Error installing free CS2 with mac

I am trying to install the free version of CS2 on my macbook with OSX 10.7 but keep getting the following message: "You can't open the application HFSTest because PowerPC applications are no longer supported."
Please help me figure out how to get this installed.
Kyle

There is nothing to figure out. It means what it says - CS2 will not work on intel-based Macs and is not free, either. You are wasting your time with an illegal activity.
Mylenium

Similar Messages

Error installing photoshop cs2 for mac

I downloaded photoshop cs2 for mac its official website. The version of my OS is 10.9. When installing photoshop in the end get the following error: "error during installation." They can help with the cause and solution of this error?

you can check compatibility here, http://roaringapps.com/apps:table

Can not install photoshop CS2 on Mac OSX. 10.9.5, It shows "error" no error number, suggest to contact the software supplier, only choice is to quit.

I tried to install Photoshop CS2 on Mac, OSX, 10.9.5.
By the end of the installation, it shows, error, but no error number for reference,
The only choice is "quit".
Please help

That is correct Das_Sad. CS2 will not run on Intel based processors under Mac OS. You will need to find a Mac computer with a PowerPC processor if you wish to run Creative Suite 2.

Problems installing Photoshop CS2 on mac with OSX 10.8.3

I get error message installing Photoshop CS2 on Mac with OSX 10.8.3

they're not compatible: http://roaringapps.com/apps:table/tags/_a/index_tags/_a

How to download adobe illustator free trial with mac os x version 10.6.8 ?

cant i download adobe illustrator free trial with mac os x version 10.6.8??

Dams94 it depends on which version of Illustrator you want to download? You can find the system requirements for Illustrator at System requirements | Illustrator.

Unable to install photoshop CS2 on Mac OSX 10.9.5, failed 3 times

photoshop CS2 on MAC failed installation 3 times

depending on the error, this may resolve the issue:
Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3

Partitioning and Installing Windows 7 with Mac OS X Lion

Hi
after failing seriously with the partitioning after installing Win 7, I hope that I will find some help from the scratch...
I want to install OS X Lion with Win 7.
3 Partitions with Mac are needed and 1 fro Windows.
I got 750Gb on my Mac Book Pro.
Disk should look like this:
100Gb Main Partition (Mac)
200Gb Documents Partition (Mac)
300Gb Stuff and Games (Mac)
150Gb Windows 7 Partition
I tried now to create a 100Gb Partition for Mac and a 150Gb Partition for Windows 7.
After Installing the Mac OS, I was trying to add the 2 other Partitions, but it already telling me that i'm gonna loose my Windows Boot when I change the Partitions. I pressed ok and restarted with the windows 7 DVD for the recovery, which wasn't working due to version incompability -.- (I installed Windows from that DVD)
What steps should I make to get this to work? Some guys says that it not gonna work, but a friend of min has 3 mac partitions and a windows. Sadly he can't remember the way to this setup
Thank you for the help
NESTi

What you are talking about is illegal.
Here are the relevant words from the Snow Leopard EULA
A. Single Use License. Subject to the terms and conditions of this License, unless you have purchased a Family Pack or Upgrade license for the Apple Software, you are granted a limited non-exclusive license to install, use and run one (1) copy of the Apple Software on a single Apple-branded computer at a time. You agree not to install, use or run the Apple Software on any non-Apple-branded computer, or to enable others to do so. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time.
You should also read the terms and conditions of use of these forums, which include the following:-
Keep within the Law
No material may be submitted that is intended to promote or commit an illegal act.
Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
Do not post defamatory material.

Installing GoLive CS2 with Master Collection CS3

I have just taken possession of a beautiful new system with the full Adobe Master Collection already installed by my computer guru man. The new system is very fast etc but I kept with XP 'cos had heard too many horror stories about Vista.
After getting the computer home (I live 2 hours drive away from the guru) I remembered that I forget to ask him to install my old CS2 GoLive with menumachine. I need to have GoLive (and the wonderful Menumachine) to update my GoLive sites. For a while anyway.
He thinks I should be very careful about just installing GoLive with the new CS3 collection because it could cause problems like "some of the shared components may overwrite the new CS3 versions" (whatever that means) He said I should have installed the old version of GoLive before installing CS3 to make this less likely. He said I might be best to uninstall the Master Collection. Start again and install GoLive CS2 first and then the CS3 next. He suggested I ask you.
Has anyone been down this path?
Also I still have GoLive CS2 installed and active on my old PC, will I be allowed to legally install it on the new one too? Or will that count as piracy and cause problems? I also have it on another little computer I have that I use (very rarely) as a kind of laptop.
My new computer has a two hard disks a C-drive and a D-drive - I was wondering if it would help if I installed GoLive CS2 on the D disk - everything is currently on the C disk.

If it were up to me, I would only have GL on two systems per the license
agreement.
Then, I would try installing GL CS2 and if everything works, great. If not,
then uninstall the Adobe stuff and reinstall it as your guru suggested.
~Nick

Trouble installing GoLive CS2 on Mac OS X

I just de-activated the program on my old Vaio which was crashing, and in trying to install to this new Mac (Version 10.5.6) I don't get an icon for installation. It took me an hour on the phone to find out Adobe doesn't support the program anymore and that I should go to Forums. Anyone else have this problem?

You need to look at the installation media and recognize that you have a Windows license if it was installed on your Vaio. That won't work on Mac. Welcome to Mac.
Directly ask Adobe Customer Service for upgrade/crossgrade options to Dreamweaver. (or you can install Windows on your new Mac so that you can install GoLive)

I purchased acrobat standard but have a mac computer. Received response not available for mac only windows. Unable to install on windows with mac

Please direct me as to how to install acrobat standard on mac computer. I had trial basis and now my computer is all fouled up and message received that must be installed on windows computer. How do I handle this dilemma.

If you have Acrobat Standard, it is Windows software. You cannot install Windows software on your Mac.
If it was purchased, get a refund.
If it was bundled, then you just can't use it.

How to install Photoshop CS2 on (Mac OSX) Yosemite 10.10.2

is it possible? please help me

CS2 will not install or run on modern Macs with Intel chips running OS X 10.10 (Yosemite).
CS2 is an old PowerPC application written for older Macs with PowerPC chips (incompatible with Intel chips) running OS X up to 10.3.8.
Modern Macs (all have Intel processors) running OS X with Rosetta (which enables Intel chips to run PowerPC software) will run CS2 but Rosetta was discontinued by Apple in OS X 10.7.

Error Installing Lightroom 4 onto Mac

I'm trying install lightroom 4 onto my Mac operating on Mac OS X 10.6.8. At the end of the installation, an error keeps occuring that is causing the installation to fail. There is no error code or anything. Help?

At the top it says, "There were errors with the installation. You may want to try installing again." I tried again and it came up with the same error. In the middle in huge letters it says, "The Installation failed." And under that, it says, "The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."
That's all I've got.

Error installing clusterware 10gR2 with OCFS2 Storage

When i ran OUI to install clusterware, i get this error when i specified storage location to OCR as '/dev/sda4' -> The location /dev/sda4, entered for the Oracle Cluster Registry (OCR) is not shared across all the nodes in the cluster. Specify a shared raw partition or cluster file system file that is visible by the same name on all nodes of the cluster."
i have been checked the OCFS2 configuration based on technical doc from project site
Thanks in advance

OCFS2 as follow
/dev/sda1 ocfs2 10008448 503392 9505056 6% /app/oracle
/dev/sda2 ocfs2 10008480 1966304 8042176 20% /dbs/genccpr1/ARCHIVE_BACKUP
/dev/sda3 ocfs2 10008480 137632 9870848 2% /dbs/genccpr1/ARCHIVE_LOG
/dev/sda4 ocfs2 3526240 153216 3373024 5% /app/oracle/crs
Shared in both nodes
$ sh comp ssa -n dbgs1c01,dbgs2c01 -s /dev/sda1,/dev/sda2,/dev/sda3,/dev/sda4 <
Verifying shared storage accessibility
Checking shared storage accessibility...
"/dev/sda1" is shared.
"/dev/sda2" is shared.
"/dev/sda3" is shared.
"/dev/sda4" is shared.
Shared storage check was successful on nodes "dbgs1c01,dbgs2c01".
Verification of shared storage accessibility was successful.
$
SSH and host equivalence
$ /app/oracle/clusterware/cluvfy/runcluvfy.sh stage -pre crsinst -n dbgs1c01,dbgs2c01
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "dbgs1c01".
Checking user equivalence...
User equivalence check passed for user "oracle".
Checking administrative privileges...
User existence check passed for "oracle".
Group existence check passed for "oinstall".
Membership check for user "oracle" in group "oinstall" [as Primary] passed.
Administrative privileges check passed.
Checking node connectivity...
Node connectivity check passed for subnet "172.16.52.0" with node(s) dbgs1c01,dbgs2c01.
Node connectivity check passed for subnet "10.0.0.0" with node(s) dbgs1c01,dbgs2c01.
Suitable interfaces for the private interconnect on subnet "172.16.52.0":
dbgs1c01 eth0:172.16.52.124
dbgs2c01 eth0:172.16.52.125
Suitable interfaces for the private interconnect on subnet "10.0.0.0":
dbgs1c01 eth1:10.0.0.1
dbgs2c01 eth1:10.0.0.2
ERROR:
Could not find a suitable set of interfaces for VIPs. <--- Ref Metalink Doc. 338924.1
Node connectivity check failed.
Checking system requirements for 'crs'...
No checks registered for this product.
Pre-check for cluster services setup was unsuccessful on all the nodes.
$
Permissions
$ ls -ltr /dev/sda4
brw-rw---- 1 root dba 8, 4 Jul 4 19:03 /dev/sda4
Regards,
Edited by: Jamb on Jul 9, 2009 3:08 PM

Trouble installing Flash 10 with Mac OSX 10.5.8

I have a Powerbook running Mac OSX 10.5.8 and had Flash 8. I was unable to play a video and was directed to the website to update my player. Flash 10 downloaded without difficulty but when I tried to install it, I got an error message:
"The following install step failed: run preflight script for Adobe flash Player. Contact the software manufacturer for assistance."
Where can I get this help or what can I do?
Thanks, MJ

Hello,
Flash Player 10.3.183.90 is the last version to support OS X 10.5.8. Go to http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html and download the 10.3.183.90 archive file. Extract the content and use the file flashplayer_10_3r183_90_mac_intel.dmg to install Flash Player on OS X 10.5.8.
Maria

Illustrator CS2 with Mac OSX 10.5.8

So sorry, but I made a mistake in my posting before....I'm running CS2, and not CS3, as I originally thought.
Once again, does anybody know if there are compatibility issues between CS2 and OSX 10.5.8??
I am currently working with CS2 applications on my iMac G5 PowerPC, running OSX 10.4.11
I have a good opportunity to purchase and install an upgrade to OSX 10.5.5. I then plan to use Apple's Software Update to bring it up to the most current version of the OS, whidh I think is 10.5.8
My only concern is whether switching to the more current OS will affect my use of CS3 applications in any way...
(Illustrator, Photoshop, Acrobat, Bridge)
Does anybody know the answer to this?

I've got CS2 installed with OS10.5.8.
I don't use CS2 heavily anymore, but it does launch and has performed some basic operations for me just fine.

Error installing free CS2 with mac

Similar Messages

Maybe you are looking for