresh the caches.
I suggest re-install the Outlook if all methods above not working.
2. If this issue remains in OWA, please verify whether all users on the Exchange 2013 have this isse.
If only one user has this issue, I suggest create a test user to check whether the test user has this issue.
If the test user works well, I suggest try to re-create the specific user account.
Please make a full back up before re-creating.
Thanks
Mavis
Mavis Huang
TechNet Community Support

Error Installing SP3, Microsoft applications...

I recently received a 15" 2.66 macbook pro, it is the newest one. It came pre installed with Leopard and Bootcamp 3.0. Everything went smoothly, I partitioned the drive to NTFS, then I tried installing bootcamp drivers on windows and nothing happens at all. So I just installed the bootcamp drivers from the CD that came with the mac.
I have a license for windows XP SP2, 32 bit.
The problem I am having is when I try to install SP3, I get an error that it cannot copy a file, then I canceled everything. I formatted the disk all over again and same thing. then I tried to install microsoft visual studio 2008 and it failed also which is really a problem. I am Loving this mac, but it is really sad if I cannot use it for web development.
One more thing, from the headphones jack, there is a red light when I boot into Windows...
Any help would be Great!

Do what the message says. Otherwise, use Outlook or webmail.

Email / Microsoft exchange

question. I justed to have a blackberry that i loved. However, it began to have issues with my server at work and would not work properly with my email. Our office discontinued and went to iphones. Now, the question i have is, has blackberry made improvements to work better with Exchange? Will calendar and emails download properly? Is there an equivlent MS Outlook app that can be used like with iphone OS devices? Thank you,

Hi and Welcome to the Community!
It all depends on what is on the server side. Technically, MS Exchange connects to no mobile devices whatsoever, it requires a front end of Oulook Web Access, EAS, or something else. If your server folks have activated EAS for it (which I am told is simple to do), then you can integrate via that to your BB10 device and it will be quite useful indeed.
Good luck!

Enterprise Email/Microsoft Exchange

How do I add my mailbox to the Blackberry Enterprise Server?
I am trying to get my Outlook email on my phone, and when I go to Device Options, under Enterprise Email, it says that Enterprise email services are currently unavailable because my administrator has not added my mailbox to the BlackBerry Enterprise Server.
I do know that it is not because of data for I have unlimited data on a Blackberry plan. Everything else works, but this. I even have my Yahoo account email set up and running fine.
If anyone can help, I would greatly appreciate it!!!

Are you trying to add your work email to your blackberry as an enterprise account? In which case you need to contact your IT people as they will need to add you to the BES server.,

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook - error message

I applied Exchange Server 2013 SP1 and since then some users are getting error message:
'The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook' on their MS Outlook.
Have tried a number of options including repairing the affected user accounts to no avail.
Any idea on how to resolve this will be appreciated.
NB: This error was not there before applying SP1.

kindly need help. i have same message "'The Microsoft Exchange Administrator has made a change that requires
you quit and restart Outlook' on their MS Outlook"
this is comes after applying 2013 sp1

Can't install Microsoft Exchange Web Services Managed API 2.0 - message says it is already installed but it is not.

I tried to install the Microsoft Exchange Web Services Managed API 2.0 but I got a message saying it was already installed and that I should un-install it. However it does not appear in the control panel un-install a program list. I am using
VS2013 on windows 8. What can I do to get it to work?
Mike VE

Hello,
Thank you for your sharing.
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook in Exchange 2010.

Hi,
We have 2 Exchange 2010 servers with multiple roles installed ,also we have setup cas array on the same with help of Kemp load balancer. Both have 1 public folder on each node.
There are few accounts(including mine) those are recently migrated from Exchange 2003 to Exchange 2010 and they are getting intermittantly an error pop "The Microsoft Exchange administrator has made a change that requires you quit and restart
Outlook"
this generally happens when i switch the network for my laptop but not every time 2-3 times in a week.
i already gone through this link but didn't get any solution. Any help is appreciated.
http://blogs.technet.com/b/aljackie/archive/2013/11/14/outlook-rpc-end-point-and-pf-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and-restart-outlook.aspx
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

Hi,
I recommend you check if any Public Folder on one member of a CAS array.
If yes, it will cause the issue.
I had encountered a similar issue.
The Problem exists when an Outlook client connects into a CAS array initial if
it connects to the CAS array member that contains the PF role, then Outlook
Converges all connections and displays both the Public and Private logons as one
single conneciton to Mail.company.com (the CAS array name) When the Clients IP
address changes, and it Re-connects, if it gets connected to a CAS array member
that does not have the PF server, then we get an ECwrong server Response from
Exchange, Outlook in it's reconnect logic Cannot follow the Redirection Result
that contains the correct PF server name, and displays the Error "the Admin has
made a change that requires you restart Outlook"
Finally, move PF to separate server as a workaround.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support
Thanks !
As i started this question saying i have already read these things . If this is the case i am wonder why microsoft didn't release a technet article where it must discussed about CAS array and Public folder confliction.
However, you said
"if it gets connected to a CAS array member
that does not have the PF server, then we get an ECwrong server Response from Exchange, "
I do have PF on both node then why this pop up.. i do understand if only one node has PF and new connection intiated by outlook connecting to other node which doesn't have PF then it will redirect to the node having PF and while doing so there is
the message.
FYI..
I hve two node server having CAS array and DAG configured on it. keep one thing in mind i am using kemp load balancer for CAS array.
I will appreciate all your help if you elaborate in depth.
Amit Rawat | MCITP - Exchange 2007/2010| CCNA |MCSE- 2003| Lync 2010|http://blog.amitrawat.net

Error when upgrading to exchange 2013 SP1

* First, I install Exchange 2013 SP1 on my server, so step 14 of 18 to 100% then alert error:
=======================
Error:
The following error was generated when "$error.Clear();
          $name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
          $dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
          $dismbx = get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1;
          if( $dismbx -ne $null)
          $srvname = $dismbx.ServerName;
          if( $dismbx.Database -ne $null -and $RoleFqdnOrName -like "$srvname.*" )
          Write-ExchangeSetupLog -info "Setup DiscoverySearchMailbox Permission.";
          $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
          if( $mountedMdb -eq $null )
          Write-ExchangeSetupLog -info "Mounting database before stamp DiscoverySearchMailbox Permission...";
          mount-database $dismbx.Database;
          $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
          if( $mountedMdb -ne $null )
          $dmRoleGroupGuid = [Microsoft.Exchange.Data.Directory.Management.RoleGroup]::DiscoveryManagement_InitInfo.WellKnownGuid;
          $dmRoleGroup = Get-RoleGroup -Identity $dmRoleGroupGuid -DomainController $RoleDomainController -ErrorAction:SilentlyContinue;
          if( $dmRoleGroup -ne $null )
            trap [Exception]
              Add-MailboxPermission $dismbx -User $dmRoleGroup.Name -AccessRights FullAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              continue;
            Add-MailboxPermission $dismbx -User $dmRoleGroup.Identity -AccessRights FullAccess -DomainController $RoleDomainController -WarningAction SilentlyContinue;
        " was run: "Failed to mount database "Mailbox Database 0487331505". Error: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing:
Unable to mount database. (hr=0x80004005, ec=-543)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0xFFFFFDE1
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x667F9F
    Lid: 57728   dwParam: 0x668155
    Lid: 46144   dwParam: 0x66851E
    Lid: 34880   dwParam: 0x66851E
    Lid: 34760   StoreEc: 0xFFFFFDE1
    Lid: 41344   Guid: 581e05de-0b68-45e0-af85-c1d96eb3e939
    Lid: 35200   dwParam: 0x548
    Lid: 46144   dwParam: 0x66885A
    Lid: 34880   dwParam: 0x66885A
    Lid: 56264   StoreEc: 0x1388
    Lid: 46280   StoreEc: 0xFFFFFDE1
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: Mailbox Database 0487331505, Server: ex2013.dothanhauto.com]".
========================
* After I run install Exchange 2013 SP1 again, so go to step 5 of 9 then alert error.
* Now, my Exchange 2013 not run. So bad. Please help me fix it! Thank you so much!

* Thank you, Amit Tank, i passed step 4 of 9, but to step 5 of 9 then alert error:
Error:
The following error was generated when "$error.Clear();
          $name = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxUniqueName;
          $dispname = [Microsoft.Exchange.Management.RecipientTasks.EnableMailbox]::DiscoveryMailboxDisplayName;
          $dismbx = get-mailbox -Filter {name -eq $name} -IgnoreDefaultScope -resultSize 1;
          if( $dismbx -ne $null)
          $srvname = $dismbx.ServerName;
          if( $dismbx.Database -ne $null -and $RoleFqdnOrName -like "$srvname.*" )
          Write-ExchangeSetupLog -info "Setup DiscoverySearchMailbox Permission.";
          $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
          if( $mountedMdb -eq $null )
          Write-ExchangeSetupLog -info "Mounting database before stamp DiscoverySearchMailbox Permission...";
          mount-database $dismbx.Database;
          $mountedMdb = get-mailboxdatabase $dismbx.Database -status | where { $_.Mounted -eq $true };
          if( $mountedMdb -ne $null )
          $dmRoleGroupGuid = [Microsoft.Exchange.Data.Directory.Management.RoleGroup]::DiscoveryManagement_InitInfo.WellKnownGuid;
          $dmRoleGroup = Get-RoleGroup -Identity $dmRoleGroupGuid -DomainController $RoleDomainController -ErrorAction:SilentlyContinue;
          if( $dmRoleGroup -ne $null )
            trap [Exception]
              Add-MailboxPermission $dismbx -User $dmRoleGroup.Name -AccessRights FullAccess -DomainController $RoleDomainController -ErrorAction SilentlyContinue;
              continue;
            Add-MailboxPermission $dismbx -User $dmRoleGroup.Identity -AccessRights FullAccess -DomainController $RoleDomainController -WarningAction SilentlyContinue;
        " was run: "Failed to mount database "Mailbox Database 0487331505". Error: An Active Manager operation failed. Error: The database action failed. Error: Operation failed with message: MapiExceptionJetErrorRequiredLogFilesMissing:
Unable to mount database. (hr=0x80004005, ec=-543)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0xFFFFFDE1
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x35AF49
    Lid: 57728   dwParam: 0x35B062
    Lid: 46144   dwParam: 0x35B3EC
    Lid: 34880   dwParam: 0x35B3EC
    Lid: 34760   StoreEc: 0xFFFFFDE1
    Lid: 41344   Guid: 581e05de-0b68-45e0-af85-c1d96eb3e939
    Lid: 35200   dwParam: 0x1BA0
    Lid: 46144   dwParam: 0x35B757
    Lid: 34880   dwParam: 0x35B757
    Lid: 56264   StoreEc: 0x1388
    Lid: 46280   StoreEc: 0xFFFFFDE1
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0xFFFFFDE1 [Database: Mailbox Database 0487331505, Server: ex2013.dothanhauto.com]".
* Please can you help me?! Thank you so much.

MAJOR PROBLEMS WITH IPHONE 3G AND MICROSOFT EXCHANGE!!!! PLEASE HELP!!!!

Ok,
My exchange server at work was synced to my iphone and has worked with no issues. I then exchanged my phone because there were issues with my bluetooth not syncing properly. So with this new phone, it prompts me to enter in my exchange server password every few days. I contacted my IT department as well and microsoft to get this issue resolved because I assume that there were issues with the exchange server. They were both able to see an event viewer and it showed that my iphone was attempting to log in numerous amounts of times, which locks out my account after 3 incorrect log ins. Even when I erased the exchange account from my phone, it still showed that the phone in the event viewer was trying to log in over and over again. I then did a master clear and restore and the process was removed in the event viewer. So then I called my IT department to unlock my account after I cleared everything. I was able to sync everything again with it working properly. Now its a day later and the my exchanger server prompts me to enter in the password AGAIN and my exchange account is locked AGAIN because the event viewer at work is showing the same issues. Is my Iphone not saving the password correctly? What do I do? My IT department even created a dummy account to see if a new account would fix the issues but yet no cigar! HELP!!

The iPhone you returned is still syncing against your server and locking out your account. Someone possibly has access to your mail data. I'd recommend having your Exchange Administrator install the Microsoft Exchange Server ActiveSync Web Administration Tool (http://www.microsoft.com/downloads/details.aspx?FamilyID=E6851D23-D145-4DBF-A2CC -E0B4C6301453&displaylang=en) and attempt to wipe/delete/block that other iPhone.
Message was edited by: ethanm

Error installing iTunes for windows 8 64 bit

I can't install iTunes 64 bit in my new laptop. Installatione give me this error:
Error installing assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKeyToken="win32 ".version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86". ..........
Anyone can help me?
Thank's
Ben

No, I have windows 8 64 bit installed,; however I tried also with 32 bit version, but when I start the installation, a massage appears saying that I'm trying to install a 32 bit version while I need to download and install 64 bit version! However thank's

Need help setting up Comcast email through Exchange

I'm having trouble setting up my comcast email on my iPhone through the Exchange. It looks like everything is setup fine. I've even received some emails on my phone, but then they suddenly disappear and it says I have no mail. Another person in my office is having the exact same problem. Comcast Business sent our office an email that they had upgraded from Microsoft Exchange 2007 to Microsoft Exchange 2010. Any suggestions?

I have Comcast email through an Exchange account on all of my iDevices. I received the email that the service is going to be upgraded to MS Exchange 2010, but I have not received notice that it has officially changed yet.
Have you seen this? I don't think that the steps are any different than what they were for MS Exchange 2007, but take a look.
http://businesshelp.comcast.com/help-and-support/email/connecting-iphone-to-emai l-account/
This is copied from the FAQ website.
http://businesshelp.comcast.com/help-and-support/email/microsoft-exchange-2010-m igration-email-sharepoint#email
5. How do I configure mobile devices to access my Exchange account?
For mobile device configuration information, please see the mobile device setup articles for iPhone, iPad, Android,BlackBerry or Windows Phone. If after the migration to Exchange 2010 you cannot access your email through your mobile device only, you may need to re-configure your mobile-device access.

Spam Protection for Email showing Critical for Exchange Server 2007 after installing Symantec Mail Security for Microsoft Exchange

Hi there,
I have SBS 2008, and I have recently installed Symantec Mail Security for Microsoft Exchange version 7.5 but when I take a look on Windows SBS Console under Security, it shows "Spam Protection for Email Critical Exchange Server 2007" However,
when I open the SMSME it shows running well with no problem..
Any Suggestions???
Thanks

Hi,
Would you please let me confirm whether all functions (which are related to Exchange Server) run as normal? Just
a confirmation, thanks for your understanding.
Please run
SBS BPA and check if find relevant issues. In addition, please refer to GaryD9’s suggestion in following thread and check if can help you.
SBS
2008 & Forefront Protection 2010 for Exchange - SBS Console Error
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Error while installing exchange2007 : Unable to initialize the Microsoft Exchange Information Store service. Failed to find the

Hi,
I am trying fresh install of exchange2007, everything gone well but, finally it thrown a error saying :
Unable to initialize the Microsoft Exchange Information Store service. Failed to find the working directory parameter from the registry - Error 0x80004005.
the installation log says
6/5/2007 3:14:05 PM] [1] Processing component 'Mailbox Service Control (Last)' (Starting mailbox services).
[6/5/2007 3:14:05 PM] [1] Executing 'start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"', handleError = False
[6/5/2007 3:14:05 PM] [2] Launching sub-task '$error.Clear(); start-SetupService -ServiceName MSExchangeIS -MaximumWaitTime "unlimited"'.
[6/5/2007 3:14:05 PM] [2] Beginning processing.
[6/5/2007 3:14:05 PM] [2] The maximum wait for the operation is set to 'unlimited'.
[6/5/2007 3:14:05 PM] [2] Service checkpoint has progressed. Previous checkpoint='0' - Current checkpoint='1'.
[6/5/2007 3:14:05 PM] [2] Will wait '10000' milliseconds for the service 'MSExchangeIS' to reach status 'Running'.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to reach status 'Running' on this server after waiting for '10000' milliseconds.
[6/5/2007 3:14:15 PM] [2] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] [ERROR] Unexpected Error
[6/5/2007 3:14:15 PM] [2] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [2] Ending processing.
[6/5/2007 3:14:15 PM] [1] The following 1 error(s) occurred during task execution:
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] 0. ErrorRecord: Microsoft.Exchange.Configuration.Tasks.ServiceFailedToStartException: Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] [ERROR] Service 'MSExchangeIS' failed to start. Check the event log for possible reasons for the service start failure.
[6/5/2007 3:14:15 PM] [1] Setup is halting task execution because of one or more errors in a critical task.
[6/5/2007 3:14:15 PM] [1] Finished executing component tasks.
[6/5/2007 3:14:15 PM] [1] Ending processing.
[6/5/2007 3:14:18 PM] [0] End of Setup
[6/5/2007 3:14:18 PM] [0] **********************************************
this I am trying on my test system please help me out in resolving the issue
thanks in advance,

Gary,
Open Registry Editor.
In Registry Editor, navigate to the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
Create the following value (REG_SZ): Working Directory and give it a value that points to the new database folder.
Make sure you back up the registry before you do any changes on it.
Raj

Error installing email microsoft exchange

Similar Messages

Maybe you are looking for